Exe run more times by click icon just like VB program?

exe made by labview can run more times just like VB program?
I have completed the program of display the state of my machine through serial port. The program was designed as show only one machine's state, and if more than one machine's state needs to be displayed, i hope the program can run duplicately or triplicately. Can it be realized?
Can dynamically called subvi(set ad reentrant vi) solve my problem?
When i try to run the same subvi with invoke (run vi method),the "Error 1000 occurred at Invoke Node" appeared.
If the dynamically called subvi can do, subvis of subvi need to be set as reentrant too? subvis of subvi don't need to share information between different machine.

The 'subsubVIs' may or may not be a problem. It depends greatly on what they are and what they do. In some cases, making them re-entrant will help. You should read the shipping document called Using LabVIEW to Create Multithreaded VIs for Maximum Performance and Reliability. There is a section in there on re-entrant VIs. There also have been numerous threads in this forum on the subject.

Similar Messages

Error in sql query as "loop has run more times than expected (Loop Counter went negative)"

Hello,
When I run the query as below
DECLARE @LoopCount int
SET @LoopCount = (SELECT Count(*) FROM KC_PaymentTransactionIDConversion with (nolock) Where KC_Transaction_ID is NULL and TransactionYear is NOT NULL)
WHILE (
   SELECT Count(*)
   FROM KC_PaymentTransactionIDConversion with (nolock)
   Where KC_Transaction_ID is NULL
   and TransactionYear is NOT NULL
) > 0
BEGIN
   IF @LoopCount < 0
       RAISERROR ('Issue with data in KC_PaymentTransactionIDConversion, loop has run more times than expected (Loop Counter went negative).', -- Message text.
               16, -- Severity.
               1 -- State.
SET @LoopCount = @LoopCount - 1
end
I am getting error as "loop has run more times than expected (Loop Counter went negative)"
Could any one help on this issue ASAP.
Thanks ,
Vinay

Hi Vinay,
According to your code above, the error message make sense. Because once the value returned by “SELECT Count(*) FROM KC_PaymentTransactionIDConversion with (nolock) Where KC_Transaction_ID is NULL and TransactionYear is NOT NULL” is bigger than 0,
then decrease @LoopCount. Without changing the table data, the returned value always bigger than 0, always decrease @LoopCount until it's negative and raise the error.
To fix this issue with the current information, we should make the following modification:
Change the code
WHILE (
SELECT Count(*)
FROM KC_PaymentTransactionIDConversion with (nolock)
Where KC_Transaction_ID is NULL
and TransactionYear is NOT NULL
) > 0
To
WHILE @LoopCount > 0
Besides, since the current query is senseless, please modify the query based on your requirement.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Why does crontab running more times ?

I have crontab in the following， want to run myapp.pl "Every 5 min between 13:00 and 15:00" .
#Minute Hour   Day    Month Dayofweek command
#update daily tractions data
*/5    13-15    *    *    1-5        myapp.pl
But from the log file following I found myapp.pl run more times than I had expected.
Log:
   started on 2014-01-23 15:05:01
   started on 2014-01-23 15:10:01
   started on 2014-01-23 15:15:01
   started on 2014-01-23 15:20:01
   started on 2014-01-23 15:25:00
   started on 2014-01-23 15:30:01
   started on 2014-01-23 15:35:02
Any ideas? Thanks.
Btw I dont want to use Launch Agent something.

That will lost the time 15:00 .
Probably I should write:
*/5 13-14 * * 1-5 myapp.pl
0        15          * * 1-5 myapp.pl

Recently my mac has started making faint clicking noises just like a fan catching something as it spins round, it is only faint but i can notice it -any suggestions please

Recently my mac has started making faint clicking noises just like a fan catching against something, it is only faint but loud enough to hear. any suggestions please

While it could be a cooling fan, a noise like that is usually a sign of a dying hard drive. Back up everything immediately. Make immediate backups of any new documents you create after the full backup.

