"Execute" is not working in web reports

Friends,
" Execute" link is not working in web my report. And also the selection screen is blank for style sheets. Do you have any idea about the cause?
Joe

Also check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP..

Similar Messages

LOVs not working in Webi Report for SAP BO 4.1 SP 2 Patch 3

Hello ,
I have developed reports and universes in SAP BO 4.0 SP 5 and i have migrated those reports to higher version of BO which is 4.1 SP2 Patch 3.
My universe is working fine with LOVs but when i run the webi report , the LOVs arent working.
have anyone facing the same issue. any idea why the LOVs arent working on higher version.?

Hi Victor,
The List of values we will assign in universe in order to get filtered data works on universe query panel
but the same objects when i am using in report(webi report) , the List of values are not working .i.e
they are not getting displayed in webi report.
for ex: i have country object having country names as LOVs and state objects having state names as LOVs . Now when i select Country value , the LOVs of state objects should get filtered and shows only states which belongs to country .
the above logic is not working in webi report , i am only able to select country and when i go for state, the state names do not get filtered.
please let me know why this is happening in the SP2 patch 3 version and its working fine for SP2 , but the chrome issue gets solved after applying patch 3 and not if we only upgrade to SP2.
the webi reports are not working in chrome browser if we using SAP B04.1 SP2 and lower version
but the LOVs are not working in SAP BO 4.1 SP 2 patch 1, 2,3.
kindly help me with the issue

Execute link is not working in Web report

Friends,
" Execute" link is dead in web my report. And also the selection screen is blank for style sheets. Do you have any idea about the cause?
Joe

Hi,
On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
Regards,
Bhagyarekha.

Change order of key figure is not working in Web report output (using WAD)

Hi,
We are using BI 7.0, release 701 and level 008. We are facing problem in WAD (web report output). When ever we do 'Select filter' for key figures and 'change the order' of key figures, it does not get reflected in new order. Though drag and drop of key figures is working.
Though same change order is working fine in Bex Analyser.
Kindly suggest some inputs.
Thanks.

Hi,
On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
Regards,
Bhagyarekha.

Query level filter not working in Webi report

Hi All,
I am using BOXI R3.1 (SP3), m facing one problem when refreshing Webi report on daily basis. I am using three query level filter as a prompt, but i checked one filter is not working then i need to reapply this filter and rest 2 filter is working fine.
Can anyone suggest me why problem is coming?
Regards,

Hi,
Prompts are interactive, and come from the query panel. Filters are not interactive, and are set on the report or block. There are also input controls, which are interactive filters
1. Select the universe in the list of universes to open the Query Panel.
2. Drag the Year object to the Result Objects pane.
3. Drag the Number of Guests object to the Query Filters pane and create a report filter that restricts Number of Guests to greater than n.
4. Click Combined Query.
The Combined Query pane appears in the bottom left of the Query panel with the two queries joined by UNION.
5. Click on the second query and remove the Year and Number of Guests objects.
6. Drag the Reservation Year object to the Result Objects pane.
7. Drag the Future Guests object to the Query Filters pane and create a report filter that restricts the future guests to greater than n.
8. Click Run Query.
Best Regards
Naveen

Zero Rows suppression is not working in Webi report.

Hello Gurus,
I have created a Web' report on top of BEx query. I am getting the report with Zero values. I want to suppress the rows with Zero values. When I ran the same query in BEx it is suppressing the zeros. (I have the property to suppress the Zero values int he query as active). Why Webi report is not recoginizing the property of the BEx query.
Please advise.
Thanks,
Aruna..

Hello,
I am facing the similar problem...I want to suppress 0 values in my report. I am using RDBMS - BOXI 3.1 SP1 (Reporting through Webi)
I have tried the above mentioned filter at Webi Level, but no luck.
Description       p1       p2       p3
Wages              0         0         0
Exp                   100      25       50
My requirement is the row, with all the columns with 0 should be suppressed.
Appreciate your help.
Thanks,
Anushka
Edited by: Anushka Bidesi on Aug 11, 2010 11:38 AM

Query Filters not working in webi report.

Hi all,
I have a bex query where i have some filters on Key figures but when i run that query on webi report i dont get exact data as in bex...
There are no other filters i have applied in webi, but i am not able to see the exact data..?
what may be the issue....

