Executable Description Location - Help Needed
Good Afternoon,
I was wondering if someone knew of an article or location on the net where I could locate what the Executable Files in \oracle\product\10.2.0\db_1\bin do? I have a nice long list here of all of our current .exe files in that location but would like to know what each of them does. The reason I am requesting such information is we are about to dip into adjusting the stack memory on several of our executables and we would like to review each one before making any changes.
user10953246 wrote:
Good Afternoon,
I was wondering if someone knew of an article or location on the net where I could locate what the Executable Files in \oracle\product\10.2.0\db_1\bin do? I have a nice long list here of all of our current .exe files in that location but would like to know what each of them does. The reason I am requesting such information is we are about to dip into adjusting the stack memory on several of our executables and we would like to review each one before making any changes.Well, even by searching over Google, details of few executables would be given to you but the reason that you have mentioned for knowing this detail i.e. adjusting the stack memory for them, I would REALLY suggest that you include OSS while doing this as in normal conditions, adjusting the stack memory of executables from their defaults is not recommended. If OSS validates this act of yours than only you should go for it, not by yourself.
Just my 2 cents!
Aman....
Similar Messages
-
PSE 7 confusion about folder location, help needed
Here's some background: I'm using PhotoShop Elements 7 on Win XP. I have an external firewire hard drive I use for overflow/backups. Originally, this showed up as a K: drive on my system.
I added a RAID controller and two more drives to stripe as a single drive for temp space rendering movies. This ended up as a K: drive and the external moved to L: However, when I did this there were some pictures from my catalog that I had on the external drive. I have used File > reconnect missing files to handle the moves, but PSE is still confused (very).
PSE has started to mix up the RAID (K:) and external (L:) content. If I move a set of pictures (e.g. a folder of them) onto the external drive (L:) via drag and drop in the folder location view, the folder will show up empty on the L: heirarchy, but will show up as a gray folder icon in the K: RAID drive hierarchy. If I open up windows explorer, the RAID drive will appear empty. In other cases (I'm not sure when/how yet), pictures physically end up on the RAID drive itself instead of the external. I have uninstalled both the external drive and the RAID drive and reinstalled them both, but they are still getting confused in the folder view by PSE. I've also tried moving content outside of PSE and just reconnecting missing files, but it still wants to put things under the K: RAID drive instead of the external L:.
I've searched everywhere I can think of for a description of what gray folder icons in the folder location view means and can find none. I'm not sure how to convince PSE that there's nothing on the RAID K: drive and it shouldn't try to connect the two. Any suggestions?
Thanks,
JimThank you! I ran psedbtool and the output shows the catalog has the wrong drive letter for the L: drive.
Is there a way to make PSE forget about the K: and L: drives that it is so confused about so that it can relearn of their existence? If I use the drive letter reassignment to fix PSE, it will break other apps that are now dependent on the current drive letter assignments. I've tried removing all files from the L: drive, but it's still remembered as part of the catalog.
Thanks,
Jim
psedbtool version 1.07
Opening catalog C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\Catalogs\Moms pics\catalog.pse7db
Photoshop Elements version: 7
Total files : 4833
Total files missing : 0
Total files offline : 278
Total files wrong volume : 0
****** Volumes with warnings: 1
PSE Volume Table
Path used by PSE : F:
Type : builtin_drive
Status : online
Total files : 0
Total files missing : 0
Total files wrong volume: 0
Description : MEDIA
Serial : 1C2F-9805
Drive_path_if_builtin : F:
Id : 32520
Path used by PSE : M:
Type : builtin_drive
Status : online
Total files : 938
Total files missing : 0
Total files wrong volume: 0
Description : FreeAgent Drive
Serial : 7830-2970
Drive_path_if_builtin : M:
Id : 93626
Path used by PSE : E:
Type : builtin_drive
Status : online
Total files : 0
Total files missing : 0
Total files wrong volume: 0
Description : GAMES
Serial : 025A-4B70
Drive_path_if_builtin : E:
Id : 93625
Path used by PSE : L:
Type : builtin_drive
Status : online
Total files : 114
Total files missing : 0
Total files wrong volume: 0
Description : FreeAgent Drive
Serial : 60AE-A816
Drive_path_if_builtin : K:
Id : 31354
***** WARNING ***** : Wrong drive letter in catalog
Path used by PSE : \\dmzhost\media
Type : network_drive
Status : offline
Total files : 278
Total files missing : 0
Total files wrong volume: 0
Description : //dmzhost/media
Serial : //dmzhost/media
Drive_path_if_builtin :
Id : 26948
Path used by PSE : J:
Type : builtin_drive
Status : online
Total files : 3503
Total files missing : 0
Total files wrong volume: 0
Description : MEDIA2
Serial : BAC0-B5A3
Drive_path_if_builtin : J:
Id : 108
Path used by PSE : C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\Catalogs\Moms pics
Type : database_relative_drive
Status : online
Total files : 0
Total files missing : 0
Total files wrong volume: 0
Description : database relative
Serial : amoc:database_relative_volume
Drive_path_if_builtin :
Id : 2
Windows Drives
Drive Type Serial Path
A: removable_drive 0000-0000
C: builtin_drive 9088-07F9
D: builtin_drive F408-1CB0
E: builtin_drive 025A-4B70
F: builtin_drive 1C2F-9805
G: builtin_drive 242D-15ED
H: readonly_drive 0000-0000
I: builtin_drive 427D-3F6B
J: builtin_drive BAC0-B5A3
K: builtin_drive 64E8-9846
L: builtin_drive 60AE-A816
M: builtin_drive 7830-2970
Thanks so much for your help!
