Execute  HCM Process and Forms on Enterprise Portal ?

Hi Experts,
I have done a scenario on Employee Relocation Process with the reference of the  tutorial specified in help.sap.com. [Here's the link|http://help.sap.com/erp2005_ehp_04/helpdata/EN/fe/1bd54243063658e10000000a155106/frameset.htm] in HCM Processes and Forms
The following are steps  which i have done so far ....! relevant to that tutorial .
1) Created ISR Scenario
2) Created Form Scenario
3) Created Linkage between ISR and Form Scenarios.
4) Checked the consistency of the Linked ISR and Form Scenarios. Everything was fine ...
I have designed the form layout with relevant form fields that are required for the relocation process (HCM Forms)  and created a workflow template with all the required steps specified in the tutorial .
Now my questions are as follow's:
1) how to test the HCM process ?
2) In which environments can I test the process ?. Can I test HCM process in Enterprise Portal if yes how  ....?
3) In what way thus MSS and ESS are connected to HCM Process and Forms.
I am confused about this, can you experts please explain in details ...!
Use full Answers are rewarded  must
Thanks
Mukkalla.sap

Looks like a program error to me.
Running a system on SAP_ALL to make it work cannot be a solution, so do an ST01 trace to find out which authorization exactly is missing and what is checked before the dump, and consider adding it if appropriate.
Cheers,
Julius

Similar Messages

  • Use HCM processes and Forms without using the Enterprise Portal

    is it possible to leverage existing HR Admin Services (HCM processes and Forms) functionality without using the Enterprise Portal?
    1) Create an Adobe form and Interface using SFP
    2) Set up ISR and Form Scenario
    3) Set up Forms configuration to use existing Backend and generic Services
    4) Set up workflow to updated Backend using Services
    is it possible to do the above steps and not use the Portal? If Yes, how do we present the forms to the Manager, and provide different buttons that appears on the Portal by default?
    Any ideas will be greatly appreciated.
    Thanks,
    Saurabh

    Hi Saurabh,
    your assumptions and findings (items can not be started from the backend workflow inbox etc.) are correct: These processes can not be started without the Portal and it is not intended to do this.
    The above mentioned backend report are only forseen for implementation and testing purposes and not for productive use.
    In addition to the fact, that you already can't execute the work items a lot of other features of the framework (Process Browser etc.) are only available through the Portal.
    Best Regards
    Michael Bonrat - Solution Manager HCM Processes and Forms
    Info about HCM Processes and Forms:
    www.service.sap.com/erp: 
    - SAP ERP Human Capital Management -> Workforce Process Management -> HCM Processes and Forms

  • Dump while Executing Hrast_dT (Design time of HCM Process and Forms)

    Hi All,
    I am getting Syntax Error Dump while Executing Hrast_dT tcode (Design time of HCM Process and Forms) and here with i have mentioned the source code also ist contained in standard class.
    *METHOD constructor.
      DATA:
        badi_context          TYPE REF TO lcl_badi_context.
      CALL METHOD super->constructor
        EXPORTING
          form_scenario         = form_scenario
          form_scenario_service = form_scenario_service.
      DATA:
        t5asrfscnsrv_wa TYPE t5asrfscnsrv.
      SELECT SINGLE * FROM t5asrfscnsrv INTO t5asrfscnsrv_wa WHERE form_scen_srv EQ form_scenari
      ASSERT sy-subrc EQ 0.
      ASSERT t5asrfscnsrv_wa-service_type = 'GENSRV'.
      fill_table_metadata( ).*
    i followed this link also..its not working for me..
    [Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3]
    Regards,
    Parthi

    Hello Parthasarathi,
    Please, try to implement the note 1075650.

  • Portal PCR and HCM Process and Forms.

    Hello,
    We have a request from client that they want to use SAP Personal Change Request (PCR) in MSS role.
    So when we tried to configure it, A error was thrown to us as :
    com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to  UPDATEDATAINPDF
    u2026u2026
    Caused by: com.sap.tc.webdynpro.services.exceptions.PDFDocumentCreationException: ../../sap.com/msspcr/PcrApplication/wd_key48u2026..
    So after looking for the cause of error we came to know that this requires an ADS (Adobe Document Service) to be activated.
    Now we came to know that it requires some additional licence from SAP (Please verify this statement....if anybody has faced this issue)
    So we now decide to use HCM Process and Forms for our client...
    How ever when we try to access that in portal it says "Resource not Found".
    After looking for the same in SAP help we came to know that it requires some
    Business Package for HR Administrator (SAP ERP)
    HR Administrative Services (PA-AS).
    Now how can I know that whether we have these components already deployed in Portal / R3.
    And if I get them, then will there be again a need for ADS (Adobe Document Service).
    Please comment on the same.
    Thanking you in anticipation.

