Execute report painter report in background

Hi All,
I have created new library, report group and a new report in report painter, the report is working fine if we execute in foreground, but if we execute in background then the values are blank.
Please help me how to get the values if we execute the report in background.
Regards,
Raj

Hi,
I have created a new report for balance sheet which displays for whole year by a break up of periods from 1 to 16,
because if extracting the data for whole year i am getting ABAP short dump as runtime exceeded.
Now i want to run the report in background, but when i run the report in background the values are not appearing in the report.
I am using T.code GRR3.
Regards,
Raj

Similar Messages

  • Executing Report Painter Report in Loop With Different Selection Parameters

    Hello all,
    I have to execute a report painter report about 300 times, allways with a different set of selection parameters and allwasy send the result to a different person via mail.
    Has someone an idea how to to this work in an automatic loop.
    Thanks.

    HI,
    My suggestion is to discuss this with your technical team (ABAP). A Good idea would be to create a wrapper program (small program based on your report painted report code) that contains email functionality. You can then save your 300 variants and then schedule a background job for the same using transaction code SM36.
    Regards

  • Function Modules to Execute Report Painter Report

    Hi Experts,
    May I know if there is any way to execute the GR55 Report Painter reports, and get the report result back as a table?
    I need this to write a program to export the result to a external system.
    Many thanks!!!
    Regards,
    Chris

    I am actually expecting a ABAP way to do so, but not to do that in foreground manually.
    I found the solution anyway by using the below sample code:
    *&      Form  frm_retrieve_data
          text:Get report painter Result
    FORM frm_retrieve_data .
      DATA:lt_params  TYPE STANDARD TABLE OF alv_s_param_wp,
           lwa_params TYPE alv_s_param_wp,
           lwa_msg    LIKE LINE OF gt_msg,
           lv_dcpfm   TYPE xudcpfm.
      CLEAR:gt_data,gt_msg.
    Set report painter Paramters
      lwa_params-pname = '$PARAMETER[$ZRYEAR0'.
      lwa_params-pvalue = sy-datum+0(4).
      APPEND lwa_params TO lt_params .
      lwa_params-pname = '$PARAMETER[$ZBUKRS0'.
      lwa_params-pvalue = 'JNPC'.
      APPEND lwa_params TO lt_params .
      lwa_params-pname = '$PARAMETER[$ZBUKRS1'.
      lwa_params-pvalue = 'JNPC'.
      APPEND lwa_params TO lt_params .
      lwa_params-pname = '$PARAMETER[$ZF-RP00'.
      lwa_params-pvalue = sy-datum+4(2).
      APPEND lwa_params TO lt_params .
      CALL FUNCTION 'CRIF_RW_WEB_CALL_REPORT'
        EXPORTING
          i_report_group = 'JNZ1'
        TABLES
          it_params      = lt_params
          et_data        = gt_data
          et_messages    = gt_msg.
      LOOP AT gt_msg INTO lwa_msg
        WHERE type = 'E' OR type = 'A'.
        gv_flg = cns_yes.
        EXIT.
      ENDLOOP.
      IF gv_flg IS INITIAL AND
         gt_data IS INITIAL.
        gv_flg = cns_nodata.
      ENDIF.
    ENDFORM.                    " frm_retrieve_data

  • In report painter report, line item level drilldown report requirment

    Dear All,
    I created one report in GRR1, when I execute the report i am not getting line item wise drilldown option. For example one cost center no of line itemwise posting ( g/ls wise)posting is there. By double clicking on that specific line item we will go that ledger and see the data available in that ledger.In standard reports that option available but my own reports I unable to go drilldown at ledger level cost reports.
    Please sugget anyone, where I am doing mistake in report creation level.
    Thanks
    M Srinivasa reddy
    Ph : 9637399076

    Thank you,
    I attached reports to Library based on that I am able to drilldown line item level of the report.Is it corret or any other way for line item level drilldown option for report painter reports
    Thanks
    M Srinivasa reddy