Jim -
Changing App Store Location - Help needed
Hi, I have just been to USA and the App Store changed to the US and now I am back I am unable to update or download apps on my ipad as it says I have to switch to UK store. I have tried the settings itunes and apps but I it states that it is UK store and to change i need to spend remaining £s from a gift card but unable to purchase anything as it is US store not UK, Any help will be appreciated.
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the region where you are located.
9. Tap "Done". -
Help needed in Finding Download location for Sun One Portal 7
Hi,
help needed for finding download location for Sun ONE Portal 7. I tried to find in Oracle Download page ,
http://www.oracle.com/us/sun/sun-products-map-075562.html, But unable to find.
Please share the link for download location.
I am totally new in Sun ONE Portal.
Thanks,
Edited by: 945439 on Oct 5, 2012 3:41 AMtry edelivery.oracle.com under sun products.
-
Report is executing in background and need data(output) in excel format
Report is executing in background and need data(output) to get downloaded in excel format in my PC from an internal table;;in any drive i.e. C: or D: .When executing in backround it prompt to user with which location excel file to be saved and the name of file.How to download in background in excel format?
Edited by: PRASHANT BHATNAGAR on Aug 26, 2008 6:24 AMHi
Download a report to excel with format (border, color cell, etc)
Try this program...it may help you to change the font ..etc.
Code:
REPORT ZSIRI NO STANDARD PAGE HEADING.
this report demonstrates how to send some ABAP data to an
EXCEL sheet using OLE automation.
INCLUDE OLE2INCL.
handles for OLE objects
DATA: H_EXCEL TYPE OLE2_OBJECT, " Excel object
H_MAPL TYPE OLE2_OBJECT, " list of workbooks
H_MAP TYPE OLE2_OBJECT, " workbook
H_ZL TYPE OLE2_OBJECT, " cell
H_F TYPE OLE2_OBJECT. " font
TABLES: SPFLI.
DATA H TYPE I.
table of flights
DATA: IT_SPFLI LIKE SPFLI OCCURS 10 WITH HEADER LINE.
*& Event START-OF-SELECTION
START-OF-SELECTION.
read flights
SELECT * FROM SPFLI INTO TABLE IT_SPFLI UP TO 10 ROWS.
display header
ULINE (61).
WRITE: / SY-VLINE NO-GAP,
(3) 'Flg'(001) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
(4) 'Nr'(002) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
(20) 'Von'(003) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
(20) 'Nach'(004) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
(8) 'Zeit'(005) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP.
ULINE /(61).
display flights
LOOP AT IT_SPFLI.
WRITE: / SY-VLINE NO-GAP,
IT_SPFLI-CARRID COLOR COL_KEY NO-GAP, SY-VLINE NO-GAP,
IT_SPFLI-CONNID COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
IT_SPFLI-CITYFROM COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
IT_SPFLI-CITYTO COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
IT_SPFLI-DEPTIME COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP.
ENDLOOP.
ULINE /(61).
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TEXT-007
EXCEPTIONS
OTHERS = 1.
start Excel
CREATE OBJECT H_EXCEL 'EXCEL.APPLICATION'.
PERFORM ERR_HDL.
SET PROPERTY OF H_EXCEL 'Visible' = 1.
CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:\kis_excel.xls'
PERFORM ERR_HDL.
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TEXT-008
EXCEPTIONS
OTHERS = 1.
get list of workbooks, initially empty
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
PERFORM ERR_HDL.
add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP.
PERFORM ERR_HDL.
