Execute SQL Tasks Failing for Duplicate Syntax Between DEV and Production DB

Newbie here...be patient with me!
I added tasks to refresh two tables (delete from, insert into, update) to an SSIS project . I have them running from the WinXP scheduler. The issue:
In dev the tasks integrate and execute successfully from scheduler
In prod I can right click and execute each of the three tasks without any problem, but the same tasks cause my project to fail when executed from scheduler
Questions:
Any ideas about what I am failing to see?
How do I get a meaningful log messages from the tasks that are failing?
Thanks for your ideas...
Installed Edition: IDE Standard
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.1399.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00
Microsoft Visual Studio 2005
Version 8.0.50727.42 (RTM.050727-4200)
Microsoft .NET Framework
Version 2.0.50727
Installed Edition: IDE Standard
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.1399.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00

Newbie here...be patient with me!
I added tasks to refresh two tables (delete from, insert into, update) to an SSIS project . I have them running from the WinXP scheduler. The issue:
In dev the tasks integrate and execute successfully from scheduler
In prod I can right click and execute each of the three tasks without any problem, but the same tasks cause my project to fail when executed from scheduler
Questions:
Any ideas about what I am failing to see?
How do I get a meaningful log messages from the tasks that are failing?
If i understand correctly you are trying to run SSIS package from Window XP task scheduler. The reason for the failure may be due to permission while accessing resources required in the package. However it is difficult to suggest without
looking at the error message.
Scheduled tasks maintains a log file (Schedlgu.txt), in the c:\Windows folder. You can view the log from the Scheduled Tasks window by clicking
View Log on the Advanced menu.
The log file size is 32 kilobytes (KB), and when the file reaches its maximum size, it automatically starts to record new information at the beginning of the log file and writes over the old log file information.
Refer http://support.microsoft.com/kb/308558
http://msdn.microsoft.com/en-us/library/windows/desktop/aa383604(v=vs.85).aspx
Regards, RSingh

Similar Messages

Execute SQL Task Failing

Hi there,
I have this issue with my Execute SQL Task Failing. I am trying to execute a sp using an execute sql task. The execute statement is contained in a variable (exec [sp_name] par1, par2) that I have declared at the package level. Now inside the exec sql
tak, I am calling this variable. Now when I try to execute this task, it fails and I get the following:
[Execute SQL Task] Error: Executing the query "EXEC CTL_ISRT_A 55,1" failed with the following error: "Could not find stored procedure 'CTL_ISRT_A'.". Possible failure reasons: Problems with the query, "ResultSet" property not
set correctly, parameters not set correctly, or connection not established correctly.
There is a stored procedure called "CTL_ISRT_A" in the db and I am able to execute it from SQL Server. This sp is inserting a new row in the table and it returns @@IDENTITY.
I tried setting the result set to a 'Single Row' and tried assigning the value to a variable but it didnt help. Could someone help me here?
Thanks in advance

return it as an output parameter
ie make sp like below
ALTER PROCEDURE [devdba].[M_CTL_ISRT]
@F_ID INT
, @PR_IND BIT
, @Debug bit = 0
, @IDVal int = 0 OUTPUT
AS
BEGIN
SET NOCOUNT ON
DECLARE @ErrorMsg varchar(5000)
DECLARE @USR_ID AS INT = 1;
INSERT INTO TBL_D (F_ID, PR_IND, USR_ID,CRE_DT, LAST_MODD_USR_ID, LAST_MODD_DT)
VALUES (@F_ID, @PR_IND, @USR_ID, GETDATE(), @USR_ID, GETDATE())
SELECT @IDVal= @@IDENTITY
END
Then in execute sql task call it as
EXEC devdba].[M_CTL_ISRT] ?,?,0,? OUT
then in parameter tab pass required variables and for last parameter make direction as Output and you'll get identify value stored in it.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Execute SQL Task fails when specific column names are mentioned in Excel Query

