Exec authorization with radius..
Hi guys, i was configuring auth-proxy . i had a
m/c---(inside)router(outside)---internet
now i want that a normal user is not able to get the telnet access of my router, only certain users can have the telnet access fromt the inside. i dont want to use NAR. i want to do this only with radius authorization.
i was looking for controlling the access of the users to the router with the help of radius,
aaa authorization exec default group tacacs+
when i use the above command i knw that i can control the shell access by checking shell box,but when i use the below command
aaa authorization exec default group radius
i was not able to find any particular radius av-pair which can control the exec shell access in respect to the above one.
Hi,
Make use of this,
shell:priv-lvl=15
shell:autocmd=exit
So what will happen with this is, as soon as user tries to log into shell, BOOM!, user will exit out.
NOTE: I have not tried this exactly, but should work, you might be required to use separator, ";" i.e.,
shell:priv-lvl=15;
shell:autocmd=exit
Regards,
Prem
Similar Messages
-
AAA Authorization with RADIUS and RSA SecurID Authentication Manager
Hi there.
I am in the process of implementing a new RSA SecurID deployment, and unfortunately the bulk of the IOS devices here do not support native SecurID (SDI) protocol. With the older RSA SecurID deployment version, it supported TACACS running on the system, now in 8.x it does not. Myself, along with RSA Support, are having problems getting TACACS working correctly with the new RSA Deployment, so the idea turned to possibly just using RADIUS
I have setup the RADIUS server-host, and configured the AAA authentication and authorization commands as follows:
#aaa new-model
#radius-server host 1.1.1.1 timeout 10 retransmit 3 key cisco123!
#aaa authentication login default group radius enable
#aaa authorization exec default group radius local
I have also tried
#aaa authorization exec default group radius if-authenticated local
I can successfully authenticate via SSH to User Mode using my SecurID passcode -- however, when I go to enter Priv Exec mode, it wont take the SecurID passcode - I just get an "access denied"
I've ran tcpdump on the RSA Primary Instance, looking for 1645/1646 traffic, and I dont get anything
I've turned on RADIUS debugging on the IOS device, and I dont get anything either
I did see this disclaimer in a Cisco doc: "The RADIUS method does not work on a per-username basis." -- not sure if this is related to my issue?
I'm beginning to wonder if IOS/AAA cant pass authorization-exec process to RSA SecurIDI don't have a solution, but can confirm I have the same problem and am also trying to find a solution.
I see no data sent to the RSA server when using the wireless AP. With other equipment on the same ACS, I do see the attempts going to the RSA server.
The first reply doesn't seem to apply to me, since it's not sending a request from the ACS machine to the RSA machine. -
ISDN Authorization with RADIUS using ISE 1.1.2
Hi,
I am trying to move my ISDN dialup branches authentication/authorization from old ACS 4.1 to ISE appliance. Before it was through ACS 4.2 with TACACS protocol but now since we are moving to ISE we are moving them to ISE with radius.
Problem is that isdn client gets authenticated and authorized but calls get dropped and they dont able to communicate with HO. IP address is assigned by Head End router to all remote isdn dialing branches..
I have used default "PermitAccess" in authorization policy and authentication policy is also default. I dont understand where I am going wrong as authentication and authorization is sucessful.
aaa authentication ppp default group radius local
aaa authentication network default group radius
aaa accounting network default start-stop group radius
radius-server host 12.18.22.41
radius-server key *****
below is the router configuration for AAA
can any one help in thisCoA is not needed, nor supported for ISDN aaa, i used ACS 3.3 for this a long time ago. I think you should do some debugging if ise does not give you any errors.
try doing some debug aaa / debug radius & deb ppp nego if your calls are authenticated and ip is assigned to the calling router, you should see some disconnect reason in the debug. -
Configuring Cisco ISE for Authorization with External Radius Server attribute
Hi,
I'm trying to integrate an external radius server with Cisco ISE.
I created an External Identity Store>Radius Token Server.
I created a Identity Store sequence with just one identity store just as creadted above.
And I was able to authenticate successfully.