WorkFlow Back Ground Process Running More Time

Hi all,
I have very Big problem it is occured in production i need help vary urgent for this .
Work flow Back Ground Process Running More than 5 hrs,actualy Daily it is running only below 2 min .but yesterday onwords it is running more than 5 hrs.but this workflow back ground process running long time only one item_type='REQAPPRV' REMAING item_types running normaly.
i did have any root cause for this performance issue plz let me know any one for this problem what is the root cause.
Thank's

Reddy,
Go through the following documents, it should be helpful in troubleshooting the issue.
Note: 186361.1 - WF 2.x: Workflow Background Process Performance Troubleshooting Guide
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=186361.1
Note: 298550.1 - Troubleshooting Workflow Data Growth Issues
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=298550.1
Note: 566577.1 - Workflow Background Process Has Significant Performance Issues
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=566577.1
Note: 743338.1 - Performance Degradation when the Workflow Background Process is Running
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=743338.1
Note: 734425.1 - How To Generate Performance Trace for Workflow Background Process?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=734425.1
If this is your production instance and the issue is urgent, I would suggest you log a SR.
Regards,
Hussein

How can i run java application at system startup just liks as services

How we can run java application at the time of system
starts up just like as services.

Hi,
At first you have to create an exe of the class file.
for that go to the site www.duckware.com/java2exe.html
Click on the j2exe23c.exe(75k) download it and install in ur system. convert the class file to windows exe.
The put the exe in the startup folder in windows.
If ur not able to find that folder search for it and put that exe in that folder.

I keep getting pop ups saying that my subscription has expired? I have paid and have credit because this has happened before and I paid 3 times. Can I just download the programs rather than pay a monthly charge?

I keep getting pop ups that say my subscription has expired? I have paid and have credit because this has happened before and i paid 3 times. Can I just buy a download instead of paying a monthly subscription?

We often find this happens when the wrong software gets run (so the subscription doesn't apply).
So,to start with what exactly is your subscription for - please check your account details and confirming email?

Re: WorkFlow Back Ground Process Running More Time

Hi ,
I have a similar situation where Workflow Background Process is running for hours during peak business hours only for item type REQAPPRV.
Can you please suggest the action plan taken in your case.
Thanks,

user12558002 wrote:
Hi ,
I have a similar situation where Workflow Background Process is running for hours during peak business hours only for item type REQAPPRV.
Can you please suggest the action plan taken in your case.
Thanks,Please post the details of the application release, database version and OS.
Was this working before? If yes, any changes been done recently?
Can you find any errors in the CM/Workflow/DB log files?
Please see the following docs.
Workflow Background Process Hangs on Deferred = Yes and OM Order Line [ID 817642.1
Running "Workflow Background Process" During Day Time Hangs For 'OM Order Line' Parameter [ID 564504.1
WF 2.x: Workflow Background Process Performance Troubleshooting Guide [ID 186361.1]
How to Recreate a Corrupted Workflow Background Queue WF_Deferred_Table_M [ID 1176723.1]
Workflow Background Process Takes Long Time to Run After Conversion To ATG Rup5 DB 10g [ID 469702.1]
11.5.10.4: Workflow Background Process Seems To Take Longer After RUP.4 [ID 560144.1]
Performance Degradation when the Workflow Background Process is Running [ID 743338.1]
How Often or Frequent Should You Run Workflow Background Process to Improve Performance for Deferred OEOL? [ID 1308607.1]
Thanks,
Hussein

PSE 5 clicking icon does not open program

I had to reinstall PSE 5 on my computer [Dell Dimension E310 Windows XP]. Adobe gave me a url to download the program as my original CD did not work [nothing happened when I put the CD into my computer]I downloaded the program but when I double click the icon for PSE 5 I get what is in the program [such as images, popup, help etc.] The program itself does not open. Can you help?
Thanks
Leonard Hodes

PSE 5 Reinstallation
I had to reinstall PSE 5 on my computer. It is no longer supported by adobe. They gave me a file to download the program, however when I tried to open the program after the installation I got a dialog box which in the blue bar at the top which says Photoshopelements_5.0_en_us. Inside the box there is a big list of files with icons in front of them. For examle cc_01_popup or pse_get_gp etc.
If you went into "my computer" and opened program files and clicked on a program the dialog box that opened would have the same appearance.
Leonard Hodes

Clicking Drill Down Plus Sympol its taking more time

Hi ,
In my drill-down report having 2000 records while initially it takes 25 seconds to render the report after that when i click Plus symbol it takes again 20 secs to display the data.My question is in drill-down report for loading data it will hit one
time to fetch data.So why its taking more time while clicking plus symbol the data already exits in datasets.
So please tell me where i am doing mistake.
Regards,
HariKan

