Execute sql task case statement

hi
select increment = case when len(max(id) = 1
then "0000" + max(id)
when len(max(id)) = 2 then "000"+ max(id)
end
from filesequence
i am getting error incorrect syntax near then
how to use above code properly

no
i am tying to append header in my ssis package using script task.
footer is working fine , ia m talking about header.
here is the code.
Dim fileContents As New StringBuilder()
Dim vars As Variables
'Dim cudate As String
Dim finalFile As String
'cudate = Dts.Variables("CurentDate").Value.ToString()
Dts.VariableDispenser.LockForRead("FinalFile")
Dts.VariableDispenser.GetVariables(vars)
finalFile = CType(vars("FinalFile").Value, String)
vars.Unlock()
'Write header, then append file contents and write back out.
'fileContents.AppendLine(String.Format("HBPFACT"))
'fileContents.AppendLine(Dts.Variables("CurrentDate").Value.ToString())
fileContents.Append("HBPFACT" & Dts.Variables("increment").Value.ToString)
'Dts.Variables("CurrentDate").Value.ToString())
fileContents.AppendLine()
fileContents.Append(File.ReadAllText(Dts.Connections("Destination").ConnectionString))
File.WriteAllText(finalFile, fileContents.ToString())
Dts.TaskResult = ScriptResults.Success
here increment is the variable(varchar) i have taken value and passing it as a read only.
ia m getting exception error

Similar Messages

Multiple Select statements in EXECUTE SQL TASK in SSIS

Can we write multiple select statements in execute sql task(SSIS).
If possible how to assign them to variables in result statement

Hi ,
You can use below steps to set result set to variable.
1.In the Execute SQL Task Editor dialog box, on the General page, select the Single row, Full result set, or XML result set type(According to your result set).
2.Click Result Set.
3.To add a result set mapping, click Add.
4.From the Variables Name list, select a variable or create a new variable.
What is multiple selection ? May be below can be used in your scenario !
http://stackoverflow.com/questions/17698908/how-to-set-multiple-ssis-variables-in-sql-task
What you want to achieve ?
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

Passing the same input parameter twise in execute sql task

Hi All, I want to insert some values to 3 different tables in sql server. Execute sql task is used to populate three tables. Here is the sql statement.
DECLARE @Dt AS DATE
SET @Dt = ?
INSERT INTO TABLE1 SELECT ?, COL2, COL3 FROM TABLE_A
INSERT INTO TABLE2 SELECT ?, COL2, COL3 FROM TABLE_B
Input parameter is mapped as follows :
Variable name : User::EffectiveDate
Direction : Input Data Type :
Date Parameter name :0
Parameter size :-1
User::EffectiveDate is datetime variable.
When the package is executed, it throws an error.
[Execute SQL Task] Error: Executing the query " " failed with the following error: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.". Possible failure reasons: Problems
with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. I am not sure what I am doing wrong here. If anyone could point me to the right direction, I really appreciate.
Thanks
shamen

To expand on the other answers.
Your SQL command
DECLARE @Dt AS DATE
SET @Dt = ?
INSERT INTO TABLE1 SELECT ?, COL2, COL3 FROM TABLE_A
INSERT INTO TABLE2 SELECT ?, COL2, COL3 FROM TABLE_B
It using 3 input variables. I assume you didn't pass 3 variables and you want @DT to be column 1 in each. In that case you would use:
DECLARE @Dt AS DATE
SET @Dt = ?
INSERT INTO TABLE1 SELECT @Dt, COL2, COL3 FROM TABLE_A
INSERT INTO TABLE2 SELECT @Dt, COL2, COL3 FROM TABLE_B

