Execute a transaction in EP

Hi,
I m new to EP.Soemone asked me like in SAP do we have transaction created in EP.
IF yes then how can we execute teh transaction.
Like in SAP we have SE91 where we creaet transaction adn execute those transactions similarly whetre can we create the transaction in EP and how do we execute them.
Thanks,
P007

Hi Avinash,
You can't Create Transaction in EP but EP Allows us to create Trnx Iview. All that you can do is you can make the R/3 transaction display in EP.
Proceed the foll steps..
Login as Content Admin or ur EP usrid shd have Content Admn Role.
Content Admin -> Portal Content -> Migrated Content - > EP ver -> Iviews ( Rgt clk the Iview ->create New Iview -> Choose Trnx iview -> give available R/3 transx. )
After creating Clik the Preview bt and see ur R/3 object.
Later u hav to assign this iview into Page -> Workset and this workset has to be put inside the ROLE.
Rgds,
Jothi.
DO Award pts if this is helpful.

Similar Messages

  • Error while executing the transaction QC22 (Quality Certificate for Batch)

    Hello Friends,
    While executing the transaction QC22(Quality Certificate for Batch), after giving the Batch Number and Customer Number, when i am executing it , system is throwing the error message as "Not all data was found for characteristic 90139982 in profile D80D8".
    Message no. ZQ010
    Diagnosis
    Not all data was found for characteristic 90139982, referenced as number 0030 in certificate profile D80D8. The missing data could be the short text, specifications, or results.
    System Response
    The missing charactertistic will not be printed on the certificate,
    Procedure
    Review the settings for data orgin of the short text, specifications, and results, and adjust accordingly.
    One more thing i would like to add here as against the same batch in april we had taken the print of COA (Quality Certificate) through the transaction QC22. But now we are trying to do that than system is thrown above mentioned error.
    As i am new in QM, kindly explain we were to maintain the certificate profile.
    Waiting for the experts inputs.
    Thanks and Regards,
    Jitendra Chauhan

    Hi
    Try with QA33 you may have display authorization,  or check in MB51 on the base of material and batch you can find the lot number generated, then go to QA03 and check the result, if you want to validate the characters check with the inspection plan, the characters entered in the inspection plan and the characters in the concerned certificate profile.
    Regards
    Naveen.
    Edited by: vaddapalli naveen on Jul 1, 2010 1:57 PM

  • Problem in executing FS10N transaction code -

    Hi All,
    I am executing FS10N transaction code, in selection criteria for company code, I have selected multiple selection tab. Here in ranges tab, I have entered " 01 to 32" Company codes range. Then I am receiving the following message "ONLY SELECT COMPANY CODES WITH SAME FISCAL YEAR".
    I am sure that all the selected comapny codes are having same fiscal year variant.
    Please advise me what is the problem and what should I do to rectify it.

    Hi chandra,
    This problem occur because you had been posted documents for some company code with another fiscal year variant and changed afterwards.
    Enter in OBY6: Utilities - Changed logs - Display status.
    You can display companies codes balances with same document posting period.

  • How to execute a transaction with a different user from the logged user?

    Hello Experts!
    I'm trying to find out a solution about this scenario: our users need to release a Purchase Order (ME28) and/or a Service Entry Sheet (ML85) in SAP from a WEB based application through TIBCO, but the requirement is to execute this operation with the same SAP User name of the user (with his authorization) and not with the TIBCO user that is logged to SAP.
    Is there someone that could suggest me a real time solution and how to develop it? I really appreciate your contribute and I'm at your disposal for any further information.
    Thank you very much!
    Alessandro

    Hi Rob!
    Thank you for your help, but I can't apply this solution, because we need to execute the transaction with a specific user name and not a generic user, besides our user have different authorization, for example the user Mr. Rossi can release only his Purchase Order but not the PO of another user Mr. Bianchi. Moreover we need to see the PO released/modified from a specif user name. So this is our constraint.
    Bye Ale.

  • Is it possible to execute a transaction by calling a irpt page?

    Hi,
    Is it possible to execute a transaction by calling a irpt page?
    If possible, is there a sample code (.irpt code) for MII 12.1?
    Thanks.

