Execute import is in disable status

Hello,
I have created simple flat table with only one column.
I have created simple text file and created system dsn for the same.
I did mapping using "Map Fields" option in MDM import manager. I also added the required column in value matching.
How to execute this to get data from flat file? "Records --> Execute Import" option, is in disable mode. How to get data from flat file through mdm import manager?
Please help me.

Hi Rama
If your execute import is disabled then please check the following things
1)In match records Tab(next to map fields) just see if you have added a field to your right hand window pane.this combination would actually uniquely identify your records.Atleast select one field there.
2)In import status tab strip First check what message it is giving.If in right hand side window pane it shows that there are records it has matched and you are doing this for first time then choose 'CREATE' or if you want you can choose REPLACE but that only when you have created the recoeds once.
Now see your import button status.
Hope this helps
Please mark helpful answers
Regards
Vinay

Similar Messages

Execute import button disabled

Hi,
I am trying import some xml file into siple table through import manager. I did the maping of the columns, I chose the column for matching. Now I am in the Import Status tab, I can see "Choose import action" under Action (I dont have the english version, so the text in english could be a little bit different) but the "Execute import" button is still disabled. Can anybody help me solve this problem?
Thanks
Ivo

Hi Lvo,
Did you select impot action [Skip, Create, Update (Null fields only), Update (All Mapped fields), Replace] from the "Match record" tab?
Hope this would be the problem. Please check
Thanks,
Arun prabhu S

Problem about execute import button

This is mdm 5.5 sp4.
First, i did field mapping and value mapping in mdm import manager. Then i clicked 'execute import' button. The importing was successful.
After that, I added new fields in destination fields of field mapping panel via add button, and finished new filed mapping and value mapping. Then I activated the import status tab, but found the execute import was gray. I couldnt click the button to import new fields and values. Whats wrong? What should I do?
Thank u in advance.

hi,
if the execute import was gray:
these may be the causes.
1. check the field mapping, and value mapping
2. Redo the Record mathcing step.
3. when you click on the import status tab, if execure import icon is grey, in import status, you will find the remarks( like, partcicualr field is not mapped -- etc.)
do the process again, you can able to see execute import icon.
hope this may help you,
Regards,
Srinivas

EXECUTE IMPORT button is not activated.

Hi Experts,
I am importing some records to MDM using MDM-Import Manager ...
i have done the Field Mapping then Value Mapping and Match Record Strategy...
here in the Status i even see that 20 out of 20 Fields are Mapped and 20 out of 20 Values are Mapped.
but the EXECUTE IMPORT button is not activated ..... Please help .. ....
i am using Execl file for doing it .. as a Source ....
regards,
Jay Sawant.

Hi Jay,
Just try removing the matching field or field combinations as you have used and Select them again.
Sometime resetting the matching field tab the import action is enabled.
Also check if you have selected the correct Import action like Create for new records and Update or Replace for existing records.
Check on these two areas matching field and import action.
Hope It Helped
Thanks & Regards
Simona Pinto

Beginner's Zenworks - disable status

here's a very rudimentary question for someone just starting out with
Zenworks.
What does the "disable" status do for policy parameters?
I understand the concept of "ignore." I am not sure how "disable" differs
from "ignore."
thanks in advance

Thanks, very clear.
Just one more question though - does this mean that "disable" status rolls
back the setting in the registry to some local setting prior to the ZEN
policy taking effect?
>> Enabled
> The attribute is enabled in the client.
> Any values you enter for it are applied.
>
> Disabled
> The attribute is disabled in the client.
>
> Ignored
> The attribute is ignored (not changed in the client).
> If the attribute is already enabled in the client, it remains enabled.
> If it is already disabled in the client, it remains disabled.
>
>
>

'Import All' is disable at Image Capture

Hi!!
I just upgrade to Yosemite, and when I insert an SD (only photos) to my MacBook Pro, the Image Capture program shows up. But when I want to import all media, the button 'Import All' is disable.
Does any one knows why is happening this?
This is the same SD that I was using with my Canon, and did not had this problem with Mavericks.
Thanks a lot in advanced.

