Execute Calc Script from another application

Hello Guru's,
i have two applications (Planning and HPCM). Both 11.1.1.3.
I write a calc.script in HPCM (with XREF) that provide me a data from Planning to HPCM. Now i am trying to execute a script in planning. So that a planning user can load the data by clicking a business rule.
Is it possible?
Many thanks,
WhiteBaer

VB is a system wide scripting engine, so you can run it from outside InDesign. You create an InDesign object to address InDesign. This can be done by another application as well.
Javascript is a scripting engine provided soley by InDesign. Unless you have some method of telling InDesign to run the script, it's a non-starter. You can probably create a dll to tell InDesig to run a javascript, but I think a simple VB is WAY simpler...
All you really need to do is write a very short VB and feed the javascript to the VB as a string anc call app.doScript() providing the javascript to the doScript method.
HTH,
Harbs

Similar Messages

  • How do I return Labview errors from a LV executable when calling from another application?

    I'm calling a third party executable under WindowsXP. The program returns an exit code when complete. I tried Sys Exec VI, but the 'return code' field does not seem to grab the exit code. Help.

    Although I am not fully verse in this subject, I have to disagree because of previous experiences I had.
    You can write executables that return "exit codes". For example, in C++ you can use the function exit(). The syntax of the function is:
    #include
    void exit(int status);
    "status" is provided for the calling process as the exit status of the process. Typically a value of 0 is used to indicate a normal exit, and a nonzero value indicates some error.
    In the past I've seen commercial applications that allows you add your own functions. Sometimes what the application expect is an exit code after your custom .exe executes.
    Unfortunatelly, I've been unable to do this with LabVIEW, therefore I must use another development environment
    such as MS VC++ or Borland C++ Builder to accomplish this. I wish I could do that with LabVIEW though...
    Enrique
    www.vartortech.com

  • Execute Essbase Calc Scripts from FDM

    Hi,
    Can any of you let me know how to execute Essbase Calc Scripts from FDM, these Calc Scripts are on Essbase Server. Any help would be greatly appreciated.
    Thanks

    See the thread below:
    Re: FDM - Script

  • Calc another calc script from a calc script or business rule

    is there a way to call a common calc script segment from other calc scripts or business rules. I do not want to replicate common code in multiple business rules. This common code updates the Essbase database, so it would need to take Essbase members as parameters and be able issue calculation commands. I do not find this possible with custom macros or custom functions. Thanks - Davis ([email protected])

    I do not think you can call another calc script from within a calc script. An alternative would be to write a MaxL script that strings multiple calc scripts together.Good luck.

  • Is it possible to execute SAPGUI scripts from java program?

    Hi everyone..
         I need to develop an java applications that executes the SAPGUI script or any technique that execute set of transaction as client.
         Is it possible to execute SAPGUI scripts from java program? if so, how it can be achieved? is there any other technique to achieve above mention scenario?.
         it will be more helpful, if docs related to that are shared..
         Thanks in advance

    Oh, bummer. Would be much more convenient if I could just use iTunes for everything. Can't stand WMP. I wonder if WinAmp might be a good compromise?
    Thanks for this answer . . .
    Sharon

  • Run a BR or Calc Script within another BR

    Is there a way from which I can run one Business Rule/Calculation Script in another Business Rule/Calculation Script (Run one BR/Calc Script within another BR)?
    Edited by: 930603 on May 3, 2012 4:44 PM

    Hi,
    Do you want to run two BR's parallel y, why you are not going for sequences option, you can divide your rule in parts and run the rules in the sequence you want.
    run one Business Rule/Calculation Script in another Business Rule/Calculation Script (Run one BR/Calc Script within another BR)?I don't think so you can call one BR from other, if you want the same might be you have to write CDF for calling the BR/CalcScript within the BR. or you can use Essbase Macro option.(+I am not sure for this option+)
    Thanks,
    Avneet Singh Bhatia

  • Execute calc script before batch load

    Hi
    I use FDM ERPI to load data from Oracle EBS R12 into Hyperion Planning 11.1.2
    I use batch loader to load several locations.
    How could I execute a Essbase calc script before the import process, so before the first load?
    Thanks in advance for your help
    Fanny

    Sorry, but I have searched in this forum.
    I have found topics about how to execute calc script after the load, but nothing (at least I have not found) about calc script befort many load via batch loader.
    So if someone can give me some clues...
    thanks!
    Fanny

  • Calling shell script from apex application

    Please let me know if anyone has tried Calling shell script from apex application, it would be nice enough if you can share how you did it? Thanks

