Execute os command w/sql

Is there any way to execute an arbitrary os command (e.g., grep, etc.) and pipe its output into a SQL statement?
e.g., UPDATE table SET column = `grep ....`;

Thanks, Chris.
We have a bit of a catch-22 here, since we're creating a sequence based on the contents of a table, and we want both the table and the sequence to be replicated via Cache Connect. We load the table, do a select and use the output of the select to create the sequence. The create sequence fails if the cache group exists, but if the cache group doesn't exist, then the table doesn't get replicated. There is no alter sequence command...
Yes, we could load the table, do the select, save the result, truncate the table, create the cache group with the sequence, and then re-load the table, but that seems like a bit more trouble than its worth. Was hoping we could do something with the raw files before they were loaded directly from the ddl. Oh, well....

Similar Messages

ERRORs executing CWM commands in SQL Plus

Hi,
I tried to execute following command in SQL Plus:
execute cwm_olap_dimension.set_plural_name('olapdata', 'OLAP_APARAT_DIM', 'OLAP_APARAT_DIM');
And in response I got following result:
BEGIN cwm_olap_dimension.set_plural_name('olapdata', 'OLAP_APARAT_DIM', 'OLAP_APARAT_DIM'); END;
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "OLAPSYS.CWM$UTIL", line 535
ORA-06512: at "OLAPSYS.CWM$OLAP$DIMENSION", line 17
ORA-06512: at line 1
Can anyone explane me what am i doing wrong ?
I would really appreciate any help!
Thanks

check SQL*Plus user's guide
e.g column REMARK format a30
set linesize 2243
etc etc etc

Executing OS command from sql procedure

i want to execute an OS command from the procedure, can i do this way? looks like it is not executing the command move....
declare
begin
dbms_output.put_line(' moving...');
host;
move c:\file1\test.txt C:\moved
exit;
/

True. But that job is going to run in a separate session, some time after the current transaction commits (depending on the number of jobs queued up to run). So if you need to pass information back from the job, or you want the procedure to handle exceptions thrown by the job, or you want to tie job related failures back to a particular application level event, or you want the rest of your procedure to wait for the operating system command to finish, using the DBMS_SCHEDULER for this sort of thing is going to require a fair amount of additional coordination/ monitoring/ infrastructure code. It's certainly not a Herculean task to write that additional code, and it's reasonable in some situations, but the Java stored procedure approach strikes me as substantially easier to deal with in most cases.
Justin

Execute EXP command in SQL or PL/SQL window

Hi,
Sorry
Regards
Sanjit
Edited by: userSanjit on Jun 2, 2009 2:47 PM

You cannot use exp or imp commands from PL/SQL.
Why don't you use [DATA Pump|http://www.oracle-base.com/articles/10g/OracleDataPump10g.php]? If you are using 10g then you can easily incorporated that in your environment.
Regards.
Satyaki De.

BAM Deployment error - Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. --- Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "ServerName".

HI,
I am getting below error while deploying BAM activity ...Pls help me resolve this issue.
Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. ---> Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server
"ServerName". ---> System.Data.SqlClient.SqlException: An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or
[] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed.
Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias
to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An
object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column
name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing
or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For
SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements,
verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column
has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For
other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements,
look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock,
Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at
System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean
sendToPipe, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteBatches(String cmdText) at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String
cmdText, CommandType cmdType, Boolean inTransaction, Transaction transaction) --- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String cmdText, CommandType cmdType, Boolean inTransaction,
Transaction transaction) at Microsoft.BizTalk.Bam.Management.ViewModule.Create(XmlDocument defXmlDoc) at Microsoft.BizTalk.Bam.Management.WorkerModule.DispatchOperation(OperationType operation, XmlDocument defXmlDoc) at
Microsoft.BizTalk.Bam.Management.BamManager.ProcessOneBamArtifactType(BamArtifactType bamArtifact, OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.ManageInfrastructure(OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.Deploy()
--- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.BamManager.Deploy() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.HandleDeployAll() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.DispatchCommand()
at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Run() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Main(String[] args)

Your View Name, OLAP Cube Name and certain other restrictions listed @http://msdn.microsoft.com/en-us/library/aa561577.aspx
Please review your BAM Definitons.
Regards.