But when it comes to authorization.
I observed we just have one tab named Authorization while creating Radius Token server.
And it always refers to ACS:attribute_name.
If I want to define a IETF radius attribute, (lets say class with attribute id as 25), how could I do it.
In Cisco ACS we have a direct entry option in authorization tab where we can define the radius (IETF) attribute within Radius token server creation (within radius token server>Directory attribute tab).
How ever I try to define the IETF attribute here (class,IETF:Class) I am not able to authorize with this attribute value.
I tried with just one single authorization rule where it could hit.But observed it to go the default(as none of the rules defined matches the condition).
Can anyone guide me how can we define a IETF radius attribute for authorization within Cisco ISE and what policy could we set it to work as authorization.
Thanks in advance
Senthil KThis is the step of Creating and Editing RADIUS Vendors
To create and edit a RADIUS vendor, complete the following steps:
Step 1 From the Administration mega menu, choose Resources > RADIUS Vendors.
The RADIUS Vendors page appears with a list of RADIUS vendors that ISE supports.
Step 2 Click Create to create a new RADIUS vendor or click the radio button next to the RADIUS vendor that
you want to edit and click Edit.
Step 3 Enter the following information:
• Name—(Required) Name of the RADIUS vendor.
• Description—An optional description for the vendor.
• Vendor ID—(Required) The Internet Assigned Numbers Authority (IANA)-approved ID for the
vendor.
• Vendor Attribute Type Field Length—(Required) The number of bytes taken from the attribute value
to be used to specify the attribute type. Valid values are 1, 2, and 4. The default value is 1.
• Vendor Attribute Size Field Length—(Required) The number of bytes taken from the attribute value
to be used to specify the attribute length. Valid values are 0 and 1. The default value is 1.
Step 4 Click Submit to save the RADIUS vendor. -
Aironet 2702i Autonomous - Web-Authentication with Radius Window 2008
Hi Guys,
I have a problems with case, i have diagrams sample like then : AD(Win2008) - Radius(Win2008) - Aironet 2702i => Use methods Web-Auth for EndUser
This is my Configure file on Aironet 2702i
Aironet2702i#show run
Building configuration...
Current configuration : 8547 bytes
! Last configuration change at 05:08:25 +0700 Fri Oct 31 2014 by admin
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Aironet2702i
logging rate-limit console 9
aaa new-model
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login default local
aaa authentication login DTSGROUP group radius
aaa authentication login webauth group radius
aaa authentication login weblist group radius
aaa authentication dot1x default group radius
aaa authorization exec default local
aaa session-id common
clock timezone +0700 7 0
no ip source-route
no ip cef
ip admission name webauth proxy http
ip admission name webauth method-list authentication weblist
no ip domain lookup
ip domain name dts.com.vn
dot11 syslog
dot11 activity-timeout unknown default 1000
dot11 activity-timeout client default 1000
dot11 activity-timeout repeater default 1000
dot11 activity-timeout workgroup-bridge default 1000
dot11 activity-timeout bridge default 1000
dot11 vlan-name DTSGroup vlan 46
dot11 vlan-name L6-Webauthen-test vlan 45
dot11 vlan-name NetworkL7 vlan 43
dot11 vlan-name SGCTT vlan 44
dot11 ssid DTS-Group
vlan 46
authentication open eap DTSGROUP
authentication key-management wpa version 2
mbssid guest-mode
dot11 ssid DTS-Group-Floor7
vlan 43
authentication open
authentication key-management wpa version 2
mbssid guest-mode
wpa-psk ascii 7 013D03104C0414040D4D5B5E392559
dot11 ssid L6-Webauthen-test
vlan 45
web-auth
authentication open
dot1x eap profile DTSGROUP
mbssid guest-mode
dot11 ssid SaigonCTT-Public
vlan 44
authentication open
authentication key-management wpa version 2
mbssid guest-mode
wpa-psk ascii 7 04480A0F082E424D1D0D4B141D06421224
dot11 arp-cache optional
dot11 adjacent-ap age-timeout 3
