Executing a workitem from BSP

Hi,
We are on WAS 620 . We are getting an error
"Error message: Error sending data, session terminated ( type of termination: TH_RES_FREE ) "
while calling function module "SAP_WAPI_EXECUTE_WORKITEM" from BSP application.

Hi,
I am working on integrated ITS (WAS640),When I am trying to execute a IAC service, It is asking a Logon ID and password,after giving User Id and Pass, It is throwing a execption.... "the termination type was : TH_RES_FREE",
I have done all activations in ICF too, what might be the reason....
Thanks in advance,

Similar Messages

Error in SAPLogon executing a Workitem from Outlook.

Hi everyone, I have set the communication between SAPWorkflow and Outlook, SAP send the workitems to the Internet account for each user without any problem. The situation that I got is when Iu2019m executing the Workitem from Outlook and It try to make the logon to SAP, this is what happened:
. In the Outlook message I make a click over the attachment to execute the Workitem.
. The interface shows up a pop up to type the password for the user which own the Workitemu2026..Itu2019s ok so far!!
. Once when I have type the password, thereu2019s a second window which correspond to the main and first SAP window to ask for the initial information (Client, User, Password) but in the bar below, thereu2019s an error telling me that the Client is not available on this system, and the field for the client is in blank; so I have to type the client and the password again(something wrong here!!), but the user still fine.
. After typed all those fields (client and password), the system make a logon and brings me the right transaction and the rest works perfectly.
I donu2019t think the error could be in field SAPLOGON_ID in the variant for the program RSWUWFML2 because I have set this variant several times in different SAP systems with the same information and works fine, for your information, this field goes in blank.
Thanks any help to avoid this error in the logon system and be able to enter directly to SAP system.
Regards
Felipe Uribe

Hi Aditya, I really don't understand your comment, I sent you the version as I wrote you before on this forum in this topic (see *), additionally as I wrote here, I've found the solution and It wasn't related to Windows or Internet Explorer, The problem as the note that I attached says that the problem is because the standard SAP function to create the shortcut does not have the right parameter as We need (SY-MANDT).
I think this is very reasonable answer and good orientation for anyone.
Anyway, thanks a lot for all your help.
Regards
Felipe.
(* Posts: 34 Registered: 12/22/07
message Posted: Jan 13, 2009 9:19 AM in response to: Aditya Varrier
Hi Aditya, I'm using Internet Explorer 7, Winsdows Vista.
I really think Windows and my machine are not the problem because I have another Client in which It's working perfectly. So, all the fact point to the Client configuration in some place in SAP installation.
Any idea?
Thanks a lot. )

Executing a workitem from UWL for approval process in ESS/MSS

Hi All,
I am working on ESS/MSS workflows...Everything is configured and also workflow is developed...When i try to execute a workitem from UWL to approve a PCR, i am getting a message in the status bar as "work item exucuted(new processing status:"in process"). But it's not launching the SAP transaction for approval.
Can anyone tell what is the probelm....
Thanks,
Sunil

Hi Sunil,
how r u, i have also same dout i know the configuration steps of UWL but i don't know how to Configuration of Universal worklist and Timesheet application in ESS/MSS to display at manager side....i am new to this ESS and MSS Configuration side.....i request to u could u please tell me the step by step procedure or else if u have any configuration steps which u have already done please send me a mail to my id : [email protected]
really i appreciate your help....i will be waiting for your mail.....
Thanks and Regards,
Abhiram.

Workflow: Execute WorkItem from Inbox

Dear experts
We upgraded CRM 4.0 to CRM 2007. We have workflows scenarios in our system. Workflows are received in our Outlook Inbox. From there, we have 3 options:
- Workflow Inbox
- Display Work Item
- Execute Work Item
The workitem should open a service process in CRM.
If we execute the workitem from the outlook inbox, it will open the service process but not using the standard WebUI screen, instead it will use the IC WebUI screen to open the service process.
If we execute the workitem from the worklist (in WebUI), it will open the service process using the standard WebUI screen.
What should we change in order to use the standard WebUI screen (and not the Interaction Center) when we execute a work item from outlook?
Thanks in advance for your help.
Best regards
Stephanie