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TEXT-009
EXCEPTIONS
OTHERS = 1.
output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
copy flights to active EXCEL sheet
H = SY-TABIX + 1.
PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
changes by Kishore - start
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
CALL METHOD OF H_EXCEL 'Worksheets' = H_MAPL." EXPORTING #1 = 2.
PERFORM ERR_HDL.
add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP EXPORTING #1 = 2.
PERFORM ERR_HDL.
tell user what is going on
SET PROPERTY OF H_MAP 'NAME' = 'COPY'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TEXT-009
EXCEPTIONS
OTHERS = 1.
output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
copy flights to active EXCEL sheet
H = SY-TABIX + 1.
PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
changes by Kishore - end
disconnect from Excel
CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'C:\SKV.XLS'.
FREE OBJECT H_EXCEL.
PERFORM ERR_HDL.
FORM FILL_CELL *
sets cell at coordinates i,j to value val boldtype bold *
FORM FILL_CELL USING I J BOLD VAL.
CALL METHOD OF H_EXCEL 'Cells' = H_ZL EXPORTING #1 = I #2 = J.
PERFORM ERR_HDL.
SET PROPERTY OF H_ZL 'Value' = VAL .
PERFORM ERR_HDL.
GET PROPERTY OF H_ZL 'Font' = H_F.
PERFORM ERR_HDL.
SET PROPERTY OF H_F 'Bold' = BOLD .
PERFORM ERR_HDL.
ENDFORM.
*& Form ERR_HDL
outputs OLE error if any *
--> p1 text
<-- p2 text
FORM ERR_HDL.
IF SY-SUBRC <> 0.
WRITE: / 'Fehler bei OLE-Automation:'(010), SY-SUBRC.
STOP.
ENDIF.
ENDFORM. " ERR_HDL
Regards
Murali Papana -
Help needed in configuring Dynamic F4
Hi All
I am trying to configure Dynamic F4 help for Actvities appln.
In Actvities Appln I have the Partners tab.In this Partner tab I have partner function and partner Id fields. When I make a search for partner Id I need to launch the search screen based on thepartner function selected.
I guess we can use dynamic F4 help but how to achieve this I am not sure. If anyone has done simliar stuff please do give your inputs.
Thanks
Regards
SenthilHi Senthil,
You can use Search Help Exit for your problem.
<b>Search help exit</b> : A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain time points in the input help process.
<b>Note:</b> The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
A search help exit is called repeatedly in connection with several
Events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
For more detailed information please refer to the documentation describing the concept of the search help exit.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
<b>Time Points</b> :
During the input help process, a number of time points are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these time points. If required, the search help exit can also influence the process and even determine that the process should be continued at a different time point.
The following time points are defined:
<b>1. SELONE</b>
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This time point can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next time point.
The time point is not accessed again if another elementary search help is to be selected during the dialog.
<b>2. PRESEL1</b>
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this time point in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
<b>3. PRESEL</b>
Before sending the dialog box for restricting values.
This time point is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
<b>4. SELECT</b>
Before selecting the values. If you do not want the default selection, you should copy this time point with a search help exit. DISP should be set as the next time point.
<b>5. DISP</b>
Before displaying the hit list. This time point is suitable for restricting the values to be displayed, e.g. depending on authorizations.
<b>6. RETURN</b> (usually as return value for the next time point)
The RETURN time point should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this time point if control of the process sequence of the Transaction should depend on the selected value (typical
example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
<b>7. RETTOP</b>
You only go to this time point if the input help is controlled by a collective search help. It directly follows the time point RETURN. The search help exit of the collective search help, however, is called at time point RETTOP.
<b>8. EXIT</b> (only for return as next time point)
The EXIT time point should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
<b>9. CREATE</b>
The CREATE time point is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. <b>APP1, APP2, APP3</b>
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these time points are introduced. They are accessed when the user presses the corresponding pushbutton.
<b>Note:</b> If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at time points SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other time points the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, time point RETTOP is not executed. The search help exit of the elementary search help is called at time point SELONE (at the moment). This search help exit should not do anything at this time point. Any preparatory work should be carried out at time point PRESEL1.
<b>Steps for creating search help :</b>
1. Run Transaction SE11
2. Give search help name
3. Click on Create
4. Make selection for Elementary or Collective search
Help
<b>For Elementary Search Help</b>
5. Elementary search Help screen.
6. Give short description.
7. Dialog type specifies the data display in the hit
list.
