Execute RMAN Backup in debugmode
Hi
We are running RMAN Backup using perl script.
We need to run the RMAN backp in debug mode. How we can do this by passing parameter in the perl script itself.
PS. As we dont need to change the perl script or editing the RMAN script.
Thanks
I don't know how your script is being executed, but you could pass in the debug parameter with the command you use to launch RMAN:
rman target / debug trace='c:\bk_trace.trc'
Similar Messages
-
Can RMAN backup and export datapump executed at the same time?
Hello,
I have several databases that I backup using RMAN and export datapump everynight starting at 6PM and end at Midnight. The backup maintenance window doesn't give me enough time for each database to run at different time. I am using crontab to schedule my backups. Since I have so many databases that need to be backed up between 6PM - Midnight, some of the export and RMAN backup scripts will execute almost at the same time. My question is can my export data pump and RMAN backup scripts run at the same time?
Thank you in advance.
JohnNeeds must. If you don't run expdp parallel then it doesn't use that much. If it was really killing the system then look into setting up a Resource plan that knocks that user down but this is a big step.
I woud better look into using Rman
system incrementals, and block change tracking, to minimize your RMAN time.
Regards
If your shop needs to do both simultaneously then go for it.
Chris.
PS : One of my shops has maybe 20-30 rmans and pumps all kicking off some simultaneous, some not, from 0000 to 0130. No complaints from users and no problems either. Go for it.
Edited by: Chris Slattery on Nov 25, 2012 11:19 PM -
Error , ORA-19809 & ORA-19804 While restoring RMAN backup .
Hi Experts,
I am restoring production RMAN backup to UAT . Using below steps
1)rman target=/
2)RMAN> startup nomount;
3) RMAN> restore controlfile from '/orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl';
Starting restore at 05-AUG-10
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=3 device type=DISK
channel ORA_DISK_1: copied control file copy
output file name=+DATA_ACME/acme/controlfile/current.256.724845209
output file name=+DATA_ACME/acme/controlfile/current.257.724845209
Finished restore at 05-AUG-10
4) RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
5) RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME/%F';
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME1/current/%F';
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME/%F';
new RMAN configuration parameters are successfully stored
6) RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
old RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
new RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
new RMAN configuration parameters are successfully stored
released channel: ORA_DISK_1
7) RMAN> CATALOG START WITH '/orabkdump/Rman_Bak/ACME';
searching for all files that match the pattern /orabkdump/Rman_Bak/ACME
List of Files Unknown to the Database
=====================================
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347594_1_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347939_2_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348365_3_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348681_4_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722349076_5_1
File Name: /orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl
File Name: /orabkdump/Rman_Bak/ACME/c-1904932673-20100622-00
File Name: /orabkdump/Rman_Bak/ACME/dbsnap.log
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.log
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.trc
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347594_1_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347939_2_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348365_3_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348681_4_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722349076_5_1
File Name: /orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl
File Name: /orabkdump/Rman_Bak/ACME/c-1904932673-20100622-00
List of Files Which Where Not Cataloged
=======================================
File Name: /orabkdump/Rman_Bak/ACME/dbsnap.log
RMAN-07517: Reason: The file header is corrupted
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.log
RMAN-07517: Reason: The file header is corrupted
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.trc
RMAN-07517: Reason: The file header is corrupted
8) RMAN> run {
2> set until sequence 1789 thread 2;
3> restore database;
4> recover database;
5> sql 'alter database open resetlogs';
6> }
executing command: SET until clause
Starting restore at 06-AUG-10
using channel ORA_DISK_1
Finished restore at 06-AUG-10
Starting recover at 06-AUG-10
using channel ORA_DISK_1
starting media recovery
channel ORA_DISK_1: starting archived log restore to default destination
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=2803
channel ORA_DISK_1: restoring archived log
archived log thread=2 sequence=6051
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=2804
channel ORA_DISK_1: reading from backup piece /orabkdump/Rman_Bak/ACME/ACME_AL_726286927_57_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/06/2010 23:10:38
ORA-19870: error while restoring backup piece /orabkdump/Rman_Bak/ACME/ACME_AL_726286927_57_1
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 49283072 bytes disk space from 5218762752 limit
** My UAT database should be in noarchival mode . Generally such errors have been observed during backup , but have no clue why they occurred during recovery .Please advice .
Thanks
Edited by: user11981514 on Aug 6, 2010 9:46 AMHi,
Since the error ORA-19809 indicates the lack of space in flash recovery area during the media recovery, I suggested increasing the value of the parameter DB_RECOVERY_FILE_DEST_SIZE.
Yes, during the media recovery the RMAN will restore the archived log to the default destination (only if the required archived logs are not already on the disks).You can confirm the restore location of the archived log in RMAN restore log/destination specified by parameters log_archive_dest_1/db_recovery_file_dest.
Regards,
Vaibhav -
Restore spfile from rman backup ---- error.
Hi,
I am trying to execute recovery on new machine ...
I have done the following steps..
I have one database as ora10g2 as peroduction database on one machine as hosta
I have created a catalog on another machine cora10g2 (hostb)
I have taken a full backup from hosta as per following ...
the following command execute from hosta machine.
$ rman target sys/<passwd>@ora10g2 catalog rman/rman@cora10g2 ...
Backup completed ...
Now I am trying to restore this backup on hostb machine where i have already rman catlog database ..
I have done the following setting ...on host b
set oracle_sid=DUP
and execute following command ...
