Execute a WSDL file generated through SAP R/3

Hi all,
I want to know how to execute a WSDL file generated after running web service wizard for a RFC in SAP R/3 system?
This WSDL file contains XML schema with input and output parameters with RFC name.
Is there any way that i can execute that WSDL file directly or do i need to use some tool for that?
For ur refrence to create web service, u go to se37, choose any RFC name, display that and then go to utilities-> more utillities-> create web service.
SAP system should be ECC5.0 version.

WSDL - is just the definition of the webservice.
Using this you need to create a client proxy to consume the webservice.
client proxy can be generated either using NWDS or using ABAP
check out this weblog
Consuming .NET Webservice in EP5.0
its for consuming .net webervice in EP5 but should give you a pointer on how to go about it.
Regards
Raja

Similar Messages

Excel file generated through SAP not opening on Smartphone

Hi,
My program sends an email with excel attachment (Used FM : SO_DOCUMENT_SEND_API1).
Receiving person able to open and view the Excel file attachments on Laptops / Desktops.
But on Smartphone, it gives error 'Can't Open - Excel doesn't recognize the file format'.
Please help on above problem.
Thanks,
Shailesh

Hi All,
Your expertise needed to overcome issue of opening excel file generated and send as attachment on smartphone.
Tried program 'BCS_EXAMPLE_7' (Sending and Excel attachment) - but Excel file not opened on smartphone. (Giving error Can't Open Excel doesn't recognize the file format 'ExcelfileName')
If we open excel file on desktop / laptop there is no problem for opening the file.
Thanks in advance,
Shailesh

Format of CSV file generated through iBot

What is the default format of csv file generated through iBot (UNICODE / UTF) ?
How can we configure a single iBot to generate CSVs, for example, in UTF format instead of UNICODE (assuming UNICODE is default).
-Jimit

Use this
https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=324436281886916&type=DOCUMENT&id=1459947.1&displayIndex=1&_afrWindowMode=0&_adf.ctrl-state=130oxyc5cv_71
Content:
Goal
Currently the CSV format in Agents always delivers the report results in tab delimited CSV. Is there a setting that can make the report result in a comma delimited CSV format when the reports are setup via Agents/iBots?
Fix
There is no setting that would make CSV output from an iBot be comma delimited as opposed to the tab delimited output from the web UI.
There is an enhancement request for this functionality. for more information, see bug 13802667 - COMMA DELIMITED CSV FORMAT FOR AGENTS/IBOTS has been logged to include this feature in future release.
As a work-around, you can to run a custom script from an Agent to convert tabs to commas. See chapter 4 (http://docs.oracle.com/cd/E21764_01/doc.1111/e18562/schedjobscripts.htm#BABGFBBD) of Oracle® Fusion Middleware Scheduling Jobs Guide for Oracle Business Intelligence Enterprise Edition 11g Release 1 (11.1.1) Part Number E18562-01 for more information on writing custom scripts.
If helps pls mark

Problem with WSDL file generated by PI for sender SOAP

I have a scenario SOAP to idoc that I am trying to test in PI7.1. I have created my objects in the ESR and completed the configuration in IB. When I test the configuration in IB, the data passes through PI to ECC correctly.
Now I want to export the WSDL file from the Sender Service Interface being used for this scenario and test it using SOAPUI. However, when I look at the WSDL file proposed by PI, there is no SOAP URL proposed in the WSDL. My understanding from looking at other threads in the the forum is that the URL should be proposed in the WSDL file, and I can then export this WSDL file to my PC, and upload it into SOAPUI for testing.
Why is the URL not being proposed in my WSDL file?
Thanks in advance for any help.
Terri

Thanks Baskar that solved part of the problem.
When I use this newly generated WSDL file for testing in SOAPUI, I now get an error 401, which I believe has something to do with needing a user id and password. However, my scenario is not setup to require a userid or password. Any other help would be appreciated.
Below is the actual results from SOAPUI:
HTTP/1.1 401 Unauthorized
server: SAP NetWeaver Application Server 7.11 / AS Java 7.11
www-authenticate: Basic realm="XISOAPApps"
connection: close
pragma: no-cache
content-type: text/html;charset=ISO-8859-1
content-encoding: gzip
date: Thu, 03 Mar 2011 22:49:56 GMT
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
 <title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link
A:visited
A:active
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
 <td align="left" colspan="2" height="48"> 401 &nbsp Unauthorized</td>
</tr>
<tr bgcolor="#3F73A3">
 <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
 <td height="23"><img width=1 height=1 border=0 alt=""></td>
 <td align="right" height="23">SAP NetWeaver Application Server 7.11 / AS Java 7.11 </td>
</tr>
<tr bgcolor="#9DCDFD">
 <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
 
 Error: Unauthorized Troubleshooting Guide <a href="https://sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home">https://sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home</a>
<table><tr><td valign="top"> Details:</td><td valign="top"><PRE>No details available</PRE></td></tr></table>
</body>
</html>

