Execute Process Task Error - Powershell script
I've got a powershell script that is executed through a Execute Process Task that is giving me an error when executed through the Execute Package Utility on a 64bit server.
"c:\windows\system32\windowspowershell\v1.0\powershell.exe" ""& 'C:\CubeArchive\Linked DB to XMLA.ps1'"" at "", The process exit code was "1" while the expected was "0".
Here's the rub:
It runs fine from Visual Studio on that server.
On my local maching (32bit), it runs fine from both Visual Studio and Execute package Utility.
Does anyone have any idea why this is happening?
Thanks,
Jason
Ok - found the problem.
This is the first time that I'm using powershell.
I had set the ExecutionPolicy on that machine to unrestricted from the powershell console beforehand.
But unknown to me, this setting was only applicable to the 32 bit environment.
I set the 64 bit environment to unrestricted and it worked. (I added another Execution Process Task to the package to set this before hand - I only did this once and now can remove it.)
I thought that the setting for powershell would be server wide, I didn't know that there was a distinction of the 32 bit and 64 bit environments.
Thanks,
Jason
Similar Messages
-
Ssis execute process task error: process exit code was 1 while the expected was 0
Hi Sir,
in my SSIS Package(2012) i am using Execute Process Task which will call bat file. bat file is located on UNC Path.i am having the below script in the batch file.
del \\servername\foldername\name.txt
rcmd \\servername D:\name1.bat
del \\servername\foldername\name2.txt
xcopy \\servername\foldername\file.txt \\server\foldername\outfilefolder
i am getting the below error message:
ssis execute process task error: process exit code was 1 while the expected was 0
i want know at what cases error exit code was 1?
Thanks for your time.Hi prasad.alm,
The error is generic and can be caused by various factors. Here are some suggestions for your reference:
Manually run the executable to execute the batch file so that we can check whether the command lines in the batch file are correct or not.
Check there are no duplicate/existing files in the destination folder.
Try to run the package in 32-bit or 64-bit runtime mode.
If the issue occurs when running a job, try to create a CmdExec type job step to call the excutable. If this job also fails, it might be an issue between executable and SQL Server Agent rather than the SSIS package itself.
If the issue persists, enable logging for the package, and check if we can obtain more detailed error message for further analysis.
Regards,
Mike Yin
TechNet Community Support -
Hi All
when i am using the Process execute task in ssis it is failing with the fallowing error
[Execute Process Task] Error: In Executing "C:\Program Files\PuTTY\pscp.exe" "echo y | pscp -sftp -pw Password
[email protected]:/opt/DSC_6_0_R5/logs/metrics.csv C:\Users\Public\Documents\SurendraData\DRA\PSCPTest\server1A_metrics_SSIS.csv" at "C:\Program Files\PuTTY", The process
exit code was "1" while the expected was "0".
when i run the same command from cmd promt is succesful
The command is
echo y | pscp -sftp -pw Passwprd
[email protected]:/opt/DSC_6_0_R5/logs/metrics.csv C:\Users\Public\Documents\SurendraData\DRA\PSCPTest\server1A_metrics_SSIS.csv
In Execute Process task i have set the fallowing value
Executeable = C:\Program Files\PuTTY\pscp.exe
Arguments = echo y | pscp -sftp -pw Passwprd
[email protected]:/opt/DSC_6_0_R5/logs/metrics.csv C:\Users\Public\Documents\SurendraData\DRA\PSCPTest\server1A_metrics_SSIS.csv
Working directory = C:\Program Files\PuTTY
what is the issue ? how to solve that
Surendra ThotaThe " are necessary to pass in a path with spaces1 st try it in a script. See if that works. If not see this good tutorial: https://sqlserverrider.wordpress.com/tag/execute-process-task/
or
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2013/03/04/integration-services-packages-using-execute-process-task-with-winzip32-exe-fails-intermittently-when-run-under-a-sql-server-agent-job.aspx
Arthur My Blog -
SSIS execute process task error on unziping
Hi
I am using 7zip to unzip files in SSIS using execute process task. Here is the configuration of the task:
executable: C:\Program Files\7-Zip\7z.exe
arguments: e default-o\\servername\livechat\unzip\
However, on executing package in BIDS, following error is thrown
[Execute Process Task] Error: In Executing "C:\Program Files\7-Zip\7z.exe" "e \\servername\livechat\7566_20121009.zip-o\\servername\livechat\unzip\" at "", The process exit code was "2" while the expected was "0".
Can someone help where I made mistake?