rman target / catalog rman/rman@cora10g2
RMAN> set dbid 2760732370
executing command: SET DBID
database name is "BAAN10G2" and DBID is 2760732370
RMAN>
RMAN>
RMAN> startup force nomount ;
startup failed: ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/oracle/dbs/baan10g2/dbs/initbaan10g2.ora'
starting Oracle instance without parameter file for retrival of spfile
Oracle instance started
Total System Global Area 159383552 bytes
Fixed Size 1977112 bytes
Variable Size 67114216 bytes
Database Buffers 83886080 bytes
Redo Buffers 6406144 bytes
RMAN>
RMAN>
RMAN>
RMAN> show all ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/rman/backup/control/cntrl_%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 4 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/baanora3/rman/ora10g2/bkup_db_%d_s%s_P%p_t%t' MAXPIECESIZE 1024;
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
RMAN>
RMAN>
RMAN> list backup of spfile ;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
2420 Full 7.33M DISK 00:00:01 14-JUN-07
BP Key: 2426 Status: AVAILABLE Compressed: NO Tag: TAG20070614T182935
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070614-00
SPFILE Included: Modification time: 14-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2509 Full 7.33M DISK 00:00:01 15-JUN-07
BP Key: 2515 Status: AVAILABLE Compressed: NO Tag: TAG20070615T130416
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070615-00
SPFILE Included: Modification time: 15-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2694 Full 7.33M DISK 00:00:01 15-JUN-07
BP Key: 2739 Status: AVAILABLE Compressed: NO Tag: TAG20070615T131703
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070615-01
SPFILE Included: Modification time: 15-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2760 Full 80.00K DISK 00:00:01 15-JUN-07
BP Key: 2763 Status: AVAILABLE Compressed: NO Tag: TAG20070615T163437
Piece Name: /rman/spfile/spfile.ora
SPFILE Included: Modification time: 15-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2769 Full 7.33M DISK 00:00:02 15-JUN-07
BP Key: 2771 Status: AVAILABLE Compressed: NO Tag: TAG20070615T163441
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070615-02
SPFILE Included: Modification time: 15-JUN-07
RMAN>
RMAN>
RMAN> restore spfile from autobackup ;
Starting restore at 19-JUN-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=36 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=35 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=34 devtype=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid=33 devtype=DISK
channel ORA_DISK_1: looking for autobackup on day: 20070619
channel ORA_DISK_1: looking for autobackup on day: 20070618
channel ORA_DISK_1: looking for autobackup on day: 20070617
channel ORA_DISK_1: looking for autobackup on day: 20070616
channel ORA_DISK_1: looking for autobackup on day: 20070615
channel ORA_DISK_1: looking for autobackup on day: 20070614
channel ORA_DISK_1: looking for autobackup on day: 20070613
channel ORA_DISK_1: no autobackup in 7 days found
channel ORA_DISK_2: looking for autobackup on day: 20070619
channel ORA_DISK_2: looking for autobackup on day: 20070618
channel ORA_DISK_2: looking for autobackup on day: 20070617
channel ORA_DISK_2: looking for autobackup on day: 20070616
channel ORA_DISK_2: looking for autobackup on day: 20070615
channel ORA_DISK_2: looking for autobackup on day: 20070614
channel ORA_DISK_2: looking for autobackup on day: 20070613
channel ORA_DISK_2: no autobackup in 7 days found
channel ORA_DISK_3: looking for autobackup on day: 20070619
channel ORA_DISK_3: looking for autobackup on day: 20070618
channel ORA_DISK_3: looking for autobackup on day: 20070617
channel ORA_DISK_3: looking for autobackup on day: 20070616
channel ORA_DISK_3: looking for autobackup on day: 20070615
channel ORA_DISK_3: looking for autobackup on day: 20070614
channel ORA_DISK_3: looking for autobackup on day: 20070613
channel ORA_DISK_3: no autobackup in 7 days found
channel ORA_DISK_4: looking for autobackup on day: 20070619
channel ORA_DISK_4: looking for autobackup on day: 20070618
channel ORA_DISK_4: looking for autobackup on day: 20070617
channel ORA_DISK_4: looking for autobackup on day: 20070616
channel ORA_DISK_4: looking for autobackup on day: 20070615
channel ORA_DISK_4: looking for autobackup on day: 20070614
channel ORA_DISK_4: looking for autobackup on day: 20070613
channel ORA_DISK_4: no autobackup in 7 days found
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 06/19/2007 18:00:13
RMAN-06172: no autobackup found or specified handle is not a valid copy or piece
RMAN>
I am not able to restore spfile from rman backup ;;;Hi,
I would like to know few things
1. How are you setting the db_name ? you can set db_id at RMAN, how are you setting the db_name ?
2. Do you have any default init file at default location ? if yes, is the db_name parameter set correctly in that file ?
Since spfile is yet to be restored, you must set the db_name parameter correctly before you start spfile restore.This can be done with init file at default location which can even contain just one paremeter i.e db_name. -
How to find out when last rman backup was made in 9i
Hello,
i have an oracle 9i database running on windows here. Is there a way to find out when the last rman backup was done with a sql query?
I would like to create a job inside the database that regulary checks if a rman backup ran sucessfully instead of using scripts in the operating system.
But i only know about commands in the rman utility (that i can not execute as a job, right?) - is something similar possible with for example sqlplus?Hello,
this gives some results, but none of the views begins with RC:
ALL_DIM_HIERARCHIES
ALL_SOURCE
ALL_SOURCE_TABLES
ALL_SOURCE_TAB_COLUMNS
DBA_DIM_HIERARCHIES
DBA_RCHILD
DBA_REGISTRY_HIERARCHY
DBA_RSRC_CONSUMER_GROUPS
DBA_RSRC_CONSUMER_GROUP_PRIVS
DBA_RSRC_MANAGER_SYSTEM_PRIVS
DBA_RSRC_PLANS
DBA_RSRC_PLAN_DIRECTIVES
DBA_SOURCE
DBA_SOURCE_TABLES
DBA_SOURCE_TAB_COLUMNS
USER_DIM_HIERARCHIES
USER_RESOURCE_LIMITS
USER_RSRC_CONSUMER_GROUP_PRIVS
USER_RSRC_MANAGER_SYSTEM_PRIVS
USER_SOURCE
Edited by: user590072 on 22.06.2010 05:49 -
Problem in recovery from RMAN backup in case of disk failure
Hi
I have Oracle 9.2.0.1.0 on Windows. Full Hot RMAN backup of database is scheduled on daily basis. I am taking backup on disks. And then i do manually copy them on tapes. If any disk failure occurs than can i recover database completely in this scenario. If tried restoing that backup on different machine as given below
set ORACLE_SID=<name>
rman target sys/<pwd>@ORACLE_SID nocatalog
startup nomount
restore spfile
create pfile from spfile
startup nomount pfile
alter database mount
restore database
Everything worked fine till above steps. Now i will execute last step.
recover database
Here it gives error:-RMAN-06054: media recovery requesting unknown log: thread 1 scn 264750
Still i typed
alter database open resetlogs
Now i can open my database, But is it recovered completely? Or there is loss of some data? Why it is giving this error?
Thanks in advance. Waiting for reply.I can understand the confusion with this whole concept.
What I meant by all archivelogs is all the archivelogs that were backed up with the backup itself. Again, it is essential to ensure that you archive the current redo log AFTER the backup is performed and then back those archivelogs too. Good thing is, RMAN will take care of this for you if you backup the archivelogs with the BACKUP DATABASE command and/or backup the archivelogs AFTER you run the BACKUP DATABASE command.