    Hi Saurabh,
    Yes the error you are getting is for the ADS and interactive forms does have additional licenses for online forms but this totally depends on the package that you use.
    For e.g IF you have SAP E.C.C 6.0 with Ehp4 then there are standard HCM processes and forms available that comes with the package .
    In this case you can check in your sandbox if the sample processes works and verify with SAP for the usage.Since the cost depends on per form per user basis.
    Note :
    For SAP supplied interactive forms, no additional cost.
    As for custom interactive forms, there is an additional cost.
    For checking if HCM processes and forms are available in your system :
    You could go for the t.code HRASR_DT or Configuration of Design Time can be accessed in the IMG under Personnel Management > HR Administrative Services > Configuration of Forms/Process.
    However you need to check with the BASIS and portal guys for roles and authorizations.
    Hope this info helps.
    Regards,
    Aravind.P

  • Dynamic navigation, on HCM Process and Forms "Web Dynpro FORM"

    Hi,
    I'm trying to solve an issue regarding dynamic navigation, on a enhacement done at the Web Dynpro ABAP QISR_UI component for HCM Process and Forms.
    I'm hiding the Adobe Form, and doing "do_dynamic_navigation" for a dynamic generated view container present at the VIEWSHOWFORM on the QISR_UI component.
    The code works great, i.e.: the Adobe Form remains hidden and the custom form, using Web Dynpro appears.
    I'm also using the HRASR00_PROCESS_EXECUTE_1 component to execute a Portal IView (Floorplan based component).
    When the process is started, and the folowing actions are executed:
    1- Select Employee
    2- Select Process
    3- Edit form
    4- Press back (for example if the wrong process is selected)
    5- Select the Process
    6- Edit form again
    There is a NULL exception, the "embedding_vca" (below) is NULL
    SAPLWDR_RUNTIME_REPOSITORY
    METHOD: IF_WD_RR_VIEW_USAGE~GET_EMB_VIEW_CNT_ASSIGNMENT (LCL_VIEW_USA
    * method IF_WD_RR_VIEW_USAGE~GET_EMB_VIEW_CNT_ASSIGNMENT
      method if_wd_rr_view_usage~get_emb_view_cnt_assignment.
        result = me->view_usage->embedding_vca->get_api( ).
      endmethod.
    "IF_WD_RR_VIEW_USAGE~GET_VIEW_CONTAINER_ASSIGNMENT
    Can you guys give me an hand?
    Regards

    Hello,
    Basically what I did was replacing the Adobe Form, by a Web Dynpro component that contains its own form, and associated logic.
    Tecnically the steps to acomplish the task were:
    1º Development of a component for showing a form. ( I suggest you to start with just a "hello world" or something very basic )
    2º Enhance the QISR_UI component (VIEWSHOWFORM view, on the modify view method), something like
    if form scenario = XXXXX then
    hide the adobe form;
    create a custom view container (the problem I had above), and create an instance of the component created on step 1
    end if
    3º Access the context that the original form returns (you can check the context debugging the VIEWSHORFORM view )
    4º Pass the context to the component created..
    I can't provide further details on this, I'm sorry...
    I do not suggest doing this, this was a requirement so I had to do it... But this requires a lot of workarrounds, and lots of small changes in standard code related with process and forms... It's not, also, a "clean" solution
    Regards,
    Joã

