ExecuteBaseLogic::Invalid object name 'tblStatus' when submitting data

Hi experts,
I've encounter the following error while submitting data via input schedule:
ExecuteBaseLogic::Invalid object name 'tblStatus' in: select distince d.CATEGORY,d.ENTITY,d.TIMEID from #RESULT_334020 d where signeddata<>0 and exists [select * from tblstatus s where [APP]='TIS' and d.CATEGORY=s.CATEGORY and d.ENTITY=s.ENTITY and d.TIMEID=s.TIMEID and [Status]>0).
I did not find any OSS notes on this and not sure what is the problem. Appreciate your advise on this issue.
Thanks!

Hi!
I have encountered the same problem as you have when starting an SSIS package with the setting: "Check for work status settings". According to SAP in BPC 5 SP 6 this setting must not be chosen.
I guess, that this setting is somehow passed to your default logic. So, you can try the following:
In BPC for Excel go to eData / Organize Package List; choose the company folder and in this the System Administration group. Select "Default Formulas" and click the edit button (a sheet with a pencil). In the pop-up box click the edit button next to the field with the file name (that's a sheet with a magnifying glass). In the new pop-up box click "Advanced". Put an apostrophe (') before the prompt for %CHECKLCK% and replace
TASK(Execute formulas,CHECKLCK,%CHECKLCK%)
with
TASK(Execute formulas,CHECKLCK,0)
Then try again. Maybe, this works.
Best regards,
Hartmut
Edited by: Hartmut Kesper on Feb 9, 2009 2:45 PM

Similar Messages

Script logic error - Invalid object name 'tblStatus'

Hi all,
Running BPC 5.1 SP5 on SQL 2005.
Has anyone ever seen this error message before? I only get the error message when choosing the run-time option in the package, to honor work status settings. This problem just appeared in the last few days, and I believe that a month or two ago, users were running the same logic (with the same yes-honor-work-status option selected).
We did recently upgrade from 5.1 SP3 to 5.1 SP5, and I'm wondering if this may be a cause? That's just a hypothesis though.
Invalid object name 'tblStatus'. in:
select distinct d.VERSION,d.ENTITY,d.TIMEID
from #RESULT_333729 d where signeddata<>0
and exists (select * from tblStatus s where [APP]='CONSOL' and d.VERSION=s.CATEGORY and d.ENTITY=s.ENTITY and d.TIMEID=s.TIME and [STATUS]>0)
I understand what it means, and of course there is no table in the appset database tblStatus. Work status locks are kept in tblConsolLock (where Consol is my app name). And in that table, the field name is StatusCode, not Status. So it appears that this is some vestige of code from an earlier version of BPC / O'soft.
This error occurs in a piece of script logic, that includes both basic SQL WHEN/IS/*REC's and also a *RUNALLOCATION. The error is thrown within the RUNALLOCATION code block. The complete run-up to the error message is shown below.
-- Calculate difference
insert into #DIFF_333729 ([ACCOUNT],[AFFILIATE],[CURRENCY],[DATASRC],[ENTITY],[PRODHIER],[TIMEID],[VERSION],signeddata)
select [ACCOUNT],[AFFILIATE],[CURRENCY],[DATASRC],[ENTITY],[PRODHIER],[TIMEID],[VERSION],amtWHERE as signeddata
from #WHERE2_333729
select [ACCOUNT],[AFFILIATE],[CURRENCY],[DATASRC],[ENTITY],[PRODHIER],[TIMEID],[VERSION],sum(signeddata) as signeddata
into #RESULT_333729 from #DIFF_333729
group by [ACCOUNT],[AFFILIATE],[CURRENCY],[DATASRC],[ENTITY],[PRODHIER],[TIMEID],[VERSION]
--Time to calculate and count differences (45459 found):2.5 sec.
select distinct d.VERSION,d.ENTITY,d.TIMEID
from #RESULT_333729 d where signeddata<>0
and exists (select * from tblStatus s where [APP]='CONSOL' and d.VERSION=s.CATEGORY and d.ENTITY=s.ENTITY and d.TIMEID=s.TIME and [STATUS]>0)
call 1 completed and data posted in 23.6 sec.
Run completed in 23.7 sec.
End time --->11:01:05 AM - Date:1/16/2009
Invalid object name 'tblStatus'. in:
select distinct d.VERSION,d.ENTITY,d.TIMEID
from #RESULT_333729 d where signeddata<>0
and exists (select * from tblStatus s where [APP]='CONSOL' and d.VERSION=s.CATEGORY and d.ENTITY=s.ENTITY and d.TIMEID=s.TIME and [STATUS]>0)
Here is the original script logic (from the LGX file -- the LGF file has a whole bunch of variables in it that would only confuse the matter more). It works just fine when the
*RUN_ALLOCATION @A_1||
USING/TOTAL|
ACCOUNT WHAT=659210,659310,659320,659410,659510,659610,659620,659630,659710,659810,659820,659910; WHERE=<<<; USING=PCAYTD510000; TOTAL=<<<|
PRODHIER WHAT=PRODHIERL1A;WHERE=[PRODHIERLEVEL]='5'; USING=<<<; TOTAL=<<<|
DATASRC WHAT=PCAASSESSSTAGE1,PCAASSESSSTAGE2; WHERE=PCAASSESSALLOC1; USING=INPUTCONSOL; TOTAL=<<<|
ENTITY WHAT=[COMPANYCODE]='7470' AND [PCAASSESSDRIVERBP]='PCAYTD510000' AND
([PCAASSESSMETHODBP] = 'ALLOCAUTO' OR [PCAASSESSMETHODBP] = 'ALLOCMANUAL');WHERE=<<<;USING=7470.BASE;TOTAL=<<<|
Anyone experience this same error message? I searched for SAP support notes and found nothing to do with tblStatus or similar.
Thanks for your help,
Tim