Once you've mounted the controlfile and CATALOG the archivelogs, you can go into SQL*Plus and issue the following query:
select SEQUENCE#, FIRST_CHANGE#, NEXT_CHANGE# from v$archived_log
order by FIRST_TIME;This will tell you what archivelog is the latest. Logs generated during the backup may also provide the necessary information. Performing Disaster Recovery should help to understand the full process.
The ONLINELOG directory in FRA is only populated if you've configured your redo logs to be stored there. However, you are on 9i...right? If so 9i doesn't utilize a FRA.
HTH
Edited by: ebrian on Oct 3, 2008 1:08 PM -
RMAN backup files are still exist since long time, how to delete?
Dear sir;
I'm using the below script to do daily backup, however there are many rman backup files are still exist and consumes HD size, how could I delete these files in daily bases? some files dated in FEB, MAR, APR,
============Daily RMAN script=========
rman target /<<!
backup incremental level=0 as compressed backupset database format '/u15/rman/full_backup_%U.rman';
backup archivelog all not backed up 2 times format '/u15/rman/arc_backup_%U.rman';
backup current controlfile format '/u15/rman/control_%U.rman';
delete archivelog all backed up 2 times to device type disk completed before 'sysdate-7';
delete noprompt obsolete;
================================END
Thanks and best regards
AliHi;
Our backup policy should have 7 days; however we have here some files from JAN, FEB,MAR, APR /2012 WHICH ARE BEYOND THE RETENTION DATE and these files should be deleted by executing " delete noprompt obsolete; ".
All files are exist in /u15/rman/
-rw-r----- 1 oracle oinstall 1151763968 Jan 21 01:36 arc_backup_7kn19h4a_1_1.rman
-rw-r----- 1 oracle oinstall 1136882176 Jan 21 01:36 arc_backup_7ln19h4q_1_1.rman
-rw-r----- 1 oracle oinstall 1135984640 Jan 21 01:36 arc_backup_7mn19h5a_1_1.rman
-rw-r----- 1 oracle oinstall 1126627328 Jan 21 01:37 arc_backup_7nn19h5q_1_1.rman
-rw-r----- 1 oracle oinstall 880606720 Mar 12 02:53 arc_backup_7nn5ldhp_1_1.rman
-rw-r----- 1 oracle oinstall 1093043712 Jan 21 01:37 arc_backup_7on19h6a_1_1.rman
-rw-r----- 1 oracle oinstall 9797632 Dec 15 01:04 control_04mu7tcp_1_1.rman
-rw-r----- 1 oracle oinstall 36896768 Mar 3 02:55 control_4cn4tm9k_1_1.rman
-rw-r----- 1 oracle oinstall 36896768 Mar 4 02:53 control_4on50ahm_1_1.rman
-rw-r----- 1 oracle oinstall 36896768 Mar 5 02:55 control_56n52v1j_1_1.rman
-rw-r----- 1 oracle oinstall 16252928 Jan 23 01:40 control_8tn1eq3t_1_1.rman
-rw-r----- 1 oracle oinstall 16252928 Jan 24 01:40 control_9cn1heg0_1_1.rman
-rw-r----- 1 oracle oinstall 202940416 Dec 15 01:04 full_backup_01mu7t50_1_1.rman
-rw-r----- 1 oracle oinstall 1097728 Dec 15 01:04 full_backup_02mu7tcc_1_1.rman
-rw-r----- 1 oracle oinstall 201285632 Dec 14 01:04 full_backup_0nmu58ou_1_1.rman
-rw-r----- 1 oracle oinstall 5957304320 Feb 29 02:46 full_backup_2ln4g9l1_1_1.rman
-rw-r----- 1 oracle oinstall 4128768 Feb 29 02:47 full_backup_2mn4gft8_1_1.rman
-rw-r----- 1 oracle oinstall 6027075584 Mar 1 02:49 full_backup_32n4o6ov_1_1.rman
-rw-r----- 1 oracle oinstall 4128768 Mar 1 02:49 full_backup_33n4od66_1_1.rman
-rw-r----- 1 oracle oinstall 6187171840 Mar 2 02:51 full_backup_3gn4qr50_1_1.rman
-rw-r----- 1 oracle oinstall 4145152 Mar 2 02:51 full_backup_3hn4r1kn_1_1.rman
-rw-r----- 1 oracle oinstall 6115786752 Mar 3 02:51 full_backup_40n4tfgu_1_1.rman
above is a short list of contents.
to do our daily backup we perform the following script (in daily)
==================
backup incremental level=0 as compressed backupset database format '/u15/rman/full_backup_%U.rman';
backup archivelog all not backed up 2 times format '/u15/rman/arc_backup_%U.rman';
backup current controlfile format '/u15/rman/control_%U.rman';
delete archivelog all backed up 2 times to device type disk completed before 'sysdate-7';
delete noprompt obsolete;
==================
Thanks and best regards
Ali -
RMAN Backup error:ORA-04030: out of process memory
Hi,
Our RMAN backup is failing with below error:
===========================
RMAN-03002: failure of backup plus archivelog command at 05/22/2010 05:31:33
ORA-04030: out of process memory when trying to allocate 82444 bytes (pga heap,control file i/o buffer)
=============================
Please suggest
Thanks and RegardsWe upgrade our catalog database(Linux) to 10.2.0.4 and our target database is 10.2.0.3(Windows),
we executed upgrade catalog twice and then when we again tried to execute the below command
rman sys/syspwd@targetdb catalog rman/rman@rmancat
Recovery Manager: Release 10.2.0.4.0 - Production on Sat May 22 15:10:36 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.03 in TARGET database is not current
PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.03 in TARGET database is not current
connected to target database: WEBCT (DBID=3699379059)
connected to recovery catalog database
RMAN>
=======================
Still we are getting this error
and our backup falied with below errors:
======================
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.03 in TARGET database is not current PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.03 in TARGET database is not current connected to target database: WEBCT (DBID=3699379059) connected to recovery catalog database
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup plus archivelog command at 05/22/2010 15:09:44
ORA-06550: line 1, column 14:
PLS-00306: wrong number or types of arguments in call to 'VALIDATEARCHIVEDLOG'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
==========================
Please suggest -
Hi,
I've get an error when backuping whole database (8.1.7, Linux, Redhat 7.1).