  • Adobe HCM Processes and Forms Start processes iView error

    Hi,
    We are implementing Adobe HCM processes. The forms based on the PCR technology are working fine. However, we want the new HCM Processes and Forms technology. We have implemented Business packages for MSS, HR Administrator and XSS (PC_GUI). ADS is configured correctly as the PCR Adobe forms are working fine.
    We want to use the WebDynpro version of HCMPF and NOT the ABAP version. When starting the Start Processes IView (sap.com/paasrprocst) we get the error:
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst
    at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:361)
        at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
        at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
        at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
        at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:448)
        ... 40 more
    See full exception chain for details.
    System Environment
    Client
    Web Dynpro Client Type HTML Client
    User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 1.1.4322; .NET CLR 3.0.04506.648)
    Version null
    DOM version null
    Client Type msie6
    Client Type Profile ie6
    ActiveX enabled
    Cookies enabled
    Frames enabled
    Java Applets enabled
    JavaScript enabled
    Tables enabled
    VB Script enabled
    Server
    Web Dynpro Runtime Vendor: SAP, build ID: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:13:14[UTC], changelist=455669, host=pwdfm101), build date: Sat Jan 19 11:19:58 AST 2008
    J2EE Engine 7.00 patchlevel 109044.44
    Java VM Java HotSpot(TM) 64-Bit Server VM, version:1.4.2_12-b03, vendor: Sun Microsystems Inc.
    Operating system SunOS, version: 5.10, architecture: sparcv9
    Session & Other
    Session Locale en
    Time of Failure Thu Mar 13 13:07:45 AST 2008 (Java Time: 1205402865554)
    Web Dynpro Code Generation Infos
    sap.com/pb
    SapDictionaryGenerationCore 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
    SapWebDynproGenerationCore 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
    sap.com/tcwddispwda
    No information available null
    sap.com/pb_api
    SapDictionaryGenerationCore 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
    SapWebDynproGenerationCore 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
    sap.com/tcwdcorecomp
    No information available null
    Detailed Error Information
    Detailed Exception Chain
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:527)
         at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:191)
         at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: javax.naming.NamingException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst [Root exception is com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst]
         at com.sapportals.portal.pcd.gl.JndiProxy.getObjectInstance(JndiProxy.java:51)
         at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:919)
         at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:692)
         at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:69)
         at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java:238)
         at javax.naming.InitialContext.lookup(InitialContext.java:347)
         at com.sap.portal.pb.data.PcdManager.doInit(PcdManager.java:72)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:525)
         ... 31 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst
         at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:361)
         at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
         at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
         at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
         at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:448)
         at com.sapportals.portal.prt.jndisupport.DirectoryManager.getObjectInstance(DirectoryManager.java:56)
         at com.sapportals.portal.pcd.gl.JndiProxy.getObjectInstance(JndiProxy.java:47)
         ... 38 more
    Can anyone tell me more about the cause this might have? Also, are there any further prerequisites for this iView to work?
    Any help will be appreciated and rewarded accordingly.
    Regards,
    Thomas

    hello,
    how did you solve it ?
    Regards,
    Dimitry Haritonov

  • HCM Process and Forms - Authorization issue

    Hi Experts,
    I have to developed one HCM process and forms for leave request. Workflow is assigned to the form. When I test the Process with in the R/3 using Txn 'HRASR_TEST_PROCESS' I got the Error,  Work Item Not Found; Workflow Not Started" and "Process Object Not Created".
    Then I tested the same Process with the user who is having SAP_ALL role and now the workflow is triggered and can able to see the work item in the portal UWL. With SAP_ALL everything was fine.
    But my client will not give SAP_ALL role to all users. So I need to find, what are the roles and authorization objects need to execute the HCM process and forms.
    I checked the Help documentation, and I found P_ASRCONT is needed for HCM forms and process. So I assigned to the user but still, the forms getting error.
    Thanks,
    Helps will be highly appreciated.

    Thanks for your reply.
    Transactions su53,st01 and st05 didn't help.
    Any tables or specific transaction for HCM process and forms will be helpful.
    Thanks.

  • HCM Processes and Forms: Work Item is not opening

    Hi,
    We are implementaing HCM processes and forms using NWBC (EHP7 - HR Renewal 2.0 FP1) and after using configuration of POWL inbox for MSS and HR Admin, We are not able to launch the Work Item.
    1) In MSS Work Book, while launching, we are getting message  -
    Failed to resolve Object Based Navigation target ".MSS_WL.NAVIGATE_FORM_WD". Use transaction PFCG to define this OBN target in a role or contact your system administrator to assign a role with the relevant OBN entries to your user.
    2) For HR Admin, we are getting message - Work Item can only be open using Portal and UWL. and it is displaying back end transaction SWNWIEX.
    Detail configuration steps are shown as below -
    Workflow Task used in configurations -
    1) Entries in IBO_C_WF_TA_P_SC  (Assign Task ID’s to POWL Types)
    2) IBO_C_WF_ACC configuration - (Define Tasks and Actions)
    3) IBO_C_WF_APC configuration (Provide Details of navigation parameters)
    4) IBO_V_WF_TTAC (Assignment of Actions to the Tasks)
    5) IBO_C_WF_TAC (Specify Default Action)
    Error -
    1) MSS -
    2)HR Admin -

