Execute Report after Opening a screen & query its data
Dear All,
Please user is requiring that after quering on the requistion form , the report of requistion runs automatically .... is that possible to be done or not ?
If it's possible will you provide me any document having the step to do this
Thanks In Advance
Edited by: miro_feps on Jun 25, 2012 11:18 PM
Hi Miro,
I assume this form is an Oracle Forms form. If this is the case, you can use Oracle Forms Personalization to react on certain actions in your form. Unfortunately the event you are requesting (After Query) is not part of the default events.
My suggestion is then rather another custom menu which points to the print function. You can also add a menu in Tools to let the user start the printing.
Would this be an option?
kr
Volker
Similar Messages
-
Table Name to take report of Open Sales Order items&its relevant GL Number.
Hi,
I wanted to take a report with Output as Open Sales Order Items and its relevant GL account numbers. is there any T Code in the Standard or atleast the table name.
I have already fetched the Open Sales Order Items from T code VA05, but i need the relevant GL account numbers also.
Any pointers on this will be appreciable.
Rgds,Hi
There are no standard reports where in you can fetch the data of the open sales order items and its G/L accounts with the output. But by creating your own report using LIS then it is possible
Regards
Srinath -
Blank after opening gray screen
I have a MBP 17", and after the recent system update that was offered (and I installed), my display is acting screwy.
When I start up, I get the opening gray screen with Apple above the rotating dial. At the moment that it should pop up with my desktop, the screen goes black. The keys still work, and I think the system is properly completing the bootup, as I hear the "bonk" sound when I hit the escape key, etc. I've hard rebooted, reset the PRAM, all the usual troubleshooting. But I just can't get beyond the gray screen to my desktop. Any ideas?Aha! I called Apple & got my answer. (I try the boards first.)
He told me that it seems my power management settings may have gotten messed up. Here's how he helped me through.
Disconnect all power (remove laptop batteries, too).
Press and hold the power-on button for 15 seconds.
Reconnect power, and startup the computer while zapping the PRAM. (Hold down "command" & "option" & "P" & "R" all together immediately after hitting startup button and BEFORE the first chime.
Hold the buttons through the second chime, then release.
My MBP chimed once more, then viola! My display was back up.
Hope this helped.
Bill -
I'm not sure when it began, but now my Macbook Air only shows a black background and a User Name and Password dialog box when I wake it from sleep. It used to show my desktop background blurred with my user name and icon displayed with only a text field for entering my password. I'm currently using Yosemite (OS X 10.10.1) and all updates have been done. Any help or suggestions would be greatly appreciated as I know this isn't a real problem, just an annoyance since I couldn't find how to change it back in the System Preferences.
I just have to point out that after looking at a related post (https://discussions.apple.com/message/22661092#22661092), it brought to memory that my issue most certainly began happening after I added some DoD certificates to the keychain. This obviously has something to do with it, but it still leaves me wondering what actually causes this to happen. :/
-
Hi,
So I am trying to be organized, and am sorting through some old files, all arranged as a bunch of files and subfolders within project folders. I sort these project folders by date, with the oldest at the top of the window. I open the oldest folder (with the triangle, not in a new window) to see whats in there, do the same with any subfolder that may be there, close them again, and a few seconds later the main folder date updates to the current date and jumps to the bottom of the list. This is infuriating me!, I now have projects that haven't been opened since 2001, inside a folder showing 'date modified' as 5 minutes ago.
It appears that opening a subfolder will update the date of the folder it is in. This is ridiculous!! you try to be organised with your filing and that's the thanks you get! now when i view all these projects by date, I wouldnt have a clue how old they were unless I open the folder. stupid!
I have noticed this with 2 macs, can anyone help, this can't be normal procedure. note, I havent opened, let alone saved anything, just viewed the contents of folders.
help!!Hi folks,
This issue has been driving me crazy, and I've been searching everywhere for a solution... today I am happy to report that I found one!
Limit Point Software has just released a great utility for dealing with this issue where folders have their "Date Modified" altered after you just opened the folder.