eap profile DTSGROUP
description testwebauth-radius
method peap
method mschapv2
method leap
username TRIHM privilege 15 secret 5 $1$y1J9$3CeHRHUzbO.b6EPBmNlFZ/
username ADMIN privilege 15 secret 5 $1$IvtF$EP6/9zsYgqthWqTyr.1FB0
ip ssh version 2
bridge irb
interface Dot11Radio0
no ip address
encryption vlan 44 mode ciphers aes-ccm
encryption vlan 46 mode ciphers aes-ccm
encryption mode ciphers aes-ccm
encryption vlan 43 mode ciphers aes-ccm
encryption vlan 1 mode ciphers aes-ccm
ssid DTS-Group
ssid DTS-Group-Floor7
ssid L6-Webauthen-test
ssid SaigonCTT-Public
countermeasure tkip hold-time 0
antenna gain 0
stbc
mbssid
packet retries 128 drop-packet
channel 2412
station-role root
rts threshold 2340
rts retries 128
ip admission webauth
interface Dot11Radio0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 subscriber-loop-control
bridge-group 43 spanning-disabled
bridge-group 43 block-unknown-source
no bridge-group 43 source-learning
no bridge-group 43 unicast-flooding
interface Dot11Radio0.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 subscriber-loop-control
bridge-group 44 spanning-disabled
bridge-group 44 block-unknown-source
no bridge-group 44 source-learning
no bridge-group 44 unicast-flooding
ip admission webauth
interface Dot11Radio0.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 subscriber-loop-control
bridge-group 45 spanning-disabled
bridge-group 45 block-unknown-source
no bridge-group 45 source-learning
no bridge-group 45 unicast-flooding
ip admission webauth
interface Dot11Radio0.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 subscriber-loop-control
bridge-group 46 spanning-disabled
bridge-group 46 block-unknown-source
no bridge-group 46 source-learning
no bridge-group 46 unicast-flooding
interface Dot11Radio1
no ip address
shutdown
encryption vlan 46 mode ciphers aes-ccm
encryption vlan 44 mode ciphers aes-ccm
encryption vlan 1 mode ciphers aes-ccm
encryption vlan 43 mode ciphers aes-ccm
encryption vlan 45 mode ciphers ckip-cmic
ssid DTS-Group
ssid DTS-Group-Floor7
ssid SaigonCTT-Public
countermeasure tkip hold-time 0
antenna gain 0
peakdetect
dfs band 3 block
stbc
mbssid
packet retries 128 drop-packet
channel 5745
station-role root
rts threshold 2340
rts retries 128
interface Dot11Radio1.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 subscriber-loop-control
bridge-group 43 spanning-disabled
bridge-group 43 block-unknown-source
no bridge-group 43 source-learning
no bridge-group 43 unicast-flooding
interface Dot11Radio1.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 subscriber-loop-control
bridge-group 44 spanning-disabled
bridge-group 44 block-unknown-source
no bridge-group 44 source-learning
no bridge-group 44 unicast-flooding
ip admission webauth
interface Dot11Radio1.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 subscriber-loop-control
bridge-group 45 spanning-disabled
bridge-group 45 block-unknown-source
no bridge-group 45 source-learning
no bridge-group 45 unicast-flooding
ip admission webauth
interface Dot11Radio1.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 subscriber-loop-control
bridge-group 46 spanning-disabled
bridge-group 46 block-unknown-source
no bridge-group 46 source-learning
no bridge-group 46 unicast-flooding
interface GigabitEthernet0
no ip address
duplex auto
speed auto
dot1x pae authenticator
dot1x authenticator eap profile DTSGROUP
dot1x supplicant eap profile DTSGROUP
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 spanning-disabled
no bridge-group 43 source-learning
interface GigabitEthernet0.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 spanning-disabled
no bridge-group 44 source-learning
interface GigabitEthernet0.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 spanning-disabled
no bridge-group 45 source-learning
interface GigabitEthernet0.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 spanning-disabled
no bridge-group 46 source-learning
interface GigabitEthernet1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet1.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet1.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 spanning-disabled