Help me, please!
RMAN> startup mount pfile=/u/app/oracle/admin/learn/pfile/initlearn.ora;
RMAN-06193: connected to target database (not started)
RMAN-06196: Oracle instance started
RMAN-06199: database mounted
Total System Global Area 177922208 bytes
Fixed Size 73888 bytes
Variable Size 54796288 bytes
Database Buffers 122880000 bytes
Redo Buffers 172032 bytes
RMAN> run {
2> allocate channel ch1 type disk;
3> backup database;
4> }
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: ch1
RMAN-08500: channel ch1: sid=13 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-03023: executing command: backup
RMAN-08008: channel ch1: starting full datafile backupset
RMAN-08502: set_count=6 set_stamp=478373111 creation_time=19-NOV-02
RMAN-08010: channel ch1: specifying datafile(s) in backupset
RMAN-08522: input datafile fno=00001 name=/u/oradata/learn/system01.dbf
RMAN-08011: including current controlfile in backupset
RMAN-08522: input datafile fno=00005 name=/u/oradata/learn/users01.dbf
RMAN-08522: input datafile fno=00006 name=/u/oradata/learn/users02.dbf
RMAN-08522: input datafile fno=00007 name=/u/oradata/learn/idx01.dbf
RMAN-08522: input datafile fno=00008 name=/u/oradata/learn/idx02.dbf
RMAN-08522: input datafile fno=00003 name=/u/oradata/learn/rbs01.dbf
RMAN-08522: input datafile fno=00004 name=/u/oradata/learn/temp01.dbf
RMAN-08522: input datafile fno=00009 name=/u/oradata/learn/part01.dbf
RMAN-08522: input datafile fno=00002 name=/u/oradata/learn/tools01.dbf
RMAN-08522: input datafile fno=00010 name=/u/oradata/learn/cc01.dbf
RMAN-08522: input datafile fno=00012 name=/u/oradata/learn/tests01.dbf
RMAN-08522: input datafile fno=00011 name=/u/oradata/learn/ccindx01.dbf
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03007: retryable error occurred during execution of command: backup
RMAN-07004: unhandled exception during command execution on channel ch1
RMAN-10035: exception raised in RPC: ORA-19504: failed to create file "06e86p7n_1_1"
ORA-27044: unable to write the header block of file
Linux Error: 22: Invalid argument
Additional information: 2
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATEYou must set format of backup when using disk channel
either set fommat='/filesystem_path/%U.bck' in channel
command or in backup command
/Jonas -
RMAN backup and restore for Disaster Recovery
Hi Guys,
I am very new to Oracle and have a question about RMAN backup and restore feature. I am simulating a disaster recovery scenario by having two VMs running oracle 11g, say hosta and hostb, hosta is sort of production db and the other a disaster recovery db (one that will be made primary when disaster occurs). My goal is to backup production db using RMAN and restore it on the other machine. For some reason when I restore the db on hostb, the command restores the previous backup but not the most recent one e.g. I took a backup yesterday (09/20) and applied it to the hostb that worked fine, but when I try to apply a fresh backup from today (09/21) it always picks up the old backup. Here's a dump of the screen:
Starting restore at 21-SEP-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to /oracle/app/dev/oradata/forums/s
ystem01.dbf
channel ORA_DISK_1: restoring datafile 00002 to /oracle/app/dev/oradata/forums/s
ysaux01.dbf
channel ORA_DISK_1: restoring datafile 00003 to /oracle/app/dev/oradata/forums/u
ndotbs01.dbf
channel ORA_DISK_1: restoring datafile 00004 to /oracle/app/dev/oradata/forums/u
sers01.dbf
channel ORA_DISK_1: reading from backup piece /oracle/app/dev/flash_recovery_are
a/FORUMS/backupset/o1_mf_nnnd0_TAG20110920T040950_77jx3zk7_.bkp
channel ORA_DISK_1: piece handle=/oracle/app/dev/flash_recovery_area/FORUMS/back
upset/o1_mf_nnnd0_TAG20110920T040950_77jx3zk7_.bkp tag=TAG20110920T040950
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:01:05
Finished restore at 21-SEP-11
Notice that it reads the backup piece from this location /oracle/app/dev/flash_recovery_are
a/FORUMS/backupset/
whereas my latest backups are stored at a different location.
I am executing following steps at the RMAN prompt on hosta and hostb:
hosta (production site)
backup as compressed backupset database plus archivelog
backup current controlfile format'/oracle/oracle_bkup/ctl_%U'
backup spfile
hostb (Disaster site)
set dbid=13732232063
startup force nomount
restore spfile to '/oracle/app/dev/product/11.2.0/dbhome_1/dbs/spfileforums.ora' from '/export/home/dev/restore_db/backupset/2011_09_21/o1_mf_nnsnf_TAG20110921T114945_77ndg9ys_.bkp'
shutdown immediate
/* create a init<db_name>.ora file with SPFILE= /oracle/app/dev/product/11.2.0/dbhome_1/dbs/spfileforums.ora */
startup force pfile='/export/home/dev/restore_db/initforums.ora' nomount
restore controlfile from '/export/home/dev/restore_db/backupset/2011_09_21/ctl_1hmn3mic_1_1'
/* restart rman here */
quit
alter database mount;
catalog start with '/export/home/dev/restore_db/backupset/2011_09_21' noprompt;
/* call the next two commands on run */
restore database;
recover database;
alter database open resetlogs
quit
Any help will be greatly appreciated.
Thanks,
RajeshThanks guys, I really appreciate all your help here. I redid everything all over again to get all the information you guys wanted. Since I noticed that more eyes are looking into this I am going to reiterate my steps one more time followed by specific answers to questions. My first backup on Host B is located under ..../restore_db/backupset whereas the subsequent one is under .../restore_db/backupset/backupset2.