Thanks Glenn Leblanc!
I think there is a problem with the software.
I tried this:
1. Hide the 'Devices' list.
2. Show the 'Devices' list.
3. Then selected the SD, and magically the 'Import All' button became available.
Even if you select 1 file from the list, the button is available.
Greetings!!

OID resource goes to Disabled Status after running the post process event handler

Hi,
We have an event handler on post update operation. The event handler using the user manager API to do some modification. We are using the "Lock()" function of User Manager API to lock the user based on attribute value. After running the event handler though the user gets locked as expected, it also disables the OID resource after that. We have other resources along with OID but they are not affected with event handler. Only the OID user is triggering the disable operation on locking the user on event handler. We have used the OID 11g Connector for implementation.
If you manually lock the user in user interface it's not going to disable status.
How we can stop to disable the OID User Account.
Thanks

No.If you lock the user in Console it's not going disable status.
Thanks

Could not execute 'IMPORT FROM '/dropbox/S0008356087/NASDAQ.ctl''

Hi All,
when i am trying to execute the following SQL command in Hana 7 server i am getting the following error message.
Error message:
Could not execute 'IMPORT FROM '/dropbox/S0008356087/NASDAQ.ctl''
SAP DBTech JDBC: [2]: general error: Cannot open Control file, /dropbox/S0008356087/NASDAQ.ctl
I have checked all the syntax and all are fine.
my doubt is first i have assigned to hana 5 server.after that due to some outage they have migrated me to hana 7 server.
due to this do am i getting or i don't have access to that directory.
Here is folder that i have created the hana dev center.
Folder name : S0008356087
and last is for all the hana servers is FTP folder is same or it will change from server to server

Hi Jagan,
Please try again now - your suspicion was absolutely right: you didn't have access to the folder from the new server. Should be fixed now...
--Juergen

Cannot execute import/export database hana studio

Hi,
We need to create a new Test company from the Productive Company Database, A few days ago we didn't have any problem executing the import/export functionality in HANA Studio:
export "DB_PRD"."*" as binary into '/hana/Backup' with replace threads 10;
import "DB_PRD"."*" as binary from '/hana/Backup/' with replace threads 10
rename schema "DB_PRD" to "DB_TST";
But now, when we want to do this we have the next error:
Could not execute 'import "DB_PRD"."*" as binary from '/hana/Backup/' with replace threads 10 rename schema ...' in 674 ms 276 µs .
SAP DBTech JDBC: [2]: general error: DB_PRD.ETL_S DB_PRD:OACT_tracking not found in the import directory.
Does anyone has the same situation?

Hi,
Please check SAP note:
1944485 - Cannot import schema into SAP HANA if data staging is
enabled
Thanks & Regards,
Nagarajan

Disabling status messages

Can someone tell me how to disable status messages in the web
browser status bar during network communication for Flex 2
applications? Can the same approach be used for HTTPService and
URLLoader requests? Specifically, I'm referring to the
"Transferring data from...", "Waiting for...", "Connecting to..."
chatter during requests. Or, just point me to an example that does
this. Thanks.

I have exactly the same printer and crazy problem. Hopefully someone will reply with a fix...

Execute import is greyed out

Hi ,
Why I am not able to execute import functions from Import Manager . This command is greyed out for me .I am trying to load an hierarchical data sets from a text file .
Can someone pls suggest to solve this out .
regards,
Amit

Hi Amit,
If u are importing a hierarchy then there are certain check outs u need to follow.
step 1:
First if u are declaring a field as a look up u need not mention the fields inside the look up table which are included as the childs of the root node declared as the look up.
step2:
U need to either split the field containing the values or combine them(constitute a hierarchy) as depending on the source .
step3:
Doing this just split the field selecting the option split into hierarchy.set the split delimiter as per the source.
step4:
Note here that the new field that is created have to be named differently.Map the field(new) tyo the field in the destination side.
step5:
Doing this just click the Node expander on the source side select all the siblings under the root node and select the option add as child.the values (tree) will be duplicated on the destination side with the leaf nodes mapped.
Note:Only leaf values have to be mapped.
Reward me with points if u find this blog helpful.
Thanks & Regards
Deepankar Pandit

My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

That's usually a symptom of a phone that was hacked or jailbroken to unlock it.