Error while executing jdbc commands but getting connection pool

I was not able to make a simple oracle connection and that hurts me.
The program(jsp) is...
<%@ page language="java" import="java.sql.*,java.io.*,
java.util.*,pac1.*,javax.naming.*,javax.sql.*"%>
<html>
<body>
<%
Context ctx= new InitialContext();
DataSource dsindogulf1=(DataSource)ctx.lookup("jnindogulf1");
Connection conn=dsindogulf1.getConnection();
if(conn!=null)
System.out.println(conn.toString());
else
System.out.println("sorry");
Statement st=conn.createStatement();
String string1="CREATE TABLE Authorr(col1 CHAR(10));";
st.executeUpdate(string1);
%>
</body>
</html>
If i delete the
st.executeUpdate(string1); then there is no problem I get the connection pool. That means i am getting the connection. But when i include the
st.executeUpdate(string1); there is an error which i cannot understand.. the error is
Error 500--Internal Server Error
java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-00911: invalid character
     at weblogic.jdbc.base.BaseExceptions.createException(Ljava.lang.String;Ljava.lang.String;I)Ljava.sql.SQLException;(Unknown Source)
     at weblogic.jdbc.base.BaseExceptions.getException(I[Ljava.lang.String;Ljava.lang.String;I)Ljava.sql.SQLException;(Unknown Source)
     at weblogic.jdbc.oracle.OracleImplStatement.execute()V(Optimized Method)
     at weblogic.jdbc.base.BaseStatement.commonExecute()V(Optimized Method)
     at weblogic.jdbc.base.BaseStatement.executeUpdateInternal()I(Unknown Source)
     at weblogic.jdbc.base.BaseStatement.executeUpdate(Ljava.lang.String;)I(Unknown Source)
     at weblogic.jdbc.wrapper.Statement.executeUpdate(Ljava.lang.String;)I(Statement.java:360)
     at jsp_servlet.__test._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(__test.java:149)
     at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(Optimized Method)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(Optimized Method)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(Optimized Method)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(Optimized Method)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run()Ljava.lang.Object;(WebAppServletContext.java:6452)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic.security.subject.AbstractSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(Optimized Method)
     at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(Lweblogic.servlet.internal.ServletRequestImpl;Lweblogic.servlet.internal.ServletResponseImpl;)V(WebAppServletContext.java:3661)
     at weblogic.servlet.internal.ServletRequestImpl.execute(Lweblogic.kernel.ExecuteThread;)V(ServletRequestImpl.java:2630)
     at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(ExecuteThread.java:219)
     at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178)
     at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
the steps which i have followed are... I have made a connection pool using weblogic type 4 driver in the administrative console... then i have created the data source using jndi name jnindogulf1..... but although i am getting the connection pool i am receiving error ehice executing jdbc commands
please help
thanks

babuli nayak wrote:
I was not able to make a simple oracle connection and that hurts me.
The program(jsp) is...
<%@ page language="java" import="java.sql.*,java.io.*,
java.util.*,pac1.*,javax.naming.*,javax.sql.*"%>
<html>
<body>
<%
Context ctx= new InitialContext();
DataSource dsindogulf1=(DataSource)ctx.lookup("jnindogulf1");
Connection conn=dsindogulf1.getConnection();
if(conn!=null)
System.out.println(conn.toString());
else
System.out.println("sorry");
Statement st=conn.createStatement();
String string1="CREATE TABLE Authorr(col1 CHAR(10));";
st.executeUpdate(string1);
%>
</body>
</html>
If i delete the
st.executeUpdate(string1); then there is no problem I get the connection pool. That means i am getting the connection. But when i include the
st.executeUpdate(string1); there is an error which i cannot understand.. the error is
Error 500--Internal Server Error
java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-00911: invalid character
     at weblogic.jdbc.base.BaseExceptions.createException(Ljava.lang.String;Ljava.lang.String;I)Ljava.sql.SQLException;(Unknown Source)
     at weblogic.jdbc.base.BaseExceptions.getException(I[Ljava.lang.String;Ljava.lang.String;I)Ljava.sql.SQLException;(Unknown Source)
     at weblogic.jdbc.oracle.OracleImplStatement.execute()V(Optimized Method)
     at weblogic.jdbc.base.BaseStatement.commonExecute()V(Optimized Method)
     at weblogic.jdbc.base.BaseStatement.executeUpdateInternal()I(Unknown Source)
     at weblogic.jdbc.base.BaseStatement.executeUpdate(Ljava.lang.String;)I(Unknown Source)
     at weblogic.jdbc.wrapper.Statement.executeUpdate(Ljava.lang.String;)I(Statement.java:360)
     at jsp_servlet.__test._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(__test.java:149)
     at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(Optimized Method)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(Optimized Method)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(Optimized Method)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(Optimized Method)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run()Ljava.lang.Object;(WebAppServletContext.java:6452)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic.security.subject.AbstractSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(Optimized Method)
     at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(Lweblogic.servlet.internal.ServletRequestImpl;Lweblogic.servlet.internal.ServletResponseImpl;)V(WebAppServletContext.java:3661)
     at weblogic.servlet.internal.ServletRequestImpl.execute(Lweblogic.kernel.ExecuteThread;)V(ServletRequestImpl.java:2630)
     at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(ExecuteThread.java:219)
     at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178)
     at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
the steps which i have followed are... I have made a connection pool using weblogic type 4 driver in the administrative console... then i have created the data source using jndi name jnindogulf1..... but although i am getting the connection pool i am receiving error ehice executing jdbc commands
please help
thanks
Hi. Remove the semicolon from your SQL string:     stmt.executeUpdate("CREATE TABLE Authorr(col1 CHAR(10))");Joe