Thanks,
hsbalI have mapped the share to F: and then tested. Unfortunately that doesnt work as well.
I am getting the following error:
[Execute Process Task] Error: In Executing "C:\Program Files\7-Zip\7z.exe" " F:\*.zip -o F:\unzip" at "", The process exit code was "7" while the expected was "0".
Thanks,
hsbal
Seems like a syntax error. Go through this
http://www.dotnetperls.com/7-zip-examples
Rajkumar -
Hi Sir,
I have develop the SSIS Package in 2012 version and i am calling the SSIS Package using Stored Procedure according to my requirement and that stored procedure will be using in my SSRS report Datasource.
once after the SSIS Pacakge has design and develop and deploy into the server as Project Deployment model..when i run the ssis Package ,calling through the SP it is working fine...
even when i design a SSRS report using SSDT(sql server data tools), in the SSRS reprot calling the above SP in Dataset.when i execute the SSRS report it is wroking fine...
once SSRS report has been deployed into the remote Server.. when i Execute the SSRS report i am getting the below Error message:
SSIS-Execute Process task Error _File/Process "\\Servername\Foldername\batfile.bat" is not in path
belo is the SP for calling the SSIS package.
DECLARE @EXECUTION_ID BIGINT,
@PKG_RESULT INT
EXEC [SSISDB].[CATALOG].[CREATE_EXECUTION] @PACKAGE_NAME=N'abc.DTSX',
@EXECUTION_ID=@EXECUTION_ID
OUTPUT,
@FOLDER_NAME=N'aa',
@PROJECT_NAME=N'xxx',
@USE32BITRUNTIME=FALSE,
@REFERENCE_ID=29 --unique identifier for environment
EXEC [SSISDB].[CATALOG].[START_EXECUTION] @EXECUTION_IDWhere the BAT part is ?
It looks like a security issue.
The account running has no permission apparently over "\\Servername\Foldername\batfile.bat"
Arthur My Blog -
Execute Process Task - Error :The process exit code was "2" while the expected was "0".
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:\Program Files (x86)\Microsoft SQL Server\90\COM
Executable : C:\SQL_bat_Files\SQL5\TC_CTI\customer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:\SQL_bat_Files\sql5\TC_CTI\sql_files\customer1"
the .sql file will be generated at: C:\SQL_bat_Files\sql5\TC_CTI\sql_files\customer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:\SQL_bat_Files\SQL5\TC_CTI\package_occurrence.bat" "" at "C:\Program Files (x86)\Microsoft SQL Server\90\COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?Jwelch,
Thanks for the input,
"Change the SuccessValue property of the Execute Process task from 0 to 2 (which means that you will get a failure if there are no differences, since TableDiff returns 0 in that case)."
-- Not possible b'coz if there is no difference in the tables, which is also a possiblility, the job will fail.
"FailTaskIfReturnCodeIsNotSuccessValue to FALSE (which means it won't fail regardless of the code returned)."
-- Does this mean the job will never fail? Lets say the target table doesnt exist, then, by setting "FailTaskIfReturnCodeIsNotSuccessValue to FALSE " will the job fail? I guess my question is, how is what you've suggested different from setting "ForceExecutionResult = Success". Both the cases will show the task status "Success" even if there is an error.
Is there a way to keep the property of job 'Failure' if there is any generic errors like target table not found or say, the path given for .sql file output is not valid etc.
Thanks again,
Little_Birdie. -
Execute Process Task error-Unzip Files
Dear All,
I have a SSIS package, that downloads a Zip file from FTP Server and extract and load that information in Sql Server Table. In my case every time I have only one file in FTP Server. There is no possible to get multiple files from FTP Server.
While at the time of executing SSIS package getting error at Execute Process Task(Unzip Files) i.e
Error Description :In Executing "F:\7z\7z.exe" " x F:\ZipFiles\Sales_010815.zip -oF:\ZipFiles\" at "", The process exit code was "2" while the expected was "0".
This error message getting while unzip my file.
Can some one help on this issue.
Regards,
Praveen C.
Regards, PraveenHi Praveen,
After testing the issue in my environment, I find the issue is caused by the code in Arguments is incorrect.
To fix this issue, please refer to the code below:
x F:\ZipFiles\Sales_010815.zip -oF:\ZipFiles
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Hi Sir,
I have designed the SSIS Package in 2012 Version. and i have deployed into the Integration Server,using Project Deployment Model.