Hi,
I have a requirement for extracting Excel data with thespecific column order. So instead of using the below query,
Select * From [Sheet1$A1:ZZ1]
I use the below one,
Select col1,
col2,
col91
From [CRM$A1:ZZ1]
So I have totally 91 columns.
I don't face any issues when i use the before query. i.e. direct select * from sheet1
But when i specify column names and do a select from the sheet it throws error as below,
[Execute SQL Task] Error: Executing the query "Select
[Col1]
From [Sheet1$..." failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not
set correctly, or connection not established correctly.
I just need to retrieve the column name alone and not any of the values to it. So when i do simple select * it gives the column names in the order of what it is been with the excel. But i do want it to be sorted in alphabetically and to retrieve the column
names.
I am not getting any proper solution for this for past 1 and a half days. May anyone of you please help me get it sorted? - Thank you!
--------------------------- Radhai Krish | Golden Age is no more far | --------------------------

Please use something like below:
SELECT F1 AS Col1, F2 AS Col2, F3 AS Col3, ...
FROM [Sheet1$A1:ZZ1]
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]

SSIS custom execute sql task : Failed with error

I am developing a custom SSIS task for running sql task. But it fails with error - I'm trying to set the resultsetbinding to be used by next task in workflow.
Error: 0xC0014054 at CustomSSISTask: Failed to lock variable "User::id" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container
during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
Error: 0xC002F210 at CustomSSISTask, Execute SQL Task: Executing the query "SELECT id FROM sysobjects WHERE name = 'sysrowsets..." failed with the following error: "Failed to lock variable "User::id" for read access with error 0xC0010001
"The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is
not being created.".
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Warning: 0x80019002 at CustomSSISTask: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: CustomSSISTask
Here is the code sample I'm trying ,
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser,
IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
MessageBox.Show("testing:");
try
// Add the SQL Task
Package package = new Package();
package.Executables.Add("STOCK:SQLTask");
Microsoft.SqlServer.Dts.Runtime.Variable variable = package.Variables.Add("id", false, "User", 0);
// Get the task host wrapper
TaskHost taskHost = package.Executables[0] as TaskHost;
// Get the task object
ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask;
// Set core properties
task.Connection = connections[0].Name;
task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'";
//task.SqlStatementSource =
// "SELECT PersonID from [AmalgaSpeedTableData].[SpeedTable].[DimPerson] where PersonIntID = '1'";
task.SqlStatementSourceType = SqlStatementSourceType.DirectInput;
// Add result set binding, map the id column to variable
IDTSResultBinding resultBinding = task.ResultSetBindings.Add();
//IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0);
resultBinding.ResultName = "variable";
resultBinding.DtsVariableName = variable.QualifiedName; //"User::id";
task.Execute(connections, variableDispenser, componentEvents, log, transaction);
catch (Exception ex)
throw new ArgumentException(ex.Message);
return DTSExecResult.Success;
It doesnt throw any exception but custom task fails.
Later I will be also using parametersetbindings to pass some input parameters to this task , since I'm stuck for out param - blocked moving ahead.
Any help would be greatly appreciated.
Thanks
Sang

Hi, could you check whether the following threads help:
http://stackoverflow.com/questions/5787621/ssis-package-failed-to-locak-variable-for-read-access-with-error-0xc0010001
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/40ee7eff-5ec1-426f-a1a8-ab85b40b51aa/error-variable-can-not-be-found-while-executing-package-from-the-net-code?forum=sqlintegrationservices
Regards, Leo

Best practice for maintaining URLs between Dev, Test, Production servers

We sometimes send order confirmations which include links to other services in requestcenter.
For example, we might use the link <href="http://#Site.URL#/myservices/navigate.do?query=orderform&sid=54>Also see these services</a>
However, the service ID (sid=54) changes between our dev, test, and production environments. Thus we need to manually go through notifications when we deploy between servers.
Any best practices out there?

Your best practice in this instance depends a bit on how much work you want to put into it at the front end and how tied to the idea of a direct link to a service you are.
If your team uses a decent build sheet and migration checklist then updating the various URL’s can just be part of the process. This is cumbersome but it’s the least “technical” solution if you want to continue using direct links.
A more technical solution would be to replace your direct links with links to a “broker page”. It’s relatively simple to create an asp page that can accept the name of the service as a parameter and then execute an SQL query against the DB to return the ServiceID, construct the appropriate link and pass the user through.
A less precise, but typically viable, option would be to use links that take advantage of the built in search query functionality. Your link might display more results than just one service but you can typically tailor your search query to narrow it down. For example:
If you have a service called Order New Laptop or Desktop and you want to provide a link that will get the user to that service you could use: http://#Site.URL#/RequestCenter/myservices/navigate.do?query=searchresult&&searchPattern=Order%20New%20Desktop%20or%20Laptop
The above would open the site and present the same results as if the user searched for “Order New Desktop or Laptop” manually. It’s not as exact as providing a direct link but it’s quick to implement, requires no special technical expertise and would be “environment agnostic”.

