Execute button for BEx Analyzer in the Query Designer

Hello,
My current BEx Query Designer 7.1 and we are using Excel 2003. Currently, I can execute query through BEx Web but I am also looking for green check button of BEx Analyzer also. Could you please tell me how can I incorporate/add this BEx Analyzer check box in Query Designer so that I can execute query both in BEx Web as well as BEx Analyzer.
Thanks very much in advance.
Regards,
Md

Hello Hyma/Prasanna,
Thanks for your reply and it's solved my problem.
If I logon BEx Analyzer and open or changed query through it, I can see green check box in Query Designer. Now I can run query both in BEx Analyzer as well as BEx Web.
Regards,
Md

Similar Messages

Curerency conversion for a Formula in the query designer

Hi
I have a ' Financial Loss Formula' in the report. I want to convert this 'Financial Loss' into USD Currency at query designer level.
Source Currency = SAR
Target Currency = USD
So how can i do the curerency conversion for a Formula in the query designer.
pls let me kow
kumar

Hi,
If you define your query conversion in BW then it is easy to do currency conversion through Bex.What you need to do is use calculated key figure instead formula and do a right click select properties there at the currency translation area you ca select defined currency conversion in BW and your target currency.
/people/rasim.manavoglu/blog/2007/04/30/currency-currency-currency
Regards.

Do we can set any scroll option in the query designer?

Hi,
I would like to know is there any setting for scroll option at the query designer level.
This is because if I look at some reports so I could see little ups and down (small up and down arrows) symbol at the column level, and is enabled for only few reports.
Need some input on the same.
Thanks

Hi
I think you are right clicking on KeyFigures Heading, instaed of that can you on any Keyfigure (example KF1 and KF2 etc..). once you done that you will see the following options.
EDIT
COPY CTRL + C
CUT CTRL + X
PASTE CTRL + V
DELETE DEL
WHERE USED LIST
LEVEL DOWN CTRL+ >
LEVEL UP CTRL + <
PROPERTIES ALT + ENTER
please select the highlighted options on the required key figures, then execute the query.
regards
Pavan

Error in Bex Analyzer including the filter button command in Callback macro

Hello,
I have the following problem with the function filter button in the Bex Analyzer included in the callback macro:
Because of using 2 hierarchies in the filter the setting drill down to level 2 in the query gives no right output in the Bex Analyzer. The drill down level 2 is not shown. SAP recommends the include of a filter button to solve this problem. With a filter button in the sheet the problem was solved.
But after including the filter button command in the callback macro I get an error in MS Excel.
The callback macro starts, the filter was set by the user and the data was refreshed. Because of the refreshing of the filter the callback function the callback function starts several times. After setting the filter the first time, the following macro avoids the several starting of the set filter function:
Sub CallBack(ParamArray varname())
On Error GoTo err_handler
 Dim lRange As Range
 Set lRange = varname(1)
'Filter entfernend/delete filter
Dim ZeichenFilter As Long
ZeichenFilter = Len(Sheet4.Cells(41, 3).Value)
Dim Filter1 As String, Filter2 As String
Filter1 = Left(Sheet4.Cells(28, 3), ZeichenFilter)
Filter2 = Left(Sheet4.Cells(41, 3).Value, ZeichenFilter)
If Filter1 <> Filter2 And Filter2 <> "" Then
 onAction = True
 onAction = False
End If
'Filter setzen mit einmaligem durchlaufen/set filter and run one time
If onAction = False Then
 onAction = True
 Call Sheet4.BUTTON_55_Click
 onAction = False
End If
exit_handler:
 Exit Sub
err_handler:
 MsgBox Err.Description, vbOKOnly, "Error in " & " setMusterSub"
 Resume exit_handler
End Sub
After the filter was set the callback macro starts the second time. Then the Bex Analyzer erros with the sandglass. The working on VBA is possible, but not the working with Bex Analyer . Values in Excel werent shown.
How can I avoid this error?