Hi Sorin,
Thanks, you've confirmed what I suspected.
Yes, we always process & save apps & dims on any upgrade.
We've reproduced the problem in all 3 of the environments with the customer's appset. I haven't yet reproduced in ApShell, but will do so & report it as a bug.
And just out of curiousity -- was the other message you saw here in this EPM forum? Before I posted my question, I searched both here, and in the support notes, for "tblStatus" and a few other terms about work status lock errors, etc., and came up with 0 results.
Thanks again,
Tim

Err. Invalid Object name 'tblStatus'

Hi Expers,
While i run an allocation in
BPC i am getting an error
"Invalid object name 'tblStatus' in.
In the script i have used the stored procedure
and through that i have updating the tblfactwbappl
table. Whether this is the cause of this issue.
Please help me on this.
Regards & Thanks
Baijuchandran.B

Hi baijuchandran b,
Please refer to the SAP Note below and see if this might help you resolve your issue:
Note 1330760 - Work status in Allocation logic
Summary
Symptom
User may get an error message "Invalid object tblStatus" when running allocation logic.
Other terms
BPC 70M SP4 Microsoft, Allocation, Work status, IM 158009 2009
Reason and Prerequisites
"Allocation engine" may try to find the old table which was used for checking work status. But the table is not used any more from version 5. So the work status checking process fails with the error.
Internally, the features in work status checking process were changed (work status dimension, database table, ownership related to manager and owner) from version 5. But these features were not applied to the "Allocation engine" in logic.
Solution
The work status features are applied to the "Allocation engine" in logic.
This issue is resolved in 70M SP4.
Cheers^^,
Marvin

Why its showing error : Invalid Object Name 'table name' when we try to insert data ?

Hi,
    When i try to insert data in the database with the following query
                con.Open();
                cmd = new SqlCommand("insert into good(ID,Name) values('" + textBox1.Text + "','" + textBox2.Text + "')", con);
                cmd.ExecuteNonQuery();
                MessageBox.Show("Insert success");
                con.Close();
    its showing following error Invalid Object Name 'good'

Use 3-part naming like: MyDatabase.dbo.good(ID,Name) .
Also consider using stored procedure for database INSERTs.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Invalid Object Name When Executing from Report Manager