It is called "SyncFF" and you can download at:
http://www.limit-point.com/Utilities.html
Here is the product description:
SyncFF is a drop utility for setting the modification and creation date of folders to the latest modification date of their contained files. This way the modification date of the folder matches the modification date of the "oldest" file it contains. The process is recursive, which implies all subfolders are processed too. Universal Binary, Mac OS X 10.4 and above.
It works wonderfully, and it is so nice to have the proper modification dates on my folders and projects again.
I should also say that the developer is very helpful and responsive to feedback.
Zed -
Getting 404 not found error-while creating classic report - after sql query
my work space - upgrade
while iam trying to develop a page today in work space - under classic report - after i provided the query and when pressed next to go to report attribuites section - iam facing 404 not found issue.,
this is happening just today.
and all teh other pages are working fine - do not know what ios the issue - can anybody help me here please..
query used for classic report
select DISTINCT cust.customer,prod.ebs_team
from
CUSTOMER_11i@upgrade Cust
,BUG_PRODUCTS@upgrade PROD
where 1=1
and cust.product_id = prod.product_id
and prod.prodline = 'EBS'
and IS_CUST_11 = 'YES'
and NVL(IS_CUST_121,'NO') = 'NO'
and NVL(IS_CUST_12,'NO') = 'NO'
order by 1;
with regards
Shiva Prasad.k
Edited by: user759720 on Feb 14, 2012 5:00 AMHi Shiva,
to diagnose a 404 error please have a look at http://www.inside-oracle-apex.com/oracle-apex-got-404-not-found-2/
This should give you sufficient information to find out what is actually failing.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf -
Close File 24 hours After Opening
(Not having experience with pdf java script), I've been trying for 5 or 6 weeks to write a script - to be placed in Document Scripts (I'd prefer to say away from form fields) - that keeps a file open 24 hours after it's first launched––and then closes. (It's a 24 hour trial version).
I've tried different configurations. (This following script works but doesn't serve my goal: Reason is, in the script below, the "final date" is fixed. The final date has to be calculated as 24 hours (1440 * 60 * 1000) after the initial launch date.):
var curDate = new Date();
var finalDate = new Date("8/08/2011");
if(finalDate.getTime() < curDate.getTime())
{this.closeDoc(true);}
I've tried using the following as the launch date but I can't make it work:
var f = this.getField("Today");
f.value = util.printd("mm/dd/yy", new Date());
The user is free to open and close the file during the 24 hours: So: I'm also concerned that the initial "curDate" remain stable. If it doesn't, I must change that part of the script as well and use a "Date the file was opened" as a variable. I've triend to use calcluations - but have not been able to succeed. At least, I figured out, there are 3 variables: the open-file-date, the 24 hours after open file date, and current date. In the end, I check to see if the 24-hours-after-open file is < than current date and if so, closeDoc. At least I learned that much.
Can anyone help me? I bet it's simpler than what I'm making it out to be, but I'm burnt to a crisp - I've spend all my time on this and have come to realize, it's above my skill level and could use some help..... thank you in advance
ClintYou should be aware that even if you get the code right, this method can easily be disabled simply by the user disabling JavaScript, or using a non-Adobe PDF viewer.
The main difficulty seems to be that you are not recording and storing the initial opening date/time. You will have to store this date somewhere, either in the document or in a global variable. The problem with storing it in the document is the modified document would have to be saved by the user, which may not happen. So that leaves using a global variable.
Your code could first check for the existence of the global variable that you set up for this, and if it doesn't exists, create it, set its value to the current date/time, and set it to be persistent. You do this with the global.setPersistent method: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.778.html
Read up on the other information on the global object in the documentation.
You then just need to compare the current date to this stored date whenever the document is opened. If the difference exceeds 24 hours, oyu cna close the document using the doc.closeDoc method: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.448.html
Here's a little information on date arithmetic: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_Dev_AcrobatForms.76.35.ht ml
And you should be able to find more with a search.