no bridge-group 43 source-learning
interface GigabitEthernet1.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 spanning-disabled
no bridge-group 44 source-learning
interface GigabitEthernet1.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 spanning-disabled
no bridge-group 45 source-learning
interface GigabitEthernet1.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 spanning-disabled
no bridge-group 46 source-learning
interface BVI1
mac-address 58f3.9ce0.8038
ip address 172.16.1.62 255.255.255.0
ipv6 address dhcp
ipv6 address autoconfig
ipv6 enable
ip forward-protocol nd
ip http server
ip http authentication aaa
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server attribute 32 include-in-access-req format %h
radius server 172.16.50.99
address ipv4 172.16.50.99 auth-port 1645 acct-port 1646
key 7 104A1D0A4B141D06421224
bridge 1 route ip
line con 0
logging synchronous
line vty 0 4
exec-timeout 0 0
privilege level 15
logging synchronous
transport input ssh
line vty 5 15
exec-timeout 0 0
privilege level 15
logging synchronous
transport input ssh
end
This is My Logfile on Radius Win 2008 :
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID: S-1-5-21-858235673-3059293199-2272579369-1162
Account Name: xxxxxxxxxxxxxxxx
Account Domain: xxxxxxxxxxx
Fully Qualified Account Name: xxxxxxxxxxxxxxxxxxx
Client Machine:
Security ID: S-1-0-0
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: -
Calling Station Identifier: -
NAS:
NAS IPv4 Address: 172.16.1.62
NAS IPv6 Address: -
NAS Identifier: Aironet2702i
NAS Port-Type: Async
NAS Port: -
RADIUS Client:
Client Friendly Name: Aironet2702i
Client IP Address: 172.16.1.62
Authentication Details:
Connection Request Policy Name: Use Windows authentication for all users
Network Policy Name: DTSWIRELESS
Authentication Provider: Windows
Authentication Server: xxxxxxxxxxxxxx
Authentication Type: PAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 66
Reason: The user attempted to use an authentication method that is not enabled on the matching network policy.
So i will explain problems what i have seen:
SSID: DTS-Group using authentication EAP with RADIUS and it working great (Authentication Type from Aironet to RADIUS is PEAP)
SSID:L6-Webauthen-test using web-auth and i had try to compare with RADIUS but ROOT CAUSE is AUTHENTICATION TYPE from Aironet to RADIUS default is PAP. (Reason Code : 66)
=> I had trying to find how to change Authentication Type of Web-Auth on Cisco Aironet from PAP to PEAP or sometime like that for combine with RADIUS.
Any idea or recommend for me ?
Thanks for see my caseHi Dhiresh Yadav,
Many thanks for your reply me,
I will explain again for clear my problems.
At this case, i had setup complete SSID DTS-Group use authentication with security as PEAP combine Radius Server running on Window 2008.
I had login SSID by Account create in AD => It's work okay with me. Done
Problems occurs when i try to use Web-authentication on Vlan45 With SSID :
dot11 ssid L6-Webauthen-test
vlan 45
web-auth
authentication open
dot1x eap profile DTSGROUP
mbssid guest-mode
After configured on Aironet and Window Radius , i had try to login with Account create in AD by WebBrowser but it Fail ( i have see mini popup said: Authentication Fail" . So i go to Radius Server and search log on EventViewer.
This is My Logfile on Radius Win 2008 :
Network Policy Server denied access to a user.
NAS:
NAS IPv4 Address: 172.16.1.62
NAS IPv6 Address: -
NAS Identifier: Aironet2702i
NAS Port-Type: Async
NAS Port: -
RADIUS Client:
Client Friendly Name: Aironet2702i
Client IP Address: 172.16.1.62
Authentication Details:
Connection Request Policy Name: Use Windows authentication for all users
Network Policy Name: DTSWIRELESS
Authentication Provider: Windows
Authentication Server: xxxxxxxxxxxxxx
Authentication Type: PAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 66
Reason: The user attempted to use an authentication method that is not enabled on the matching network policy.