Execute SQL task for Email ToLine using COALESCE and two variables

Hello...
I am converting an old DTS package to SSIS. The old package consist of mostly ActiveX Script so I am breaking it down into steps. Basically... I am retreving a set of records that need to be sent via email to multiple people. In my package to create
my ToLine for the Send Mail Task I am using several steps. Frist I am using:
SELECT CASE
          WHEN EXISTS ( SELECT        users.User_EmailAddress
FROM            dbo.Errors INNER JOIN
                         dbo.Users ON users.user_id = Errors.MonitorAuditor_User_Id
WHERE        ([Audit_Id] = ?) AND ([ErrorCode_Id] = ?) ) THEN
             1
          ELSE
             0
       END AS ValidEventID
I use this to see if there is any records to create my email string. This works fine. After this I have a Script Task that splits my pipe in two. When no records exist (User::ValidEventID == 0) I am loging that event to a log. When records do exist
I am using another Execute SQL task to create the actual ToLine:
Declare @combinedString VARCHAR(max)
SELECT      @combinedString = COALESCE(@combinedString + ', ', '') + Users.User_EmailAddress
FROM            dbo.Errors INNER JOIN
                         dbo.Users ON users.user_id = Errors.MonitorAuditor_User_Id
WHERE        ([Audit_Id] = ?) AND ([ErrorCode_Id] = ?)
SELECT convert(varchar(4000),@combinedString) as StringValue
I have my resultSet set to Single Row. I have two variables coming if for the Audit_Id and ErrorCode_Id. My Result Set is set to a Variable: User::EmailAddressString.
Next it goes through a foreach loop to map to the ToLine email variable that I created named User:User_EmailAddress.
Then I am using that in my Send Email Task.
It all works fine when I hard code my variables into the COALESCE statement but as soon as I replace that with the ? that SSIS requires for variables I am getting the following error:
[Execute SQL Task] Error: Executing the query "Declare @combinedString VARCHAR(max)
SELECT      ..." failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,
parameters not set correctly, or connection not established correctly.
I have tried changing my resultset property, I have checked my paramenters and my connection. I don't understand why it works fine when I have my varaiables hard coded but not when I change them to the ?.
Thanks in advance for you help in this matter.
Reach for the unknown!

Katherine... that did not work.
What I ended up doing was taking out the forloop all together. In my Execute SQL Task I changed the result set from single row to XML. I took out the COALESCE statement and just went for something more basic:
select users.User_EmailAddress + ';' as User_EmailAddress from Errors inner join users on users.user_id = Errors.MonitorAuditor_User_Id WHERE ([Audit_Id] = ? AND [ErrorCode_Id] = ?)
Currently I am just logging the string to a text file so I can see the results. In my text file the string is surrounded by <ROOT></ROOT>. So I will next I will work on triming that off the string and then populate my Send Mail Task.
This is how I trimed off the <ROOT></ROOT>:
Dts.Variables(
"EmailAddressString").Value = Replace(Dts.Variables("EmailAddressString").Value,
"<ROOT>",
Dts.Variables(
"EmailAddressString").Value = Replace(Dts.Variables("EmailAddressString").Value,
";</ROOT>",
Thanks again everyone for the help!
Reach for the unknown!

How do I return two values from a stored procedure into an "Execute SQL Task" within SQL Server 2008 R2

Hi,
How do I return two values from a
stored procedure into an "Execute SQL Task" please? Each of these two values need to be populated into an SSIS variable for later processing, e.g. StartDate and EndDate.
Thinking about stored procedure output parameters for example. Is there anything special I need to bear in mind to ensure that the SSIS variables are populated with the updated stored procedure output parameter values?
Something like ?
CREATE PROCEDURE [etl].[ConvertPeriodToStartAndEndDate]
@intPeriod INT,
@strPeriod_Length NVARCHAR(1),
@dtStart NVARCHAR(8) OUTPUT,
@dtEnd NVARCHAR(8) OUTPUT
AS
then within the SSIS component; -
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Below execute statement should work along the parameter mapping which you have provided. Also try specifying the parameter size property as default.
Exec [etl].[ConvertPeriodToStartAndEndDate] ?,?,? output, ? output
Add a script task to check ssis variables values using,
Msgbox(Dts.Variables("User::strExtractStartDate").Value)
Do not forget to add the property "readOnlyVariables" as strExtractStartDate variable to check for only one variable.
Regards, RSingh

[Forum FAQ] How do I send multiple rows returned by Execute SQL Task as Email content in SQL Server Integration Services?