Again, this can't be considered secure or robust, but it may be sufficient for your needs. -
Error while execute report MB5B
Dear all,
I try to execute report MB5B in client 350 . all input data is correct format .
But when i execute this report i get a error like
" Combination is not possible: VALUATED_STOCK and NO_CANCELLATIONS "
So can u please help me how can i resolve this problem .
or my input is may be wrong or any other problem in this execution .
Please kindly help me out.
Thanks
KeyurHi Keyur,
There are a lot of notes about this tcode, for instance, you can see SAP Note 195786 - MB5B: Collective Note to have an idea about this issue. In coding for AT SELECTION SCREEN you have a lot of coding and you can see in commnets a lot of notes. I suggest you to do a debugging session with the purpose to identify the source of error message. Seach the message in tcode SE91 and set break-points to do it, because in my opinion the problem is caused by the selection.
I hope this helps you
Regards
Eduardo -
My query is not executing properly after applying patches(bi.7
iam working bi.7 support package 13
after applying patches
my query is not executing properly in production my problem with FI queries
the query is executing properly but ihav created newformula using formulavariable that fields are not getting data in report if i click on currency conversion iam getting popup but currency translation coversion list is not coming and currency type(target currency also not dispalying)
but if i execute same query in development its working properly newformula fields are getting data and currency conversion also working in development
can u please help me in this issure
i hope as soon i will get solutions from bw gurusThat currency conversion problem is solved
i checked TCODE:RSCUR IN PRD its not showing any details
again i checked in dev and moved all currency types dev to production
now its wokring
i hope check with this it will work -
Data Error in the Query/Report after selective data deletion for infocube
Hi Experts,
Please advise what i was missing and what went wrong...
I got a Query (Forecast) on a Multicube...which is based on 2 Infocubes with Aggregates...
As i identified some data discrepency..yesteraday i performed selective data deleation on one of the Infocube
and executed report yesteraday and the results in the query are correct...
When today i executed the same report i am getting different results..
When i compared the results of the report with that of data in cube they are not matching
The report is not displaying the data in cube..for some rows it is displaying the data in the cube but for some rows it is just displaying same as the above row
there is no data loaded into info cube after selective deleation
Do i need to perform request compression and fill the aggregated after selective deleation
Please advise what went wrongHi Venkat,
No i haven't done anything on aggregates before or after selective delete
As there is not data load after the selective delete according to SAP Manual we don't need to perform any thing on aggregates...as selective data deletion on cube will delete data from aggregates as well
Please update how to identify error -
Brower hang after executing report
Hi,
I installed 9ias 1.0.2.1 on Sun Machine Everything is working fine except Report server. Executing report from browser taking long time and after that gave me this error.
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job was cancelled upon user request.
I also fixed TNS_ADMIN location but have same problem.
When I started Reports server It's started without error.Hi.
You should find whrther your problem is in bex web or general.
Did you tried to execute via RSRT with this username ?
Do you have any authorization infoobjects in query ?
Regards. -
Error while executing report in query designer
Dear Folks,
I am geting following error while executing report in query designer.
Error:500 E
an exception raised because of 0analysis pattern.
Hence,i am unable to execute any report.
Need help.
ThanksHi Kitu G,
I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
I would try and do the following:
- Goto RSA1 > BI Content > BEx Web Template (BTMP)
- Then double-click on Select Object.
- Highlight all objects that start with 0ANALYSIS_PATTERN
- Click on Transfer Selections, and then Install.
If you can't do the above in prd, do it in DEV, then transport the objects to prd.
After all this, try re-running your queries.
Any questions/clarification just let me know
Cheers.