MRP run - misalignment for planned order between Date and Production Date

Hi All,
We've just integrated SAP for a new plant.
The MRP runs based on Routing Lead Time for Make materials instead on Material Master Lead Time, for Capacity Assessment purpose.
When requirements dates lay in the past, MRP performs forward scheduling starting from current date and properly defines Production End Date according to Routing.
By checking MD04, for the proposed Planned Order, the basic date is same as Current Date (= same as Requirement Date) instead of being same as Production Date.
It works as it if checks stil the MAterial MAster LEad time instead of Routing. In fact if I updated the LT of MM the MD04 provides the right Date.
For future requirements, the MRP works properly, by having basic dates (both start and end date) aligned with Production Dates of Planned Order.
How can I do the alignment w/o updating In House Production LT?
Thanks,
D

Hi Caetano,
we have already done this configuration in OPU5 but it doesn't provide any benefit.
Below how we configured it:
Scheduling level: Via detailed scheduling
Adjust dates: adjust basic dates, adjust dep. reqmts to operation date
For capacity scheduling: Always basic dates, dep. reqmts to operation dates
Scheduling type: Backwards.
Regards,
D.

What is the difference between Execute SQL Task and OLE DB Command

Besides the obvious, Execute SQL Task being used in Control Flow, and
OLE DB Command being used in Data Flow what is the difference between the two? Is one supposed to use
Execute SQL Task to produce a result set that then gets handed over to
Data Flow and OLE DB Command ? Everything that I have seen on
OLE DB Command is pretty much execution of a Stored Procedure with ? parameters. It seems as though I got to a point where I had to perform my data edits pretty much entirely in a Stored Procedure executed by
OLE DB Command rather than trying to use the SSIS GUI for everything. I didn't really see in any of my Google searches out there that simply used
OLE DB Command as a straight parameterized SQL against tables for editing and cleansing purposes and handling returns back from SQL Server for COUNT(*), etc..
I know I have posted multiple forums out there regarding this issue but I cannot seem to get a straight answer and some solid direction. So for now, my
Execute SQL Task gives me my editable result set and then control is handed off to
Data Flow and ultimately to my Stored Procedure executed by an
OLE DB Command which pretty much does the chunking for me and performs my data edits and handles my record anomalies through SQL Server Table data stores accordingly or sets flags accordingly if the data passes.
I welcome your thoughts and Thanks for your review and Thanks in advance for any replies and direction that anyone might provide.

Hi ITBobbyP,
OLE DB Command will always process data row by row, whereas Execute SQL task if you call a Stored Procedure it can process data in bulk. As you said, the biggest difference is that Execute SQL Task being used in Control Flow, and OLE DB Command being
used in Data Flow. They are used in different places.
Using Execute SQL Task, we can save the rowset returned from a query into a variable. The Execute SQL task can be used in combination with the Foreach Loop and For Loop containers to run multiple SQL statements. These containers implement repeating control
flows in a package and they can run the Execute SQL task repeatedly. For example, using the Foreach Loop container, a package can enumerate files in a folder and run an Execute SQL task repeatedly to execute the SQL statement stored in each file. I think this
is a big advantage for Execute SQL Task.
As to OLE DB Command, we can easily run an SQL statement for each row transformation in a data flow, then directly insert the outputs to a destination.
To sum up, there are many difference between those two components. We should make better choice based on our actual requirement.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Customized Execute SQL Task in SSIS

Hi,
I,m using Execute SQL Task in SSIS Package with these configuration ..
But, If SQL Statement doesn't report any record mean Query is not returning any data then this Task will be failed.
How can I assure that If there is no record is returning in query that " Execute SQL Task " should bot be executed .
Also I If I can do the same thing through other methods in SSIS, Pls response .
-Ashish