    You can use a SERVLET Tag in your irpt to execute an xacute query.
    Here is the help file from 11.5 but this works in all the versions.
    [http://help.sap.com/saphelp_xmii115/helpdata/en/Advanced_Topics/Report_Generation.htm|http://help.sap.com/saphelp_xmii115/helpdata/en/Advanced_Topics/Report_Generation.htm]

  • Need to track Function modules called when executing a transaction

    Hi All,
              Is there a way through which i can track function modules called, while executing a Transaction. Kindly provide pointers to it.
    Thanks in advance.
    Regards,
    Navin.

    Goto SE80 Transaction and use Program name for corresponding Transaction Use Find operation like Call Function .. then you will get list of FM ..
    There is no other option .
    reward Points if it is helpful
    Thanks
    Seshu

  • SYNTAX_ERROR when executing any transaction

    Hi All,
        I am getting the following error as soon as I log in. I am not able to execute any transaction. The dump occured while I was applying Stack 10. The performance assistant ask to generate/activate the interface SAPLSRABAX_EXC using menu painter but I cant even get to SE41.
    Any ideas.
    Thanks in advance,
    Shabnam
    Performance Assistant:
    Status LIVE of the user interface SAPLSRABAX_EXC missing
    Message no. 00264
    Diagnosis
    The specified GUI status either does not exist or was not generated.
    Procedure
    Use the Menu Painter to check whether the status required actually exists. If it does, then generate the interface SAPLSRABAX_EXC (using the Menu Painter).
    Runtime Errors         SYNTAX_ERROR
    Date and Time          07.04.2007 12:26:38
    Short text
         Syntax error in program "SAPLSEUF ".
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLSHI1" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
         The following syntax error occurred in program "SAPLSEUF " in include
          "CL_ENH_TOOL_FUGR==============CU " in
         line 133:
         "Method "IF_ENH_TOOL~COMPARE_WITH" is not declared or inherited in clas"
         "s "CL_ENH_TOOL_FUGR" - - - - - - - - - - -"
         The include has been created and last changed by:
         Created by: "SAP "
         Last changed by: "SAP "
    Error analysis
         The following syntax error was found in the program SAPLSEUF :
         "Method "IF_ENH_TOOL~COMPARE_WITH" is not declared or inherited in clas"
         "s "CL_ENH_TOOL_FUGR" - - - - - - - - - - -"
    Runtime Errors         SYNTAX_ERROR
    Date and Time          07.04.2007 12:26:38
    Trigger Location of Runtime Error
         Program                                 SAPLSHI1
         Include                                 LSHI1U19
         Row                                     23
         Module type                             (FUNCTION)
         Module Name                             STREE_RESET_INTERNAL_TABLES
    Source Code Extract
    Line  SourceCde
         1 FUNCTION STREE_RESET_INTERNAL_TABLES.
         2 *"----
         3 ""Lokale Schnittstelle:
         4 *"       IMPORTING
         5 *"             VALUE(STRUCTURE_ID) LIKE  TTREE-ID
         6 *"----
         7 *
         8   DATA: FUNCTION_MODULE LIKE TFDIR-FUNCNAME.
         9   DATA: ACTIVE LIKE RS38L-GLOBAL.
        10 *
        11   CALL FUNCTION 'STREE_GET_FUNCTION_MODULE'
        12        EXPORTING
        13             STRUCTURE_ID        = STRUCTURE_ID
        14 *         DATABASE_IDENTIFIER =
        15             ACTION              = 'IT'
        16        IMPORTING
        17             FUNCTION_MODULE     = FUNCTION_MODULE
        18 *         DATABASE_IDENTIFIER =
        19 *         MESSAGE             =
        20        EXCEPTIONS
        21             OTHERS              = 0.
       22 *
    >>>>>   CALL FUNCTION 'RS_FUNCTION_ACTIVE_CHECK'
       24        EXPORTING
       25             FUNCNAME  = FUNCTION_MODULE
       26        IMPORTING
       27             ACTIVE    = ACTIVE
       28        EXCEPTIONS
       29             NOT_FOUND = 1
       30             OTHERS    = 2.
       31   IF ACTIVE EQ FALSE.
       32     EXIT.
       33   ENDIF.
       34 *
       35   CALL FUNCTION FUNCTION_MODULE
       36        EXCEPTIONS
       37             OTHERS = 0.
       38 *  reset also table with header information. This is necessary since
       39 * the header is important for comparison with buffer data
       40   CLEAR EXISTING_STRUCTURES.  REFRESH EXISTING_STRUCTURES.
       41   CLEAR STRUCTURE_TADIR_DATA. REFRESH STRUCTURE_TADIR_DATA.
       42 * reset context resolution buffer