How to make a WSDL file generate Java Code

Hi, I'm quite new in web services. I used the ebay shopping service importing the WSDL file with wsimport, and NetBeans automagically created the Ebay libraries while parsing the WSDL.
Now I'm trying to implement my own soap WS, i'm quite finished but when I try to use it importing the WSDL in a new project, my classes are not imported.
So, where's the trick? How can I include code generationi n my WSDL?
thanks in advance :)

hi,
since the wsdl parsing was complet, for sure the classes are copied (.java), to see them check the following path
YourService\build\generated\wsimport\client\YourService
and the .class file will be in
YourService\build\generated\wsimport\binaries\YourService

Incomplete WSDL file generated

Hi,
I am testing synchronous processes deployed to BPEL PM 10.1.2.0.2 running on Linux. There are 20 processes deployed, and randomly I encounter the following problem: when testing a process (may be any one), the caller encounters a WSDL validation error with the sync process.
When calling from another BPEL process, the error goes along the lines of: Cannot find binding operation definition based on wsaAction='null', and soapAction='process' in .......wsdl. When testing from Soap UI, an error message states there is nothing to import. However, the process can still be invoked from the BPEL test console.
When I check the WSDL file of the process on the server it is incomplete, missing the <binding> and <service> tags and their contents. To solve the problem, I redeploy the process from JDeveloper (without modifying it), and the WSDL file is then generated normally and I can once again invoke the process.
Any ideas how to resolve this?
Thanks,
Nicholas

I have an urgent need for a Sr, Oracle BPEL Developer in the Dallas Texas area. With this position, you can interview and start immediately. If you are interested or know of anyone looking please send my way.
Warm regards,
Kim Dobson
Sr. Account Manager
Eventus Group Technology Resources
10100 N. Central Expressway
Suite 150
Dallas, TX 75231
Office 469.916.4857
Mobile 214.277.2097
Fax 469.916.3861
[email protected]

Issue while uploading DME file generated from SAP using program RFFOAU_T

Hi Friends,
I ran f110 for our australian company code and able to generate DME file for making supplier payments successfully.
Encountered problem while uploading this file into our Bank Portal, upload is unsuccessful, status is showing as "Requires Repair u201C
I called the bank customer service and they told me that ,
We need to enter in our SAP the Bank ID ,
We have to enter there : NAB
Customer service told me that their bank is looking for Bank ID ,
But canu2019t see it , so the payment is not going through.
Can you please help me that where in SAP Bank ID should be entered, so as to upload this file successfully.
Thanks for your help.
Regards
Anil

Hi Anil,
While creating House Banks you can find Button called Data Medium Exchange. There is Bank Id field.
Try it once
reg
vishnu

Reading XML file generated through XMLGEN

Hi,
I have the following problem and I hope someone can give me an advise.
I generated a simple XML document through the packages XMLGEN.
This document is stored in a table in CLOB column.
After this document has been processed (changed) from the web server's ASP pages, I want to read this (changed) XML document (again in the a table in a CLOB)
to compare it against relational data.
There is not external DTD or schema of this XML.
I was thinking to read the elements from the XML/CLOB one-by-one and process them as needed.
I'm reading already over one week the Oracle manuals, but I can't find any good samples that would help me.
Does anyone know a nice PL/SQL sample to solve this problem?
Here is a sample of the XML data:
>>>>>>>>>
?xml version="1.0"?>
<Subscriber-Detail>
<Subscriber>
<Member-ID>0250149556</Member-ID>
<DIVISION-ID>003</DIVISION-ID>
<UNIT-ID>004</UNIT-ID>
<Last-Name>PUBLIC</Last-Name>
<First-Name>JOE</First-Name>
<Birthday_DT>29/06/1961</Birthday_DT>
<Address>2200 PEATON PLACE</Address>
<City>WOLVERHAMPTON</City>
<Salary>71500.00</Salary>
<Smoker_YN>Y</Smoker_YN>
</Subscriber>
</Subscriber-Detail>
<<<<<<<
Environment: Oracle 9i R2 - no JAVA, pure PL/SQL
Any help much appreciated.
TIA
Thanks
Fred

Will these help ?
How to use PL/SQL to read and manipulate data from a xml file
How to Read XML tags....

PDF file generated through PDFWriter does not open

i generate a pdf file using itext "itext-1.4.6.jar". this file opens in Acrobat reader 5,6,7. But i can not open it in Acrobat Reader 8.
Plz tell me if there is some special reason associated with itext or Acrobat Reader.

1) This is not an iText support board.
2) What's the error message?

Password Protection of PDF file generated thru SAP

Hi,
I have written a program to send payslip through email . This mail sends the payslip as a PDF attachment.
I want to password protect that PDF document, so that it asks for a password before being opened by the employee.
Your suggestions will be highly appreciated.
Sanchit

Hi sanchit,
1. The payslip passes thru SCOT
   settings,
   which in turn generates the PDF
   and sends mail.
2. SCOT does not provide any such facility,
   for password protection.
3. I don't think the password
   concept can be done in a normal fashion !
regards,
amit m.