Once I am adding VAR_VALUE_1 to the static parameters, the system generates two messages error:
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program SAPLRRS2 and form GET_SID-1
Best Regards,
Hanit

BEx Analyzer cannot open query, button is in German

Hi Gurus,
I am using MS Excel 2003 and have installed all windows updates. I even have successfully installed the patch KB907417 from Microsoft, but still I cannot open queries using BEx Analyzer. The BEx icons display German labels instead.
How should I fix this?
Please recommend links for SAP GUI and BEx updates and patches.
Thank you very much!
Regards,
Btup

Hi Btup,
First just try to install Install Microsoft Excel patches version of Excel is: Excel 2003 (11.8169.8172) SP3 and see how it goes.
If it doesn't work then try following steps:
Install SAPGUI 710 to Level 4
Install bw350gui710_1-10004473.exe to install patch BI 3.x to Level 1.
Install bw350gui710_2-10004473.exe to install patch BI 3.x to Level 2.
Install bi710_2-10004472.exe to install patch BI 710 to Level 2.
Install bi710sp02p_201-10004472.exe to install patch BI 710 to SP2.
Install bi710sp03_300-10004472.exe to install patch BI 710 to SP3.
Install bi710sp04_400-10004472.exe to install patch BI 710 to SP4.
Install Microsoft Excel patches version of Excel is: Excel 2003 (11.8169.8172) SP3
Regards,
Shalin Shah

BEx Analyzer: Exchange characteristics with design item "Button"

Hello everyone,
I am creating a workbook with the BEx Analyzer. The user should be able to exchange one characteristic with another one by a button click (e.g. replace the drilldown of characteristic product group by a drilldown of customers).
I inserted a button in the design mode and edited it with the command wizard.
In the area for the static parameters I inserted the following:
Name/Index/Value
DATA_PROVIDER/1/DP_1
CMD/1/EXCHANGE
IOBJNM_1/1/Product Group
IOBJNM_2/1/Customer
I tried several variations of this, but they all didn't work.
Does anyone know how to define such a command?
Thanks in advance for your answer,
Rainer
Message was edited by:
Rainer SIGG

Hi,
Button Design item is used to perform three types of functionalities
1. Workbook specific Commands : these are helpful in performing any changes or navigations in the workbook. For example moving from one sheet to another on the click of the button can be realised.
2. Planning Specific Commands : these are used mostly when a planning scenario is realized using the Bex workbook. Planning commands usually would be to save data in the workbook created on an input ready query to the plan cube, or to execute a planning function or a sequence.
3. Data provider specific commands : Commands used to change data based on a spcfiic dataprovider.
Let me know if you are looking at anything else other than this.
Regards
Snehith.

BEx Analyzer Workbook, display query 2 under query 1

Hello Guys,
actually I got a problem and did not find a solution for that.
I have a query, displaying all cars from one particular salesorg. Under this query I want to add a new query displaying all other cars, not belonging to that salesorg. Now I have two problems:
1) Is there an automated way to display one query among another in bex analyzer, if the number of rows in each query is not constant?
2) Can I negate the variable from my first query (not salesorg in first query)?
Thank You!
Markus

Hi Markus Alber,
why can't you do this in one query?
You can create two selections:
One for that particular salesorg can use restriction on "salesorg"
another selection uses "salesorg" restrictions of excluding that particular salesorg
Feng

Button in bex analyzer workbook

Hello all
I am trying to customize a button in bex analyzer workbook (BI 7).
I want to insert a planning sequence into the button. As far as i know (and as i did ), if the sequence contain variables, i should see in the static parameters : VAR_NAME_1 and VAR_VALUE_1, and so on.
For some reason i dont have the VAR_VALUE_1 part, and if i try to write it i get error.
What is the reason for this?
Best
Yuval

Once I am adding VAR_VALUE_1 to the static parameters, the system generates two messages error:
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program SAPLRRS2 and form GET_SID-1
Best Regards,
Hanit

Error in while Executing Query in the Query Designer

Hi,
I created info Set based two info object and three Data Store Objects. and join condition is Left Outer Join.
there are Business Partner info object, CRM BP Sales View Info Object and Data Store Objects are BP: Roles (0BP_ROLE),Partner: Industries(0BP_IS),CRM Marketing Attributes for Business Partner(0ATR_DS01)
I given some Selection Parameters while executing query in the Query Designer. in That i given city is selection parameters
and i creted variable for this info object.
it gives the Error Messages
Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist möglich
Der Wert "New Delhi " von Merkmal 0CITY40 enthält an der 10.ten Stelle einen Fehler
it is very urgent , can any one help me regarding this.