I take backup on Host A using:
rman target /
backup as compressed backupset database plus archivelog;
backup spfile;
quit;
I restore the backup on Host B using:
set dbid=13732232063;
startup force nomount;
restore spfile to '/oracle/app/dev/product/11.2.0/dbhome_1/dbs/spfileforums.ora' from '/export/home/dev/restore_db/backupset/o1_mf_nnsnf_TAG20110928T171830_787gbpxh_.bkp'
shutdown immediate;
startup force nomount;
restore controlfile from '/export/home/dev/restore_db/backupset/o1_mf_ncsnf_TAG20110928T171638_787gbkxn_.bkp'
quit;
/* restart rman here */
alter database mount;
catalog start with '/export/home/dev/restore_db/backupset' noprompt;
restore database;
recover database;
alter database open resetlogs;
quit;
I take another backup on Host A using (notice no spfile backup this time):
backup as compressed backupset database plus archivelog;
quit;
I restore the database on Host B using:
alter database mount;
catalog start with '/export/home/dev/restore_db/backupset/backupset2' noprompt;
recover database;
alter database open;
quit;
Output of List Backup of database (I have done this after I recovered the second time, also note that it is referring to backupset2 which is were my second backup is stored)
RMAN> list backup of database;
using target database control file instead of recovery catalog
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
89 Full 261.87M DISK 00:01:37 28-SEP-11
BP Key: 91 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171638
Piece Name: /export/home/dev/restore_db/backupset/o1_mf_nnndf_TAG2011092
8T171638_787g77rx_.bkp
List of Datafiles in backup set 89
File LV Type Ckp SCN Ckp Time Name
1 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/system01.dbf
2 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/sysaux01.dbf
3 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/undotbs01.dbf
4 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/users01.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
97 Full 259.16M DISK 00:00:00 28-SEP-11
BP Key: 100 Status: AVAILABLE Compressed: YES Tag: TAG20110928T18352
7
Piece Name: /export/home/dev/restore_db/backupset/backupset2/o1_mf_nnndf
TAG20110928T183527787lv0nb_.bkp
List of Datafiles in backup set 97
File LV Type Ckp SCN Ckp Time Name
1 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/system01.dbf
2 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/sysaux01.dbf
3 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/undotbs01.dbf
4 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/users01.dbf
Output of list backup (done after restoring the control file)
RMAN> list backup;
BS Key Size Device Type Elapsed Time Completion Time
87 89.20M DISK 00:00:26 28-SEP-11
BP Key: 87 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171526
Piece Name: /oracle/app/dev/flash_recovery_area/FORUMS/backupset/2011_09
_28/o1_mf_annnn_TAG20110928T171526_787g50bm_.bkp
List of Archived Logs in backup set 87
Thrd Seq Low SCN Low Time Next SCN Next Time
1 34 1302253 20-SEP-11 1306439 20-SEP-11
1 35 1306439 20-SEP-11 1307647 20-SEP-11
1 36 1307647 20-SEP-11 1307701 20-SEP-11
1 37 1307701 20-SEP-11 1311393 20-SEP-11
1 38 1311393 20-SEP-11 1311511 20-SEP-11
1 39 1311511 20-SEP-11 1332479 20-SEP-11
1 40 1332479 20-SEP-11 1344418 20-SEP-11
1 41 1344418 20-SEP-11 1350409 20-SEP-11
1 42 1350409 20-SEP-11 1350449 20-SEP-11
1 43 1350449 20-SEP-11 1350854 21-SEP-11
1 44 1350854 21-SEP-11 1350895 21-SEP-11
1 45 1350895 21-SEP-11 1353114 21-SEP-11
1 46 1353114 21-SEP-11 1353254 21-SEP-11
1 47 1353254 21-SEP-11 1353865 21-SEP-11
1 48 1353865 21-SEP-11 1353988 21-SEP-11
1 49 1353988 21-SEP-11 1375403 21-SEP-11
1 50 1375403 21-SEP-11 1376149 21-SEP-11
1 51 1376149 21-SEP-11 1376206 21-SEP-11
1 52 1376206 21-SEP-11 1376246 21-SEP-11
1 53 1376246 21-SEP-11 1379990 21-SEP-11
1 54 1379990 21-SEP-11 1380229 21-SEP-11
1 55 1380229 21-SEP-11 1380266 21-SEP-11
1 56 1380266 21-SEP-11 1380528 21-SEP-11
1 57 1380528 21-SEP-11 1380724 21-SEP-11
1 58 1380724 21-SEP-11 1380861 21-SEP-11
1 59 1380861 21-SEP-11 1381033 21-SEP-11
1 60 1381033 21-SEP-11 1381077 21-SEP-11
1 61 1381077 21-SEP-11 1402243 22-SEP-11
1 62 1402243 22-SEP-11 1423341 22-SEP-11
1 63 1423341 22-SEP-11 1435456 22-SEP-11
1 64 1435456 22-SEP-11 1454415 23-SEP-11
1 65 1454415 23-SEP-11 1490903 23-SEP-11
1 66 1490903 23-SEP-11 1491266 23-SEP-11
1 67 1491266 23-SEP-11 1491347 23-SEP-11
1 68 1491347 23-SEP-11 1492761 23-SEP-11
1 69 1492761 23-SEP-11 1492891 23-SEP-11
1 70 1492891 23-SEP-11 1493678 23-SEP-11
1 71 1493678 23-SEP-11 1493704 23-SEP-11
1 72 1493704 23-SEP-11 1494741 23-SEP-11
1 73 1494741 23-SEP-11 1494790 23-SEP-11
1 74 1494790 23-SEP-11 1510154 23-SEP-11
1 75 1510154 23-SEP-11 1514286 23-SEP-11
1 76 1514286 23-SEP-11 1531967 24-SEP-11
1 77 1531967 24-SEP-11 1543266 24-SEP-11
1 78 1543266 24-SEP-11 1558427 24-SEP-11
1 79 1558427 24-SEP-11 1566924 24-SEP-11
1 80 1566924 24-SEP-11 1578292 24-SEP-11
1 81 1578292 24-SEP-11 1596894 25-SEP-11
BS Key Size Device Type Elapsed Time Completion Time
88 84.03M DISK 00:00:30 28-SEP-11
BP Key: 88 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171526
Piece Name: /oracle/app/dev/flash_recovery_area/FORUMS/backupset/2011_09
_28/o1_mf_annnn_TAG20110928T171526_787g63s9_.bkp
List of Archived Logs in backup set 88
Thrd Seq Low SCN Low Time Next SCN Next Time
1 82 1596894 25-SEP-11 1609028 25-SEP-11
1 83 1609028 25-SEP-11 1622303 25-SEP-11
1 84 1622303 25-SEP-11 1626430 25-SEP-11
1 85 1626430 25-SEP-11 1634486 25-SEP-11
1 86 1634486 25-SEP-11 1648398 25-SEP-11
1 87 1648398 25-SEP-11 1669259 26-SEP-11
1 88 1669259 26-SEP-11 1686820 26-SEP-11
1 89 1686820 26-SEP-11 1686959 26-SEP-11
1 90 1686959 26-SEP-11 1689168 26-SEP-11
1 91 1689168 26-SEP-11 1704759 26-SEP-11
1 92 1704759 26-SEP-11 1719597 27-SEP-11
1 93 1719597 27-SEP-11 1740407 27-SEP-11
1 94 1740407 27-SEP-11 1750125 27-SEP-11
1 95 1750125 27-SEP-11 1765592 27-SEP-11
1 96 1765592 27-SEP-11 1781498 28-SEP-11
1 97 1781498 28-SEP-11 1802311 28-SEP-11
1 98 1802311 28-SEP-11 1811009 28-SEP-11
1 99 1811009 28-SEP-11 1813811 28-SEP-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
89 Full 261.87M DISK 00:01:37 28-SEP-11
BP Key: 89 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171638
Piece Name: /oracle/app/dev/flash_recovery_area/FORUMS/backupset/2011_09
_28/o1_mf_nnndf_TAG20110928T171638_787g77rx_.bkp
List of Datafiles in backup set 89
File LV Type Ckp SCN Ckp Time Name
1 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/system01.dbf
2 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/sysaux01.dbf
3 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/undotbs01.dbf
4 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/users01.dbf -
hi guru's
please tell me the answeres..for this
what will happen if we re run the Rman backup due to the job failure...will take a new backup from the begining? or will start from the first backup end where it left ?