Im think ROOT CAUSE is :
PAP is the default authentication type for web-auth users on Aironet 2702i, so it can't combine with Radius Window 2008 because they just support PEAP (CHAPv1,CHAPv2....) => Please give me a tip how to change Authentication Type from PAP to PEAP for Web Authentication on Aironet -
Aaa authorization with Funk SBR EE
Hello,
I do not get aaa authorization with Funk SBR EE to work.
On our cisco switches I configure:
aaa authentication default group radius local
aaa authorization exec default radius local
On the Funk radius server I return
service-type login
Cisco-AVPAIR shell:priv-lvl=15
Authorization always fails and the debug output shows:
1063433: 46w0d: CLUSTER_MEMBER_1: RADIUS: ustruct sharecount=1
1063434: 46w0d: CLUSTER_MEMBER_1: RADIUS: Initial Transmit tty3 id 60 [**radius-ip**}:1812, Access-Request, len 82
1063435: 46w0d: CLUSTER_MEMBER_1: Attribute 4 6 C3A976E2
1063436: 46w0d: CLUSTER_MEMBER_1: Attribute 5 6 00000003
1063437: 46w0d: CLUSTER_MEMBER_1: Attribute 61 6 00000005
1063438: 46w0d: CLUSTER_MEMBER_1: Attribute 1 9 66726974
1063439: 46w0d: CLUSTER_MEMBER_1: Attribute 31 17 3139352E
1063440: 46w0d: CLUSTER_MEMBER_1: Attribute 2 18 8772DAFD
1063441: 46w0d: CLUSTER_MEMBER_1: RADIUS: Received from id 60 [**radius-ip**]:1812, Access-Accept, len 87
1063442: 46w0d: CLUSTER_MEMBER_1: Attribute 25 67 53425232
1063443: 46w0d: CLUSTER_MEMBER_1: RADIUS: saved authorization data for user 111BFD8 at D4E310
1063444: 46w0d: CLUSTER_MEMBER_1: tty3 AAA/AUTHOR/EXEC (3848954035): Port='tty3' list='' service=EXEC
1063445: 46w0d: CLUSTER_MEMBER_1: AAA/AUTHOR/EXEC: tty3 (3848954035) user='username'
1063446: 46w0d: CLUSTER_MEMBER_1: tty3 AAA/AUTHOR/EXEC (3848954035): send AV service=shell
1063447: 46w0d: CLUSTER_MEMBER_1: tty3 AAA/AUTHOR/EXEC (3848954035): send AV cmd*
1063448: 46w0d: CLUSTER_MEMBER_1: tty3 AAA/AUTHOR/EXEC (3848954035): found list "default"
1063449: 46w0d: CLUSTER_MEMBER_1: tty3 AAA/AUTHOR/EXEC (3848954035): Method=radius (radius)
1063450: 46w0d: CLUSTER_MEMBER_1: RADIUS: no appropriate authorization type for user.
1063451: 46w0d: CLUSTER_MEMBER_1: AAA/AUTHOR (3848954035): Post authorization status = FAIL
1063452: 46w0d: CLUSTER_MEMBER_1: AAA/AUTHOR/EXEC: Authorization FAILED
1063453: 46w0d: CLUSTER_MEMBER_1: AAA/MEMORY: free_user (0x111BFD8) user='username' ruser='' port='tty3' rem_addr='[**client-ip**]' authen_type=ASCII service=LOGIN priv=1
What do I need to add to the radius server to make it work?
--JoergThe document Common Problems in Debugging RADIUS, PAP and CHAP has more information on the debug outputs.
http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a0080093f4b.shtml#radnpap -
How to configure ACS to authenticate Modem with radius
Hi,
How do I configure ACS to authenticate and authorize modem users with radius. My problem is with authorization(authentication is ok in the debug). Do I need to configure specific Av pairs (006 and 007 in IETF)Hi Dominic,
Are we have Microsoft radius server or ACS?
Yes, these attributes should be configured.