Problem with opening of PDF file, generated through smartform

Recently, I have developed a new program where, the output of smartform will generate a PDF file, and then that PDF file will be mailed to concern persons,
I have sucessuly done this in development server, and further testing I have transported this to Quality, in Quality i am able to generated a pdf file and able to send it to mail box of concern person, but when concern person tries to open the PDF file, it gives the error stating 'There was an error in opening the document, The file is damaged and could not be repaired'
But same, I can able to read from development server.
When I asked the Basis person, they are not aware about it, and , I have make it sure that, I have transported all request to Quality and nothing is pending in development.
Can you please give me some idea to sort out this issue.
Thanks in advance
Rani

Hi,
I have same requirement.
I need to cnvert smartform->pdf->send mail.
The mail is send but the attachment is corrupted.
Can you tell me what code you have written so its working in developement?

ODI not picking the file generated through calcscript

Hi John,
We have used samba and mapped the folder from linux to windows.We named the drive and specified the path.
Now i ran the interface which invokes the calcscript for data extraction and the script ran well.I t generated the file. But the file is not being picked by ODI.
I got the following error
Error occured while reading the data file produced by calculation script.
Caused by: java.io.FileNotFoundException: Y:\Data_Opex.csv (The system cannot find the path specified)
Please suggest

Sravan Ganti wrote:
Hi John,
Its a network drive.I named it as Y: and trying to access it. If its not possible please suggest an other alternative. The client wants the dataload from essbase to be automated.and it is stopping a huge deliverable for us.Why can't you share another drive on the windows machine? If ODI can't see the Y drive then you will have to put it on another drive.
Cheers
John
http://john-goodwin.blogspot.com/

Reading a PDF file generated through a R/3 program

is it possible ? From a portal application(PDK/WebDynpro..both in java language), could i call a RFC which generates and transfers a PDF file ?
any suggestion will be welcome!
tks!
André

Luis,
Yes, you can do that. The RFC should generate the output in the form of bytes[].
A pointer code for doing that will look like this:
wdThis.wdGetFile_PdfCustController().getFile();
* The previous line of code gets the output from the
* suitable model attribute which contains the output
* returned by RFC.
byte[] pdfContent= wdContext.currentOutput_PrintElement().getFile();
try
    IWDCachedWebResource pdfResource=
           WDWebResource.getWebResource(pdfContent,WDWebResourceType.RTF);
    IWDWindow newWindow= wdComponentAPI.getWindowManager
           ().createExternalWindow(pdfResource.getURL
           (), "ResultView", true);
    newWindow.open();
catch (Exception ex)
    wdComponentAPI.getMessageManager().reportException
           (ex.getMessage());
Bala
Message was edited by: Bala Krishnan

Cannot generate WSDL files With B1WS Wsdl Services Generator

Hello
I am trying to use the WSDL service generate for SAP web services and its causing me a bit of grief.
Whenever I run it crashes and dies I assume it is because I putting the wrong information in the fields. I have performed all the actions in the help file but I don't seem to be able to find anything anywhere that gives me the exact details of what should go in the text boxes in the generator :
Server -- I assume itu2019s the windows computer name (i.e. TEST)
DbSever type -- No worries itu2019s a drop down even I can figure that out
License Sever -- I assume itu2019s the License server as shown settings :3000 (i.e. TEST:30000)
User Name -- I assume itu2019s the SQL username
Password -- I assume itu2019s the SQL password
Hopefully I have something really simple really wrong.
Thanks in advance for any help.
Darren

This forum is for Crystal Reports. Post your question to the B1 forum.

How to use wscompile to generate code using a WSDL file?

I am working with JAX-RPC of Java Web Service ver: 1.1. I am intrested in making the WSDL file first and generating Java code from the WSDL file. On the following link:
http://java.sun.com/webservices/docs/1.1/tutorial/doc/JAXRPC6.html#wp80094
it says that wscompile can generate code using a WSDL file..:
<quote>
Table 11-3 wscompile Options
-import : read a WSDL file, generate the service's RMI interface and a template of the class that implements the interface
</quote>
and the wscompile software says this:
<quote>
C:\>wscompile
-import : generate interfaces and value types only
</quote>
can anyone tell me how to generated Java code from a WSDL file. As in, make the WSDL file (e.g. using XMLSpy) and then use that WSDL generate Java code.
Thanks

I'm trying to generate code using wscompile under the struction in JAXRPC_Tutorial.pdf.
I issued the following command:
wscompile.sh -keep -gen:client -f:wsi -verbose config.xml
But I met with the following warning and I cann't find the produced java code, who know why? Thanks in advance!
warning: ignoring SOAP port "EmployeeDBPort": unrecognized transport
warning: Service "EmployeeDatabase" does not contain any usable ports
the config.xml file is:
<?xml version="1.0" encoding="UTF-8"?>
<configuration
xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<wsdl name="EmployeeDBService"
location="EmployeeDB.wsdl"
packageName="com.sun.xml.rpc.xml.EmployeeDB">
</wsdl>
</configuration>

Execute a WSDL file generated through SAP R/3

Similar Messages

Maybe you are looking for