i am deleting some archieved logs on the archieved destination before takeing the RMAN backup, and then running rman backup ...then any error will raised for the missing files during Rman archive log backup for missing files? i have the files like 1 to 10 ...in that 5 and 6 logs are deleted before takeing the Rman backup..how to resolve this?user13014926 wrote:
hi guru's
please tell me the answeres..for this
what will happen if we re run the Rman backup due to the job failure...will take a new backup from the begining? or will start from the first backup end where it left ?
You can continue backup from which files not backed up and this is call restartable backup.Please refer below link
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmconc1.htm#i1008543
>
i am deleting some archieved logs on the archieved destination before takeing the RMAN backup, and then running rman backup ...then any error will raised for the missing files during Rman archive log backup for missing files? i have the files like 1 to 10 ...in that 5 and 6 logs are deleted before takeing the Rman backup..how to resolve this?If you manually delete archivelogs then you will get an error so before executing this backup command you have to execute CROSSCHECK ARCHIVELOG ALL and DELETE EXPIRED ARCHIVELOG ALL then your problem will solve. -
Restoring Rman backup on New Host with different directory structure
Hi,
I have a following scenario to clone the database.
1. clone the database on new server
2. source is non - ASM and target is ASM
3. On source incremental level 0 backup taken on disk connecting to catalog, the backup is moved to target host to different directory structure
4. source is running on 32-bit Linux two node Rac and Target is running on 64-bit Linux two node Rac
I did the following steps and getting below error:
1. I copied incremental Level 0 backup to target server(where we need to build new db) to different directory structure
2. On target i created pfile and build the instance, as dbf file are in multiple locations in source i put following tow parameters in init.ora of target database
*.db_file_name_convert =(/u02/oradata/app1p/,+QADATA2/udev/datafile),(/u03/oradata/app1p/,+QADATA1/udev/datafile),(/u12/oradata/app1p/,+QADATA1/udev/datafile,),(/u99/oradata/app1p/,+QADATA1/udev/datafile),(/u09/oradata/app1p/,+QADATA1/udev/datafile),(/u14/oradata/app1p/,+QADATA1/udev/datafile),(/u07/oradata/app1p/,+QADATA1/udev/datafile),(/u06/oradata/prod/,+QADATA1/udev/datafile'),(/u05/oradata/app1p/,+QADATA1/udev/datafile)
*.log_file_name_convert =("/u99/oradata/app1p/","+QADATA2/udev/onlinelog/")
3. connected to rman -->> started db in nomount -->> restored the controlfile --> cataloged the backup piece and then i am trying to restore
All the above steps i did using the Doc id *How To Restore Rman Backups On A Different Node When The Directory Structures Are Different [ID 419137.1]*
script i am using is :
RMAN> run {
2> set until time "to_date('DEC/20/2010 05:30:00','Mon/DD/YYYY HH24:MI:SS')";
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> allocate channel c3 device type disk;
6> allocate channel c4 device type disk;
7> set newname for datafile 1 to '+QADATA1/UDEV/DATAFILE';
8> set newname for datafile 2 to '+QADATA1/UDEV/DATAFILE';
9> set newname for datafile 3 to '+QADATA1/UDEV/DATAFILE';
10> set newname for datafile 4 to '+QADATA1/UDEV/DATAFILE';
11> set newname for datafile 5 to '+QADATA1/UDEV/DATAFILE';
12> set newname for datafile 6 to '+QADATA1/UDEV/DATAFILE';
13> set newname for datafile 54 to '+QADATA1/UDEV/DATAFILE';
set newname for datafile 63 to '+QADATA1/UDEV/DATAFILE';
14> 15> set newname for datafile 67 to '+QADATA1/UDEV/DATAFILE';
16> set newname for datafile 68 to '+QADATA1/UDEV/DATAFILE';
17> set newname for datafile 50 to '+QADATA1/UDEV/DATAFILE';
18> set newname for datafile 39 to '+QADATA1/UDEV/DATAFILE';
19> set newname for datafile 38 to '+QADATA1/UDEV/DATAFILE';
20> set newname for datafile 7 to '+QADATA1/UDEV/DATAFILE';
21> set newname for datafile 9 to '+QADATA1/UDEV/DATAFILE';
22> set newname for datafile 8 to '+QADATA1/UDEV/DATAFILE';
23> set newname for datafile 11 to '+QADATA1/UDEV/DATAFILE';
24> set newname for datafile 10 to '+QADATA1/UDEV/DATAFILE';
25> set newname for datafile 66 to '+QADATA1/UDEV/DATAFILE';
26> set newname for datafile 48 to '+QADATA1/UDEV/DATAFILE';
27> set newname for datafile 47 to '+QADATA1/UDEV/DATAFILE';
28> set newname for datafile 12 to '+QADATA1/UDEV/DATAFILE';
29> set newname for datafile 13 to '+QADATA1/UDEV/DATAFILE';
30> set newname for datafile 14 to '+QADATA1/UDEV/DATAFILE';
31> set newname for datafile 15 to '+QADATA1/UDEV/DATAFILE';
32> set newname for datafile 16 to '+QADATA1/UDEV/DATAFILE';
33> set newname for datafile 18 to '+QADATA1/UDEV/DATAFILE';
34> set newname for datafile 17 to '+QADATA1/UDEV/DATAFILE';
35> set newname for datafile 19 to '+QADATA1/UDEV/DATAFILE';
36> set newname for datafile 69 to '+QADATA1/UDEV/DATAFILE';