Question:
There is a scenario that users want to send multiple rows returned by Execute SQL Task as Email content to send to someone. With Execute SQL Task, the Full result set is used when the query returns multiple rows, it must map to a variable of the Object data
type, then the return result is a rowset object, so we cannot directly send the result variable as Email content. Is there a way that we can extract the table row values that are stored in the Object variable as Email content to send to someone?
Answer:
To achieve this requirement, we can use a Foreach Loop container to extract the table row values that are stored in the Object variable into package variables, then use a Script Task to write the data stored in packages variables to a variable, and then set
the variable as MessageSource in the Send Mail Task.
Add four variables in the package as below:
Double-click the Execute SQL Task to open the Execute SQL Task Editor, then change the ResultSet property to “Full result set”. Assuming that the SQL Statement like below:
SELECT   Category, CntRecords
FROM         [table_name]
In the Result Set pane, add a result like below (please note that we must use 0 as the result set name when the result set type is Full result set):
Drag a Foreach Loop Container connects to the Execute SQL Task.
Double-click the Foreach Loop Container to open the Foreach Loop Editor, in the Collection tab, change the Enumerator to Foreach ADO Enumerator, then select User:result as ADO object source variable.
Click the Variable Mappings pane, add two Variables as below:
Drag a Script Task within the Foreach Loop Container.
The C# code that can be used only in SSIS 2008 and above in Script Task as below:
public void Main()
   // TODO: Add your code here
            Variables varCollection = null;
            string message = string.Empty;
            Dts.VariableDispenser.LockForWrite("User::Message");
            Dts.VariableDispenser.LockForWrite("User::Category");
            Dts.VariableDispenser.LockForWrite("User::CntRecords");
            Dts.VariableDispenser.GetVariables(ref varCollection);
            //Format the query result with tab delimiters
            message = string.Format("{0}\t{1}\n",
                                        varCollection["User::Category"].Value,
                                        varCollection["User::CntRecords"].Value
           varCollection["User::Message"].Value = varCollection["User::Message"].Value + message;
           Dts.TaskResult = (int)ScriptResults.Success;
The VB code that can be used only in SSIS 2005 and above in Script Task as below, please note that in SSIS 2005, we should
change PrecompileScriptIntoBinaryCode property to False and Run64BitRuntime property to False
Public Sub Main()
        ' Add your code here
        Dim varCollection As Variables = Nothing
        Dim message As String = String.Empty
        Dts.VariableDispenser.LockForWrite("User::Message")
        Dts.VariableDispenser.LockForWrite("User::Category")
        Dts.VariableDispenser.LockForWrite("User::CntRecords")
        Dts.VariableDispenser.GetVariables(varCollection)
        'Format the query result with tab delimiters
        message = String.Format("{0}" & vbTab & "{1}" & vbLf, varCollection("User::Category").Value, varCollection("User::CntRecords").Value)
        varCollection("User::Message").Value = DirectCast(varCollection("User::Message").Value,String) + message
        Dts.TaskResult = ScriptResults.Success
End Sub
Drag Send Mail Task to Control Flow pane and connect it to Foreach Loop Container.
Double-click the Send Mail Task to specify the appropriate settings, then in the Expressions tab, use the Message variable as the MessageSource Property as below:
The final design surface like below:
References:
Result Sets in the Execute SQL Task
Applies to:
Integration Services 2005
Integration Services 2008
Integration Services 2008 R2
Integration Services 2012
Integration Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

Same parameter multiple times in Execute SQL Task

Hi all,
i have a fairly long parametrized query that needs to be run within an Execute SQL task. It has only 2 unique parameters, but these need to be used multiple within that query. The connection is OLEDB.
ill simplify my requirement by making up an arbitrary T-SQL "where" clause that will illustrate what i need:
where
x = @param1
and y = @param1
and z > @param2
and w > @param2
moving this into an SSIS execute SQL task will require the following:
where
x = ?
and y = ?
and z > ?
and w > ?
I know i need to specify 4 parameters and remap the same variables multiple times.. like so:
User:aram1   -> 0
User:aram1   -> 1
User:aram2 -> 2
User:aram2 -> 3
isnt there a better way? i ask this because in my real task i have 2 params, each is reused 4 and 5 times respectively and it seems stupid to repeat params like this.