    Hi Guru,
    Any input..its urgent!.
    Regards,
    Vijay

  • Error in MSS HCM Processes and Forms Overview

    Hi all,
    Currently we are working on ESS/MSS from NW 7.3 portal.
    When i open HCM Processes and Forms Overview from MSS, it prompt me to change the password again and again.
    And on some user HCM Processes and Forms Overview not shown properly.
    Error while processing your query
    What has happened?
    The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
    Note
    The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
    The error occurred on application server MUMSAP02_BEQ_00 and in work process 8 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
    Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
    Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
    What can I do?
    If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
    If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
    If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 8 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system adminmistrator.
    Error Code: ICF-IE-http -c: 350 -u: ISHAJI -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 8 -d: 20130514 -t: 133514 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF8DA00F61FBEAC0_D4AE5218F8121ED2AF8DA00F5D19EAC0_1 -x: 006DBCE20F7BF1E58AC0D4AE5218F812
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Please suggest me the solution.
    Regards,
    Devendra

    Dear Andrea,
    I reset the password of backend user and gave sap_all and sap_new role.
    Last time it prompt the screen in mss as to change the password. (See above screen shot).
    But after reset the password...error showing instead of login screen in mss as below:
    Error while processing your query
    What has happened?
    The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
    Note
    The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .  
    The error occurred on application server MUMSAP02_BEQ_00 and in work process 7 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
    Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
    Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
       What can I do?
    If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
    If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
    If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 7 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system adminmistrator.
    Error Code: ICF-IE-http -c: 350 -u: IKHASU -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 7 -d: 20130514 -t: 175940 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF923E065A39EAC0_D4AE5218F8121ED2AF923E394271EAC0_1 -x: F091BCE2D132F1D58AC0D4AE5218F812
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    I checked log in ST22 as below
    What happened?
        The exception 'CX_PARAMETER_INVALID_RANGE' was raised, but it was not caught
         anywhere along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program
         'CL_ABAP_TSTMP=================CP' has to be
        terminated.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_PARAMETER_INVALID_RANGE', was not
         caught in
        procedure "SUBTRACT_TIMESTAMPS" "(METHOD)", nor was it propagated by a RAISING
         clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        Parameter has invalid value: Parameter TSTMP1 has invalid value 0.
    Regards,
    Devendra

  • Workflow could not start in HCM process and Forms

    Hi All
    It would be really helpful if you can suggest possible solution regarding case management case in HCM forms and process.
    I have set up a simple custom HCM process and Form regarding Infotype 2 updation. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Exception occurred - Error when starting work item 000000007031
    PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
    CREATE - Error when creating a component of type 'Step'
    CREATE_WIM_HANDLE - Error when creating a work item
    CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
    Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
    I have searched few SAP notes such as 1384961 which talks about same error but it is implemented in our system (EA-HR 604 , Patch 27, )
    Appreciate any help.
    Thanks
    Umang

    Hi Swati
    One of the similar (not exact) issues were resolved by correcting the event linkage....please refer thread:
    http://scn.sap.com/message/14848795#14848795
    Not sure of the details of the the resolution, maybe Ragavendran Kanagaraj can throw more light.
    Just some high level checks (if not done already):
    Check event linkage errors in SWEQADM if anything is related to your WF
    Check in SWEL if it's showing any more details (not sure if it will)
    Any warnings in syntax check of WF template (PFTC) or WF definition (SWDD)
    Any error sin binding
    regards,
    Modak