How to execute unix command through odi and store the result in table

I have to reconcile if data is loaded in table from csv file or not . I have to create a oracle data integrator package/interface/procedure to execute unix command to count number of rows in the csv files and store the count result in a table then i have to query the loaded table and count number of rows there and store in the table and have to compare is counts are same or not, Please assist me how to make package/interface/procedure to execute unix command and store result in oracle table.
Thanks in Advance

Use ODI OS command tool in the ODI package.
create an interface in ODI using LKM File to Sql and the output file generated with the csv file's row count as a source and the db table(where the count needs to be stored) as a target

AddVMOption command in SQL developer configuration files

Greetings developers,
I'm a newbie in database and Java world trying to understand what the Oracle sql developer configuration files do by executing AddVMOption commands. I'm guessing this command is something to do with Jdeveloper. Please enlighten me what the command does.
Regards,
Valerie

Valerie,
Nothing to do with JDeveloper at all.
SQL Developer (and JDeveloper incidentally) are created using Java - the AddVMOption's that you are referring to are arguments passed to the Java Virtual Machine that is used to run SQL Developer. For example, you can use AddVMOption to give more memory to SQL Developer.
Hope this clarifies,
John

Xcopy Command From Sql

Dear Guru's,
I have Script of my all the procedure.
After all procedure gets execute, As a output it create .csv files.
This .csv files i manually copy past on one of my directory.
For avoiding this manual copy past i want to use xcopy command from sql itself.
Please guide me how do i do this.
Regards,
Chanchal wankhade.

CHACHA wrote:
I have Script of my all the procedure.
After all procedure gets execute, As a output it create .csv files.
This .csv files i manually copy past on one of my directory.
For avoiding this manual copy past i want to use xcopy command from sql itself.
Please guide me how do i do this.Do not like the sound of the architecture you are using for this. Scripts? Scripts for Oracle should be limited to installing s/w.
Writing any kind of Oracle application using scripts, is questionable ito design, robustness, flexibility, security and so on.
Wanting to use console commands from a SQL cursor? That sounds even more broken and wrong. If you want to do o/s calls, it should be done carefully and securely from PL/SQL code.
And PL/SQL code should be inside the database - not outside in some script.
As for copying files. Realise that SQL and PL/SQL code executes on the server inside an Oracle server process. This does not have access to your client's file system and directories.

Execute Process Task :Executing DOS Command lines in Execute Process Task

Hi All,
I am trying to sftp files using Tectia Client from my local system. For that I have used the Execute Process Task in SSIS. First I open DOS command and try to instantiate the sftp3.exe.
Then I write down the below command
binary
open username@hostname
lcd C:\Test
cd <Destination Path name>
put test.txt
How to execute the command in execute process task ?
help is appreciated
Thanks

Hi ConnectDebz,
According to your description and script example, do you use WinSCP.exe to perform the SFTP files transfer? If so, you should set the Executable of the Execute Process Task to the path of the WinSCP.exe, save the script in a .txt file and set the Argument
of the Execute Process Task like “/script=C:\Temp\sftploader.txt” (without quotes).
References:
http://www.sqlservergeeks.com/blogs/raunak.jhawar/sql-server-bi/395/sql-server-sftp-with-ssis-execute-process-task
http://gregcaporale.wordpress.com/2012/02/23/using-sftp-in-sql-server-ssis/
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Put the query result of "EXECUTE IMMEDIATE" command in a local table

Hi all.
Is it possible to put the output of the "EXECUTE IMMEDIATE" command in a local table so that the ouput can be accessed through other procedures.
Regards,
Andila