In the SSIS Pacakge we are calling the batch file using Execute Process task.
when i am Executing the SSIS pacakge using Visual Studio(Sql Server Data tools) which is working fine.
When i Execute the Pacakge uisng Sql server Management Studio,after the Deployment i am getting the below Error message.
ExecProcess task:Error: File/Process "\\Servername\Foldername\batfile.bat" is not in path.
Thanks for your time.
Regards
PrasadHi Prasad,
When you say executing the package in SSMS, I think you right click on the package and execute it manually rather than execute it through SQL Server Agent job, right? How did you execute the package from the SSMS on DEV server? Have your also deployed the
SSIS project to the SSISDB catalog on DEV server or you used SSMS tool on DEV to connect to the QA server to execute the package?
When you log into the Database Engine instance, make sure the credentials you used has access on the shared folder which hosts the .bat file. Besides, I think the issue may be caused by the Windows UAC feature which may lower the permissions level of an
administrator to a standard user. So, I suggest that you run the SSMS as administrator to see if it works.
Regards,
Mike Yin
TechNet Community Support -
Hi,
I am using Windows Server 2012 R2 Standard, SSIS 2012. I am trying to copy files from a remote location by calling pscp.exe through a batch file (FileCopy.bat at location M:\bin\) which is referenced in a SSIS Execute Process Task. My batch file content
is,
ECHO OFF
echo. >> M:\Prod\bin\SourceFile_FileLog.txt
echo %date% - %time% - Copy Start (XYZ_a201211155952avx0_69999.NOR.gz) >> M:\Prod\bin\SourceFile_FileLog.txt
M:\ProdFiles\bin\pscp.exe -unsafe -scp -pw aaaaa myuser@sourceserver:/ABC_data/*.NOR.gz M:\Prod\FromMediation\
echo %date% - %time% - Copy Complete >> M:\Prod\bin\SourceFile_FileLog.txt
The error I am getting is
[Execute Process Task] Error: In Executing "M:\bin\FileCopy.bat" "" at "", The process exit code was "1" while the expected was "0".
Exactly same setup but using Windows Server 2003 R2 Enterprise and SSIS 2005, this works fine and copies the files successfully.
Please provide some guidance on this.
Thank you!
'In Persuit of Happiness' and ..... learning SQL.Hi,
This is what I am getting while running the batch file from command prompt
M:\bin\mttrb1>CDR_FileCopy
M:\bin\mttrb1>ECHO OFF
The system cannot find the path specified.
The system cannot find the path specified.
scp: M:\Prod\FromMediation\: Cannot create file
scp: M:\Prod\FromMediation\: Cannot create file
scp: M:\Prod\FromMediation\: Cannot create file
The system cannot find the path specified.
'In Persuit of Happiness' and ..... learning SQL. -
Execute Process Task quote encloses arguments
Is there any way to not have SSIS Exceute Process Task quote enclose the arguments?
This is what the script task is echoing out to me via DTS.Events.FireInformation method - it is in the format I need.
-File "C:\Development\KP Integration\KP Integration\ADExport.ps1" "C:\Test\ADUsers.csv"
By the time the Execute Task Component consumes it, it quotes the entire expression. There is a prefix " before -File and a suffix quote at the end of the statement as shown below.
[Execute Process Task] Error: In Executing "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe"
"-File "C:\Development\KP Integration\KP Integration\ADExport.ps1" "C:\Test\ADUsers.csv""
Again, I've verified quotes are in the right places for the arguments, but the script component seems to want to qualify the entire argument string as one long string and not take the value as is, which is causing an exception
Thanks,
MorganThis appears to be a bug with how the expression is handled in the Exec Process Task.
Information: 0x0 at Build Path: -File "C:\Test\test.ps1" "C:\argument\path\test.csv"
Error: 0xC0029151 at Execute Process Task, Execute Process Task: In Executing "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" "-File "C:\Test\test.ps1" "C:\argument\path\test.csv"" at "".