Query disable status in bex query designer

hi all,
when i opened query in query designer for PA_PA cube it is in disabled mode.iam unabled to restrict or do any changes.and giving error like "the dependent objects are in different transport orders."i installed this particular queries in BI content also.please help me in this issue.
Regards
Vamshi D Krishna

Hi Vamshi,
go to rsa1 - transport connection and select ur query and drag & drop into third screen
u can see the locked request no. of ur query ..
u can take that no. and go to se03 -- give that request no. & execute unlock..
now, again come back to ur transport connection, now u can see under ur query no transport request has been assigned.. select the truck symbol..
It will ask u for the new request no. assign a new request no. of urs and check the query at the designer level. u can able to change the query ..
Hope it helps.
If u have any doubt reply to this message.
Thanks & Regards,
V. Vijay Kumar.

MDM Import Manager Ports Disabled

Hi,
I created remote system in Console and tried to import XML file using Import Manager using port option. The port I created in console is appearing in the drop down butis greyed out
Can anyone help please.
I have the XML File in the Ready Folder
Thanks.

Hi Harsha,
Are you using an XML schema to import the XMl file into MDM?
With higher versions of MDM, you need to import the XML file using a related XML schema which you have to upload in Console and also choose in the Port setting.
This completes the linking of the XML schema with the port and when you place an XML in the port, it automatically chooses the XML schema mentioned and imports the file.
You need to choose the XML schema in the Format property of the Port. And then mention the XML schema in the XML schema property of the Port. You will find all these properties under the Port table under the Admin Node in the Console.
I guess, you are not using the XML schema and hence the port might be disabled. Please check it out. Also after doing this, doing this, place the file in the inbound port ready folder.
Hope this info help.
Thanks and Regards
Nitin jain