Hi Andila, well you could just make your dynamic sql statement an insert statement based on your select. See example below
create column table test_table_1
"COL1" nvarchar(10),
"COL2" nvarchar(10)
CREATE PROCEDURE INSERT_P()
LANGUAGE SQLSCRIPT AS
sql_string NVARCHAR(2000) := '';
BEGIN
sql_string := 'insert into test_table_1 (select ''val1'', ''val2'' from dummy) ';
EXECUTE IMMEDIATE (:sql_string);
END;
call insert_p();
select * from test_table_1;
However you may want to investigate other options instead of using dynamic SQL as this is not a recommended approach. Less optimized compared to standard sql.
Peter

How execute external command .sh in WorkFlow process?

Hi, i need execute a command, for example, <nombre>.sh with 3 parameters in a WF process.
This script .sh has command for execute ftp.
How can i do?
Thanks.

Hi,
You need to wrap the call in either PL/SQL or Java and invoke that from a standard Workflow function API.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Enterprise server not properly executing parameterized command

I developed a report in CR XI with a subreport whose command sql expression DB name comes from a command parameter linked from the main report. It works fine when I run it on my desktop, but when run from the server(Business Objects Enterprise XI, Release 2) if returns no records. If I use gouping it runs fine on my desktop, but I get "Invalid Group condition" if I try to run it on the server.
MainReport.AOIID=Subreport.AOIID
Select ....
From AOIID{?AOIID}.TOC....
where ....
It's as if the server is trying execute the command before executing BUT I'm not so sure about that either becuse the following command works fine, even on the server:
MainReport.TOCID=Subreport.CID
Select ....
From AOIID3003.TOC....
where CID={?CID}

Hi Ben,
The reports you are using are linked subreports or unlinked subreports?
What is the exact version of CR XI R2 you are using (Go to Help menu > About Crystal Reports) ?
Regards,
Abhijeet T.

Issue with Executing OS commands from Stored Procedure

I am trying to execute the scripts provided at :
http://github.com/xtender/XT_SHELL
provided by xtender user.
As required, I have asked my DBAs to grant privileges by executing the following scripts:
Begin
--change to needed permissions and execute
dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/factiva/ODS/bin/CVIM_Rpt_ExportCSVFile’, 'read,write,execute' );
end;
/where CVIM_Rpt_ExportCSVFile is my script residing in the Unix server where my Oracle is installed.
The error I am facing when I try to execute the following command is:
select * from table(xt_shell.shell_exec('/var/scripts/CVIM_Rpt_ExportCSVFile',100))
Exception:the Permission (java.io.FilePermission /var/scripts/CVIM_Rpt_ExportCSVFile execute) has not been granted to ODS. The PL/SQL to grant this is dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/scripts/CVIM_Rpt_ExportCSVFile', 'execute' )I have asked my DBA to also execute the following scripts: - But I still see the same error as above. I am not able to figure out whats going on. Can anyone pls help me out??
EXEC Dbms_Java.Grant_Permission('ODS', 'SYS:java.lang.RuntimePermission', 'writeFileDescriptor', '');
EXEC Dbms_Java.Grant_Permission(ODS', 'SYS:java.lang.RuntimePermission', 'readFileDescriptor', '');
dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/scripts/CVIM_Rpt_ExportCSVFile', 'execute' )

DUPLICATE
===============================================================
Issue with Executing OS commands from Stored Procedure
==============================================================

Using Powershell to execute DBCC CheckDB from SQL Agent.

So, I have a weird situation that I think is tied tot he resource group and powershell, but I am having trouble determining if it is that or not. I run DBCC CheckDB using a resource pool and a secondary account. The account has permissions to do the work
and if I log onto the server and run the procedure locally it runs fine in the resource pool configuration. However, when I kick it from the SQL Agent job using the powershell step, it only does checkDB on the first 3 system databases and then stops once it
hits a user database. I am not seeing any errors or messages, it just stops. I ran profiler and I see it do the work, get to the first user database, issues this statement from DBCC, then just stops, and the job ends.
SELECT @BlobEater = CheckIndex (ROWSET_COLUMN_FACT_BLOB)
FROM { IRowset 0xD0936A7902000000 }
GROUP BY ROWSET_COLUMN_FACT_KEY
>> WITH ORDER BY
  ROWSET_COLUMN_FACT_KEY,
  ROWSET_COLUMN_SLOT_ID,
  ROWSET_COLUMN_COMBINED_ID,
  ROWSET_COLUMN_FACT_BLOB
OPTION (ORDER GROUP)
I am not doing anything special in my code that would limit which databases to process. As I said earlier, executing the call to the procedure from a query window runs as expected and processes all of the databases.
Here is the Agent Code calling powershell:
[string] $DayOfWeek = ""
$DayOfWeek = (get-date).DayOfWeek.ToString()
$DayOfWeek
if ($DayOfWeek -eq 'Sunday')
invoke-sqlcmd -database sysadm -serverinstance HQIOSQLDEV01\DEV01 "exec ConsistencyCheck.upConsistencyCheck NULL, 'N', 'Y', 'N', 'N', 'N'"
else
invoke-sqlcmd -database sysadm -serverinstance HQIOSQLDEV01\DEV01 "exec ConsistencyCheck.upConsistencyCheck NULL, 'Y', 'N', 'N', 'N', 'N'"
John M. Couch