Looks like I'll be moving the powershell integration to a step in a SQL Agent task, was trying to keep it contained to a package but it looks like the expression is converted to a literal and quote-enclosing the value rather than passing the value as-is. -
Using UNC Path With Execute Process Task
I have an Execute Process task in which the process can either delete, get or put files to an SFTP site. The executeable takes arguments in the following format:
"host" "user" "password" "put" "full local path/filename" "full remote path/filename"
I have the task configured as follows:
RequireFullFileName: True
Executeable: \\server\groups\Development\ETLFiles\ETL_Utilities\ocsshhelper\ocsshhelper.exe
Arguments: sftp user password \\server\groups\Developmement\ETLFiles\ETL_Data_Files\CT_FS_Export_20081113.csv stateExport\export
WorkingDirectory: \\server\groups\Development\ETLFiles\ETL_Utilities\ocsshhelper
WindowStyle: Hidden
Arguments, Executeable and WorkingDirectory have been configured as Expressions. When I execute the package in BIDS from my Windows XP SP3 machine, The task fails with the following error:
[Execute Process Task] Error: In Executing "\\server\groups\Development\ETLFiles\ETL_Utilities\ocSSHHelper\ocsshhelper.exe" "sftp user password put \\server\groups\Development\ETLFiles\ETL_Data_Files\CT_FS_Export_20081113.csv stateExport\export" at "\\server\groups\Development\ETLFiles\ETL_Utilities\ocSSHHelper", The process exit code was "-532459699" while the expected was "0".
My domain account has 'effective' full control rights to the location of ocsshhelper.exe.
It could be that the executable does not support UNC paths, and I'm checking that. I have another package that uses this same application, but uses the physical path, and there are no problems. Does the Execute Process task have issues with UNC paths?
Thank you for your help
cdun2Actually it doesn't work properly in SQL Server 2008 R2. I have a similar EP task. If I set the working directory to \\server\share\subdir the task fails. However, if I map a drive latter to the \\server\share and set working directory to <drive>:\subdir
it works -
Execute process task argument is not working for sph file and ogr2ogr.exe
Hi All,
I am trying to load shape file into a sql spatial table. A execution process task is used to run the ogr2ogr.exe program.
This is how the process tab looks like .
Executable : C:\gdal_ogr2ogr\bin\gdal\apps\ogr2ogr.exe
Argument : -f MSSQLSpatial MSSQL:server=SQL-ABC-DEV;database=MYSIMPLE_Dev;Trusted_Connection=True;\\mypath\files\shares\Data\www.mypage.htm\my_sample_file.shp
Success value : 1 (I am not sure why I need to change this value from 0 to 1.
For above settings, package runs fine. However the spatial table is not created always. It is created once in a while after switching Success value from 1 to 0 and 0 to 1 again. (After the spatial table is created, it is dropped using a execute sql statement).
I am running this in VS 2012.I saw in an article that we need to convert shp file to csv before we load it into sql server.I even tried to convert shp to csv using execute sql task and ogr2ogr.exe. Still the package runs successfully after changing Success
value from 0 to 1 but no csv file is created. If the success value is 0, it throws the following error.
[Execute Process Task] Error: In Executing "C:\gdal_ogr2ogr\bin\gdal\apps\ogr2ogr.exe" " -f CSV \\xxxxxxxxr.rdn\files\shares\xxx_Data\ImportData\www.xxxxxxx.hapepage.htm\xxxxxx\Watches\Warnings\myfile\CSV \\xxxxxxxxr.rdn\files\shares\xxx_Data\ImportData\www.xxxxxxx.hapepage.htm\xxxxxx\Watches\Warnings\myfiles\www.shp"
at "", The process exit code was "1" while the expected was "0".
Could long file name be a problem too?
Thanks for your help in advance..
shamenHello shamen,
Seems to me you are missing a step to check if the shape is there and purge it before loading if so.
Arthur My Blog -
Execute SSIS Package from JOB which contains Execute Process Task calling a .bat file
Hi All,
I have a EXCEL Macro needs to be called from SSIS. We could not use Script task because of some internal reason.
So we have taken an approach to call a .BAT file using Execute Process Task. This .BAT file will call a .VBS file which will execute the EXCEL Macro.
The SSIS Package is running good if I execute the package from BIDS.
But the real problem is with the scheduling this SSIS Package using SQL JOB.
If i execute this SSIS package from SQL Server Job, its executing the whole package successfully except the Execute Process Task.
So the overall issue is SQL Server Job is not executing properly if I call any .BAT file from the SSIS Package.
Please give me suggestion to get rid of the issue. Thanks in advance.Hi Sai.N,
If you run the SQL Server Agent job manually from SSMS, does the package execute properly? If the package executes properly when you run the job manually, the issue should occur due to permission issue. In this case, I suggest that you create a SQL Server
Agent proxy based on the current Windows account which you use to log onto the operating system, and run the job under the proxy account.
If it is not the issue, please enable logging in the package as Visakh mentioned and post the warning/error message for further analysis.