8. Give selection method
A] Search for database tables
B] Search for Views
9. Hot key specifies the letter or number displayed with every elementary search help.
10. Search help Exit: Specify the function module developed for the search of data for the elementary search help.
11. Search help parameter
A] Specify the input and output fields in the search help parameter column.
B] IMP column is input parameter for the search help.
C] EXP column is output parameter of the search help, to be displayed in the Hit list after selection.
D] LPos specifies the order in which fields are displayed in the hit list.
E] SPos specifies the order in which fields are displayed in the search help pop up screen.
F] Specify Data element in the field.
G] Specify the default value for any field required.
<b>For Collective Search Help :</b>
12. Search help exit: Specify the function module developed for the search of data for the elementary search help.
13. Search help parameter: Specify the import and export parameters.
14. Search help: Specify the elementary search help and the short text.
15. Parameter Assignment: Select the elementary search help and click on the parameter assignment. System proposes fields. User has to select the fields as per requirement, fields to be displayed in the output
hit list. Parameter assignment has to be done compulsorily for every elementary search help designed for the collective search help.
<b>Please reward points if it helps.</b>
Regards,
Amit Mishra -
Help needed in constructing a tree
Help needed in constructing a tree. I was wondering if some one can suggest me how to add messages in the second column for both the parent node and child elements.
I was able to create a tree succefully, but want to add some description in the second column for the first column elements, for both parent and child elements.
Please suggest me how to add the arrays to second column for parent and child nodes.
Solved!
Go to Solution.
Attachments:
Tree_fix.vi 15 KBThe Child Text parameter is the one you are searching for. It accepts a 1D string array for the following columns.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
Help needed to optimize the query
Help needed to optimize the query:
The requirement is to select the record with max eff_date from HIST_TBL and that max eff_date should be > = '01-Jan-2007'.
This is having high cost and taking around 15mins to execute.
Can anyone help to fine-tune this??
SELECT c.H_SEC,
c.S_PAID,
c.H_PAID,
table_c.EFF_DATE
FROM MTCH_TBL c
LEFT OUTER JOIN
(SELECT b.SEC_ALIAS,
b.EFF_DATE,
b.INSTANCE
FROM HIST_TBL b
WHERE b.EFF_DATE =
(SELECT MAX (b2.EFF_DATE)
FROM HIST_TBL b2
WHERE b.SEC_ALIAS = b2.SEC_ALIAS
AND b.INSTANCE =
b2.INSTANCE
AND b2.EFF_DATE >= '01-Jan-2007')
OR b.EFF_DATE IS NULL) table_c
ON table_c.SEC_ALIAS=c.H_SEC
AND table_c.INSTANCE = 100;To start with, I would avoid scanning HIST_TBL twice.
Try this
select c.h_sec
, c.s_paid
, c.h_paid
, table_c.eff_date
from mtch_tbl c
left
join (
select sec_alias
, eff_date
, instance
from (
select sec_alias
, eff_date
, instance
, max(eff_date) over(partition by sec_alias, instance) max_eff_date
from hist_tbl b
where eff_date >= to_date('01-jan-2007', 'dd-mon-yyyy')
or eff_date is null
where eff_date = max_eff_date
or eff_date is null
) table_c
on table_c.sec_alias = c.h_sec
and table_c.instance = 100; -
Help Needed - FusionFx Style - How do I remove the Dashboard Grey Box Section, so that Dashboard Background is Blank
We like FusionFx Style but would like to keep the background white like blafp style.Can you be a little more descriptive on what you need here and explain what exactly you want to be changed.
-
Help needed
1. When we use USING clause in execute immediate does it hard parse ?
2. Is it better to use values stored in SYS_CONTEXT or to use USING clause in Execute Immediate ?
3. In Dynamic SQL, if i use SYS_CONTEXT does it Hard Parse or Soft Parse ?
Edited by: Prathamesh on Jun 22, 2010 5:19 AMPrathamesh wrote:
1. When we use USING clause in execute immediate does it hard parse ?Only the first time.
2. Is it better to use values stored in SYS_CONTEXT or to use USING clause in Execute Immediate ?I think it depends, Tom would say the latter
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1669972300346534908
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1288401763279 -
help needed with itunes please tryed to move my itunes libary to my external hard drive itunes move ok and runs fin but i have none of my music or apps or anything all my stuff is in the itunes folder on my external hard drive but there is nothing on ituns how do i get it back help,please
(Make sure the Music (top left) library is selected before beginning this.)