    Hi Shabnam,
    You are right .When a support pack is being imported in the system for performance reasons SPAM is set up so that by default no screens  or ABAP programs can be generated..This needs to be changed  if you want to work during an SP import.
    Choose EXTRAS in SPAM initial screen choose SETTINGS and choose IGNORE GENERATION ERRORS.
    It is better to avoid workign during a SP import on the system
    Check the link for more details
    http://help.sap.com/saphelp_nw04/helpdata/en/d7/56e89a884b11d2b422006094b9ea64/frameset.htm
    *Reward points  if the asnwer was helpful

  • JCO Call - Executing SAP Transactions

    I'm trying to execute one transaction - providing the necessary input i.e. Creating a Service Entry sheet.
    However, the return message indicated that it is erroneous - throwing the message "Service specifications in wrong structure".
    Does this imply that the import parameters (tables etc) are somewhat wrongly input?
    Anyone encountered this before?

    Hi
    calling BAPI_ENTRYSHEET_CREATE.
    passing in
    Importparameter = ENTRYSHEETHEADER
    TABLES = ENTRYSHEETACCOUNTASSIGNMENT, ENTRYSHEETSERVICES, ENTRYSHEETSRVACCASSVALUES.
    When I commented out ENTRYSHEETSERVICES and ENTRYSHEETSRVACCASSVALUES, I can create the service entry sheet. So I am suspecting it's either these 2 tables that are giving me the problem. Yet to know what - we wont need to populate most values in those 2 tables no?
    Thanks

  • JCO Call - Executing SAP Transaction

    I'm trying to execute one transaction - providing the necessary input i.e. Creating a Service Entry sheet.
    However, the return message indicated that it is erroneous - throwing the message "Service specifications in wrong structure".
    Does this imply that the import parameters (tables etc) are somewhat wrongly input?
    Anyone encountered this before?

    Hi
    calling BAPI_ENTRYSHEET_CREATE.
    passing in
    Importparameter = ENTRYSHEETHEADER
    TABLES = ENTRYSHEETACCOUNTASSIGNMENT, ENTRYSHEETSERVICES, ENTRYSHEETSRVACCASSVALUES.
    When I commented out ENTRYSHEETSERVICES and ENTRYSHEETSRVACCASSVALUES, I can create the service entry sheet. So I am suspecting it's either these 2 tables that are giving me the problem. Yet to know what - we wont need to populate most values in those 2 tables no?
    Thanks

  • Remove the logging in & logging off screen executing a transactional iview

    I created transactional iviews for few transactions
    It link to the SAP GUI where it first moves to SAP logon first,then goes to the transasction execute it and when try to close the SAP screen it prompts logging of dialog box .to save data or not
    I want to remove both logging in screen and logging off dialog prompt while executing the transaction
    Kindly give your suggestion .I worked on work protect mode too but its not resolving the problem

    Hello,
    Assuming that you are using SAP GUI for HTML, I dont think there is any way to not get the SAP GUI loading screen. I just had a look at our transaction iViews and I dont get any log off prompt and login prompt either. Have you setup SSO between your portal and the backend systems?
    Regards,
    Gopal.

  • How to execute ME22N transaction in background.