37> set newname for datafile 60 to '+QADATA1/UDEV/DATAFILE';
38> set newname for datafile 59 to '+QADATA1/UDEV/DATAFILE';
39> set newname for datafile 55 to '+QADATA1/UDEV/DATAFILE';
40> set newname for datafile 53 to '+QADATA1/UDEV/DATAFILE';
41> set newname for datafile 44 to '+QADATA1/UDEV/DATAFILE';
set newname for datafile 22 to '+QADATA2/UDEV/DATAFILE';
42> 43> set newname for datafile 21 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 20 to '+QADATA2/UDEV/DATAFILE';
44> 45> set newname for datafile 72 to '+QADATA2/UDEV/DATAFILE';
46> set newname for datafile 70 to '+QADATA2/UDEV/DATAFILE';
47> set newname for datafile 65 to '+QADATA2/UDEV/DATAFILE';
48> set newname for datafile 64 to '+QADATA2/UDEV/DATAFILE';
49> set newname for datafile 57 to '+QADATA2/UDEV/DATAFILE';
50> set newname for datafile 56 to '+QADATA2/UDEV/DATAFILE';
51> set newname for datafile 49 to '+QADATA2/UDEV/DATAFILE';
52> set newname for datafile 45 to '+QADATA2/UDEV/DATAFILE';
53> set newname for datafile 26 to '+QADATA2/UDEV/DATAFILE';
54> set newname for datafile 25 to '+QADATA2/UDEV/DATAFILE';
55> set newname for datafile 24 to '+QADATA2/UDEV/DATAFILE';
56> set newname for datafile 23 to '+QADATA2/UDEV/DATAFILE';
57> set newname for datafile 27 to '+QADATA2/UDEV/DATAFILE';
58> set newname for datafile 28 to '+QADATA2/UDEV/DATAFILE';
59> set newname for datafile 29 to '+QADATA2/UDEV/DATAFILE';
60> set newname for datafile 30 to '+QADATA2/UDEV/DATAFILE';
61> set newname for datafile 73 to '+QADATA2/UDEV/DATAFILE';
62> set newname for datafile 32 to '+QADATA2/UDEV/DATAFILE';
63> set newname for datafile 31 to '+QADATA2/UDEV/DATAFILE';
64> set newname for datafile 34 to '+QADATA2/UDEV/DATAFILE';
65> set newname for datafile 33 to '+QADATA2/UDEV/DATAFILE';
66> set newname for datafile 35 to '+QADATA2/UDEV/DATAFILE';
67> set newname for datafile 36 to '+QADATA2/UDEV/DATAFILE';
68> set newname for datafile 37 to '+QADATA2/UDEV/DATAFILE';
69> set newname for datafile 51 to '+QADATA2/UDEV/DATAFILE';
70> set newname for datafile 43 to '+QADATA2/UDEV/DATAFILE';
71> set newname for datafile 40 to '+QADATA2/UDEV/DATAFILE';
72> set newname for datafile 41 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 71 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 58 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 52 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 46 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 42 to '+QADATA2/UDEV/DATAFILE';
73> 74> 75> 76> 77> 78> set newname for datafile 62 to '+QADATA2/UDEV/DATAFILE';
79> set newname for datafile 61 to '+QADATA2/UDEV/DATAFILE';
80> set newname for datafile 74 to '+QADATA2/UDEV/DATAFILE';
81> restore database;
82> switch datafile all;
83> recover database;
84> alter database open resetlogs;
85>
86> release channel c1;
87> release channel c2;
88> release channel c3;
89> release channel c4;
90> }
Getting the following error, copied lines from the error i am getting.
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 27-DEC-10
released channel: c1
released channel: c2
released channel: c3
released channel: c4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/27/2010 08:09:08
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 74
RMAN-06100: no channel to restore a backup or copy of datafile 73
Please advice...
Thanks,
Tanveer MohammedIf you would like, please refer the link:-
http://gavinsoorma.com/2010/04/creating-an-asm-duplicate-database-from-a-non-asm-database/ -
Create a database from 8i RMAN backup
Hi,
I am in need to recover some historic data from a historic database's RMAN backup.
The situation is ... I have one old RMAN backup of a 8i database which includes datafiles, archivellog files and control files. Init.ora file is also available.
I have installed the 8i software in a host and created the oracle service through ORADIM and pwd file through ORAPWD utility. Then copied the init.ora file under 'C:\Oracle\ADMIN\ORCL\PFILE' and the RMAN backup files under 'C:\Oracle\Ora81\DATABASE' folder.
Now I can start the instance with the init.ora file but can not mount as control files are not there. when I try to restore the control files through RMAN as...
RMAN> run
2> {
3> restore controlfile;
4> }
RMAN-03022: compiling command: restore
RMAN-03022: compiling command: IRESTORE
RMAN-03026: error recovery releasing channel resources
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: restore
RMAN-03002: failure during compilation of command
RMAN-03013: command type: IRESTORE
RMAN-06172: not connected to recovery catalog database
RMAN>
Now without the catalog database how can I restore the control files and the database from the RMAN backup?
I think the old RMAN metadata was stored in catalog database.
Any suggestion please?
regardsSorry I wrongly said that I do not have the DBID, I have DBID but I have controlfile backup as RMAN backupset, not in Binary. So even if I set DBID, RMAN asks for the catalog database, which is not available.
As I worked...