Regards,
Mike Yin
TechNet Community Support -
Execute Process Task configuration for WinSCP
Hi Experts,
I've been tasked to use WinFTP to pull files from an sFTP site to our local W2007 server using an SSIS Execute Process Task. I'm trying to get the task to run a script containing the UN/PW and other info, text below. The script works from the
command line:
Here's the Process window from the task:
When I run the task, the error says Host "\script=C" does not exist. Are there some special characters I need to use around the colon or something? It's like the task isn't sending the complete path.
Here's the text of the script, in case it matters.
option batch abort
option confirm off
open sftp://User:Password@site
get Media*2013.txt C:\FTP\
get Media*2014.txt C:\FTP\
close
exit
None of the recommended solutions I've found have worked for me. Help!?! Please???
Thanks in advance!Look at this example, i remeber doing this where a profile needs to be created in advance via the console this profile then need to be accessed via the script, this link should help you it has an example belo
http://winscp.net/eng/docs/scripting
Look at this aswell
http://winscp.net/eng/docs/guide_automation#script_file
# Automatically abort script on errors
option batch abort
# Disable overwrite confirmations that conflict with the previous
option confirm off
# Connect using a password
# open sftp://user:[email protected] -hostkey="ssh-rsa 1024 xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx"
# Connect
open sftp://[email protected] -hostkey="ssh-rsa 1024 xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx"
# Change remote directory
cd /home/user
# Force binary mode transfer
option transfer binary
# Download file to the local directory d:\
get examplefile.txt d:\
# Disconnect
close
# Connect as a different user
open sftp://[email protected]
# Change the remote directory
cd /home/user2
# Upload the file to current working directory
put d:\examplefile.txt
# Disconnect
close
# Exit WinSCP
exit
Abhinav http://bishtabhinav.wordpress.com/ -
Failed to load Execute Package Task error.
Hello Experts,
Excuse my newbie question.
Execute Package Task: Error: The task has failed to load. The contact information for the task is "Microsoft Corporation; Microsoft SQL Server; Microsoft corporation; All Rights Reserved http://www.microsoft.com/sql/support/default.asp:1"
We have a windows service running on our app server that deploys a package that executes other packages using execute package task. This package and rest of the packages are in the same folder at the same level under integration services
catalog. The package fails to execute with the above said error.
Execute package task is configured to run in 'in-process' mode. Changing delay validation to true/false in child packages didn't help.
ironically if the package is deployed using a console application from the app server the package gets executed just fine. I checked permissions, everything seem fine.
Is there anyway to get details of this error to understand the problem better? I am looking at reports > standard reports > all executions.
Thanks.As it turns out, the 63bit ExecPackageTask.dll was not found under "C:\Program Files\Microsoft SQL Server\110\DTS\Binn". Installing "SQL Server Data Tools" installed only 32 bit version of the component under "C:\Program Files (x86)\Microsoft SQL
Server\110\DTS\Binn".
Is there a way to get 64bit version of this component without installing "Integration Services" (to avoid possible license issues)?
Hi Jayakarthiks,
To make use of the 64-bit ExecPackageTask.dll, you also need the 64-bit SSIS runtime and 64-bit DTExec utility tool. To obtain the 64-bit SSIS runtime and tools, you have to install the SQL Server Integration Services service from your SQL Server 2012 install
media.
Reference:
http://msdn.microsoft.com/en-us/library/ms143731.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support
Maybe you are looking for
-
Problem with iWeb 09, after the publication in a local file.
*Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.* After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" w
-
Target Disc Mode doesn't Work - what do I do?
So my old Apple (2004 G4 Powerbook) went out on me. It will start it up but it won't advance past the start up screen. So I bought a new Apple. I have followed the instructions on how to transfer data from the old one to the new one using the Target
-
Good Morning Everyone, I am creating a report with a barchart in a column of the report. i have been following these for reference. (mainly the first link) http://htmldb.oracle.com/pls/otn/f?p=31517:183:5430906720971021::NO http://apex.oracle.com/pls
-
How to create Auto complete text box in share point 2010 Visual web part
Hi All , I am want to use Auto complete text box in share point 2010 Visual web part ,data need to get from share point list how to create please guide me how to use Auto complete text box Thanking you, Arun Darly
-
HI All, we are facing SQL Server hung situation frequently as per the error log we received below mention error: Using 'dbghelp.dll' version '4.0.5' **Dump thread - spid = 0, EC = 0x0000000000000000 ***Stack Dump being sent to D:\MSSQL10_50.MSSQLSER