Hi Ashish,
The Execute SQL Task failed because you had set the ResultSet to “Single row”, however, the SQLStatement didn’t return any records. If you don’t want to execute this task when the query doesn’t return any records, you can use the following method:
Create a String type variable RowCnt, add another Execute SQL Task prior to this task.
In the new Execute SQL Task, input the SQLStatement as “Select Count(*) From Table”, set the ResultSet to “Single row”, and map the result set 0 to the variable RowCnt.
Join the two tasks (green line), and edit the Precedence Constraint (Green line), and set the expression to “(DT_I4)@[User::RowCnt]>0”.
Regards,
Mike Yin
TechNet Community Support

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

Execute SQL Task Editor: The query failed to parse. Syntax error, permission violation, or other nonspecific error.

Environment: SQL Server 2008 R2
Code:
CREATE TABLE dbo.PkgAudit
PkgAuditID INT IDENTITY(1, 1),
PackageName VARCHAR(100),
LoadTime DATETIME ,
NumberofRecords VARCHAR(50),
Status1 VARCHAR(50),
Status2 VARCHAR(50),
The following code is inserted in the SQL Task Execute Editor
INSERT INTO dbo.PkgAudit(PackageName
,LoadTime
,NumberofRecords
,Status1
,Status2
) VALUES(?,?,?,?,?)
Screen Shot (Parameter Mapping):
Problem: an error Message occurred when I hit Parse Query Button in the Execute SQL Task Editor, "Execute SQL: Task Editor: The query failed to parse. Syntax error, permission violation, or other nonspecific error". How I could Solve this
problem

Different connection providers require different Parameter syntax. E.g. ADO @ParameterName notatoin, not just an offset of 0,1 etc.
Arthur My Blog

Execute SQL task for Email ToLine using COALESCE and two variables

Hello...
I am converting an old DTS package to SSIS. The old package consist of mostly ActiveX Script so I am breaking it down into steps. Basically... I am retreving a set of records that need to be sent via email to multiple people. In my package to create
my ToLine for the Send Mail Task I am using several steps. Frist I am using:
SELECT CASE
          WHEN EXISTS ( SELECT        users.User_EmailAddress
FROM            dbo.Errors INNER JOIN
                         dbo.Users ON users.user_id = Errors.MonitorAuditor_User_Id
WHERE        ([Audit_Id] = ?) AND ([ErrorCode_Id] = ?) ) THEN
             1
          ELSE
             0
       END AS ValidEventID
I use this to see if there is any records to create my email string. This works fine. After this I have a Script Task that splits my pipe in two. When no records exist (User::ValidEventID == 0) I am loging that event to a log. When records do exist
I am using another Execute SQL task to create the actual ToLine:
Declare @combinedString VARCHAR(max)
SELECT      @combinedString = COALESCE(@combinedString + ', ', '') + Users.User_EmailAddress
FROM            dbo.Errors INNER JOIN
                         dbo.Users ON users.user_id = Errors.MonitorAuditor_User_Id
WHERE        ([Audit_Id] = ?) AND ([ErrorCode_Id] = ?)
SELECT convert(varchar(4000),@combinedString) as StringValue
I have my resultSet set to Single Row. I have two variables coming if for the Audit_Id and ErrorCode_Id. My Result Set is set to a Variable: User::EmailAddressString.
Next it goes through a foreach loop to map to the ToLine email variable that I created named User:User_EmailAddress.
Then I am using that in my Send Email Task.
It all works fine when I hard code my variables into the COALESCE statement but as soon as I replace that with the ? that SSIS requires for variables I am getting the following error:
[Execute SQL Task] Error: Executing the query "Declare @combinedString VARCHAR(max)
SELECT      ..." failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,
parameters not set correctly, or connection not established correctly.
I have tried changing my resultset property, I have checked my paramenters and my connection. I don't understand why it works fine when I have my varaiables hard coded but not when I change them to the ?.
Thanks in advance for you help in this matter.
Reach for the unknown!