I ran some code to create a modified view of ExecutionLog3 on a SQL Server 2012 instance. The ReportServer and ReportServerTempDB were transferred from a 2005 instance and are still on that compatibility level. After creating the new view, I
created a report in SSDT and it runs fine. I deployed the dataset followed by the report. I went to Report Manager to test it and the report fails with the following:
An error has occurred during report processing. (rsProcessingAborted)
The execution failed for the shared data set
'ExecutionLog'. (rsDataSetExecutionError)
Query execution failed for dataset ''. (rsErrorExecutingCommand)
Invalid object name 'ExecutionLog3_Modified'.
The code for the view is below and it came from MSSQLTips. Why does the report run fine from SSDT and fail in Report Manager?
USE [ReportServer]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE VIEW [dbo].[ExecutionLog3_Modified]
AS
SELECT
EL.InstanceName,
COALESCE(C.Path, 'Unknown') AS ItemPath,
EL.UserName,
EL.ExecutionId,
CASE(EL.RequestType)
WHEN 0 THEN 'Interactive'
WHEN 1 THEN 'Subscription'
WHEN 2 THEN 'Refresh Cache'
ELSE 'Unknown'
END AS RequestType,
-- SubscriptionId,
EL.Format,
Parameters,
CASE(EL.ReportAction)
WHEN 1 THEN 'Render'
WHEN 2 THEN 'BookmarkNavigation'
WHEN 3 THEN 'DocumentMapNavigation'
WHEN 4 THEN 'DrillThrough'
WHEN 5 THEN 'FindString'
WHEN 6 THEN 'GetDocumentMap'
WHEN 7 THEN 'Toggle'
WHEN 8 THEN 'Sort'
WHEN 9 THEN 'Execute'
ELSE 'Unknown'
END AS ItemAction,
EL.TimeStart,
YEAR(EL.TimeStart) AS Start_Year,
MONTH(EL.TimeStart) AS Start_Month,
DATENAME(MONTH,EL.TimeStart) AS Start_Month_Name,
DATENAME(DW,EL.TimeStart) AS Start_Day_Of_Week,
DATEPART(WEEKDAY,EL.TimeStart) AS Start_Day_Number_of_Week,
EL.TimeEnd,
EL.TimeDataRetrieval,
EL.TimeProcessing,
EL.TimeRendering,
CASE(EL.Source)
WHEN 1 THEN 'Live'
WHEN 2 THEN 'Cache'
WHEN 3 THEN 'Snapshot'
WHEN 4 THEN 'History'
WHEN 5 THEN 'AdHoc'
WHEN 6 THEN 'Session'
WHEN 7 THEN 'Rdce'
ELSE 'Unknown'
END AS Source,
EL.Status,
EL.ByteCount,
EL.[RowCount],
EL.AdditionalInfo,
C.Name,
C.CreatedByID,
C.ModifiedByID,
C.Description,
C.CreationDate,
C.ModifiedDate,
CASE
WHEN C.TYPE=1 THEN 'Folder'
WHEN C.TYPE=2 THEN 'Report'
WHEN C.TYPE=3 THEN 'XML'
WHEN C.TYPE=4 THEN 'Linked Report'
WHEN C.TYPE=5 THEN 'Data Source'
WHEN C.TYPE=6 THEN 'Model'
WHEN C.TYPE=8 THEN 'Shared Dataset'
WHEN C.TYPE=9 THEN 'Report Part'
END AS Type_Description
FROM
ExecutionLogStorage AS EL
LEFT OUTER JOIN Catalog AS C ON (EL.ReportID = C.ItemID)
GO
Lee Markum

Hi Lee,
According to your description, you can't process the dataset when viewing the report on report server. Right?
In this scenario, as you can see the dataset name in error message is empty, and it says "Invalid Object Name". Because you have already created a view in your database. When you run this report again, this query be executed again so that you can
not create another view with same name. So you just need to query the view directly when creating dataset.
Select * from ExecutionLog3_Modify
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SSRS Error : Query execution failed for dataset 'dataSet'. (rsErrorExecutingCommand) Semantic query execution failed. Invalid object name 'RPT.*********'. (rsSemanticQueryEngineError)

I am new to SSRS and I am trying to migrate reports from 2008 to 2012. As I have so many reports to migrate, I simply got the back up of ReportServer,
ReportServerTempDB, and Encryption Key and restored them to test environment. I made necessary configuration from RS configuration tool. I am able to see the reports now when I browse //hostname/reports. But when I open any particular report I am getting some
error.
· An error has occurred during report processing.
(rsProcessingAborted)
Query execution       failed for dataset 'dataSet'.
      (rsErrorExecutingCommand
Semantic query        execution failed. Invalid object name
       'RPT. ******'. (rsSemanticQueryEngineError)
****** - I am assuming this is a custom data class.
Does anyone have insight on this? or any better way that I can migrate the reports to new server with less efforts.
I don’t have the reports solution file to deploy the reports, so I have followed backup and restore process.