@ _proffy_
you can pass the same variable or value as parameter multiple times sql task.
follow the steps below.
1) type the sql query with parameters in SQL statement tab of sql task editor
2. in the parameter mapping, select the variables.
you can select the same variables more than once.
give the parameter name as 0,1,2,3..... based on variables you require.
do not forget to chooose the appropriate Datatype.
ex:
select * from table1
where a= ?
and b=?
and c= ?
parameters:
Var name               param Name
user::Var1               0
user::Var1               1
user::Var2               2
so the value becomes a=var1, b= var1 and c= var2

Using Union in Execute SQL Task

I am using the following SQL statement in an Excute SQL Task:
declare @RespAreaSubAreaID int, @UserLevelID int, @SubmittedByUserID int, @RespAreaID int, @SubAreaID int
Set @RespAreaSubAreaID = ?
Set @SubmittedByUserID = ?
Set @UserLevelID = ?
set @RespAreaID = ?
set @SubAreaID = ?
select users.User_EmailAddress + ';' As CC
from users inner join UserLevelsNotificationFrequencys on users.user_Id = UserLevelsNotificationFrequencys.User_id
where UserLevelID = @UserLevelID and RespAreaSubAreaID = @RespAreaSubAreaID and (NotificationFrequencyID = 4 and users.user_id <> @SubmittedByUserID)
union
select users.User_EmailAddress + ',' As CC
from users inner join UserLevelsNotificationFrequencys on users.user_Id = UserLevelsNotificationFrequencys.User_id
where UserLevelID = @UserLevelID and RespAreaSubAreaID = @RespAreaSubAreaID and (NotificationFrequencyID = 1)
I have my parameter mapped correctly. My results set is set to xml because I want it all in one string to use as a variable named User:CC. On the Result Set tab the result name is 0 and the variable name is User:CC. When I run my package I am getting
the error below. Can I not do a union query in the execute SQL task? I tried to not declare anything and just map to each of the variables that I am passing in the order that they are needed but that didn't work either. Thanks in advance for your help in this
matter.
[Execute SQL Task] Error: Executing the query "declare @RespAreaSubAreaID int, @NotificationID
in..." failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection
not established correctly.
Reach for the unknown!

Thank you for your reply but I am not using the Data Flow. All my work is happening on the Control Flow. I am looping through a set of records and emailing them to the correct
people. Setting my result set to XML worked for the To Line (See my earlier post Execute SQL task for Email ToLine using COALESCE and two variables) and now I am working on the CC line which is more complicated because it uses a union statement.
Reach for the unknown!

Execute SQL Task Error

I am using the following query in Execute SQL Task
SELECT CASE(SELECT COUNT(*) FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '') WHEN 0 THEN (SELECT CONVERT(VARCHAR(8), GETDATE(), 112) AS [YYYYMMDD])
ELSE
(SELECT TOP 1 [BILLING DATE] FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '')
END
In parameter Mapping i have created two parameters and in result set i choose my variable.
Result set property is Single Row.
Following is the error message i received,
[Execute SQL Task] Error: Executing the query "SELECT CASE(SELECT COUNT(*) FROM STG_APJ_APIW_DETA..." failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems
with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Sarvan

I cant see where you've named resultset. try like below to make sure resultset has the name used in resultset tab
SELECT CASE(SELECT COUNT(*) FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '') WHEN 0 THEN (SELECT CONVERT(VARCHAR(8), GETDATE(), 112))
ELSE
(SELECT TOP 1 [BILLING DATE] FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '')
END AS [Billing Date]
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Execute SQL Task - FOR XML PATH query error

I have the following query
SELECT pl.Id,
pl.StartTime,
pl.EndTime,
pl.PackageName,
pl.Computer,
pl.Operator,
CASE WHEN (CHARINDEX('stack trace', pl.ErrorDescription) > 0) Then
   SUBSTRING(pl.ErrorDescription, 0, CHARINDEX('stack trace', pl.ErrorDescription))
   ELSE
   pl.ErrorDescription
   END as ErrorDescription
ISNULL(ErrorFile,'') as ErrorFile,
'Not Applicable' as SourceSystem
FROM etl.PackageLog as pl
WHERE pl.Processed = 0
ORDER BY pl.StartTime, pl.PackageName
FOR XML PATH('Row'), ROOT(N'FieldingCounts')
in a Execute SQL Task and i get the following error:
[Execute SQL Task] Error: Executing the query "SELECT pl.Id,
pl.StartTime,
pl.EndTime,
pl.Package..." failed with the following error: "An invalid character was found in text content.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
The query execute without problem in database and in the ssis package doens't run because of the column
CASE WHEN (CHARINDEX('stack trace', pl.ErrorDescription) > 0) Then
   SUBSTRING(pl.ErrorDescription, 0, CHARINDEX('stack trace', pl.ErrorDescription))
   ELSE
   pl.ErrorDescription
   END as ErrorDescription
Any help to overcome the problem?
Thanks