Katherine... that did not work.
What I ended up doing was taking out the forloop all together. In my Execute SQL Task I changed the result set from single row to XML. I took out the COALESCE statement and just went for something more basic:
select users.User_EmailAddress + ';' as User_EmailAddress from Errors inner join users on users.user_id = Errors.MonitorAuditor_User_Id WHERE ([Audit_Id] = ? AND [ErrorCode_Id] = ?)
Currently I am just logging the string to a text file so I can see the results. In my text file the string is surrounded by <ROOT></ROOT>. So I will next I will work on triming that off the string and then populate my Send Mail Task.
This is how I trimed off the <ROOT></ROOT>:
Dts.Variables(
"EmailAddressString").Value = Replace(Dts.Variables("EmailAddressString").Value,
"<ROOT>",
Dts.Variables(
"EmailAddressString").Value = Replace(Dts.Variables("EmailAddressString").Value,
";</ROOT>",
Thanks again everyone for the help!
Reach for the unknown!

Failed to create an IDataAdapter object. This provider may not be fully supported with the Execute SQL Task

I executed a simple query inside an execute SQL task -
SELECT col1, col2
from thetable
where code = ?
order by id asc
Exec sql task - ADO.NET connection
parameter "code" is an int32 in SSIS and int32 in parameter mapping of exec sql task.
It works fine in SQL server, but in SSIS it causes the error -
[Execute SQL Task] Error: Executing the query "SELECT col1, col2
from thet..." failed with the following error: "Failed to create an IDataAdapter object. This provider may not be fully supported with the Execute SQL Task. Error message 'Incorrect syntax near '?'.'.". Possible failure reasons: Problems with
the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
How do I fix this error ?

Thanks. I think it was sqlclient. I changed it to OLEDB to avoid that issue. Btw, what is this "provider" ?
Hi blastoSO,
To check which provider is used by the current ADO.NET Connection Manager, you can open the “Configure ADO.NET Connection Manager” window, and check the “Managed Provider” option of each Data connection.
In an Execute SQL Task, if the managed provider is “System.Data.SqlClient”, we should use the rule for the ADO.NET connection type in the following table. If the managed provider is “System.Data.Oledb” or “System.Data.Odbc”, it actually uses the OLE DB provider
or ODBC provider, so we should use the rule for the OLE DB or OBC rule in the following table:
Reference:
http://technet.microsoft.com/en-us/library/cc280502.aspx
Regards,
Mike Yin
TechNet Community Support

[Execute SQL Task] Error: Executing the query failed with error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION."

I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRaj

To avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha

Execute SQL Task - FOR XML PATH query error

I have the following query
SELECT pl.Id,
pl.StartTime,
pl.EndTime,
pl.PackageName,
pl.Computer,
pl.Operator,
CASE WHEN (CHARINDEX('stack trace', pl.ErrorDescription) > 0) Then
   SUBSTRING(pl.ErrorDescription, 0, CHARINDEX('stack trace', pl.ErrorDescription))
   ELSE
   pl.ErrorDescription
   END as ErrorDescription
ISNULL(ErrorFile,'') as ErrorFile,
'Not Applicable' as SourceSystem
FROM etl.PackageLog as pl
WHERE pl.Processed = 0
ORDER BY pl.StartTime, pl.PackageName
FOR XML PATH('Row'), ROOT(N'FieldingCounts')
in a Execute SQL Task and i get the following error:
[Execute SQL Task] Error: Executing the query "SELECT pl.Id,
pl.StartTime,
pl.EndTime,
pl.Package..." failed with the following error: "An invalid character was found in text content.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
The query execute without problem in database and in the ssis package doens't run because of the column
CASE WHEN (CHARINDEX('stack trace', pl.ErrorDescription) > 0) Then
   SUBSTRING(pl.ErrorDescription, 0, CHARINDEX('stack trace', pl.ErrorDescription))
   ELSE
   pl.ErrorDescription
   END as ErrorDescription
Any help to overcome the problem?
Thanks

Hi,
It looks like that you must be trying to set the result of the query to some variable from the Execute SQL Task. If yes, make sure that the target variable is of the correct data type where XML string can fit into. Considering that in SSIS, we have
some limit for XML strings.
Please let me know if it doesn't help.
Thanks,
Nimit