There are 3 additional databases. The last known good is today as I am able to execute the procedure via query window just fine. It is only when executed from a SQL Agent job as above that it stops after only doing the System Databases. The largest database
is 130GB in size, with the largest table being 62 GB.
-- Create Procedures
raiserror('Creating Procedure ''%s''', 0, 1, '[ConsistencyCheck].[upConsistencyCheck]')
go
/*==============================================================================
Procedure: upConsistencyCheck
Schema: ConsistencyCheck
Database: SysAdm
Owner: dbo
Application: dbo
Inputs: Catalogue : nvarchar(128) : NULL = All Databases
Physical Only : nchar(1) : Y/N, NULL = N
Data Purity : nchar(1) : Y/N, NULL = N
No Index : nchar(1) : Y/N, NULL = N
Extended Logical Checks : nchar(1) : Y/N, NULL = N
Table Lock : nchar(1) : Y/N, NULL = N
Outputs: (0 = Success, !=0 = failure)
Result Set: N/A
Usage: declare @ii_Rc int
,@invc_Catalogue nvarchar(128)
,@inc_PhysicalOnly nchar(1)
,@inc_DataPurity nchar(1)
,@inc_NoIndex nchar(1)
,@inc_ExtendedLogicalChecks nchar(1)
,@inc_TabLock nchar(1)
select @invc_Catalogue = NULL
,@inc_PhysicalOnly = 'Y'
,@inc_DataPurity = 'N'
,@inc_NoIndex = 'N'
,@inc_ExtendedLogicalChecks = 'N'
,@inc_TabLock = 'N'
exec @ii_Rc = ConsistencyCheck.upConsistencyCheck @invc_Catalogue
, @inc_PhysicalOnly
, @inc_DataPurity
, @inc_NoIndex
, @inc_ExtendedLogicalChecks
, @inc_TabLock
print 'Return Code: ' + convert(varchar, @ii_Rc)
Description: This Procedure is used to run DBCC CheckDB on 1 or all Databases
on the existing instance.
Version: 1.00.00
Compatability: SQL Server 2008 (100)
Created By: John M. Couch
Created On: 04-26-2012
================================================================================
Notes
1. Some logic was taken directly from Ola Hallengren's Maintenance Script.
http://ola.hallengren.com
================================================================================
History: (Format)
When Who Version Code Tag What
04-26-2012 John Couch 1.00.00 (None) Initial Revision
==============================================================================*/
alter procedure ConsistencyCheck.upConsistencyCheck (@invc_Catalogue nvarchar(128)
,@inc_PhysicalOnly nchar(1)
,@inc_DataPurity nchar(1)
,@inc_NoIndex nchar(1)
,@inc_ExtendedLogicalChecks nchar(1)
,@inc_TabLock nchar(1)) as
/*==============================================================================
Variable Declarations & Temporary Tables
==============================================================================*/
declare @li_Rc int = 0
,@lnvc_ExecutedBy nvarchar(128) = user_name()
,@ldt_ExecutedOn datetime = getdate()
,@lnvc_Catalogue nvarchar(128) = @invc_Catalogue
,@lnc_PhysicalOnly nchar(1) = coalesce(@inc_PhysicalOnly, 'N')
,@lnc_DataPurity nchar(1) = coalesce(@inc_DataPurity, 'N')
,@lnc_NoIndex nchar(1) = coalesce(@inc_NoIndex, 'N')
,@lnc_ExtendedLogicalChecks nchar(1) = coalesce(@inc_ExtendedLogicalChecks, 'N')
,@lnc_TabLock nchar(1) = coalesce(@inc_TabLock, 'N')
,@lnvc_Instance nvarchar(128) = cast(serverproperty('ServerName') as nvarchar)
,@lnvc_Version nvarchar(40) = cast(serverproperty('ProductVersion') as nvarchar)
,@lnvc_Edition nvarchar(40) = cast(serverproperty('Edition') as nvarchar)
,@li_Compatibility int
,@ldt_CreateDate datetime
,@lnvc_UserAccess nvarchar(35)
,@lnvc_StateDescription nvarchar(35)
,@lnvc_PageVerifyOption nvarchar(35)
,@lti_IsReadOnly tinyint