Hi Kishore237,
According to your description, you migrated some reports from Reporting Services (SSRS) 2008 to 2012. Now you get error when accessing the reports on SSRS 2012. Right?
In this scenario, did you modify the report data source in database after migration? You can try to open the report in Report Builder or Report designer and check the report dataset. If you can preview the report in Report builder or Report designer,
please try to redeploy the report to Report Server. If it is still not working, please try to restore the database from backup. And for migrating reports, please follow the "Content-Only Migration" in the link below:
http://msdn.microsoft.com/en-us/library/ms143724(v=sql.110).aspx
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Failure Description: ORA-44002: invalid object name

Hi,
I'm trying to use O-cluster to find clusters in my data programmatically. When I try to bin the data (using a modified version of the dmocdemo.java), I get the following error
Failure Description: ORA-44002: invalid object name
Details -
I'm trying to cluster data in my table (see desc below) based on values of evt_hostname, evt_key and evt_username;
SQL> desc sc.sc_event_store;
Name Null? Type
EVT_SEQNO NOT NULL VARCHAR2(64)
EVT_HOSTNAME NOT NULL VARCHAR2(64)
EVT_TIMESTAMP NOT NULL TIMESTAMP(6)
EVT_ID NOT NULL NUMBER(8,2)
EVT_CAT_ID NUMBER(8,2)
EVT_SERVERSTATE NUMBER(8,2)
EVT_USERNAME VARCHAR2(64)
EVT_KEY VARCHAR2(2048)
EVT_VALUE VARCHAR2(64)
EVT_RECUR_TAG NUMBER(15,2)
EVT_CLUSTER_ID VARCHAR2(64)
I've modified prepareData() in dmocdemo.java like this
isOutputAsView = false;
inputDataURI = "SC.SC_EVENT_STORE";
outputDataURI = "OC_BINNED_DATA_BUILD_JDM";
// Create boundaries for all numeric attributes
OraBinningTransformImpl buildDataXform =
(OraBinningTransformImpl)m_binningXformFactory.create(
inputDataURI, outputDataURI, isOutputAsView );
//buildDataXform.setLiteralFlag(true);
String[] excludeColumnList = {"EVT_SEQNO","EVT_TIMESTAMP","EVT_ID","EVT_CAT_ID","EVT_SERVERSTATE","EVT_VALUE","EVT_RECUR_TAG","EVT_CLUSTER_ID"};
buildDataXform.setExcludeColumnList(excludeColumnList);
buildDataXform.setNumberOfBinsForCategorical(125);
//buildDataXform.setNumericalBinningType(OraNumericalBinningType.auto_equi_width);
buildDataXform.setCategoricalBinningType(OraCategoricalBinningType.systemDefault);
xformTask = m_xformTaskFactory.create(buildDataXform);
executeTask(xformTask, "ocPrepareBuildTask_jdm");
The executeTask() function tries executing the task, but returns with
Failure Description: ORA-44002: invalid object name
Any insight/help will be greatly appreciated.

Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.

: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Hi   .
    I was creating the pass the values t in temp tables though s sis package vs2012 .
  First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
   exec USP_GETMP02333
   go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one   executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
                [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help me

Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.

Invalid File Name Errors when syncing to Ipod

Ever since an update last fall I have been getting Invalid file name errors when I try to sync my ipod. A window would pop up saying "Windows could not copy 'SONGNAME' to the iPod 'IPODNAME' because an unkown error occurred (-37)." I would press OK and another window would immediately pop up that would say, "Attempting to copy to the disk 'IPODNAME' failed. the file name is invalid or too long."
The windows would keep popping up countless times until the sync would just seem to time out and stop.
The problem songs would have no problem playing in iTunes.
Prior to the update this did not happen. No new songs were added around this time and nothing was changed to my file directory structure. I was too busy to troubleshoot this problem at the time and hoped that another update would fix it. Well, here I am many months and updates later and still no fix. After fiddling with iTunes and resetting my Ipod multiple times (goodbye saved angry bird games)I have found out that:
1. By writing down the file name when the error windows pop up I can get a partial list of the problem file names. I could not get a complete list of the problem files because the sync would time out before a full list could be compiled (the list appears to be in the hundreds).
2. If I changed the name of the file by adding OR deleting one character, remapping the song in itunes, the song would then sync properly.
3. If I changed the name of the file, remapped the location of the file within iTunes, changed the name of the file BACK to the original name that iTunes supposedly had a problem with, and then remapped the location of the song within iTunes, the song would then sync properly
4. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, the song would sync properly.
5. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, moved the file BACK to the original directory, remapped the song again, the song would sync properly.
6. If I renamed the file and then named it back to the original file name WITHOUT remapping the file location in iTunes, the song would still not sync properly
7. If I moved the file into a different directory and then back again without remapping the file location, the song would still not sync properly.
8. Changing or deleting the tags has no effect at all.
9. File name lengths are already under 200 characters and there are no special characters used.
So, to sum up, I have found out a way to fix the issue. The problem is, that there are hundreds of songs that appear to be affected and renaming or moving every single one individually and then remapping is extremely inefficient and ignores the cause of the problem. I also did not want to delete the itunes library and then add all of the songs back in because I have many custom playlists that I have spent hours creating and I do not want to delete them.
Is there a better way to fix the problem? Especially if someone knows the root cause?