SSIS Package Load Failure and is missing Execute SQL Task in Toolbox

Also, BIDS closes after right-clicking the toolbox and selecting “Choose Items”.
I’ve tried several ways to fix these issues with no success.
I’m running SSIS/SSMS/SQL Server 2008 R2 (but not running an SQL instance on my PC) on a Windows XP with Service Pack 3 workstation. I get the following errors:
WHEN OPENING BIDS:
I get 2 errors titled “Package Load Failure”. They both reference ‘Visual Studio Explorers and Designers Package’ as being what failed to load. The first message references GUID 8D8529D3-625D-4496-8354-3DAD630ECC1B. The second references GUID AA612177-A69A-4391-B2F4-17F8A88F4BBA
. They both mention contacting the package vendor, but I haven’t got any Add-ins loaded so I’m not sure what that means exactly. They also both ask if I’d like to skip loading the package in the future.
ONCE BIDS IS OPEN:
No error messages appear here. There is no ‘Execute SQL Task’ in the toolbox for Control Flows. Also, if I attempt to open a project containing this object (Execute SQL Task), I get this error in a modal window:
TITLE: Microsoft Visual Studio
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.
BUTTONS:
OK
. . . and these errors in the Error List at the bottom of the IDE:
Error      1
Error loading Package.dtsx: Failed to load task "Execute SQL Task", type "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91". The contact information
for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        C:\Documents and Settings\848862.VCHS_NT_DOMAIN\My Documents\Visual Studio 2008\Projects\LearnSSIS\LearnSSIS\Package.dtsx
1
1
Error      2
Validation error. Execute SQL Task : The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        Package.dtsx
0
0
Error      3
Validation error. Execute SQL Task : There were errors during task validation.
   Package.dtsx
0
0
Finally, when I attempt to add the Execute SQL Task via the Tools menu, “Choose Toolbox Items” selection, I do get the tabbed box for adding things. However, they only come up after issuing this error:
The following assemblies are installed SDK assemblies but could not be shown in the customize toolbox dialog because they are missing one or more components. Please make sure that all necessary libraries are available:
Microsoft.SqlServer.SqlCEDest.dll
Microsoft.SqlServer.Management.CollectorTasks.dll
Microsoft.SqlServer.SQLTask.dll
System.Data.SqlServerCe.dll
Microsoft.Synchronization.Data.SqlServerCe.dll
(above dll repeated at bottom of message)
After this message, I have my choice of .NET Framework Compnents. When I select COM Components, those come up with no problem. The WPF Components tab generates the same dll error above. The Maintenance tab is empty. The SSIS Data Flow Items tab loads fine,
as does the SSIS Control Flow Items tab – but there’s no Execute SQL Task there either.
If you open the toolbox (on a new project, with a project loaded, or without a project loaded) and right-click, then select “Choose Items”, the entire application quickly closes. This “closing behavior” is the same thing you get if you attempt to add toolbox
items through either the Tools menu or the right-click method when you launch BIDS in SafeMode.
In an effort to fix this – I’ve rolled back the .NET Framework version to 3.0 and reinstalled back up to 4; I’ve uninstalled and reinstalled SQL Server 2008 R2 shared services as well as the entire application; I’ve cleared the .tbd files from my user profile;
and I’ve run several things from the command line (devenv.exe /resetuserdata, /setup, /resetskippkgs, etc.). Lastly – I’ve applied every Service Pack and update applicable to my PC (ok, it belongs to my employer – but no one here has been able to figure this
out either).
After having worked this for several days now and, I think, exhausting every available avenue from search engines – I turn to you. Please let me know if you can help. Also, I can provide any additional
files or information you may require.
CBS

try: Devenv.exe /ResetSettings
http://msdn.microsoft.com/en-us/library/ms241273(v=vs.80).aspx
Or try this (it's for 2005, but maybe it works for 2008 aswell):
http://geekswithblogs.net/cicorias/archive/2007/10/10/Restoring-Missing-Toolbox-Items-in-Visual-Studio-2005---just.aspx
or try
http://stackoverflow.com/questions/1268298/how-to-rebuild-the-visual-studio-toolbox
"You can also go into the folder "C:\Documents and Settings\\Local Settings\Application Data\Microsoft\VisualStudio\9.0" and delete the *.tbd files. I have had to do this a couple times to get rid of duplicate items and when Reset Toolbox crashes
without warning"
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Execute SQL Tasks Failing for Duplicate Syntax Between DEV and Production DB

Similar Messages

Maybe you are looking for