,@lti_IsInStandBy tinyint
,@lnvc_Recipients nvarchar(2000) = '[email protected]'
,@lnvc_Subject nvarchar(128)
,@lnvc_ErrorMessage nvarchar(4000)
,@lnvc_SQL nvarchar(max)
,@lnvc_ManualSQL nvarchar(max)
,@lnvc_Query nvarchar(2048)
,@li_ConsistencyCheckID int
,@ldt_ExecutionStart datetime
,@ldt_ExecutionFinish datetime
declare @ltbl_Catalogue table (Catalogue sysname
,CompatibilityLevel int
,CreateDate datetime
,UserAccess nvarchar(35) -- MULTI_USER, SINGLE_USER, RESTRICTED_USER
,StateDescription nvarchar(35) -- ONLINE, RESTORING, RECOVERING, RECOVERY_PENDING, SUSPECT, EMERGENCY, OFFLINE
,PageVerifyOption nvarchar(35) -- NONE, TORN_PAGE_DETECTION, CHECKSUM
,IsReadOnly tinyint
,IsInStandBy tinyint
,IsAutoShrink tinyint
,IsAutoClose tinyint
,Flag bit default 0)
create table #ltbl_Output (Error int,
Level int,
State int,
MessageText nvarchar(max),
RepairLevel nvarchar(30),
Status int,
DBID smallint,
ObjectID int,
IndexID smallint,
PartitionID bigint,
AllocunitID bigint,
[File] int,
Page int,
Slot int,
RefFile int,
RefPage int,
RefSlot int,
Allocation int)
/*==============================================================================
Initialize Environment
==============================================================================*/
set nocount on
set quoted_identifier on
/*==============================================================================
Parameter Validation
==============================================================================*/
-- Configure Alert Mail Subject Line
set @lnvc_Subject = 'Check consistency parameter validation error occurred on ' + cast(@@servername as nvarchar)
if @lnc_PhysicalOnly not in ('Y','N')
begin
set @lnvc_ErrorMessage = N'The value for parameter @inc_PhysicalOnly is not supported.' + char(13) + char(10) + ' '
set @li_Rc = -1
end
if @lnc_DataPurity not in ('Y','N') and @li_Rc = 0
begin
set @lnvc_ErrorMessage = N'The value for parameter @inc_DataPurity is not supported.' + char(13) + char(10) + ' '
set @li_Rc = -1
end
if @lnc_NoIndex not in ('Y','N') and @li_Rc = 0
begin
set @lnvc_ErrorMessage = N'The value for parameter @inc_NoIndex is not supported.' + char(13) + char(10) + ' '
set @li_Rc = -1
end
if @lnc_ExtendedLogicalChecks not in ('Y','N') and @li_Rc = 0
begin
set @lnvc_ErrorMessage = N'The value for parameter @inc_ExtendedLogicalChecks is not supported.' + char(13) + char(10) + ' '
set @li_Rc = -1
end
if @lnc_TabLock not in ('Y','N') and @li_Rc = 0
begin
set @lnvc_ErrorMessage = N'The value for parameter @inc_TabLock is not supported.' + char(13) + char(10) + ' '
set @li_Rc = -1
end
if @lnc_ExtendedLogicalChecks = 'Y' and @lnc_PhysicalOnly = 'Y' and @li_Rc = 0
begin
set @lnvc_ErrorMessage = N'Extended Logical Checks and Physical Only cannot be used together.' + char(13) + char(10) + ' '
set @li_Rc = -1
end
if @lnc_DataPurity = 'Y' and @lnc_PhysicalOnly = 'Y' and @li_Rc = 0
begin
set @lnvc_ErrorMessage = N'Physical Only and Data Purity cannot be used together.' + char(13) + char(10) + ' '
set @li_Rc = -1
end
if @li_Rc != 0
goto errlog
/*==============================================================================
Code Section
==============================================================================*/
select @lnvc_SQL = N'select d.name, d.compatibility_level, d.create_date, d.user_access_desc, d.state_desc,
d.page_verify_option_desc, cast(d.is_in_standby as tinyint), cast(d.is_read_only as tinyint),