I got a procmon log file and examined it. I have the file and I could also provide you with that or screenshots of it.
There is nothing unusual about it. I can see entires in which CR has successfully opened the report and has cached in a c:\windows\temp.
However there is one or two non-successful entries that may be related, especially that examining the stack trace brings us to a call to get_ProductLocaleID():
- A call to read reg entry HKU\S-1-5-20\Software\Business Objects\Suite 12.0\Crystal Reports\Locale fails with NAME NOT FOUND.
- immediately after that and from the same process (w3wp.ex) there is a call to open directory "c:\" which is logged as ACCESS DENIED.
Any subsequent unsuccessful calls seem to be results of exception handling in the debug code.
Does this point to any setup issues with CR? We always run the redistributable x86 runtime when installing it.

Report error, Invalid object name 'v_lu_cpu'

Hi
I have a report that I have imported from another SCCM server that has it working. I have changed the datasources after the import but when I try to run the report I get this error message:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DataSet0'. (rsErrorExecutingCommand)
Invalid object name 'v_lu_cpu'.
Does anybody know what this means?

Ok, then I understand.
I'm not that good at reporting so if anybody can help out with replacing the code that uses v_lu_cpu with
something else, it would be very kind. Thank you
SELECT DISTINCT
v_r_system.netbios_name0 AS "Computer Name",
v_r_system.Description0 AS "Description",
v_gs_system_console_usage.topconsoleuser0 AS "Top Console User",
v_GS_PC_BIOS.serialnumber0 AS "PC Bios Serial Number",
v_gs_computer_system.manufacturer0 AS "Computer Manufacturer",
v_gs_computer_system.model0 AS "Computer Model",
CASE
WHEN v_gs_computer_system.manufacturer0 LIKE 'Dell%'
THEN 'http://support.dell.com/support/topics/global.aspx/support/my_systems_info/details?servicetag=' + v_gs_system_enclosure.serialnumber0
WHEN v_gs_computer_system.manufacturer0 LIKE 'Hewlett%'
THEN 'http://h20000.www2.hp.com/bizsupport/TechSupport/WarrantyResults.jsp?sn=' + v_gs_system_enclosure.serialnumber0 + '&country=US'
WHEN v_gs_computer_system.manufacturer0 LIKE 'HP%'
THEN 'http://h20000.www2.hp.com/bizsupport/TechSupport/WarrantyResults.jsp?sn=' + v_gs_system_enclosure.serialnumber0 + '&country=US'
ELSE '(Not available)'
END AS "Warranty Information"
FROM v_gs_processor
INNER JOIN v_r_system
ON v_gs_processor.resourceid = v_r_system.resourceid
INNER JOIN v_gs_system_enclosure
ON v_gs_system_enclosure.resourceid = v_r_system.resourceid
INNER JOIN v_GS_PC_BIOS
ON v_GS_PC_BIOS.resourceid = v_r_system.resourceid
INNER JOIN v_gs_computer_system
ON (v_gs_computer_system.resourceid = v_r_system.resourceid)
LEFT JOIN v_gs_system_console_usage
ON v_gs_system_console_usage.resourceid = v_r_system.resourceid
LEFT JOIN v_lu_cpu
ON Lower(v_lu_cpu.cpuhash) = Lower(v_gs_processor.cpuhash0)
WHERE v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 <> 12
AND
v_gs_computer_system.manufacturer0 NOT LIKE 'VMware%'
AND
v_gs_computer_system.model0 NOT LIKE 'Virtual Machine'
AND
v_R_System.Operating_System_Name_and0 LIKE 'Microsoft Windows NT Workstation%'