Hi,
It looks like that you must be trying to set the result of the query to some variable from the Execute SQL Task. If yes, make sure that the target variable is of the correct data type where XML string can fit into. Considering that in SSIS, we have
some limit for XML strings.
Please let me know if it doesn't help.
Thanks,
Nimit

Execute SQL Task Failing

Hi there,
I have this issue with my Execute SQL Task Failing. I am trying to execute a sp using an execute sql task. The execute statement is contained in a variable (exec [sp_name] par1, par2) that I have declared at the package level. Now inside the exec sql
tak, I am calling this variable. Now when I try to execute this task, it fails and I get the following:
[Execute SQL Task] Error: Executing the query "EXEC CTL_ISRT_A 55,1" failed with the following error: "Could not find stored procedure 'CTL_ISRT_A'.". Possible failure reasons: Problems with the query, "ResultSet" property not
set correctly, parameters not set correctly, or connection not established correctly.
There is a stored procedure called "CTL_ISRT_A" in the db and I am able to execute it from SQL Server. This sp is inserting a new row in the table and it returns @@IDENTITY.
I tried setting the result set to a 'Single Row' and tried assigning the value to a variable but it didnt help. Could someone help me here?
Thanks in advance

return it as an output parameter
ie make sp like below
ALTER PROCEDURE [devdba].[M_CTL_ISRT]
@F_ID INT
, @PR_IND BIT
, @Debug bit = 0
, @IDVal int = 0 OUTPUT
AS
BEGIN
SET NOCOUNT ON
DECLARE @ErrorMsg varchar(5000)
DECLARE @USR_ID AS INT = 1;
INSERT INTO TBL_D (F_ID, PR_IND, USR_ID,CRE_DT, LAST_MODD_USR_ID, LAST_MODD_DT)
VALUES (@F_ID, @PR_IND, @USR_ID, GETDATE(), @USR_ID, GETDATE())
SELECT @IDVal= @@IDENTITY
END
Then in execute sql task call it as
EXEC devdba].[M_CTL_ISRT] ?,?,0,? OUT
then in parameter tab pass required variables and for last parameter make direction as Output and you'll get identify value stored in it.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Execute SQL Task, OLE DB, Stored Procedure, Returns unexpected value upon second run