cast(databasepropertyex(quotename(d.name), ''IsAutoShrink'') as tinyint),
cast(databasepropertyex(quotename(d.name), ''IsAutoClose'') as tinyint),
0
from master.sys.databases d
where d.name = ' + case when isnull(@lnvc_Catalogue, '') = '' then ' d.name'
else '''' + @lnvc_Catalogue + ''''
end + '
and d.name != ''tempdb'''
insert into @ltbl_Catalogue (Catalogue, CompatibilityLevel, CreateDate, UserAccess,
StateDescription, PageVerifyOption, IsReadOnly, IsInStandBy,
IsAutoShrink, IsAutoClose, Flag)
exec sp_executesql @lnvc_SQL
while (select top 1 1
from @ltbl_Catalogue c
where c.Flag = 0) = 1
begin
select top 1 @lnvc_Catalogue = c.Catalogue
,@li_Compatibility = c.CompatibilityLevel
,@ldt_CreateDate = c.CreateDate
,@lnvc_UserAccess = c.UserAccess
,@lnvc_StateDescription = c.StateDescription
,@lnvc_PageVerifyOption = c.PageVerifyOption
,@lti_IsReadOnly = c.IsReadOnly
,@lti_IsInStandBy = c.IsInStandBy
from @ltbl_Catalogue c
where c.Flag = 0
select top 1 @lnvc_Catalogue
,@li_Compatibility
,@ldt_CreateDate
,@lnvc_UserAccess
,@lnvc_StateDescription
,@lnvc_PageVerifyOption
,@lti_IsReadOnly
,@lti_IsInStandBy
if @lnvc_StateDescription = 'ONLINE' and @lnvc_UserAccess != 'SINGLE_USER'
begin
-- Build Execution String
select @lnvc_SQL = N'dbcc checkdb (' + quotename(@lnvc_Catalogue) + ')' + case when @lnc_NoIndex = 'Y' then ', noindex'
else ''
end + ' with tableresults, no_infomsgs, all_errormsgs '
+ case when @lnc_PhysicalOnly = 'Y' then ', physical_only'
else ''
end
+ case when @lnc_DataPurity = 'Y' then ', data_purity'
else ''
end
-- Option not supported with Compatibility < 100 (SQL Server 2005 and below)
+ case when @lnc_ExtendedLogicalChecks = 'Y' then
case when @li_Compatibility = 100 then ', extended_logical_checks'
else ''
end
else ''
end
+ case when @lnc_TabLock = 'Y' then ', tablock'
else ''
end
-- Prepare Processing Environment
truncate table #ltbl_Output
set @ldt_ExecutionFinish = null
set @ldt_ExecutionStart = null
-- Capture Start Time.
set @ldt_ExecutionStart = getdate()
-- Execute the Command.
insert into #ltbl_Output(Error, Level, State, MessageText, RepairLevel, Status,
DBID, ObjectID, IndexID, PartitionID, AllocunitID,
[File], Page, Slot, RefFile, RefPage, RefSlot, Allocation)
exec sp_executesql @lnvc_SQL
-- Capture Completion Time.
set @ldt_ExecutionFinish = getdate()
-- Add Header Record to Confirm Execution.
insert into SysAdm.ConsistencyCheck.ExecutionLog(Instance, [Version], Edition, Catalogue, PhysicalOnly,
NoIndex, ExtendedLogicalChecks, DataPurity, [TabLock],
Command, ExecutionStart, ExecutionFinish,
CreatedOn, CreatedBy)
values(@lnvc_Instance, @lnvc_Version, @lnvc_Edition, @lnvc_Catalogue, @lnc_PhysicalOnly,
@lnc_NoIndex, @lnc_ExtendedLogicalChecks, @lnc_DataPurity, @lnc_TabLock,
@lnvc_SQL, @ldt_ExecutionStart, @ldt_ExecutionFinish,
@ldt_ExecutedOn, @lnvc_ExecutedBy)
-- Capture Header Record ID
select @li_ConsistencyCheckID = @@IDENTITY
-- Were there errors?
if (select top 1 1
from #ltbl_Output t) = 1
begin
select @li_ConsistencyCheckID, t.Error, t.Level, t.State, t.MessageText, t.RepairLevel,
t.Status, t.ObjectID, t.IndexID, t.PartitionID, t.AllocunitID, t.[File], t.Page,
t.Slot, t.RefFile, t.RefPage, t.RefSlot, t.Allocation, @ldt_ExecutedOn, @lnvc_ExecutedBy
from #ltbl_Output t
-- Log Failure Entries
insert into SysAdm.ConsistencyCheck.ErrorLog (ExecutionLogID, Error, Severity, [State]
,ErrorMessage, RepairLevel, [Status], ObjectID
,IndexID, PartitionID, AllocationUnitID, FileID