    Hi experts,
    How to execute ME22N and ME23N in background, when execute the transaction in background, , it should generate a spool, with out any printpreview. How can we do this....?
    thanks

    Hi,
    Write a BDC program for updation of tables for u r user-exit.
    After that Schedule u r program in back gound job scheduling.
    Using  SM36 - Define Background job.
    Give the job name and Press job wizard button.
    It's asking about job name and job class -prioritty.
    press continue and give program name .
    Select radiobutton based on u r requirement.
    Then specify periodic job or only in holidays.
    Then u select hours and all.
    In SM37 give u r job name and and press execute.
    Reward if useful.
    Regards,
    Narasimha

  • Error when executing the transaction SXMB_IFR (PI 7.00)

    Hello All,
    When I am executing the transaction SXMB_IFR I am getting the following message in the bottom.
    The message is "Enterprise Services Builder address not maintained" and nothing is opened, I mean I am in the initial screen only.
    And when I tried to check ditectly using URL "http://<hostname>:<port>/rwb/index.jsp" and tried to click on " Component Monitoring " it is giving the error  "java.lang.NullPointerException" .
    And when I tried to click on "Performance Monitoring" it is giving the error as follows
    "5 Message(s) :  SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: No System Landscape Directory registered - Attempt to create JCo connection object failed for domain null - Integration Server unable to specify a JCo client - No component names available from Integration Server - "
    Can any body tell me how to correct this error.
    Thanks,
    Sekhar.

    Hi Sekhar,
    Have you tried SLDCHECK
    All the service User/Password are maintained in exchange
    profile(not advisable to change though)
    http://<hostname>:5<sys_number>00/exchangeProfile
    If ur changing it u might need restart of Web AS.
    Run transaction SLDCHECK and see if ur getting any errors.
    also check this link for sldcheck
    http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
    Connection to SLD does not work
    Connection to SLD does not work
    /thread/202496 [original link is broken]
    Please go through the following link:
    Problem with SLD connection
    Problem with SLD connection
    Also,
    http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/content.htm
    Step 41 "configuring system landscape directory" runs forever during instal
    It was solved with OSS note 764176.
    Please read OSS note carefully.
    connection to SLD failed
    Reward points if this helps
    Regards
    Pragathi.

  • How to execute the transaction SCI

    Hi All,
    How to execute the transaction SCI
    Thank you,
    Sridhar.

    Hai ,
    there are two ways to use SCI , one is you open you code in se38 -->display mode --> Program >check>code inspector. here your program is executed with a dafault variant provided in SCI.
    Second method is go to SCI , create a inspection  an choose a variant , here system provide you with a wide range of program checks (security/syntax etc)
    For any further help.
    Do reply.
    Regards
    Jase

  • EXIT_SAPLV01Z_003 not executed and transaction MIGO display error

    Hi,
    I activated user exit EXIT_SAPLV01Z_003 and it is never executed on transaction MIGO. Also this transaction display an error message "ENTER BATCH".
    Movement type 101 is set as manual and check in user exit.
    <<some promises removed by moderator>>
    Thanks
    Edited by: kishan P on Oct 15, 2010 12:28 PM

    Hi,
    Check SAP Note 412562.
    Sujay

  • How to execute a transaction code in prod.Server from development server

    Hi Friends,
    How to execute a transaction code in prod.Server from development server,Pls give me your valuable suggestions...
    Regards,
    V.Balaji

    i have  a program in production system if i type the request and execute its sends a mail to my admin saying to transport the request to production system.....thats y??????
    just tell me ur idea.............

Maybe you are looking for

  • Downloaded files are not shown in the folder indicated in Options

    "Options" shows that downloaded files should be in a a particular folder. I go to that folder via Windows Explorer and they're not there...other files are, however. So -- how can I access the downloaded files via Windows Explorer if they're not being

  • How do you update playlists on your iPod with the new iTunes?

    With the new iTunes, I can't seem to be able to update playlists on my iPhone device when plugging it in. I can add songs to the playlist and can add songs to my device. However after adding songs to a playlist, I can not update that playlist on my d

  • How to use the cinema display while your Macbook is closed

    How do I use the cinema display while my Macbook is closed? Whenever I close the laptop the display shuts off as well. I really don't need them both to be on. That defeats the purpose of the external display. when I am home I want to use the laptop l

  • How do I get documents from mac to iPad

    How do I get documents from Mac to iPad?

  • Load balancing with NAT

    Hello, If all the clients are behind an ISP and as a result coming in with a single NAT address is it still possible to attain load balancing across multiple servers using "predictor hash address dest 255.255.255.255"? Thanks, Murtaza