  • Query on HCM Processes and Forms

    Hi
    I am facing some issues in configuring Hiring Forms in HCM Processes and Forms. I can place them in 2 baskets and describe each of them below. I would appreciate any advise on ways and means to overcome these errors.
    Basket #1
    I want to use the standard forms SHU1, SHU2 in development environment to understand the HCM P&F functionalities. I copied these form scenarios from client 000 and did all the configurations as outline in IMG activity HRAdministrative Services >> Configuration of Forms and Processes >> Sample Processes for HCM Process and Forms.
    When I run a check using HR Administrative Services >> Configuration of Forms and Processes >> Configuration of Forms >> Check Consistency of Form Scenarios and select Form name, I get errors along following lines:
    u2022     Error Message Sample#1 Form scen SHU1 vers. 00000 serv. SAP_PA: Only one deflt value allowed for field I0009_ZLSCH
    u2022     Error Message Sample#2 Form scen. SHU1 vers. 00000 service SAP_PA: Field I0007_ARBST default value is not created
    u2022     Error Message Sample#3 ISR scenario SHU1 version 00000: Field I0001_BUKRS is missing
    u2022     Error Message Sample#4 Form scen. SHU1 vers. 00000: Field I0007_ARBST service for default values not required
    However, at the bottom of the log I see this message in Green: Form scenario SHU1 version 00000: Form scenario is consistent
    I tried to make the changes as suggested in the Long Text for each of these messages. Probably due to the fact that I am using standard delivered forms, I get this message u201CDo not make any changes (SAP entry)u201D and I am unable to save the changes.
    Basket #2
    In this basket I have Org_Change form and have managed to go the whole nine yards and complete the configuration in ECC. The consistency checks for process and forms are in green. However, I am unable to start the process through Portal. I get this message u201Cno data availableu201D when I try to select a process.
    Among the 5 roles delivered in SAP as initiators for processors u2013I am interested in 3 of them HRASARA (for HR Administrator). I have configured HRASRA and HRASRB as initiators for Org_Change. However, I am not able to figure out how to link these roles to portal roles such as SAP_ASR_ADMINISTRATOR, SAP_ASR_MANAGER etc.
    I would appreciate any advise on ways and means to overcome these errors.
    Thanks
    Subhash

    Have you been able to fix your issue in Basket # 2 ?

  • Use of BADI in HCM Processes and Forms

    Hello Friend's,
                I am feeling trouble in learning HCM Processes and Forms.. Actually i dont know what is the role of BADI in HCM Processes and Forms. one more thing i need to know is OPERATION for backend service. What is the use of operation and how i can trigger the badi methods when running in portal.

    Hi Ramesh,
    Hope this is not too late to help.
    Do_operation will be called whenever there is roundtrip, by triggering event USER_EVENT_CHECK using form scripting.
    example,
    To trigger roundtrip for a drop down list, under exit* event add this
    xfa.record.CONTROL_PARAM.ISR_EVENT.value = "USER_EVENT_CHECK";
    ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
    regards,
    Xiang Li

  • WS17900260 - Task TS17900108 resulted in error, in HCM Processes and Forms

    Hi,
      I have designed a HCM process and workflow. In custom workflow ,WS17900260 (TS17900108) has been used to save data. In this step it is resulting in error and shows the below message in "Step History" tab. No message in Message Tab.
    Work item 000000172044: Object CL_HRASR00_WF_COMPONENTS method SAVE_FORM_DATA_TO_DB cannot be exe
    Message no. WL821
    An exception with the type CX_HRASR00_PROCESS_MODE LLING occurred, but was neither handled locally.
    I tried executing the associated method and I did not get any error. Please let me know if anyone has faced this issue and how it is resolved.
    Thanks,
    Sri

    Hi Sri
    Expecting a prompt answer in 2 hours time is a tad too demanding for all of us
    We try to help you based on our experience and if we do not have it, we just wait for the right one to respond.
    It is not that I have experience in HCM Processes and Forms, but a little bit of googling to help you gave me the following:
    1) SAP Help for your task TS17900108 states that it has the same requirements for binding as that of task TS17900107 .... check the latter half of the page here:
    https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f28f8a1e5132c3e10000000a1553f6/content.htm
    2) If you check TS17900107 binding requirements, it needs certain necessary parameters which may be causing the issue. Check the mandatory requirements here:
    https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f2cf2c249b3268e10000000a1553f6/content.htm
    Also check for authorizations
    3) See how another user solved the issue with the same method here:
    http://scn.sap.com/thread/1753027
    4) See the possible advice for a similar issue with task TS17900107 (which is kind of similar to your task)
    Novice in HR forms and processes workflow - help in usage of TS17900110
    I checked various threads and the common link is that it all depends on your system and the bindings or the custom functions called within. Also do check for authorizations as mentioned in the first link from Help.sap.com
    I am sorry, I cannot give you further details because I myself do not have experience in HCM P&F. I am sure you too can google further from here, or we can be a little more patient for others to reply (I understand that some issues are critical and need immediate resolution, but we all are busy in our own projects and sometimes are not able to reply immediately).
    Regards,
    Modak

  • HCM Process and Forms Dynamic Actions

    Hi
    We are implementing HCM process and forms and presume that dynamic actions will have to be recreated as rules.
    Can anyone give any guidance in this area as some of our dynamic actions are quite complex.
    Many thanks
    Ian