Darwin -
SQL query was failed in my report after migrating to Oracle 10gR2
We have a aplication running under Oracle 9.2.0.4 DB. we migrated our DB to Oracle 10gR2. While running the report, we got an error:
ORA-00904: "A3"."FACILITY_SYSTEM_ID": invalid identifier
ORA-06512: at "CEAS_MK_RPT.GET_LIST", line 12
The SQL query which causes this error is:
INSERT INTO gtt_facility_seq_generator
(date_range)
SELECT get_list
(CURSOR (SELECT auf.facility_system_id
FROM authorized_facility auf
WHERE auf.facility_system_id = afs.facility_system_id
AND auf.credit_application_system_id = :p_cred_appln_id
FROM authorized_facility afs,
(SELECT af.facility_system_id facility_system_id
FROM facility_obligor fo, authorized_facility af, party p
WHERE fo.facility_system_id = af.facility_system_id
AND fo.party_system_id = p.party_system_id
AND NOT EXISTS (
SELECT NULL
FROM facility_third_party_subst iftps
WHERE iftps.facility_system_id =
fo.facility_system_id)
) tab1
WHERE afs.credit_application_system_id = :p_cred_appln_id
AND tab1.facility_system_id = afs.facility_system_id
ORDER BY afs.creation_date;
The content of function get_list() is:
CREATE OR REPLACE FUNCTION CEAS_MK_RPT.Get_List
p_cursor IN sys_refcursor
RETURN VARCHAR2
IS
l_sep VARCHAR2(4);
l_text VARCHAR2(30000);
l_text_return VARCHAR2(30000);
BEGIN
LOOP
FETCH p_cursor INTO l_text;
EXIT WHEN p_cursor%NOTFOUND;
l_text_return := l_text_return || l_sep || l_text;
l_sep := CHR(10);
END LOOP;
CLOSE p_cursor;
RETURN l_text_return;
dbms_output.put_line ('a');
END Get_List;
The same report was executed perfectly in Oracle 9i. Kindly help us to short out this issue. Thanks in advance.
Regards,
Sengol SHi Nirav,
Many thanks for your response. I verified the same, but the same query was executed successfully after removing the INSERT INTO part(executed the SELECT part only). What might be the cause for this error?
For your kind information :
I have 2 schema in my DB( ceas_mk_app and ceas_mk_rpt ).
All the source tables are present in ceas_mk_app schema - These tables are used by ceas_mk_rpt schema(using synonym) to generate the report.
I'm executing the above said query from ceas_mk_rpt to insert the necessary data in to report temp. table.
Thanks,
Sengol S
Edited by: seng1256 on Dec 22, 2008 12:31 PM -
Call(PUSH) Button after executing report
Hi,
After executing report how to call select layout button automatically,
and select layout screen display at output of screen after executing
report.
Regards
Arpithow can we pass key stroke ctrl + F9 or call function code "&0AD" for selecting layout.
pls advice.
Regards
Arpit -
Report - open/closed goods receipt & its MIRO Document number
Dear all,
Is there any standard report for open/closed goods receipt(Material doc. no.) & its MIRO Document number based on good receipt posting date ?
Awaiting valuable reply.
JeyakanthanHi,
If your requirement is only to display Open GR & Open IR with material & a/cing document, then you need to develop a report.
Tables
EKPO - PO and line item
EKBE - documents with values
You can create a query with the help of SQ01 / SQVI. Then you can create TCode with thehelp SE91.
Pick up values for selection parameters and display while creating query.
Anand.
Maybe you are looking for
-
Can you increase the brightness of a photo in order to edit and then return to the original brighten
Can you increase the brightness of a photo temporarily while editing in PS and then return to the original brightness. My problem is that I want to delete some objects in my photo and can hardly see them.
-
FLat file Extended analytics extract from HFM
The file we extract is in a unicode/binary - how do we convert that to the regular mode?. Any suggestions. Thanks.
-
I feel nervous about directly using pop-up reminder messages to update software. I am aware that there are frequently false messages that appear to be from a company whose software I use, and that clicking on them to update, can cause seious problems
-
How to change language on Adobe Photoshop CS6?
I downloaded it a while ago, and I tried to find locales in the Adobe photoshop folder but I couldn't find it. So how can I change the language? Thanks.
-
Where we are integrating ESS with R/3
Hi Experts, Please let me know in ESS implementation roles of HR functional consultant. Like R/3 level configuration. Pls help,