when debugging SSIS, the "Execute SQL Task" runs a stored procedure and returns the expected value. When running the package a second time, the task returns an unexpected value. When running in VS2012 SQL editor, everything operates as expected.
Please help me debug how to get the stored proc to return the same value every time the SSIS Package is run. thanks!
Here is the sequence of events and what happens....
Look for a Positor that matches the Application, Host, and User
No matching PositorId is found, Creates new Positor row, returns that new PositorId
Use PositorId to upload some data (Every thing works)
re-run/debug the ssis pacakge
Look for a Positor that matches the Application, Host, and User
<No clue what is happening>
Returns -1 (SHOULD BE the same PositorId value returned in #2)
"Execute SQL Task" Setup: No edits to Result Set nor Expressions
"Execute SQL Task" Setup: GENERAL
"Execute SQL Task" Setup: PARAMETER MAPPING
SP called by "Execute SQL Task"
CREATE PROCEDURE [posit].[Return_PositorId]
AS
BEGIN
DECLARE @PositorId INT = [posit].[Get_PositorId]();
IF (@PositorId IS NULL)
BEGIN
DECLARE @ProcedureDesc NVARCHAR(257) = OBJECT_SCHEMA_NAME(@@PROCID) + N'.' + OBJECT_NAME(@@PROCID);
DECLARE @PositorNote NVARCHAR(348) = N'Automatically created by: ' + @ProcedureDesc;
EXECUTE @PositorId = [posit].[Insert_Positor] @PositorNote;
END;
RETURN @PositorId;
END;
Supporting SQL Objects:
CREATE FUNCTION [posit].[Get_PositorId]
RETURNS INT
AS
BEGIN
DECLARE @PositorId INT = NULL;
SELECT TOP 1
@PositorId = [p].[PO_PositorId]
FROM [posit].[PO_Positor] [p]
WHERE [p].[PO_PositorApp] = APP_NAME()
AND [p].[PO_PositorHost] = HOST_NAME()
AND [p].[PO_PositorUID] = SUSER_ID();
RETURN @PositorId;
END;
GO
CREATE PROCEDURE [posit].[Insert_Positor]
@PositorNote NVARCHAR(348) = NULL
AS
BEGIN
DECLARE @ProcedureDesc NVARCHAR(257) = OBJECT_SCHEMA_NAME(@@PROCID) + N'.' + OBJECT_NAME(@@PROCID);
SET @PositorNote = COALESCE(@PositorNote, N'Automatically created by: ' + @ProcedureDesc);
DECLARE @Id TABLE
[Id] INT NOT NULL
INSERT INTO [posit].[PO_Positor]([PO_PositorNote])
OUTPUT [INSERTED].[PO_PositorId]
INTO @Id([Id])
VALUES(@PositorNote);
RETURN (SELECT TOP 1 [Id] FROM @Id);
END;
GO
CREATE TABLE [posit].[PO_Positor]
[PO_PositorId] INT NOT NULL IDENTITY(0, 1),
[PO_PositorApp] NVARCHAR(128) NOT NULL CONSTRAINT [DF__PO_Positor_PO_PositorApp] DEFAULT(APP_NAME()),
CONSTRAINT [CL__PO_Positor_PO_PositorApp] CHECK([PO_PositorApp] <> ''),
[PO_PositorName] NVARCHAR(256) NOT NULL CONSTRAINT [DF__PO_Positor_PO_PositorName] DEFAULT(SUSER_SNAME()),
CONSTRAINT [CL__PO_Positor_PO_PositorName] CHECK([PO_PositorName] <> ''),
[PO_PositorHost] NVARCHAR(128) NOT NULL CONSTRAINT [DF__PO_Positor_PO_PositorHost] DEFAULT(HOST_NAME()),
CONSTRAINT [CL__PO_Positor_PO_PositorHost] CHECK([PO_PositorHost] <> ''),
[PO_PositorSID] VARBINARY(85) NOT NULL CONSTRAINT [DF__PO_Positor_PO_PositorSID] DEFAULT(SUSER_SID()),
[PO_PositorUID] INT NOT NULL CONSTRAINT [DF__PO_Positor_PO_PositorUID] DEFAULT(SUSER_ID()),
[PO_PositorNote] VARCHAR(348) NULL CONSTRAINT [CL__PO_Positor_PO_PositorNote] CHECK([PO_PositorNote] <> ''),
[PO_tsInserted] DATETIMEOFFSET(7) NOT NULL CONSTRAINT [DF__PO_Positor_PO_tsInserted] DEFAULT(SYSDATETIMEOFFSET()),
[PO_RowGuid] UNIQUEIDENTIFIER NOT NULL CONSTRAINT [DF__PO_Positor_PO_RowGuid] DEFAULT(NEWSEQUENTIALID()) ROWGUIDCOL,
CONSTRAINT [UX__PO_Positor_PO_RowGuid] UNIQUE NONCLUSTERED([PO_RowGuid]),
CONSTRAINT [UK__Positor] UNIQUE CLUSTERED ([PO_PositorApp] ASC, [PO_PositorHost] ASC, [PO_PositorUID] ASC),
CONSTRAINT [PK__Positor] PRIMARY KEY ([PO_PositorId] ASC)
GO
ssd

The error is in item 7: Returns -1 (SHOULD BE the same PositorId value returned in #2); but no error message is returned or thrown from SSIS.
The error message indicated referential integrity is not upheld when inserting records. This error message occurs AFTER the Execute SQL Task successfully completes; the E.SQL Task returns -1. The executed SQL code will not allow values less than 0
([PO_PositorId] INT NOT NULL IDENTITY(0, 1),)
[Platts Valid [41]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E2F.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E2F Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E2F Description:
"The INSERT statement conflicted with the FOREIGN KEY constraint "FK__PricingPlatts_Posit_PositorId". The conflict occurred in database "Pricing", table "posit.PO_Positor", column 'PO_PositorId'.".
The aforementioned FOREIGN KEY constraint is due to the value being returned by the Execute SQL Task.; therefore, the error lies in the value returned by the Execute SQL Task.