    Hi,
    For HR forms please follow the following link
    HCM Processes and Forms (www.service.sap.com/erp:  - SAP ERP Human Capital Management -> Workforce Process Management -> HCM Processes and Forms -> Media Library)
    https://websmp205.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000081848&
    A dynamic action has the following components.
    Infotype Number (INFTY): specifies the infotype for which you want the dynamic action triggered
    Subtype (SUBTY): narrows the focus to a specific subtype
    Field Name (FIELDN): starts your action when a maintenance function is performed on a particular field
    Function (FC): specifies the various maintenance operations to which your dynamic action would respond. They are 02 (change); 04 (create); 06 (create and change); 08 (delete); 10 (change and delete); 12 (create and delete). Dynamic actions are only applicable in maintenance operations, not in display functions.
    Sequence Number (NO): refers to a sequential number.
    Step (A): specifies a particular type of action. No dynamic action is executed if the function character has a value other than one of the following:
                 P: Plausibility checks, which allow you to check certain conditions.          
                 I: Calls an infotype for processing
                 W: Called after the I statement and used to assign values to screen fields while creating or copying another infotype record through the I statement 
                  F: Calls a FORM routine (subroutines in ABAP) during your action. The routine may reside in or out the module pool MPNNNN00.
                 V: Lets you treat collectively a number of fields for which you want to define a common dynamic action
                  M: Sends SAP Office mail
    Variable function part: The variable function part along with the step indicator forms the core part of your action. It specifies the processing details when the dynamic action is triggered. For example: 
    Requirement: When the postal code or the city of an employeeu2019s permanent residence is changed in infotype 0006, an email should be sent to the administrator.
    INFTY    SUBTY    FIELDN    FC          NO.    STEP       VARIABLE FUNCTION
    0006           1             ORT01      06             001           V               PSTLZ            
    0006           1             PSTLZ      06             002           M               M0001
    The V statement on line 001 is used to link the two fields to the M statement. The statements relevant to field PSTLZ are also applicable to the ORT01 field.
    When a record is created or changed in infotype 0006 of permanent address, an email is sent using the feature M0001. Information such as the recipient address, subject, and content of the mail is derived from M0001.
    Warm REgards,
    Kapil

  • Workflow issue in HCM Process and Forms

    Hi,
    I have created one  workflow for HCM Process and form ( Termination) . In that workflow, there are Two levels. First and second level is approved by the respective managers. I am using the Standard TASK TS17900100  both levels having the  Send,  "BACK TO AUTHOR" option.
    When I initiate the form it has generated the process reference number, it went to first level approval  and the respective manger received work item in his UWL inbox  in this stage I have checked in backend (PA20)  infotypes( 0 & 1) are updating automatically and employee has been terminated without approval of work item.
    I have checked in workflow log the work item has with first level manger only.
    any one please help me on this.
    Regards,
    Srujan

    Hi,
    TS17900101 uses --> CL_HRASR00_WF_COMPONENTS / Method WI_EXECUTION_VIA_R3_INBOX.
    In the text of the method you can read the following:
    It is only allowed to trigger a WI via UWL which does not execute
    that method which was customized at the corresponding task (so this
    method). To ensure this if the WI was startet via R3 Inbox then
    exactly this method is called to present an error.
    So, are you approving from UWL or SBWP?
    Regards,

Maybe you are looking for

  • How could I export FCE project into XML format?

    Hello, I recently decided to upgrade from Final Cut Express to Final Cut Pro X. But I don't seem to be able to export my FCE unfinish projects. That is because FCE  does not export into XML format !!! Does anyone knows how to have FCE to generate a X

  • My iMac freezes when time machine is running a backup

    Hi Guys, this is an iMac that had tiger and I upgraded to 10.5.8 I am using time machine with a 2TB external flex drive from seagate (brand new item) The back ups went smooth for the first few days but now my iMac totally freezes up at least once a d

  • JTabel Horizontal scroll bar problem

    Hi, I want a horizontal scroll bar added to my table hence I do this table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF); but the problem is If I increase the size of frame the cells do not resize hence there is a gap after the last column. How do I remo

  • Nokia 6120 SIS Installation

    Hi. Ive tried to install PGR V2.0 SIS Game on my phone, Yet it pops up with the message "file format not supported". Ive searched this forum and tried all the methods. None have worked. I am running V 3.70 and i believe 6120's run S60. Is there a way

  • Ready to break the iPod...or something.

    I'm ready to just throw it out the window.