How to disable status bar messages

hi,
while loading a form or running the forms applications, forms applet writes log to the status bar of internet explorer.
i want to disable some of these messages. because i am listening status bar, for a specific message and these messages causes performance problem.
is there a way to do it?
regards , Engin.
here are the messages i logged :
Finding site: 10.222.4.51
Connecting to site 10.222.4.51
Connecting to site 10.222.4.51
Start downloading from site: http://10.222.4.51:8000/forms/frmservlet?config=tfs
Opening page http://10.222.4.51:8000/forms/frmservlet?config=tfs...
Opening page http://10.222.4.51:8000/forms/frmservlet?config=tfs...
Opening page http://10.222.4.51:8000/forms/frmservlet?config=tfs...
(2 items remaining) Opening page http://10.222.4.51:8000/forms/frmservlet?config=tfs...
Opening http://10.222.4.51:8000/forms/java/frmwebutil.jar
Opening http://10.222.4.51:8000/forms/java/frmall_jinit.jar
Opening http://10.222.4.51:8000/forms/java/frmall_jinit.jar
Opening http://10.222.4.51:8000/forms/java/frmwebutil.jar
Opening http://10.222.4.51:8000/forms/java/frmwebutil.jar
Opening http://10.222.4.51:8000/forms/java/jacob.jar
Opening http://10.222.4.51:8000/forms/java/jacob.jar
Opening http://10.222.4.51:8000/forms/java/tfsbeans.jar
Opening http://10.222.4.51:8000/forms/java/tfsbeans.jar
Opening http://10.222.4.51:8000/forms/java/tfsimage.jar
Opening http://10.222.4.51:8000/forms/java/tfsimage.jar
Opening http://10.222.4.51:8000/forms/java/jai_imageio.jar
Opening http://10.222.4.51:8000/forms/java/jai_imageio.jar
Opening http://10.222.4.51:8000/forms/java/clibwrapper_jiio.jar
Opening http://10.222.4.51:8000/forms/java/clibwrapper_jiio.jar
Opening http://10.222.4.51:8000/forms/java/jacob.jar
Opening http://10.222.4.51:8000/forms/java/jacob.jar
Applet loaded.
Applet initialized.
Applet started.
Opening http://10.222.4.51:8000/forms/java/tfsbeans.jar
Opening http://10.222.4.51:8000/forms/java/tfsbeans.jar
Opening http://10.222.4.51:8000/forms/java/tfsimage.jar
Opening http://10.222.4.51:8000/forms/java/tfsimage.jar
Opening http://10.222.4.51:8000/forms/java/jai_imageio.jar
Opening http://10.222.4.51:8000/forms/java/jai_imageio.jar
Opening http://10.222.4.51:8000/forms/java/clibwrapper_jiio.jar
Opening http://10.222.4.51:8000/forms/java/clibwrapper_jiio.jar
Opening http://10.222.4.51:8000/forms/java/java/awt/KeyboardFocusManager.class
Opening http://10.222.4.51:8000/forms/java/java/awt/KeyboardFocusManager.class
Applet loaded.
Applet initialized.
Opening http://10.222.4.51:8000/forms/java/java/awt/event/MouseWheelListener.class
Opening http://10.222.4.51:8000/forms/java/java/awt/event/MouseWheelListener.class
Opening http://10.222.4.51:8000/forms/java/oracle/forms/registry/Registry.dat
Opening http://10.222.4.51:8000/forms/java/oracle/forms/registry/Registry.dat
Opening http://10.222.4.51:8000/forms/java/oracle/forms/registry/default.dat
Opening http://10.222.4.51:8000/forms/java/oracle/forms/registry/default.dat
Opening http://10.222.4.51:8000/forms/frmservlet?config=tfs&acceptLanguage=en-us,tr;q=0.5&ifcmd=startsession
Opening http://10.222.4.51:8000/forms/frmservlet?config=tfs&acceptLanguage=en-us,tr;q=0.5&ifcmd=startsession
Opening http://10.222.4.51:8000/forms/lservlet;jsessionid=0ade042330d69eb05aec84b344128245ca217665e6c7.e3eNc3iPc3j0ax4LbNeKaxqKci1ynknvrkLOlQzNp65In0?ifcmd=getinfo&ifhost=EDP12PC58&ifip=10.222.12.58
Opening http://10.222.4.51:8000/forms/lservlet;jsessionid=0ade042330d69eb05aec84b344128245ca217665e6c7.e3eNc3iPc3j0ax4LbNeKaxqKci1ynknvrkLOlQzNp65In0?ifcmd=getinfo&ifhost=EDP12PC58&ifip=10.222.12.58
Opening http://10.222.4.51:8000/forms/lservlet;jsessionid=0ade042330d69eb05aec84b344128245ca217665e6c7.e3eNc3iPc3j0ax4LbNeKaxqKci1ynknvrkLOlQzNp65In0
Opening http://10.222.4.51:8000/forms/lservlet;jsessionid=0ade042330d69eb05aec84b344128245ca217665e6c7.e3eNc3iPc3j0ax4LbNeKaxqKci1ynknvrkLOlQzNp65In0
Opening

First off that's what's called a kernel panic and it's the most extreme software problem as the kernel itself is malfunctioning which everything else depends upon.
It's rather easy to resolve, there are usually two causes for it, outdated software or a problem with OS X itself like it lost part of itself somehow on the drive.
So instead of disabling it which you can't as the operating system is basically frozen (not all of it of course) you should just fix it up really quick and all is well.
Depending upon what operating system the machine has gives you different options to #8 Resinstall Just OS X over itself to fix issues in OS X, and with third party "hooks" called kernel extension files (kexts) that some software place into OS X itself.
So you do that here and it won't delete programs or files, but any program with a kext file in OS X is removed by the overwrite process.
So do #8 here and other Steps as you see fit to fix the machine.
..Step by Step to fix your Mac
Of course doing so is going to make some software not work, so you have to check to make sure before you reinstall certain software that it's been updated and works fine with the current OS X verison.

Execute import is in disable status

Similar Messages

Maybe you are looking for