006-service-type: login
007-framed-protocol: PPP
HTH
JK -
ASA , Cisco VPN client with RADIUS authentication
Hi,
I have configured ASA for Cisco VPN client with RADIUS authentication using Windows 2003 IAS.
All seems to be working I get connected and authenticated. However even I use user name and password from Active Directory when connecting with Cisco VPN client I still have to provide these credentials once again when accessing domain resources.
Should it work like this? Would it be possible to configure ASA/IAS/VPN client in such a way so I enter user name/password just once when connecting and getting access to domain resources straight away?
Thank you.
Kind regards,
AlexHi Alex,
It is working as it should.
You can enable the vpn client to start vpn before logon. That way you login to vpn and then logon to the domain. However, you are still entering credentials twice ( vpn and domain) but you have access to domain resources and profiles.
thanks
John -
If I have additional music on my second computer that I authorize with iTunes Match, How do I upload it to iCloud?
check out this post by Zevoneer.
-
Transport roles and analysis authorization with user assigned
Hi expert,
I face with this problem transport roles and analysis authorization with user assigned. When I have created a transport request to move the roles and analysis authorization from development system to test system. I couldnu2019t maintain the user assigned, after transport I have to assigned manually all of user or create a program to fill AGR_USER table or there are other way.
Thanks for your time,
LuisHi,
In role administration, you have the following options for transporting roles:
You can download the roles from one system and upload them into another
You can import the role from a remote system using RFC
You can transport the roles with the transport function.
Role upload loads all role data, including authorization data from a file into the SAP system. The user assignments for the role and the generated profiles for the role are exceptions in this case.
Transporting Roles with the Role Transport Function
1. Start the role administration function by choosing Tools ® Administration ® User Maintenance ® Role Administration ® Roles (transaction PFCG).
2. Enter the role to be transported and choose Transport Role.
The Mass Transport of Roles screen appears. You can control the default settings for the options Also transport single roles for composite roles and Also transport generated profiles for roles using Customizing switches (see Role Administration Functions in the section Functions of the Utilities Menu).
You should not change the authorizations profiles of the role after you have included the role in a transport request. If you need to change the profiles or generate them for the first time, transport the entire role again afterwards.
For more information go thrpugh the below link
http://help.sap.com/saphelp_nw70/helpdata/EN/6d/7c8cfd410ea040aadf92e1f78107a4/content.htm
Regards,
Marasa. -
How can I authenticate and authorize with Web Service on ESB ?
Hello,
I want to authenticate and authorize client with Web Service published
by HTTP/SOAP BC.
Simply if it is an Web Service as J2EE application, I will use
Basic Authentication with JAX-RPC and Realm.
But I think that Web Service published by HTTP/SOAP BC is not belong
to J2EE Application. Threre is no place to describe security role mapping
(like web.xml).
JBI 1.0 the section "5.5.1.1.3 Normalized Message Properties" comments
JAAS Subject is given in the NM Properties. Really in this package
com.sun.jbi.internal.security.*
implements JAAS autentication and authorization (at JaasAuthenticator).
But I can't see how to configure my Service to use this.
How can I authenticate and authorize with Web Service on ESB ?
I referred to the resources.
Mutual Authentication for Web Services: A Live Example
http://developers.sun.com/prodtech/appserver/reference/techart/mutual_auth.html
XML and Web Services Security
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security7.html
JAAS Authentication Tutorial
http://java.sun.com/j2se/1.4.2/docs/guide/security/jaas/tutorials/GeneralAcnOnly.html
Thanks,
Takurou
- environment ---------------------------------------------
OpenESB : Project Open ESB Starter Kit
AppServer : Sun Java Systems Application Server 9.0 PE
OS : Windows XP
I don't assume to use SSL (if It's necessary I will try).
User information is stored in a LDAP Server.
-----------------------------------------------------------Hello,
I read this resource.
SecurityDesign
http://www.glassfishwiki.org/jbiwiki/Wiki.jsp?page=SecurityDesign
Then I think [non-ssl and ssl/tls and so on] securing by basic authentication is ongoing feature at this time.
