Executable built for PDA on Labview 7.1 does not run on PDA

I built an executable in LabView 7.0 using the PDA module. When installed on PDA, works fine. I then built and executable in Labview 7.1 also using the PDA module. I am able to open up the executable on the PDA but does not work. It just hangs. Does anybody have any suggestions. Also, program accesses serial port. I

Hello diltwhiler,
I have tried to create a LabVIEW application that uses the Spreadsheet String to Array function and it appears not to work correctly when using two dimensional arrays. I have reported this to the R&D department for further investigation.
To work around this issue we can use a 1-D array input into the function and then create the 2-D array after converting the data.
Regards,
Matt F
Keep up to date on the latest PXI news at twitter.com/pxi

Similar Messages

Labview 8.2 does not run after reinstallation

Hi everyone,
I have Labview 8.2 (Student License) which was bundled with an engineering textbook. I installed it, activated it but everytime I run the program i get the error "Unable to open resource files" even before I see the splash screen. I have tried almost everything but I cant get it to work. Can someone help me please.
More info if it is of any help:
Last semester my school provided me with a semester long license for Labview 8.2 but I dont remember if it was a Student license. After it expired, I uninstalled the program but it gave me a couple of errors during the uninstall and I had to ignore them to complete the uninstallation process. I reinstalled the version I currently have about 3 times by doing a complete uninstall and a fresh install but that has not helped. I have a feeling this problem has something to do with the old version that did not remove completely. Is there any way (apart for formatting my disk) to remove all trace Labview files and registry keys from my OS? I run Windows XP.
Message Edited by ashishsee on 02-22-2008 10:54 PM

Can you please elaborate? The more you can tell this community, the more we can help.
I just created a VI that wrote a LVM file in 7.1, and I was able to successfully read the same LVM in LabVIEW 8.2. I was also able to run the "old" program in LabVIEW 8.2 and read from that file in LabVIEW 8.2. Which version of LabVIEW was used to create the "old VI" ? Are you using the same "Read from LabVIEW measurements file" that worked in the "old" version? I think you just need to double check your read from LVM file settings to make sure they match the specifications of the write to LVM.
Cheers,
Spex
National Instruments
To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...

Labview 2011 executable does not run on AMD Quad Core

I have recently bought a brand new Toshiba Satellite with AMD Quad Core- A8-4500M 1.9GHz processor and Windows 7 OS. It does not run any labview executables. It runs on all my Intel machines without any problem. This is the first AMD ever bought (and the last). I need help in resolving this problem.
When I run an exe on the AMD, under Task Manager\Processes, I do see *.exe process running, but the Memory usage goes up and tops off at 100% and then it returns to 0. It's like a saw tooth waveform of memory usage, as if it's looking for some missing files. I have cleaned up the computer twice now and even a simple Add Two Numbers.exe does not work on this AMD.
Any clue, anyone? please?

I believe you are running into the problem described in this KB.
http://digital.ni.com/public.nsf/allkb/4734A6405B123FA58625799900813593
Regards,
Jon S.
National Instruments
LabVIEW R&D

Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB

Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,

yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB"   (usb device tree)
USB Bus:
Host Controller Location:          Built In USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0026
PCI Revision ID:          0x0000
PCI Vendor ID:          0x106b
Bus Number:          0x18
Hub in Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x1002
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version:          0.0e
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Imation
Product ID:          0x0002
Vendor ID:          0x0718
Hub in Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x1002
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version:          0.0e
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Imation
Product ID:          0x0002
Vendor ID:          0x0718
USB Bus:
Host Controller Location:          Built In USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0026
PCI Revision ID:          0x0000
PCI Vendor ID:          0x106b
Bus Number:          0x19
LaCie d2 DVDRW USB:
Capacity:          451.76 MB
Removable Media:          Yes
Detachable Drive:          Yes
BSD Name:          disk2
Version:          0.00
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          LaCie
OS9 Drivers:          No
Product ID:          0x1011
Serial Number:          FFFFFFFFFFFF
S.M.A.R.T. status:          Not Supported
Vendor ID:          0x059f
LaCie d2 DVDRW USB:
Capacity:          451.76 MB
Removable Media:          Yes
Detachable Drive:          Yes
BSD Name:          disk2
Version:          0.00
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          LaCie
OS9 Drivers:          No
Product ID:          0x1011
Serial Number:          FFFFFFFFFFFF
S.M.A.R.T. status:          Not Supported
Vendor ID:          0x059f