Execute SQL Task with Parameter - from DB2 to SQL Server

I am pulling data from DB2 to SQL Server.
1st Execute SQL task runs the following against DB2:
SELECT TIMESTAMP(CHAR(CURRENT_DATE - (DAY(CURRENT_DATE)-1) DAYS - 1 MONTH)) as START_MONTH
FROM SYSIBM.SYSDUMMY1;
I'm storing it as a Result Set.
Next I have a Data Flow Task. This pulls data from DB2 where the date matches the parameter.
FROM SCHEMA.TABLE t
WHERE DATE_TIME_COLUMN= ?
This works fine. Guessing, because the parameter source is DB2 and the Data Flow source is DB2.
The problem is, I want to remove existing data for the same date in the SQL table. IE, if I'm pulling March 2014 data from DB2, I want to be sure there is no March 2014 data in the SQL table. The main use is for re-runs.
So, I added another Execute SQL task after the first one that assigns the variable, and before the Data Flow Task. This runs the following statement against SQL Server:
DELETE FROM
database.dbo.table
WHERE DATE_TIME_FIELD >= ?
The package fails at the new Execute SQL Task with the following error message:
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "DELETE FROM
SBO.dbo.tblHE_MSP_FEE_BUCKETS
WHERE T..." failed with the following error: "Parameter name is unrecognized.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Task failed: Execute SQL Task
SSIS package "Load_MSP_Fee_Buckets_SQL.dtsx" finished: Success.
The program '[14240] Load_MSP_Fee_Buckets_SQL.dtsx: DTS' has exited with code 0 (0x0).
I am assuming this is something to do with the Parameter source being DB2, and trying to use against SQL?
Any suggestions on how to make this work??
Thanks,
-Al H

Parameter name is unrecognized
is the key, how come DB2 is related if it runs against SQL Server
What I think is happening you do not use the OLEDB connection to SQL Server.
Likewise, if it is ADO then the query needs to be
DELETE FROM
database.dbo.table
WHERE DATE_TIME_FIELD >= @MyDate
Arthur My Blog

Execute SQl Task Error SSIS Package

Hi all,
I`m using for each loop container in my package to grab the file name from the source path. I have created 2 vairables
FilePath and SourceFolder
I`m using execute sql task inside the container and this is my query
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date) SELECT File_name = ?,
File_Date = GetDate()
Please not the Table I am trying to insert has more columns but at this stage I dont need them.
When i execute the task I get an error
[Execute SQL Task] Error: Executing the query "
INSERT INTO [dbo].[DCA_FF_TEST] ([File_Name],[F..." failed with the following error: "The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters
not set correctly, or connection not established correctly.
Can someone point me in the right direction? Am I missing anything?
Resultset property Set to None
Parameter Mapping: Variablename: FilePath , Direction: Input, datatype : Varchar, Parametername: 0, ParameterSize: 100.
I`ve checked the connection as well it works.
FM

Did you try
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date)
SELECT ?, GetDate()
Or
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date) VALUES (?, GetDate())
A Fan of SSIS, SSRS and SSAS

Customized Execute SQL Task in SSIS

Hi,
I,m using Execute SQL Task in SSIS Package with these configuration ..
But, If SQL Statement doesn't report any record mean Query is not returning any data then this Task will be failed.
How can I assure that If there is no record is returning in query that " Execute SQL Task " should bot be executed .
Also I If I can do the same thing through other methods in SSIS, Pls response .
-Ashish

Hi Ashish,
The Execute SQL Task failed because you had set the ResultSet to “Single row”, however, the SQLStatement didn’t return any records. If you don’t want to execute this task when the query doesn’t return any records, you can use the following method:
Create a String type variable RowCnt, add another Execute SQL Task prior to this task.
In the new Execute SQL Task, input the SQLStatement as “Select Count(*) From Table”, set the ResultSet to “Single row”, and map the result set 0 to the variable RowCnt.
Join the two tasks (green line), and edit the Precedence Constraint (Green line), and set the expression to “(DT_I4)@[User::RowCnt]>0”.
Regards,
Mike Yin
TechNet Community Support

Execute sql task case statement

Similar Messages

Maybe you are looking for