Thanks for the earliest reply.......
I am using Business object XI 3.1 SP 1 FP 0.882.
In webi i can see all the values i.e I have applied filter on key figure TARGET GI QUANITY which brings only that quantity which has missing parts.
But i get all the quantity in my webi report.
so what can be the issuse....?

Context Menu not working in Web Reports

We are on BI 7.0 (ABAP stack only). I am unable to see context menu for 3.X web reports in 7.0 environment when we have "Only Hierarchy Navigation" property checked in web tenplates (WAD 3.X). Where as in production, on 3.0B system (not upgraded) when we have "Only Hierarchy Navigation" property checked in web template i am able to see context menu on header row of the reports. Not sure what i am missing?
Reposting again to get some attention! Sorry for the duplication.
Appreciate all your insights.
Thanks.

Also check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP..

Join is not working in webi report

I have let's say three tables; one fact and two dimensions;
I manually joined each dimension table with the fact with 1 to many cardinality...
Now I'm trying to run a test report using few fields from each dimension and it doesn't seem to join; in the SQL Viewer in Edit Query mode, it has two queries under Synchronization...it doesn't show a joined query between tables....
I have a similar setup in another universe that is out of the box solution and that seems to work just fine...
Am I missing something here...Please help!

Hi Ahmed,
Along with the context that is present in your universe, check under the parameters the fifth tab i.e. the sql tab.
In this see whether the options are checked or not.
the options :
1.Multiple sql statements for each context.
2.Multiple sql statements for each measure.
Gaurav

Variable exit in sap bi 7.0 is not working in web report

Hi Experts,
I had wrote a variable exit to get latest run date at variable screen for a variable.On the base query i have created query view.This query view is working fine when i am viewing from analyzer but on the web Im not getting latest run date but it taking some other date.
Can any body suggest any thing why system is behaving so strange.
Thanks
Vinod

Hi, Succhi
Note 1621031 - Incorrect status I1054 "To be distributed"
Note 1620893 - Screen output without connection to user - SMQ1
also check program CRM_DATAEXCHANGE_TOOLBOX
Denis

Menu options not working in web reports

Hai,
I made a template in WAD based on a query view. When I publish, none of the options in the menu, that appears when I right click on the characteric object, "Keep filter value, select filter value, remove drill down" etc. allof them doesn't work. When I click on them nothing happens.
When I got to Tools>view definition>based on another query, the data is displayed without my formatting like chart and all but everything works there.
Can someone help me identify whats the problem?
Thank you.

Hi,
In the Web Application Designer, in the Properties area of the web item, you can set the option Objects with navigation links to 'X' in the Web Item tabpage, under General.
Objects with navigation links (GENERATE_LINKS).
X = Yes
= No.
For Table web item there's an option Only hierarchy navigation (ONLY_HIERARCHY_NAVIGATION).
X = Yes
= No
If set to 'X' the context menu is hidden in this mode, and you can only expand and collapse from the list.
Check this option also.
Hope this helps.
Regards
Hari
Message was edited by: Hari Krishnan K

Currency conversion not working in web templates after migration to 7.0

Hi Gurus,
I am experiencing an interesting issue in BI7. I have my web-template reports build on one or two queries. When I execute the queries from RSRT I have all the amounts properly converted to USD (there is a bex variable defined on the query level with USD as default). However, when executed from web-browser the conversions does not work when the report opens. Now, when I open the "cur. translation" option from KF popup menu and choose the same values I chose on the variable screen - everything works fine.
Have you experienced similar issue(s)? Please share your experience and kindly avoid pasting links for documentation - these I have already reviewed and it's pointless.
Thank you, KAT

Hi Nitin,
You may wish to take a look at below for few insights -
OSS notes 328181 and 762951 as a prerequisites.
Failure to follow the instructions in those notes may probably result in data loss.
https://websmp207.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002662832005E
Re: Delta queus during upgrade
Assign points if this is helpful.
Regards,
Anil

What is the right sdk api to work with webi reports in BOXI Release 4?