Mod_plsql: ORA-942 Execute(Temp BLOB) ORA-00942: table or view does not exi

mod_plsql: ORA-942 Execute(Temp BLOB) ORA-00942: table or view does not exist
This is the error I get in the Apache log. On the page:
"The requested URL /pls/apex/wwv_flow.accept was not found on this server."
I am sure this is just a configuration issue. I installed v1.6 with the http server off the companion cd with the db (10.2.0.1). After I had it working (did not test everything) I upgraded to 3.0.1.
I get this message when I am trying to import an application that I just exported! I am testing this for pushing code up to our production environment.
My dads.conf file looks like:
Alias /i/ /oracle/product/apps/htmldb/images/
AddType text/xml xbl
AddType text/x-components htc
<Location /pls/apex>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDatabasePassword xxxxxx
PlsqlDatabaseConnectString 192.168.2.195:1521:idpdev ServiceNameFormat
PlsqlDefaultPage apex
PlsqlDocumentTablename wwv_flow_file_object$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
</Location>
marvel.conf file is empty
There is a log file for pl/sql.... it has the following text in it that seemed pertinent: Attempting to logon with '(unknown)'
Also a log that says this and seems to have a "special character" in it that may be causing an issue:
<1133864024 ms>6565646261636b206f6e a70726f6d707420202e2e2e646f6e65 a
<1133864024 ms>-----------------------------2444716671664
<1133864024 ms>^M
<1133864024 ms>UploadBlobDoc: readahead 27 bytes into 82f5e5c
<1133864024 ms>UploadBlobDoc : Inserting piece OCI_NEXT_PIECE
<1133864024 ms>UploadBlobDoc:Attempt to write 2048 bytes(offset 249857)
<1133864024 ms>UploadBlobDoc:OCILobWrite for 2048 bytes (offset 249857)
<1133864024 ms>UploadBlobDoc: Read-Ahead buf 82f5e5c has 27 bytes
<1133864024 ms>UploadBlobDoc : Inserting piece OCI_LAST_PIECE
<1133864024 ms>UploadBlobDoc:Attempt to write 27 bytes(offset 251905)
<1133864024 ms>UploadBlobDoc:OCILobWrite finished for 27 bytes
<1133864024 ms>ORA-942 Execute(Temp BLOB) ORA-00942: table or view does not exist
<1133864024 ms>Stale Connection due to Oracle error 942
<1133864024 ms>/pls/apex/wwv_flow.accept HTTP-404 ORA-00942: table or view does not exist
<1133864024 ms>(wpu.c,594) longjumping back to the beginning
<1133864024 ms>(wpu.c,457) cleaning up before longjmp
<1133864024 ms>(wpu.c,461) doing a rollback
<1133864024 ms>(wpcs.c, 76) Executed 'rollback' (rc=0)
<1133864024 ms>(wpcs.c, 76) Executed 'begin dbms_session.reset_package; end;' (rc=0)
<1133864024 ms>(wpd.c,1816) Going to close cursor
<1133864024 ms>Freed BLOB
<1133864024 ms>DeinitCursor
<1133864024 ms>(wpx.c,690) Shutdown has been called
<1133864024 ms>(wpx.c,702) Going to logoff
<1133864024 ms>Logoff: Closing connection due to stale connection
<1133864034 ms>[ReqEndtime: 2/Oct/2007:15:38:11]
<1133864034 ms>[ReqExecTime: 80 ms]
I did go in and update the permissions to the wwv_flow_file_objects$ table to give PUBLIC full access to that table to see if that was the problem... it wasn't.
Probably information overload, but just wanted to be thorough. Anyone have any ideas?

I also have another issue... probably more of a clarification....
I run the following to stop the process:
"/oracle/product/apps/opmn/bin/opmnctl stopproc ias-component=HTTP_Server"
then
"/oracle/product/apps/opmn/bin/opmnctl startproc ias-component=HTTP_Server"
But, at that point, it says that opmn is not running.
So I try:
"/oracle/product/apps/opmn/bin/opmnctl stopall"
then
"/oracle/product/apps/opmn/bin/opmnctl start"
then
"/oracle/product/apps/opmn/bin/opmnctl startproc ias-component=HTTP_Server" and it still says that opmn is not running.
Once I start running the stops and starts, it will eventually start correctly.
I think that I am trying the steps too fast and that I probably need to wait a bit between steps since that seems to work better that way.

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?

When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?
== This happened ==
Every time Firefox opened

try
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

The home button for my ipod touch 4th generation does not respond all the time, What do I do?

The home button for my ipod touch 4th generation does not respond all the time, What do I do?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

it is a windows 8

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

HT5557 The ibooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

The iBooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

I went to the Audio store to see about getting a surround sound and the salesperson asked me why I wasn't using AirPlay, he said it was better than the Bluetooth, better quality. So I do have AirPlay on my Sony and I installed the app on my iPhone 5 but they can't find eachother.......when I try looking for my iPhone on my receiver it does not show it. The Sony display works through my TV, the set up screen is there but it says no devices found. Like I said, the Bluetooth finds the iPhone and works ok, but the AirPlay does not.....looking at the manuel it says that the AirPlay will recognize my device (iPhone 5) but it does not..........

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

Value Misc. Allowance for the flexfield segment Expense Type does not exist

Dear All,
can any budy help me out in Internet Expense modulee
Error:- Value Misc. Allowance for the flexfield segment Expense Type does not exist in the value set OIE_EXPENSE_TYPES.
Problem details:- we have define one expense templates " Relocation Expnse" under this we have define number of expense items ,in which Misc. Allowance is one
Prevously it was end dated but now end date is removed , now when we are trying to claim expense against this item we are getting the above error.
can you please tell me why this is happining and what is the solution.
Regard
Ajay Sharma

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

Right click the heading at the top of the message list and select From from the list of options.

I bought Ebey NEW Boxed (NEVER OPENED) 16GB Black Iphone 5 Virgin Mobile (USA) NO CONTRACT, want to use it in Europe, particularly in Ukraine, but for some reason now my phone does not see the Ukrainian GSM sim card.

I bought Ebey NEW Boxed (NEVER OPENED) 16GB Black Iphone 5 Virgin Mobile (USA) NO CONTRACT, want to use it in Europe, particularly in Ukraine, but for some reason now my phone does not see the Ukrainian GSM sim card. Please help to solve this problem.

Return it and get your money back. Virgin does not offer official unlocking, thus there's no way to get the phone officially unlocked for you to use it.
Sorry, but you wasted your money.

Executable built for PDA on Labview 7.1 does not run on PDA

Similar Messages

Maybe you are looking for