If you have bad song links in your library, hilite them and hit the delete button. Then locate the folder(s) where your music is located and drag and drop into the large library window in iTunes ( where your tracks show up). This will force the tunes into iTunes. Before you start, check your preferences in iTunes specifically under the"Advanced" tab, general settings. I prefer that the 1st 2 boxes are unchecked. (Keep iTunes Music folder organized & Copy files to iTunes Music folder when adding to library). They are designed to let iTunes manage your library. I prefer to manage it myself. Suit yourself. If there is a way for iTunes to restore broken links other than locating one song at a time I haven't found it yet. (I wish Apple would fix this, as I have used that feature in other apps.) This is the way I do it and I have approx. 25,000 songs and podcasts and videos at present. Hope this helps. -
Help needed Displaying ALV Secondary list without using oops concept
Hi Experts
Help needed Displaying ALV Secondary list without using oops concept.
its urgent
regds
rajasekharhi chk this code
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*& Form validate
text
--> p1 text
<-- p2 text
FORM VALIDATE .
SELECT SINGLE VBELN
FROM VBAP
INTO V_VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM. " validate
*& Form get_details
text
--> p1 text
<-- p2 text
FORM GET_DETAILS .
SELECT VBELN
POSNR
MATNR
FROM VBAP
INTO TABLE IT_VBAP
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM. " get_details
*& Form fieldcat
text
--> p1 text
<-- p2 text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. " fieldcat
*& Form LAYOUT
text
--> p1 text
<-- p2 text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM. " LAYOUT
*& Form VARIANT
text
--> p1 text
<-- p2 text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM. " VARIANT
*& Form SAVE
text
--> p1 text
<-- p2 text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM. " SAVE
*& Form EVENTS
text
--> p1 text
<-- p2 text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM. "TOP_OF_PAGE
*& Form ALV_DISPLAY
text
--> p1 text
<-- p2 text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = PF_STATUS
I_CALLBACK_USER_COMMAND = USER_COMMAND
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = G_SAVE
IS_VARIANT = G_VARIANT
IT_EVENTS = G_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBAP
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " ALV_DISPLAY
*& Form SET_PF_STATUS
text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50651_PFSTATUS' EXCLUDING EXTAB.
ENDFORM. "SET_PF_STATUS
*& Form SET_USER_COMMAND
text
FORM SET_USER_COMMAND USING R_UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'DC'.
READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
IF SY-SUBRC = 0.
SELECT SINGLE MTART
FROM MARA
INTO V_MTART
WHERE MATNR = IT_VBAP-MATNR.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
ELSE.
WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
WRITE :/ 'MATERIAL TYPE :' , V_MTART.
ENDIF.
ENDIF.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'CLOSE'.
CALL TRANSACTION 'SE38'.
ENDCASE.
REPORT Z_ALV_INTERACTIVE MESSAGE-ID ZMSG_50651
LINE-SIZE 100
LINE-COUNT 60
NO STANDARD PAGE HEADING.
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*& Form validate
text
--> p1 text
<-- p2 text
FORM VALIDATE .
SELECT SINGLE VBELN
FROM VBAP
INTO V_VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM. " validate
*& Form get_details
text
--> p1 text
<-- p2 text
FORM GET_DETAILS .
SELECT VBELN
POSNR
MATNR
FROM VBAP
INTO TABLE IT_VBAP
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM. " get_details
*& Form fieldcat
text
--> p1 text
<-- p2 text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. " fieldcat
*& Form LAYOUT
text
--> p1 text
<-- p2 text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM. " LAYOUT
*& Form VARIANT
text
--> p1 text
<-- p2 text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM. " VARIANT
*& Form SAVE
text
--> p1 text
<-- p2 text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM. " SAVE
*& Form EVENTS
text
--> p1 text
<-- p2 text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM. "TOP_OF_PAGE
*& Form ALV_DISPLAY
text
--> p1 text
<-- p2 text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = PF_STATUS
I_CALLBACK_USER_COMMAND = USER_COMMAND
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = G_SAVE
IS_VARIANT = G_VARIANT
IT_EVENTS = G_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBAP
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " ALV_DISPLAY
*& Form SET_PF_STATUS
text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
ENDFORM. "SET_PF_STATUS
*& Form SET_USER_COMMAND
text
FORM SET_USER_COMMAND USING R_UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'DC'.
READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
IF SY-SUBRC = 0.
SELECT SINGLE MTART
FROM MARA
INTO V_MTART
WHERE MATNR = IT_VBAP-MATNR.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
ELSE.
WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
WRITE :/ 'MATERIAL TYPE :' , V_MTART.
SUBMIT SLIS_DUMMY WITH P_MATNR EQ IT_VBAP-MATNR
WITH P_MTART EQ V_MTART.
ENDIF.