C:\>rman
Recovery Manager: Release 8.1.5.0.0 - Production
RMAN> SET DBID=1208994555
RMAN-03022: compiling command: CSET
RMAN> connect target sys/*****
RMAN-06193: connected to target database (not started)
RMAN> startup nomount
RMAN-06196: Oracle instance started
Total System Global Area 552011724 bytes
Fixed Size 65484 bytes
Variable Size 69357568 bytes
Database Buffers 482514944 bytes
Redo Buffers 73728 bytes
RMAN> run
2> {
3> allocate channel ch1 type disk;
4> restore controlfile;
5> alter database mount;
6> }
RMAN-03022: compiling command: allocate
RMAN-03026: error recovery releasing channel resources
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: allocate
RMAN-06172: not connected to recovery catalog database
RMAN> shutdown
RMAN-06402: Oracle instance shut down
RMAN> set dbid 1208994555
RMAN-03022: compiling command: CSET
RMAN> connect target sys/*** nocatalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01005: syntax error: found "nocatalog": expecting one of: "newline, ;"
RMAN-01007: at line 1 column 27 file: standard input
RMAN> connect target sys/**** nocatalog;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01005: syntax error: found "nocatalog": expecting one of: "newline, ;"
RMAN-01007: at line 1 column 27 file: standard input
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01005: syntax error: found ";": expecting one of: "allocate, alter, beginli
ne, catalog, change, connect, create, crosscheck, debug, delete, drop, exit, end
inline, host, {, library, list, mount, open, print, register, release, replace,
report, reset, resync, rman, rpctest, run, set, sql, "
RMAN-01007: at line 1 column 36 file: standard input
RMAN> exit
Recovery Manager complete.
C:\>rman target sys/**** nocatalog
Recovery Manager: Release 8.1.5.0.0 - Production
RMAN-06193: connected to target database (not started)
RMAN> run{
2> allocate channel ch1 type disk;
3> restore controlfile;
4> alter database mount;
5> }
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: ch1
RMAN-08500: channel ch1: sid=12 devtype=DISK
RMAN-03022: compiling command: restore
RMAN-03022: compiling command: IRESTORE
RMAN-03026: error recovery releasing channel resources
RMAN-08031: released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: restore
RMAN-03002: failure during compilation of command
RMAN-03013: command type: IRESTORE
RMAN-06003: ORACLE error from target database: ORA-01507: database not mounted
ORA-06512: at "SYS.X$DBMS_RCVMAN", line 923
ORA-06512: at line 1
RMAN-06097: text of failing SQL statement: begin dbms_rcvman . setDatabase ( upp
er ( :dbname:dbname_i ) , :rlscn , :rltime , :fhdbi:fhdbi_i ) ; end ;
RMAN> -
Taking rman backup from a different server
HI Al,
Is it possible for us run the rman backup from a different server other than the server on which database exist .
For Ex :
Our database is on server X
But , I want to schedulde the archive backup from the server Y .
How can we do this and is it possible ...
Regds
Rahul GuptaYes, as long the RMAN executable is compatible to the target database, on metalink:
RMAN Compatibility Matrix
Doc ID: 73431.1
rman sys/<password>@<connect_string>
Werner -
Restoring RMAN backup on a different server
Hi oracle gurus
i have following scenario
i have a compressed backup set of a database
i want to restore that rman backup on to a different server.
both the server have same version of oracle.and both the server are of 32 bit.
please reply if any more info is required.RESTORE AND RECOVERY PROCEDURE OF PRODUCTION DATABASE BACKUP ON TEST SERVERS
As part of disaster recovery exercise or to test the validity of a RMAN backup, a full restore and recovery of databases can be performed on scratch or test servers utilising the production RMAN backups which have been restored from the tape backups on these test or scratch servers.
This note will illustrate the above procedure by detailing the steps required to restore the backup of a production database (prod1) on a test server linux01 .
The following assumptions are made in this note:
The RMAN backups have been restored from tape backups to the same backup location on the test server as the production server where the backup was originally taken
The identical directory structure as is present on production has been created on the test server. This will apply to not only the location of the database files (data, control files, redo log files), but also to the bdump,cdump, udump and adump locations.
Controlfile autobackup has been enabled. This is important.
Overview
Restore the spfile from the autobackup
Restore the controlfile from the autobackup
Restore the data files
Recover by applying archived redo log files
Open the database with resetlogs
Restore the SPFILE
[oracle@linux01 prod1]$ rman target /
connected to target database (not started)
RMAN> set dbid=4266928631
executing command: SET DBID
RMAN> startup force nomount;
startup failed: ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/10.2.0/dbs/initprod1.ora'
starting Oracle instance without parameter file for retrival of spfile
Oracle instance started
Total System Global Area 159383552 bytes
Fixed Size 2039056 bytes
Variable Size 67109616 bytes
Database Buffers 83886080 bytes
Redo Buffers 6348800 bytes
RMAN> run
2> {SET CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u02/backup/prod1/%F';
3> restore spfile from autobackup;
4> }
RMAN> shutdown immediate;
Restore the Control File
In this case, the instance is now being started with the restored spfile. We can create a pfile as well from this spfile is so required.
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
RMAN> set dbid=4266928631
executing command: SET DBID
RMAN> run
2> {SET CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u02/backup/prod1/%F';
3> restore controlfile from autobackup;
4> }
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
Restore the database
RMAN> restore database;
Recover the database
The recovery will fail at a point where it cannot restore any more archived redo log files.
In this case the last archived log file which has been backed up is sequence 613.
This information can be obtained by issuing a LIST BACKUP OF ARCHIVELOG ALL command.
So RMAN will fail when it tries to apply sequence 614 ….
RMAN> recover database
[oracle@linux01 PROD1]$ rman target /
connected to target database: PROD1 (DBID=4266928631, not open)
RMAN> sql 'alter database open resetlogs';
RMAN>
reference: http://gavinsoorma.com/recovery-scenarios/
Maybe you are looking for
-
The business scenario is that a handling fee needs to be added to the entire sales order, if the order is over a minimum order value. This minimum order value and the handling fee can vary from customer to customer. This suggests that the condition n
-
Can I use RS.exe to create the folders in Sharepoint-Integrated Reporting service?
Hello All, Recently, I am using rs.exe and .rss files to publish my reports to SharePoint-Integrated Reporting Service. The outstanding issue is, it cannot create non-existing folders for me automatically. I have to created the folder manually. Think
-
Whatsapp opens and then closes right away
I downloaded Whatsapp after several tries (at first I had the problem several people describe of payment declined notifications). It worked for a few days and now I can see the indicator showing that I have messages (and friends have told me they sen
-
Safari Flash and Silverlight problem.
I have two large problems on safari. 1. Flash: Whenever I play flash, the CPU jumps up to 100+, and then it doesn't come down until I close down the video. I have everything updated, and this didn't occur when I first got my macbook. Does anyone have
-
Phone Hangs when Turning on...
I have a very strange problem with my 8900. A few weeks ago I turned my phone on first thing in the morning, and noticed it wasn't booting up. It had the ticking clock icon working away...I figured it was doing updates or something, so I left it. 1