Hi HariKan,
According to your description, when you preview the drill down report, after you click plus sign, it takes 20 seconds to expand the detail information.
The total time to generate a reporting server report (RDL) can be divided into 3 elements:
TimeDataRetrieval: The time needed for SQL Server to retrieve the data of all datasets in your report.
TimeProcessing: The number of milliseconds spent in the processing engine for the request.
TimeRendering: The time spent after the Rendering Object Model is exposed to the rendering extension.
After you click plus sign, Report rendering occurs after data and layout are combined into an interim format and then passed to a rendering extension. The time includes:
Time spent in renderer.
Time spent in width and height of report items.
Time spent in paging.
Time spent in all expression evaluation.
For more information about report processing, please refer to the following document:
http://blogs.msdn.com/b/robertbruckner/archive/2009/01/05/executionlog2-view.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

In SQL Trace how to see which statement getting more time .

Hi Expart,
In SQL Trace (T-code ST05) . I am running the standard transaction . how to see which statement
running more time and less time . suppose one statement running more time so how resolve the
performance .
Plz. reply me
Regards
Razz

> The ones in 'RED' color are the statement which are taking a lot of time and you need to
> optimise the same.
No, that is incorrect, the red ones show only the ones which need several hundret milliseconds in one execution. This can even be correct for hard tasks. And there are lots of problem, which you will not see
I have said everything here:
SQL trace:
/people/siegfried.boes/blog/2007/09/05/the-sql-trace-st05-150-quick-and-easy
Go to 'Tracelist' -> Summarize by SQL statements', this is the view which you want to see!
I summarizes all executions of the same statement.
There are even the checks explained, the slow ones are the one which need a lot of time per record!
See MinTime/Rec > 10.000 microseconds.
Check all number of records, executions, buffer, identicals.
The SE30 Tipps and Tricks will not help much.
Siegfried

Firefox will no longer start. Already updated, and now it will not start. Uninstalled, reinstalled (numerous times). Click the icon and nothing. Hour glass comes up for a second and then it is gone. Running XP ver 5.1 (service pack 3)

Firefox will no longer run on my computer. It's been working fine up until a few days ago. Installed the updates and now nothing. Uninstalled, reinstalled (numerous times). Click the icon and nothing. Hour glass comes up for a second and then it is gone. Running XP ver 5.1 (service pack 3) edit. I'm no techie so I have no clue what is causing this or what to do. I love firefox and miss it greatly. Anyone know what I can do to get it back?

Can you install a new profile? See [[Managing Profiles]] for me details and let us know if you need additional assistance.

Just downloaded LR 2015 from creative cloud and when I click icon to run it flashes in and out and will not open. I have a macbook pro 13" retina

Just downloaded LR 2015 from creative cloud and when I click icon to run it flashes in and out and will not open. I have a macbook pro 13" retina

Hi Frank,
You can follow the article: Sign in, Sign out | Creative Cloud desktop app to sign out and sign in back again to Creative Cloud and try to launch your Lightroom 2015 application.
Let us know if it works or not.
Thanks,
Ratandeep Arora

I just upgraded to Mavericks and now my Intel iMac is running more slowly. There have been no other changes. What's up with this???

I just upgraded to Mavericks and now my Intel iMac is running more slowly. There have been no other changes. What's up with this???

This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPHardwareDataType | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | grep -v 'ag$' | tail | awk -F_ '{$NF=a[split($NF,a,".")]; print}'`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`find -L {/,}L*/Lau* -type f -exec sh -c 'file -b "$1" | grep -qw XML' {} {} \; -print | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`find -L /{S*/,}L*/Star* -type f -exec sh -c 'file -b "$1" | egrep -q "XML|bin|exec"' {} {} \; -print`; Pm "StartupItems"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

HT5137 I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?

I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?

Personally, I would never use a debit card online, for security reasons. If your card gets hacked its your money that is stolen. At least with a credit card it is the card providers money that is stolen.
Anyway, I would delete the app and re-install. If you paid for the app in the first place you will be able to re-install free of charge. Also, the app should allow the in-app purchase to happen again as it should recognise that you have already purchased it previously.
Finally, it might be that the 3G doesnt have as much ram as more recent models of iphone and you may have applications running in the background that are preventing the app to function with the in-app purchase unless you shut down any apps eating all you memory that are running in the background. Shut-down these apps (and the simpson tap out app) by exiting to your home screen and double-tapping the home button to show what apps are running in the background. press and hold any of the open apps until it starts shaking. close all the apps down. exit then re-launch the app.
good luck.

Exe run more times by click icon just like VB program?

Similar Messages

Maybe you are looking for