ENDIF.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'CLOSE'.
CALL TRANSACTION 'SE38'.
ENDCASE.
plz reward if useful -
Help needed to run JSTL 1.1 in Tomcat 6.0.16
Hi All,Help needed to run JSTL 1.1 in Tomcat 6.0.16. I am trying to run the example given in http://tomcat.apache.org/tomcat-6.0-doc/jndi-datasource-examples-howto.html The example tries to connect to MySQL database from JSP using JSTL and JNDI Datasource.I am running the example using Eclipse 3.4.2 using Sysdeo plugin to start and stop Tomcat server from Eclipse IDE.
My web.xml file has <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
</web-app>
and test.jsp has proper taglib directives
<%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
I have placed the jstl.jar and standard.jarof the jakarta-taglibs-standard-1.1.2.zip under E:\Deepa\workspace\DBTest\WebContent\WEB-INF\lib directory also placedcontext.xml file under E:\Deepa\workspace\DBTest\WebContent\META-INF and the content of context.xml is as below
<Context path="/DBTest" docBase="DBTest"
debug="5" reloadable="true" crossContext="true">
<Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource"
maxActive="100" maxIdle="30" maxWait="10000"
username="deepa" password="mysql" driverClassName="com.mysql.jdbc.Driver"
url="jdbc:mysql://localhost:3306/javatest?autoReconnect=true"/>
</Context>
Now while running the example, Eclipse creates one DBTest.xml file under C:\Program Files\Apache Software Foundation\Tomcat 6.0\conf\Catalina\localhost
which has the following line:
<Context path="/DBTest" reloadable="true" docBase="E:\Deepa\workspace\DBTest" workDir="E:\Deepa\workspace\DBTest\work" />
I am getting the following error when running http://localhost/DBTest/WebContent/test.jsp
in Browser:
<HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: The absolute uri: http://java.sun.com/jsp/jstl/sql cannot be resolved in either web.xml or the jar files deployed with this application
org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:51)
org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:409)
org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:116)
org.apache.jasper.compiler.TagLibraryInfoImpl.generateTLDLocation(TagLibraryInfoImpl.java:315)
org.apache.jasper.compiler.TagLibraryInfoImpl.<init>(TagLibraryInfoImpl.java:148)
org.apache.jasper.compiler.Parser.parseTaglibDirective(Parser.java:431)
org.apache.jasper.compiler.Parser.parseDirective(Parser.java:494)
org.apache.jasper.compiler.Parser.parseElements(Parser.java:1444)
org.apache.jasper.compiler.Parser.parse(Parser.java:138)
org.apache.jasper.compiler.ParserController.doParse(ParserController.java:216)
org.apache.jasper.compiler.ParserController.parse(ParserController.java:103)
org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:154)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:315)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:295)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:282)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:586)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
In the Tomcat Server console, I am getting the following error:
INFO: Server startup in 7295 ms
May 20, 2009 6:36:48 AM org.apache.jasper.compiler.TldLocationsCache processWebDotXml
WARNING: Internal Error: File /WEB-INF/web.xml not found
May 20, 2009 6:36:48 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
org.apache.jasper.JasperException: The absolute uri: http://java.sun.com/jsp/jstl/sql cannot be resolved in either web.xml or the jar files deployed with this application
what is the problem with my code?
When running the same example, by creating a local server in Eclipse(creating new Server connection pointing to same Tomcat 6.0 installation) it runs fine without any error.Hi evnafets,
Wow, very helpful information, great insight into working of Eclipse. Thanks a lot.