But I can't see well why this page comments 'HTTP over SSL, TLS'.
HTTP/SOAP Binding Component Overview
http://download.java.net/general/open-esb/docs/jbi-components/httpsoap-bc.html
Does BC support only "SSL server authentication" ?
Doesn't BC support "SSL client authentication" by username/password ?
Thanks,
Takurou -
Cisco PI 1.3 - Internal Server Error with RADIUS-authentication
Hi,
I have a problem with a Cisco Prime Infrastructure 1.3 (Appliance, fully patched) that I'm trying to authenticate against a Radiator RADIUS-server.
From the RADIUS-server's point of view it looks fine, but I just get an HTTP Status 500 internal error (see attached image) when trying to log in.
I'm not the one managing the RADIUS-server but I got the following debug sent from them:
Wed Oct 30 08:52:06 2013: DEBUG: Packet dump:
*** Received from 10.36.0.132 port 17235 ....
Code: Access-Request
Identifier: 102
Authentic: REMOVED
Attributes:
User-Name = "test-user"
User-Password = REMOVED
NAS-IP-Address = 10.36.0.132
Message-Authenticator = REMOVED
Wed Oct 30 08:52:06 2013: DEBUG: Handling request with Handler 'Client-Identifier=/^prime[.]net[.]REMOVED[.]se$/', Identifier 'Network-Prime-AAA'
Wed Oct 30 08:52:06 2013: DEBUG: Deleting session for test-user, 10.36.0.132,
Wed Oct 30 08:52:06 2013: DEBUG: Handling with Radius::AuthUNIX:
Wed Oct 30 08:52:06 2013: DEBUG: Radius::AuthUNIX looks for match with test-user [test-user]
Wed Oct 30 08:52:06 2013: DEBUG: Radius::AuthUNIX ACCEPT: : test-user [test-user]
Wed Oct 30 08:52:06 2013: DEBUG: AuthBy UNIX result: ACCEPT,
Wed Oct 30 08:52:06 2013: DEBUG: Handling with Radius::AuthFILE:
Wed Oct 30 08:52:06 2013: DEBUG: Radius::AuthFILE looks for match with test-user [test-user]
Wed Oct 30 08:52:06 2013: DEBUG: Radius::AuthFILE ACCEPT: : test-user [test-user]
Wed Oct 30 08:52:06 2013: DEBUG: AuthBy FILE result: ACCEPT,
Wed Oct 30 08:52:06 2013: DEBUG: Access accepted for test-user
Wed Oct 30 08:52:06 2013: DEBUG: Packet dump:
*** Sending to 10.36.0.132 port 17235 ....
Code: Access-Accept
Identifier: 102
Authentic: REMOVED
Attributes:
cisco-avpair = "NCS:virtual-domain0=ROOT-DOMAIN"
cisco-avpair = "NCS:role0=Admin"
cisco-avpair = "NCS:task0=View Alerts and Events"
cisco-avpair = "NCS:task1=Device Reports"
..the rest of the AV-pairs removed
Does anyone have any idea on what the the problem is, or some tips on how to troubleshoot? (rebooting and ncs stop/start has no impact on the issue)
//CharlieI ran into a similar issue this morning in my lab. After I issued ncs status - the database service came back as not running. I stop/started the Prime services and it came up. Once all the services were running my WLC imported with no issues. I also deployed another server for another lab and it had issues with the clocking being out of sync.
-
WLC- dynamic Vlan assignment with Radius
Hello, we would like to use this feature in our company and because of that I am now testing it. But I found one problem.
I created one testing SSID and two Vlans on WLC. On ACS I use an IETF atributes (064,065,081) for my account and I am changing Vlan ID (081) during testing.
It works with LEAP but when I use PEAP-GTC (which we use commonly in our company) the ip address is not assigned properly (ip which was assigned before remains).
Could you please help me?There is good document which explains how to configure Dynamic VLAN Assignment with RADIUS Server and Wireless LAN Controller. This will help you. You will find the document at http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml
-
NAC guest server with RADIUS authentication for guests issue.