Invalid object name 'dbo.v_R_System'

Hi,
About six months ago I implemented SCCM in our domain and it's been working great. This morning, when I attempted to run one of the Asset Intelligence reports in the console, I received the following error...
An error has occurred during report processing. (rsProcessingAborted)
...uh oh! So I logged onto our SQL database server, opened up the Report Manager in IE and attempted to run the same report. This time I got a bit more...
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DataSet0'. (rsErrorExecutingCommand)
Invalid object name 'dbo.v_R_System'. Could not use view or function 'fn_rbac_R_System_Valid' because of binding errors.
...I'm no SQL admin, so time to ask Mr Internet. The only related post I could find was the first one you get when you search "dbo.v_R_System missing" on any search engine (the ones I tried anyway).
...which wasn't particularly helpful.
One thing I did try, which I thought was worth a shot, was to create a new database in Reporting Services Configuration Manager. After a few minutes that populated nicely with all the reports,
but I'm still getting the same problem.
We've got a really simple environment. Two Windows Server 2008 R2 servers for SCCM,
one running the site database and reporting server and the other doing everything else. Database is running on Microsoft SQL Server 2012.
Any ideas?
Cheers,
Dave

I was also missing that same view. I can't believe it. In production and in my test environment we are on ConfigMgr 2012 SP1 CU3. I started the upgrade on my test environment and it failed saying that it couldn't find that view.
I went to our production environment and the view existed. I scripted the creation of the view and then created the view in our test environment. The upgrade successfully completed after that. Thanks for leading me in the right direction!

Error Invalid object name 'mbrGROUPS'.

I'm attempting to validate the standard elimination logic for Intercompany eliminations. I'm getting the following error when I try to validate:
Invalid object name 'mbrGROUPS'. in:select [ID] from mbrGROUPS where [REPORTING] = 'Y'
Below is my logic for this. I'm trying to use this logic for a Legal consolidations application.
//=============================================
// Default Intercompany Eliminations
//=============================================
*INCLUDE SYSTEM_CONSTANTS.LGL
*SYSLIB ICELIMWITHCURR.LGL
//=============================================
// Elimination logic for three organization(H1, H2, H3)
//=============================================
INITIALIZE_ELIM()
ELIMINATE_ORG(H1)
ELIMINATE_ORG(H2)
ELIMINATE_ORG(H3)
*COMMIT

I fixed this myself. I forgot to change the "CURRENCYDIM" in the ICElimWithCurr file to my Reporting Currency, which in this case is "ConsolView"
Logic can be so humbling sometimes.

Invalid object name 'dbo.uf_GetRateSrcMember'

Hello Friends,
We recently applied the SP3 (CPMBPC03P_1-20002499) for BPC 5.1. We are in Single Server environment. Our BPC 5.1 build was 5.0.486 which was required to install the SP3. After the installation it is 5.0.502
We are getting the error below when we are trying to change the appliction sets from from the main page.
Any help to resolve the issue is appreciated
Server Error in '/OSoft' Application. Invalid object name 'dbo.uf_GetRateSrcMember'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: Invalid object name 'dbo.uf_GetRateSrcMember'.
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:
Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
Add the following section to the configuration file of your application:
<configuration>
   <system.web>
       <compilation debug="true"/>
   </system.web>
</configuration>
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
Stack Trace:
[Exception: Invalid object name 'dbo.uf_GetRateSrcMember'.]
   Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack) +905
   OSoft.Consumers.ZFP.WebBase.PageBase.GetCurrentView() +518
   OSoft.Consumers.ZFP.WebBase.PageBase.get_CurrentView(String strDimension) +43
   ASP.Landing_aspx.__Render__control1(HtmlTextWriter __output, Control parameterContainer) +95
   System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +27
   System.Web.UI.Control.Render(HtmlTextWriter writer) +7
   System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +243
   System.Web.UI.Page.ProcessRequestMain() +1926
Really looking forward for answers.
I would really really really appreciate any help
Thanks