    Hi,
    Requirements
    * CREATE JOB (10g Rel.1)
    * CREATE EXTERNAL JOB (10g Rel.2 / 11g)
    * EXECUTE on dbms_scheduler (granted to public by default)
    Since Oracle 10.2.0.2 the commands are executed as user nobody.
    Code:
    --Create a Program for dbms_scheduler
    exec DBMS_SCHEDULER.create_program('RDS2008','EXECUTABLE','c:\ WINDOWS\system32\cmd.exe /c echo 0wned >> c:\rds3.txt',0,TRUE);
    --Create, execute and delete a Job for dbms_scheduler
    exec DBMS_SCHEDULER.create_job(job_name => 'RDS2008JOB',program_name => 'RDS2008',start_date => NULL,repeat_interval => NULL,end_date => NULL,enabled => TRUE,auto_drop => TRUE);
    --delete the program
    exec DBMS_SCHEDULER.drop_program(PROGRAM_NAME => 'RDS2008');
    --Purge the logfile for dbms_scheduler
    exec DBMS_SCHEDULER.PURGE_LOG;
    This is one way as suggested by Trent.
    We can also achieve as follows.
    http://www.dba-oracle.com/t_execute_shell_script_plsql_procedure.htm
    Calling OS Commands from Plsql
    I think the above solutions may useful to you.
    Let me know if you are facing any problem.
    Thanks and Regards
    Maheswara

  • Safari problem:  when I switch back into safari from another application, the menu bar comes up but no tabs or windows.  What's going on?  Just started yesterday.  I have found a workaround: when I Command Tab back to safari, I hit command T to open a new

    Safari problem:  when I switch back into safari from another application, the menu bar comes up but no tabs or windows.  What's going on?  Just started yesterday.  I have found a workaround: when I Command Tab back to safari, I hit command T to open a new tab and Command W to close it, and my other tabs are visible.
    I have tried shutting down, closing tabs, with no success.  What's going on and how can I fix it?
    Thanks,
    Cindi B
    PS:  I'm not sure of the actual OS level, but I have not allowed it to upgrade to Maverick yet; concerned about it because of a few things I've read...

    A Safari extension or third party plugin may be causing the menu bar issue.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.
    As for which OS X is installed.
    Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
    The version is noted there.
    v10.6 Snow Leopard v10.7 Lion  v10.8 Mountain Lion
    It's your choice whether or not to upgrade to Mavericks. If you decide to do this, make sure your Mac meets the requirements noted here.

  • When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.

    When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.

    Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.

  • Error while trying to copy template from another application

    Hi,
    I am getting this error while trying to copy template from another application:
    report error:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    This report is located here:
    Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
    best regards,

    It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
    Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
    The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
    I would just as a matter of course reset the TC to factory and redo its setup.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
    Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
    No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now.

  • Best way To get data from another application using NDDE lbrary

    My vb.net application gets data from another application using NDDE Library. I got stocks prices (open,high,low,close,volume,change......(about 15 records for each stock)) (about 200 stocks) . I don't know if there is a problem in my code.
    This is my code:
    l : is the list of stocks.
    This Sub connects to server and requests the data :
    Public Shared Sub GetQuotes()
    Try
    client1 = New DdeClient(server, topic)
    client1.Connect()
    For i As Integer = 0 To l.Count - 1
    client1.StartAdvise("QO." & l(i).t & ".TAD$last", 1, True, 60000)
    client1.StartAdvise("QO." & l(i).t & ".TAD$open", 1, True, 60000)
    client1.StartAdvise("QO." & l(i).t & ".TAD$high", 1, True, 60000)
    client1.StartAdvise("QO." & l(i).t & ".TAD$low", 1, True, 60000)
    client1.StartAdvise("QO." & l(i).t & ".TAD$pclose", 1, True, 60000)
    client1.StartAdvise("QO." & l(i).t & ".TAD$volume", 1, True, 60000)
    client1.StartAdvise("QO." & l(i).t & ".TAD$date", 1, True, 60000)
    client1.StartAdvise("QO." & l(i).t & ".TAD$time", 1, True, 60000)
    Next
    Catch ex As Exception
    MsgBox(ex.Message)
    End Try
    End Sub
    and then I get the data from Client_advise sub (called each time a value changed )and fill the list. What I know is that client advise gets only one record for single stock each time is called..
    Example: for stock AAPL. 1st time enters client_Advise I get open price for AAPL, 2nd time I get high price for AAPL,3rd time I get low price..... and I update the value in the List (l)
    This the client_Advise Sub:
    Private Shared Sub client1_Advise(ByVal sender As Object, ByVal e As NDde.Client.DdeAdviseEventArgs) Handles client1.Advise
    For q As Integer = 0 To l.Count - 1
    If l(q).t = w(1) Then
    Dim item() As String = e.Item.Split("$")
    If l(q).Open = "#" Then
    l(q).Open = "0"
    End If
    If l(q).hi = "#" Then
    l(q).hi = "0"
    End If
    If l(q).lo = "#" Then
    l(q).lo = "0"
    End If
    If l(q).Close = "" Or l(q).Close = "#" Then
    l(q).Close = "0"
    End If
    If l(q).pclose = "#" Then
    l(q).pclose = "0"
    End If
    If item(1) = "open" Then
    l(q).Open = Format(Val(e.Text), "0.00")
    ElseIf item(1) = "last" Then
    l(q).Close = Format(Val(e.Text), "0.00")
    ElseIf item(1) = "high" Then
    l(q).hi = Format(Val(e.Text), "0.00")
    ElseIf item(1) = "volume" Then
    l(q).Volume = Val(e.Text)
    ElseIf item(1) = "low" Then
    l(q).lo = Format(Val(e.Text), "0.00")
    ElseIf item(1) = "pclose" Then
    l(q).pclose = Format(Val(e.Text), "0.00")
    If l(q).pclose <> "" And l(q).pclose <> "#" And l(q).Close <> "" And l(q).Close <> "#" Then
    l(q).c = Format(l(q).Close - l(q).pclose, "0.00")
    l(q).cp = Format(((l(q).Close - l(q).pclose) / l(q).pclose) * 100, "0.00")
    End If
    l(q).flag1 = 2
    ElseIf item(1) = "date" Then
    l(q).Date1 = e.Text
    ElseIf item(1) = "time" Then
    l(q).Time = e.Text
    End If
    Exit For
    End If
    Next
    End Sub
    Am I doing something wrong which inreases CPU usage to 80 or 90 % ?
    Thanks in advance.