Hi all,
We have just finally successfully installed our Cisco NAC guest server. We have version 2 of the server and basically the topology consists of a wism at the core of the network and a 4402 controller at the dmz, then out the firewall, no issues with that. We do however have a few problems, how can we provide access through a proxy without using pak files obviously, and is there a way to specify different proxies for different guest traffic, based on IP or a radius attribute etc.
The second problem is more serious; refer to the documentation below from the configuration guide for guest nac server v2. It states that hotspots can be used and the Authentication option would allow radius authentication for guests, I’ve been told otherwise by Cisco and they say it can’t be done, has anyone got radius authentication working for guests.
https://www.cisco.com/en/US/docs/security/nac/guestserver/configuration_guide/20/g_hotspots.html
-----START QUOTE-----
Step 7 From the Operation mode dropdown menu, you can select one of the following methods of operation:
•Payment Provider—This option allows your page to integrate with a payment providing billing system. You need to select a predefined Payment Provider from the dropdown. (Refer to Configuring Payment Providers for details.) Select the relevant payment provider and proceed to Step 8.
•Self Service—This option allows guest self service. After selection proceed to Step 8.
•Authentication—This option allows RADIUS authentication for guests. Proceed to Step 9.
----- END QUOTE-----
Your help is much appreciated on this, I’ve been looking forward to this project for a long time and it’s a bit of an anti climax that I can’t authenticate guests with radius (We use ACS and I was hoping to hook radius into an ODBC database we have setup called open galaxy)
Regards
Kevin WoodhouseWell I will try to answer your 2nd questions.... will it work... yes. It is like any other radius server (high end:)) But why would you do this for guest.... there is no reason to open up a port on your FW and to add guest accounts to and worse... add them in AD. Your guest anchor can supply a web-auth, is able to have a lobby admin account to create guest acounts and if you look at it, it leaves everything in the DMZ.
Now if you are looking at the self service.... what does that really give you.... you won't be able to controll who gets on, people will use bogus info and last but not least.... I have never gotten that to work right. Had the BU send me codes that never worked, but again... that was like a year ago and maybe they fixed that. That is my opinion. -
LDAP (openldap) authorization with DAP (dymamic access policy)
Hello,
We have a asa 5520 and we try to make a ldap (openLdap) authorization with DAP (Dynamic Access Policy). We have problem with logical expression. We need more example of logical expression and we need to know how debug logical expression. We try to use de Debug dap trace and debug dap error but we need more debug informations.Hi
I guess you are using an ldap attribute map, to map the ad group to a group policy. This does not work as you may expect when the user is part of multiple groups, I.e. the user will always be mapped to the same group (first or last in the list, not sure).
Possible solution : remove the ldap attribute map, and configure dap rules that check the ldap.memberOf attribute instead
Hth
Herbert
Sent from Cisco Technical Support iPad App - sorry for the brief explanation, if you need more details let me know.
Maybe you are looking for
-
I curretly use my iphoto library from an large external HD (2 tb) and then have time machine back it up to my airport extreme (which has an external HD attached, 500gb ) Long story short... I am running out of storage space on the 'large external hd
-
Hi, I'm currently living in Canada. I'm wondering if I buy an iPhone 3G and bring it to Switzerland and Italy with me if the GPS will work. I know it will have the GPS signal, but does the iPhone or Apple have maps of Europe?
-
I have been trying to update to iOS5 (on iPhone 3GS and iPad 2) since 1 pm MST yesterday and I am still receiving the "network has timed out" error message. What is the deal? Apple should have expected this kind of traffic on their servers. Am I goi
-
How to create an album of photos from a (photo)book
I have created a photobook in iPhoto. Is it possible to now create an album containing all the images in the photobook - the reverse of creating a book from an album of images? Mac OS X (10.4.3)
-
TV Shows/Movies Won't Play in Vista
I have bought numerous episodes of South Park and Family guy on iTunes, but none of them will play in Vista. I have done some looking around and found this is a common problem. What's the issue? I have spent a ton of money on these episodes and they