Hi Reddy,
The Error message in english is this
While reading the data mistakes have appeared. Navigation is possible
The value " New of Delhi " from sign 0CITY40 contains a mistake at the 10.ten place
and i think you need to run the change run and run the report with out selecting the variable option.and navigate in the report by filtering the report for your requirement.
Try this and let me know.
Thanks,
RK

Setting Default Global Settings for Bex Analyzer 7 for all users

We need to set default settings for Bex Analyzer Global Settings when we install SAP-GUI 7.2 in our user's workstations. The current default settings are that all of them are turned off. We would rather not have to run around and change each of our 1,000 user's settings.
Ed:. Apparently [OSS Note 1254112|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1254112] discussed how to adjust Windows Registry settings to resolve this.
Edited by: Charles Belt on Apr 28, 2011 10:01 AM

Just so any one is looking for the correct solution and it worked for me.
Small correction to the information in the OSS note 1254112.
for setting the legacy version setting use the below string in the registry
"LAUNCH_VERSION" = "LEGACY" insted of "LaunchLegacyVersion"
Kiran

Hi I was using whatsapp on my iPhone5.I was not able go to the main menu by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black

I was not able go to the main menu from whatsapp by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black & white. how can i fix it?

Hello monicaa003,
Thanks for participating in the Apple Support Communities.
If your iPhone display turned black and white after holding down the Home button for 2 seconds, first try pressing the Home button again to go to the main menu (Home screen.)
For reference, holding down the Home button for 2 seconds will trigger Siri if that feature is enabled:
About Siri - Apple Support
If pressing the Home button doesn't return you to the main menu, try restarting or resetting your iPhone:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Additionally, if Whatsapp is not responding or working as expected, see the troubleshooting steps at this link:
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Best Regards,
Jeremy

Using Firefox 26. How do I get a close button for each tab at the top of the screen?

Some time ago, I had a close tab button for each tab on the top of the screen. I want that back. I have no additional add ons and the close tab is set to 1. Changing it to 2 does nothing.

Do you have installed this extension?
*Firefox/Tools > Add-ons > Extensions
If you do not have the extension and also have no need for the feature that it provides then you can ignore this.
If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
You can use one of these to start Firefox in Safe Mode:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to display header title for 0MATERIAL texts in the query output?

Dear Bwers,
I have a requirement where i need to display headers titles for 0MATERIAL texts in the query output. (example "Material description"). Any ideas on how to do this?
Thanks
Raj

Kamal,
Its is as below:
Vendor Vendor Name
1001 --- Bright Industries
1002 --- Glow Industries
I want to display the header title "Vendor Name" as the title in the column instead of displaying the text without any header title.
Thanks
Raj
Message was edited by:
 Raj Singh
Message was edited by:
 Raj Singh

I cant send MMS using my iphone 5s . it keep on prompt me a msg "MMS Messaging needs to be enabled to send this message", but inside "setting/message" there's no button for me to ON the SMS/MMS. pls help. Thks

I cant send MMS using my iphone 5s . it keep on prompt me a msg "MMS Messaging needs to be enabled to send this message", but inside "setting/message" there's no button for me to ON the SMS/MMS. pls help. Thks

@Dmitriy Buldakov, have you found the solution to the issue yet? I have the same problem, no option to turn on MMS in my iPhone settings. I checked the settings on my friend's iPhone, which has the same iOS version as me (8.1.1), and the option is there. It's really annoying...

RFCs for the Query Designer

Hello experts,
does anyone know the RFCs which the Query Designer use? (NW04s SP10)
Thanks in advance for your help.
Best Regards,
Marcel

Hi Edwin,
I tried to use this function modules, but it seems that they have bugs, also the transaction rscz, because I copied a query and the copy is different to the original query.
Any suggestions for RFCs for adding characteristics to row, columns and so on?
Thanks in advance!
Best Regards,
Marcel

Execute button for BEx Analyzer in the Query Designer

Similar Messages

Maybe you are looking for