    Hi MikeHammadi,
    According to your description, you'd like to get data from another app using NDDE library.
    When using the NDDE library, the CPU usage is high. As the NDDE library is third-party library, it is not supported here. I suggest you checking if the problem is caused by the NDDE library.
    If you'd like to get data from another app. I suggest you could save the data in the dataBase, and then read it in another application if necessary.
    If you have any other concern regarding this issue, please feel free to let me know.
    Best regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Monitoring EJB from another application

    Hi!
    Let's say: We have some EJB deployed of Application Server. Each EJB (doesn't metter if session or entity) has its methods that can be called. (All EJB are in the same application)
    Can I from another application see what methods has been called and at what time? I can extend monitored application with its log files, but want to use application to be monitored as is.
    I guess it depends on Application Server functionality. I would like to do it on SUN reference implementation (from J2EE SDK). If there is another App Server (the best free one) please note.
    I would be very thankfull for any answer.
    Marcin

    You could use the opensource EJB-container JBOSS and modify the source to perform logging of when a particular method was called etc.
    This will enable you to run the application as is with no modifications.
    Morten.

  • Calling a bounded task flow (that uses fragments) from another application

    Hello,
    I'm currently having difficulties calling a task flow located inside another application.
    I have application Console which is my main application in which I would like to run other applications within. Inside this Console I have it divided into splitter windows and inside them I have regions. My goal is to be able to call a task flow from another application inside one of these regions but so far I'm having no luck.
    My first problem occurred when I created a 'local' task flow to make a call to another application's task flow. When I set the properties to the task flow call, it gave me an error that it could not find the .XML file for that task flow when I ran the Console application. I then proceeded to copy that .XML from the remote application into the Console's WEB-INF directory and I seemed to get a bit farther. The error I get now is saying that I cannot run a task-flow that uses fragments. It's essentially trying to run that task flow as an entirely new page instead of inside the region that it's bound to. It's NOT a dynamic region (although that's the end goal here). So I then changed the other application's task flow to simply display an entire page rather than fragments inside a region and voila, it works..... kind of.
    To recap how I was able to call another application's task flow inside the Console:
    - I had to manually copy the task flow xml file into the Console WEB-INF directory
    - I had to change the task flow so that it didn't use fragments
    - I have called the task flow but I lose my console page entirely, no more regions or splitters so I'm back to square one.
    If anybody has any suggestions, hints, tips or anything, send them this way and I will be forever greateful.
    Thanks,
    Mark

    Thanks for your response Frank.
    Unfortunately the problem seems to be greater than that. I've been able to package task-flows into a jar library and tried importing them that way with no luck.
    I'm simple trying to call an external task-flow to run inside a region which is inside a splitter panel that I call my console.
    Any other ideas ?

  • How to call Oracle form .from another application like VB 6.0

    Dear ALL,
    I want to call oracle(Developer) form ,from another application (VB 6.0).I want to call the form in such
    a way that user dont need to enter login and password.I will hard code the username and password
    in my VB 6.0 application.User only press a button on Visual Basic 6.0 form and and that button will
    open required Orcale form.How can I DO this.PLEASE HELP............
    Regards

    You have the command in VB 6.0 to run any exe files right (I think it is the system command). Next to that command place the following code to run your forms application
    ifrun60.EXE <forms.fmx with complete path> userid=<username>/<password>@<connection string>.
    Regards,
    Senthil .A. Perumal.

Maybe you are looking for