  • Data of the Report Painter report

    Dear ALL,
    I have the Report Painter report. When I'm executing this report I can save the data into the extract.
    Could you tell me where are these data in the system(table?)? I want use these data for SAP script form.
    Best regards,
    Igor

    Please go through the enclosed document. This will give you step-by-step approach for Report painter:
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    Check url
    http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
    Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
    Just go through These Links to learn about report Painter.
    http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    Please go through the enclosed document. This will give you step-by-step approach for Report painter:
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    Check url
    http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
    Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
    Just go through These Links to learn about report Painter.
    http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    I think it will give you some hint. I wish I could have authorization to use report painter on my this project so I can help you out practically.
    Please see these steps , it`ll help you ...
    http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp
    regards
    vinod

  • Report Painter Report Performance Issue

    hi,
    My client facing the problem with Report painter reports , almost all the reports taking much amount of time to execute . we are Using 5.0 version tables FAGLFLEXT and CSSS . i have some doubts report index is the cause for this or any other reasons can any one help me in this regard,
    thanks in advance
    sasidhar.A

    Hi,
    just create a proper index and performance will increase. There are some SAP OSS notes who deal with this (for example field "client" should be added if'm not mistaken).
    We did the same on profit center tables with huge performance increases
    grtz
    dries

  • Problem in Exporting a Report Group having a Report Painter Report.

    I am having a problem in exporting a Report group having a Report Painter report.When I am trying to export the Report Group using transaction GR57 with all dependent objects,it is displaying:
           group 0102CPDNUEA-CCROSI not transported.
           Transport groups separately if necessary.
    There are 6 such groups which are not transported.Can anybody help me in this regards.Can anybody help me in exporting these Groups.Specifically in Report painter reports what do these Groups signify and how can we see them.Please help me....

    hi,
    I am able to export my report groups with dependent objects successfully.
    I dont know why you are getting error message. Just keep break point at ***** and execute it for single group and find out why it is giving error.
      IF SY-BATCH = 'X' OR NO_LIST = 'X'.  "direct or batch
        SET PF-STATUS 'LIST'.
    *****PERFORM TRANSPORT_OBJS USING 'X'.  "transport all jobs
        IF FILE_EXP <> 'X'.
          READ TABLE WT_E071 INDEX 1.
          IF SY-SUBRC = 0.
            LEAVE.
          ENDIF.
        ENDIF.
      ELSE.                                "online
        SET PF-STATUS 'MENU'.
       PERFORM WRITE_TRANSP_OBJS.
      ENDIF.
    regards,
    ram

  • Issues in Report Painter Reports

    Dear All,
    We are on ECC 6.0. We are using some Report Painter Reports and we are facing the following 2 issues:
    1. Authorization
    For some of the Profitability Reports, we are facing authorization issues. e.g. If I do not need a user to view the profitiability of a particular Business Area to which he does not belong to then I should be able to restrict the same via authorization. However, I do not know where to maintain such authorization objects in Report Painter Reports
    2. Financial Statement Version
    We have created a Cash Flow Statement by using the Report Painter. We have created a Form whereby we have assigned GL Accounts to some characteristics and Financial Statement Version Item to others. However, when we execute the report, we can see figures for only those items where we assigned the GL Accounts and not for those items where we assigned FSV Items.
    Thanks,
    Shalin Shah

    Hi,
    1: search SAPNET with search terms "report painter, authorization", guess you find some useful notes.
    2: Try T-code KE5B to convert Financial Statement Verison sets to sets that can be used in report painter.
    Best regards, Christian

  • Line Items missing in report painter report..