I have one more question. I have a context.xml file under {color:#0000ff}E:\Deepa\workspace\DBTest\WebContent\META-INF{color} folder and that has the Resource element to connect to MySQL database:
{code{color:#000000}}{color}<Context path="/DBTest" docBase="DBTest" debug="5" reloadable="true" crossContext="true">
<Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource" maxActive="100" maxIdle="30" maxWait="10000" username="deepa" password="mysql" driverClassName="com.mysql.jdbc.Driver"
{color:#0000ff}url="jdbc:mysql://localhost:3306/javatest?autoReconnect=true"/>{color}
{color:#0000ff}</Context>{color}As usual when running application in local Tomcat server of Eclipse, this data source works fine. But when I run the application on Tomcat, by starting Sysdeo plugin from Eclipse, the DBTest.xml file created in C:\Tomcat 6.0\conf\Catalina\localhost has the context entry as<Context path="/DBTest" reloadable="true" docBase="E:\Deepa\workspace\DBTest\WebContent" workDir="E:\Deepa\workspace\DBTest\work">
</Context>The<Resource> element I have specified in the context.xml of \WebContent\META-INF folder is not taken into account by Tomcat and it gives the following error:May 21, 2009 5:20:04 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "org.apache.tomcat.dbcp.dbcp.SQLNestedException_: Cannot create JDBC driver of class '' for connect URL 'null'"
_at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(_QueryTagSupport.java:276_)
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(_QueryTagSupport.java:159_)
at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(_test_jsp.java:113_)
at org.apache.jsp.test_jsp._jspService(_test_jsp.java:66_)
at org.apache.jasper.runtime.HttpJspBase.service(_HttpJspBase.java:70_)
at javax.servlet.http.HttpServlet.service(_HttpServlet.java:717_)
at org.apache.jasper.servlet.JspServletWrapper.service(_JspServletWrapper.java:374_)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(_JspServlet.java:342_)
at org.apache.jasper.servlet.JspServlet.service(_JspServlet.java:267_)
at javax.servlet.http.HttpServlet.service(_HttpServlet.java:717_)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(_ApplicationFilterChain.java:290_)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(_ApplicationFilterChain.java:206_)
at org.apache.catalina.core.StandardWrapperValve.invoke(_StandardWrapperValve.java:233_)
at org.apache.catalina.core.StandardContextValve.invoke(_StandardContextValve.java:191_)
at org.apache.catalina.core.StandardHostValve.invoke(_StandardHostValve.java:128_)
at org.apache.catalina.valves.ErrorReportValve.invoke(_ErrorReportValve.java:102_)
at org.apache.catalina.core.StandardEngineValve.invoke(_StandardEngineValve.java:109_)
at org.apache.catalina.connector.CoyoteAdapter.service(_CoyoteAdapter.java:286_)
at org.apache.coyote.http11.Http11Processor.process(_Http11Processor.java:845_)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(_Http11Protocol.java:583_)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(_JIoEndpoint.java:447_)
at java.lang.Thread.run(_Thread.java:619_)
{code}
So to overcome this error I had to place the <Resource> element in DBTest.xml under C:\Tomcat 6.0\conf\Catalina\localhost {color:#000000}and then it works fine. {color}{color:#ff0000}*Why is the context.xml file in META-INF not considered by Tomcat server using Sysdeo Plugin?*
*Thanks,*
*Deepa*{color}
{color}
Edited by: Deepa76 on May 26, 2009 9:32 PM -
Help Needed in Creating Java Class and Java Stored Procedures
Hi,
Can anyone tell how can i create Java Class, Java Source and Java Resource in Oracle Database.
I have seen the Documents. But i couldn't able to understand it correctly.
I will be helpful when i get some Examples for creating a Java Class, Java Source and Stored Procedures with Java with details.
Is that possible to Create a Java class in the oracle Database itself ?.
Where are the files located for the existing Java Class ?..
Help Needed Please.
Thanks,
Murali.vHi Murali,
Heres a thread which discussed uploading java source file instead of runnable code on to the database, which might be helpful :
Configure deployment to a database to upload the java file instead of class
The files for the java class you created in JDev project is located in the myworks folder in jdev, eg, <jdev_home>\jdev\mywork\Application1\Project1\src\project1
Hope this helps,
Sunil.. -
1941W configuration help needed
Our Deployment Scenario:-
1941W Gigabit Ethernet 0/0 is connected to the PPOE connection of the ISP.
Gigabit Ethernet 0/1 is connected to the wired LAN
I have created 2 wireless radio Cisco_Kamran_BGN which is operating at 2.4 Ghz Devices and Cisco_Kamran_A which is operating at 5Ghz Devices.
I have created 2 VLans for the Wireless.
Vlan 10 for Cisco_Kamran_A 192.168.10.x
Vlan 11 for Cisco _Kamran_BGN 192.168.11.X
The problem is the Wireless users are not getting the IP address from the respective DHCP server which has been configured on the Router.
Can please any from the community help me and show me where I am missing the configuration.
Please find my router & ap configuration below.
Router Configuration
Router#
sh run
Building configuration...