,Page, Slot, RefFileID, RefPage, RefSlot, Allocation
,CreatedOn, CreatedBy)
select @li_ConsistencyCheckID, t.Error, t.Level, t.State, t.MessageText, t.RepairLevel,
t.Status, t.ObjectID, t.IndexID, t.PartitionID, t.AllocunitID, t.[File], t.Page,
t.Slot, t.RefFile, t.RefPage, t.RefSlot, t.Allocation, @ldt_ExecutedOn, @lnvc_ExecutedBy
from #ltbl_Output t
-- Configure Alert Mail Subject Line
set @lnvc_Subject = 'Consistency Check failure for Database ' + quotename(@lnvc_Catalogue) + ' on Instance ' + quotename(@lnvc_Instance) + ' !'
set @lnvc_ErrorMessage = 'To view more details, logon to the Instance and execute the query: ' +
+ char(13) + char(10) + char(13) + char(10) +
'select * from sysadm.consistencycheck.ErrorLog where ExecutionLogID = ' + cast(@li_ConsistencyCheckID as varchar) + ''
+ char(13) + char(10) + char(13) + char(10) +
'Consistency Check Output: ' +
+ char(13) + char(10)
select @lnvc_SQL = N'set nocount on;select ltrim(rtrim(ErrorMessage)) as Message
from SysAdm.ConsistencyCheck.ErrorLog r
where r.ExecutionLogID = ''' + cast(@li_ConsistencyCheckID as nvarchar(128)) + ''''
exec msdb.dbo.sp_send_dbmail @profile_name = 'SQL Mailbox',
@recipients = @lnvc_Recipients,
@subject = @lnvc_Subject,
@body = @lnvc_ErrorMessage,
@query = @lnvc_SQL,
@execute_query_database = @lnvc_Catalogue,
@query_result_header = 1,
@query_result_width = 32767,
@query_no_truncate = 1,
@body_format = 'TEXT',
@importance = 'High'
end
end
else
begin
-- If we get here, then the database was not processed due to it having a status other than ONLINE, being in SINGLE_USER mode or
-- having a compatability level < 100
set @lnvc_Subject = 'Unable to perform consistency checks for Database ' + quotename(@lnvc_Catalogue) + ' on ' + quotename(@lnvc_Instance) + '!'
set @lnvc_ErrorMessage = 'One of the following conditions was not met. ' + CHAR(13) + CHAR(10) + CHAR(13) + CHAR(10) +
'* Database must be ONLINE. It''s current state is: ' + @lnvc_StateDescription + CHAR(13) + CHAR(10) +
'* Database access level cannot be set to SINGLE_USER. It''s current access level is: ' + @lnvc_UserAccess
exec msdb.dbo.sp_send_dbmail @profile_name = 'SQL Mailbox',
@recipients = @lnvc_Recipients,
@subject = @lnvc_Subject,
@body = @lnvc_ErrorMessage,
@body_format = 'TEXT',
@importance = 'High'
end
update t
set Flag = 1
from @ltbl_Catalogue t
where t.Catalogue = @lnvc_Catalogue
end
/*==============================================================================
Cleanup Temp Tables
==============================================================================*/
cleanup:
if object_id('tempdb..#ltbl_Output') is not null
drop table #ltbl_Output
/*==============================================================================
Exit Procedure
==============================================================================*/
quit:
return @li_Rc
/*==============================================================================
Error Processing
==============================================================================*/
errlog:
-- Raise Error, and write to Application Event Log
raiserror (@lnvc_ErrorMessage, 16, 1) with log, nowait
-- Send Email Notification of Error
exec msdb.dbo.sp_send_dbmail @profile_name = 'Mailbox',
@recipients = @lnvc_Recipients,
@subject = @lnvc_Subject,
@body = @lnvc_ErrorMessage,
@importance = 'High'
goto cleanup
go
John M. Couch

Execute os command w/sql

Similar Messages

Maybe you are looking for