    Hi guri's,
    Iam uisng customized  P&L report painter report using with library 1VK....in this report some line items are not shwoing..... how to solve it...
    regars
    JK

    After you've create a P&L report using the report painter, you would also have to create line item reports for example 'Receiver- Profit Center Line Items'  and then assign these line items reports under 'Report/Report Interface' in the P&L report.
    How to do this:
    1. After creating the line item report(s),  use transaction code GR52 which is for change report group. Enter the P&L report group and click enter.
    2. Under 'Report/Report Interface', click on 'configure' under assigned report to library.
    3. In the pop-up screen, click on the green plus sign "Insert Row"
    4. Another screen will pop-up. Enter the report group for the line items report and enter.
    5. Save
    6. Regenerate your report group. After regeneration, execute.
    7. Drill-down in the displayed P&L report to the line items.
    Don't hestitate to ask for further clarifications.
    Elias

  • Selection values in Report Painter Report

    Hi All,
    I am creating a report  painter report for Plan/Actual values using  library 0FL.In my characteristic value column I included fiscal year as a  value and  hard coded the fiscal year so i dont need this parameter in my selction screen.When I execute the report the fiscal year is coming in the selection twice.i.e:
    Fiscal Year
    Fiscal  Year
    Company Code
    Period
    From Profit Center
    To Profit Center
    How do I wipe out this fiscal year from my selection screen? In GRR2 -> EDIT--> General data selection , I only have  profit center values.I dont  know why this fiscal year is coming up as a selction parameter when I hard coded in the column.Any help.Thanks
    Regards
    Shaun

    HI Shaun
    In GRR2, Against the char, there is a check box where in you specify to treat it as a variable.. DId you check that box? Unless you check that, it wont appear in the selection screen
    Regards
    Ajay M

  • Selection screen fields order in report painter report..

    hi experts,
    i have a  problem with selection screen fields order in report painter report.
    Actually in report painter report selection screen order is different compare to report writer report selection screen.
    how should i get the same selection screen fields order For  Report painter  report compare to Report Writer report ?
    For example, Report Writer selection screen order is:
      ledger:
      company code:
      period:
      current fiscal year:
      previous fiscal yer:
      previous quarter end period:
    where as Report Painter selection screen order is:
      ledger:
      previous fis year:
      current fis year:
      company code:
      period:
      previous quarter end period:
    please help me regarding with this.
    Thanks and Regards,
      NAGARJUNA.

    hi nagarjun,
    Go to Sq01, select the query and goto to change mode.go to the next screens till u reach Selection fields. Here u enter the NO field in the sequence which u want ot appear in the selection screen and it is done. Save and execute.
    Ex:
    Selection fields No
    Exclude Cancelled Lots 5
    Material number 1
    Plant 2
    Material type 3
    Inspection Lot Origin 4
    Regards,
    Lokesh

  • Issue with Report painter report

    Hi Gurus
    I need your help with an issue with one of our report painter reports. I have created a new report with Fiscal Year, Ledger, Company code, and Account number range in General data selection. The report row has field Segment and each period corresponds to one period of the fscal year. In here, I have selected Period and Record type 0 as characteristics. The basic key figure is KSL for second currency.
    I am able to save the report but when I execute it, I get the error that
    *Characteristic GJAHR cannot be combined with key figures*
    Can someone please help me as why I am getting this error?
    I appreciate your help.
    Thanks,
    Shalu

    Hi
    I think you have to rechek the genral data selection setting , related to fiscal year.
    had u defaulted the fiscal year or used variant for fiscal year
    Thanks
    alok

  • Transaction Codes for Report Painter Reports

    Hi,
    Can any bodu assist on how can we create a link for the report painter report and the transaction code for the same.
    Also is there somthing to be taken care while getting the same transported to another client.
    Thanks & Regards,
    Ankur Goel

    Hi,
    Thanks for response.
    Actually I created the Transaction code and get the Report and Transaction code transported but when i executed the transaction code in the Receiver Client i gave run time ABAP error.
    let me give example:
    a) I created the Library, Report Group & Report in my Developement Client.
    b) Using SE93 i assigned the program name of the Report to transaction code.
    c) Got the Library, Report Group, Report & T.code transported to Quality Client.
    d) Executed the transaction code in QAS which gave me error.
    Reason identified:
    a) Let say Program name created for the report is AAXGHGYGBL010 in my client 010.
    b) Transaction code ZREPORT01 created using SE93 for program AAXGHGYGBL010.
    c) Now got the Library, Report Group, Report & T.code transported to Quality Client 050.
    d) In client 050 program AAXGHGYGBL010 doesnot exist as AAXGHGYGBL050 has been created for the transported Report.
    Thanks & Regards,
    Ankur Goel

  • Schedule Report Painter Report

    I need to schedule a Report Painter Report (relating to Profit center groups) to send the report daily to a list of users thro' mail.
    How to achieve this task?
    Please give me step by step procedure. Will award points.