Current configuration : 3022 bytes
! No configuration change since last restart
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable secret 5 $1$TdQt$npYeaf/W0kRElcfMggzJ31
no aaa new-model
service-module wlan-ap 0 bootimage autonomous
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.50
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp excluded-address 192.168.11.1 192.168.11.10
ip dhcp pool DHCP
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_A
network 192.168.11.0 255.255.255.0
default-router 192.168.11.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_BGN
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
dns-server 195.225.241.222 213.42.20.20
multilink bundle-name authenticated
crypto pki token default removal timeout 0
license udi pid CISCO1941W-E/K9 sn FCZ1553C1VK
hw-module ism 0
redundancy
bridge irb
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered GigabitEthernet0/0
arp timeout 0
no mop enabled
no mop sysid
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface Wlan-GigabitEthernet0/0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface Vlan1
no ip address
interface Vlan10
ip address 192.168.10.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Vlan11
ip address 192.168.11.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
ppp authentication pap callin
ppp pap sent-username xxxxxx password 0 xxxxxx
ppp ipcp route default
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list DSL_ACCESSLIST interface Dialer1 overload
ip access-list extended DSL_ACCESSLIST
permit ip 192.168.0.0 0.0.255.255 any
control-plane
line con 0
password xxxxxx
login
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
password xxxxxx
login
transport input all
scheduler allocate 20000 1000
end
Router#
Router#
Router#
Access Point Configuration
ap#
ap#
ap#
sh run
Building configuration...
Current configuration : 2603 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$JxdQ$a2/00bWJuhUKP9QLC94YD/
no aaa new-model
dot11 syslog
dot11 ssid Cisco_Kamran_A
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 1045081417161C5A555C7A7B
dot11 ssid Cisco_Kamran_BGN
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 020D05561907017015165949
username Cisco password 7 14341B180F0B
bridge irb
interface Dot11Radio0
description 802.11bgn radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
broadcast-key change 3600
ssid Cisco_Kamran_BGN
antenna gain 0
station-role root
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface Dot11Radio1
description 802.11a radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid Cisco_Kamran_A
antenna gain 0
no dfs band block
channel dfs
station-role root
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.10
description 802.11a bridge
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0.11
description 802.11bgn bridge
encapsulation dot1Q 11
no ip route-cache
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
no activation-character
line vty 0 4
login local
end
ap#
ap#
ap#Hi Stepehen,
Did the configuration as per your advice but i am getting the below mentioned error which i have highlighted it in red. Please advice what needs to be done.
Home
Re: 1941W configuration help needed
created by Stephen Rodriguez in Getting Started with Wireless - View the full discussion
conf t
interface Dot11Radio0
no ssid Cisco_Kamran_BGN
no encryption mode ciphers aes-ccm
exit
interface Dot11Radio1
no encryption mode ciphers aes-ccm
no ssid Cisco_Kamran_A
exit
dot11 ssid Cisco_Kamran_A
vlan 10
dot11 ssid Cisco_Kamran_BGN
vlan 11
exit
interface Dot11Radio0
encryption vlan 11 mode ciphers aes
ssid Cisco_Kamran_BGN
exit
interface dot11radio0.1
encapsulation dot1q 1 native
bridge-group 1
interface dot11radio 0.11
encapsulation dot1q 11
bridge-group 11
Configuration of subinterfaces and main interface
within the same bridge group is not permitted
exit
interface Dot11Radio1
encryption vlan 10 mode ciphers aes-ccm
ssid Cisco_Kamran_A
interface dot11radio1.1
encapsulation dot1q 1 native
bridge-group 1
interface dot11radio1.10
encapuslation dot1q 10
bridge-group 10
Configuration of subinterfaces and main interface
within the same bridge group is not permitted
end
wr
Reply to this message by going to Home
Start a new discussion in Getting Started with Wireless at Home
Maybe you are looking for
-
Card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej
card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej. Tried downloading this driver: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75456-1&cc=il&dlc=he&lc=he&... still dont work.
-
Time Machine for multiple macs - NAS or DAS attached to my iMac, which I then share?
Greetings I currently have three macs - MBA, MBP and an iMac (newest generation). I'd like to use Time Machine for all of them. Is it better to set up a NAS for Time Machine or can I use DAS that I woudl share (external HDD) attached to my iMac if th
-
Best way to MouseDrag multiple objects around a scene.
So I am having a little trouble trying to drag 3 Box's in a scene. Originally I had it set up where each was relocated to an x,y translated Z and set to a HWD. Then I figured I would, instead of the mouse click on the box itself, be in the root. From
-
HDMI cable with Mosh MiniDisplay port
Hello, I got a Mosh mini display and a HDMI cable, and even though the image works fine. There is no sound. I thought HDMI cable transmit sound. Do I need another cable? Is there a Mosh Mini display that plugs to both my sound and my Thunderbolt port
-
Navigating to the text item with color
hi all, i have 10 text_items in my form, i want that when i am in first text_item the color should change default to any color i want (take suppose yellow) then when i am going to second text_item then color should change to yellow like that it has t