Kaji,
I had the same problem. Here is the solution:
Dear customer,
This issue looks similar to a previously reported bug.
In general there is the possibility that some service/process
remained in a bad status and this can be fixed by restarting the server
But could you please also check, whether this description fits
to your scenario:
This issue occurred because when there are no secured dimensions
in an appset,
The modified application process remove the user function
which is used for checking secured dimension.
In case there is no secured dimension in the appset the
problem occurres.
This issue looks similar to a previously reported bug.
In general there is the possibility that some service/process
remained in a bad status and this can be fixed by restarting the server
But could you please also check, whether this description fits
to your scenario:
This issue occurred because when there are no secured dimensions
in an appset,
The modified application process remove the user function
which is used for checking secured dimension.
In case there is no secured dimension in the appset the
problem occurres.
When modify application is run , the user function has been removed.
A workaround is this:
if you make Entity and RateSrc as secured dimension,
the user function will be made in the appset again.
Then you can change the user function as other name in database
by renaming. After finished the rename,
you can change the dimension as unsecured dimension like current.
Then, you have to replace the user function name
as original function name.
Because the user function name is dependent on dimension name.
If you can#t connect BPC Admin due to web page error,
you have to execute the EverestAdmin.exe file
in "C:\Program Files\BPC"
Hope it solves the prob...
Nic

Invalid object name 'SVERS'

Hello,
When trying to perform an Upgrade of a BW3.0B to BW3.5, Prepare Phase, an error occurs in script MSSCONCHECK.SQL.
- Msg 208, Level 16, State 1, Server SRVDW, Line 1
Invalid object name 'SVERS'.
Can anyone help?
Thank you.
Regards,
PT

I have similar eror message during upgrade from ECC 5.0 to ECC 6.0 on MS SQL 2005. The output from my sapup is as shown below:
>> 07:39:34 PREPARE: START OF PHASE INITPUT_PRE
Supply the following information:
Confirm the name of your SAP system: [AWD]
SAP SYSTEM ID     =
The hostname of your central SAP server: [SERVER01]
SAP SYSTEM HOST   =
Enter the SAP instance number: [02]
INSTANCE NUMBER   =
The system identifier of your database: [AWD]
DATABASE ID       =
The hostname of your database server: [SERVER01]
DATABASE HOST     =
Executing script MSSCONCHECK ...
MSSCONCHECK: Connection check failed for the user specified
      SAPup message
SAPup> Errors were found in the logfile MSSCONCHECK.LOG
       after execution of the script MSSCONCHECK.SQL.
SAPup> SAPup cannot proceed until these errors are fixed.
       Please, examine MSSCONCHECK.LOG, fix reported errors and then call R3
gain
            - "continue"
            - "cancel"
Enter one of these options [continue] :=
      SAPup message
SAPup> SQL-scripts must be executed by the NT user account SERVER01\awdadm.
       Check your installation of the integrated security procedure
       on host SERVER01 and make sure that a login for the NT user
       SERVER01\awdadm exists with the following rules:
       - user SERVER01\awdadm owns the role System Administrators
       - user SERVER01\awdadm has the default database AWD
SAPup> Integrated security installed correctly?
            - "no"
            - "yes"
Enter one of these options [no] := yes
Executing script MSSCONCHECK ...
I'm currently running both Solution Manager 4.0 and mySAP ERP 2004 SR1 on the same box in Development environment.
Has anyone gotten a breakthrough on this error messages? Mode set to both SQL and Windows Authentication, can do selct * from SVERS for solution manager database but not for ECC 5.0.
Urgent!!!!

Invalid object name for Next value from sequence using sqlserver 2012

Select SequenceName.nextVal into lint from dual ;
Invalid object name error message is coming when using sqlserver 2012
Please help

Hello,
Create the sequence and a stored procedure which returns the sequence as follows:
CREATE SEQUENCE mySequence_tinyint AS tinyint
GO
CREATE PROCEDURE Central_CreateSequence
   @NextID BIGINT OUTPUT
AS
BEGIN
   SET NOCOUNT ON;
   SELECT @NextID = NEXT VALUE FOR mySequence_tinyint;
END
GO
In PowerBuilder, run this script:
long ll = -10
DECLARE proc PROCEDURE FOR Central_CreateSequence @NextID = :ll OUTPUT;
EXECUTE proc;
FETCH proc INTO :ll;
CLOSE proc;
IF SQLCA.SQLcode <> 0 THEN
MessageBox("error", SQLCA.sqlerrtext)
END IF
MessageBox("", ll)
I know there can be other ways to return the next value of the sequence...
HTH
Jacob

ExecuteBaseLogic::Invalid object name 'tblStatus' when submitting data

Similar Messages

Maybe you are looking for