    Hi,
    When you are executing a Job, it may be online or batch processing definitely a report output will come.
    You need a report painter when you need to modify various elements, characteristics and Values as per
    the client requirement.  You can well take the help of an ABAP consultant to modify the existing report to a Z Report or create a Userdefined TCode to generate the required report directly.
    Sadashivan

  • Period in report painter report

    Hi Experts,
    I use a report painter report where certain variables are used.
    In report, I have two columns. First column shows details of current period and second column shows immediate prior period.
    Say 1st column shows details of period 2, 2011 then 2nd column shows period 1, 2011.
    Here, the problem I am facing is, if I execute for period 1, 2011 u2013 I expect period 1 of 2011 in column 1 and period 12, 2010 in column 2 u2013 but in 2nd column, instead of period 12, it shows heading as period u20180u2019 and no details are displayed. This is happening only if I execute for period 1. From period 2 onwards its fine.
    The variables I used in column 1 and 2 are
    Column 1
         Fiscal year : Variable u2018ZYEARu2019
         Period : ZPERTO
    Column 2
         Fiscal year : Variable u2018ZYEARu2019
         Period : ZPERT-1
    Details of formula variables
    ZYEAR: From field (GLPCT- RYEAR) with formula (IF '#S006' = 1 THEN '#S001' - 1 ELSE '#S001')
    ZPERTO: From field (GLPCT- RPMAX) with formula (IF '#S006' = 1 THEN 12 ELSE '#S006' u2013 1)
    ZPERT-1: From field (GLPCT- RPMAX) with formula ('ZPERTO' -1), also Internal variable check box is checked in this variable.
    Could someone explain me how to solve this. I would like to se the system right with minimum changes because these variables are used in some other reports too. So would like to make the thing possible with minimum changes.
    Thanks.

    Hi,
    Create 2 more variables and use this formula.
    Variable 1: ZYEAR (Fiscal Year) RYEAR u2192 '#S001'
    Variable 2: ZPERT (Period) RPMAX u2192 '#S002'
    Variable 3: ZPERT-1 (Period -1) RPMAX
    IF 'ZPERT' > 1 THEN 'ZPERT' - 1
           ELSE 12
    Variable 4: ZYEAR-1(Year for Period-1) RYEAR
    IF 'ZPERT-1' < 'ZPERT' THEN 'ZYEAR'
                                        ELSE 'ZYEAR' - 1
    Use the Variables
    1.ZYEAR & 2.ZPERT for Current Month.
    3.ZYEAR-1 & 2.ZPERT-1 for Previous Month.
    Hope it solves your problem.
    ~Andrew

  • Attaching a Transaction Code to Report Painter Report

    Hi All
    After creating a report painter report in GRR2 ... I tried to attach it to a transaction code in SE93...
    But am not able to do so?
    Is this possible and if so how is it done?
    Thank you
    Rukshana

    I assume that you were copying the report/program from one environment to the next? DEV->QA->PRD
    Using the Elias' example above, for program name, ensure that the last portion of it coincides with the environment in which you are executing the transaction code.
    GP4FGHMLN5Z2Q5MDAN2A89TGV1K010.
    Notice the '010'? Is that the client number for the environment in which you wish to run this program?
    If your PRD environment is for example, client 100, then you will need to change the t-code to point appropriately to the program for that client. In this case (using my example), the program name to be referenced by the t-code would be:
    GP4FGHMLN5Z2Q5MDAN2A89TGV1K100.
    Try that out. If all else fails, if you have access to t-code SE38, search for your program name (except for the last portion, etc.) with a wildcard (*). If you find the program, run it to make sure that this is what you were expecting. Now that you have the correct program name, use that in SE93 for your t-code.

Maybe you are looking for