Hello,
I just read in the omg model for rebean (sdk for working with webi report documents) that all functions to access the report structur and layout are no longer availabe beginning with Release 4.
Can anyone confirm, that this is the case?
Are those functions moved to a different SDK component?
Thanks in advance,
Bernd
Dokumentation about rebean _omd
u2022 The object model shows many funtions , classes in red which means:
Note: The Classes, Interfaces, and Methods marked in red are no longer functional from the SAP
BusinessObjects Business Intelligence Platform 4.0 release onwards.
u2022 Among those functions are all !! We need to analyze the report layout
u2022 No longer supported: DocumentInstance.getDictionary() , DocumentInstance.getOpenDocumentInfo(), DocumentInstance.getResourceManager(), DocumentInstance.getStructure()
u2022 Classes no longer supported: ReportElement, ReportDictionary, Query, QuerySorts, DataSourceObject(s), SQLDataProvider,QueryNode, DPExpression, QueryContainer, Link,
u2022 Classes no longet supported: ReportBody, ReportContainer, ReportStructure, ReportBlock, Graph, *Table
u2022 Classes no longer supported: Cell, PageHeaderFooter

Thank you for the information srrachna !
Well, the point with the report engine sdk is a surprise. What is the sense of new functionality when you cannot use it (spoken for the api processing), and in addition when the new functionality eliminate functionality which was available before in the sdk.
In my view this cut is to hard. The .pdf speaks from deprecated, but the blog and the information in the report engine api speaks a different language. The functionality is not just deprecated but no longer available.
Hope SAP will address that before relase 4 becomes GA in May 2011.

Why is my executable VI not working with a PCI-6259?

I have bought a PCI-6259 which has referencing trigger capability. I wrote a VI for acquiring the data and tested the VI on my PC that has the full developmental LabView 8.2.1 package installed. The trigger is a 1 volt level that is triggered by a potentiometer ranging from 0-5 volts that I control manually. The VI works exactly how I want it to, however, now I want to use the Application Builder to create an executable to distribute the VI to the testing station PC. I then removed the PCI-6259 from the developmental PC and installed it in the testing station PC and loaded the executable VI along with the LabView 8.2.1 Run Time Engine. I open the program and it runs but I cannot get the program to trigger using the same potentiometer so it runs in an infinite loop. I'm pretty sure everything is loaded correctly and the only difference between the two stations is that one has the full developmental LabView package and the other is an executable. Would anyone know why my executable is not working?
Thanks,
Matt Kostyal

Hey Matt,
Thanks for contacting National Instruments support. One thing I'd like to see you try in the DAQ diagnostic utility. I do not suspect a bad card, but it is an executable that we can try that we know was properly built. If it doesn't work that will give us some more insight into the problem if it is truly hardware or software.
Let me know what you find.
Regards,
Kenn North
Senior Product Manager - Search, Product Data
http://ni.com/search

Share calculation Not working in the report

Iam surprised not to ge the simple share calculation not working at my report.
I have a dimension and corresponding values ( measures) .I made a Total at the end of the report. and I want to calcualte share of Total to each corresponding value.
how to do this, any thougts,...
I have used calculated memebers for this, But I wan to make the percentage of the total ( which is calculated inside Tool itself)
Please help....

Prassad,
Not totally sure what you are trying to achieve but there a couple of possible solutions:
1) Total = total of all dimension members. Assuming you only have three dimension members then you should have a fourth member called ALL_DIMS or something similar. In the Share calculation template you need to specify the Total level as the basis for your share calc. This will generate the following result:
                         Revenue % Share
- All Members     600         100%
     A                  100           17%
     B                  200           33%
     C                  300           50%2) The total you are referring to is in fact a sub total and is the result of adding together only the results for A + B + C, i.e. you have hundreds of dimension members but you specifically want to see a total for just these three members. To do this create a new custom aggregate call "My Total" and add together the dimension members A + B + C - Custom Aggs are a new feature to Discoverer OLAP (Checkout Mark Rittman's excellent blog article for more information on this feature: http://www.rittmanmead.com/2006/11/13/checking-out-the-new-discoverer-101220-features/)
Then in the Share calculation wizard set the basis for your index using the last option in the list "Specific Dimension Member" and select your new custom aggregate member.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

"Execute" is not working in web reports

Similar Messages

Maybe you are looking for