Hi Govil,
Thanks.
The agent assignent is fine and the task is also made as general task . Even the object i am using is standard 'BUS2000120' not the custom one.
i feel the problem may be due to someworkflow settings between Web UI and backend. Let me know if any settings like such (apart from SWU3).
Any more suggesstions please????
Regards,
Sateesh

Executing custom Transaction from Dialog Task

Hi all,
I am calling a custom Transaction from a dialog task (absolutely, from the method of the task). The user will be executing that workitem from ESS.
My problem is, while the user executes the workitem it is giving two screen titles in the top as mentioned below. One is the usual ESS header (Work center of ESS12345) and other one is the "Title in of custom program".
I am not getting why it is giving two titles in the screen. Please advice.
Versions being used.
R/3 - ECC5
ESS - ITS 640
Regards,
Anbarasan K

This is probably because there is no new window opened when the task is started.
Regards,
Martin

Error in opening Workitems from UWL

Hi All,
I am trying to open a transaction from the workflow using a dialog task.
when i execute the workitem from SAP business workplace the task gets execute properly.
but when i try to run the same task from UWL it opens the SAP easy access screen.
All my other workitem like leave request approver are getting opened properly from UWL.
This might be related to some UWL configuration. I searched all the forums there are many similar questions but could not get any answer.
Regards,
Umesh Chaudhari.

Hi ,
please find the following solution .it will definitely work .
If you leave configuration is done.
There was an incorrect data in your system. To do these please follow following process.
delete this request using
PTARQ> Delete documents (RPTARQDBDEl)
Please read the report documentation before
deleting the request but it should be safe as it is
a development system.
Please delete this with the above information or delete all
the records for the approver.
After this,, there will be some incorrect workitem in approver inbox.
You need to clear that also by Tcode - SWWL.
Also try following
Can you check if the Pernr used
has correct information like It0105 etc, also the rules are
correctly defined.
For the Employee, First of all check the Period Work Schedule also
the Quotas of the pernr needs to maintained in 2006, Please do
this customisation and it should solve the issue.
Maintain the absence quota in the IT2006 and then try once.
Also make sure that the Settings in Webmo and PTARQ etc all is done
The pernr belongs to the a Rule and have absences defined for him.

Executing/accessing workitem(approv./rejects on BSPage ) from Outlook

Hi
Could you plz guide me on the following requirement.
A request should be approved by manager. And its a BSP application. Both request creation and approval is through BSP pages. I understand we have to generate(from WF_EXTSRV) a WF Task with reference to Approval BSP page. And include the same task in the workflow. So whenever a request is created, a workitem will be sent to manager's SAP-inbox. so when workitem is executed approval BSP page will be opned in a browser where manager will either approvr/rejects[he will also provide reason on the page].
But the business process is such a way that manager will execute the workitems only from outlook.
So now my question is, workitem should be availble in outlook for manager's access. How a mail can be sent to manager's inbox with links to workitem, whenever a request is created. So that when clicked on the link, work item should be executed & approval BSP page should be open in browser. Manager will either approv/reject the request which is in process. And then manger's action should be sent back to workflow.
Please let me know what configuration is required in order to achive this requirement. let me know where can i find the help(URL) for this configuration.
Regards,
KR
Message was edited by: K R
Message was edited by: K R

So if i get this right, you want to send a mail from the System to the Manager. The Manager should receive a link to the correct BSP Page. OK i use something like that...
A function module with this code:
function z_tpaf_send_14days_mail.
""Lokale Schnittstelle:
*" IMPORTING
*"     REFERENCE(IWA_DATA) TYPE >(DDIC TABLE)<
*" EXCEPTIONS
*"      CONTACT_ERROR
*"      NO_MAIL_ADRESS
*"      MESSAGE_NOT_SENT
*"      SAP_CONTACT_NOT_EXIST
class cl_abap_char_utilities definition load.
data: lwa_sadrpx type sadrpx,
        lwa_sadr10 type sadr10,
        lt_mail     type table of solisti1,
        lwa_mail    type solisti1,
        ls_doc      like sodocchgi1,
        lt_rec      type table of somlreci1,
        wa_rec      type somlreci1,
        lv_int      type i,
        lwa_rfc     type ztpa_customize,
        lwa_link    type ztpa_customize,
        lt_text     type table of solisti1,
        lt_vsadrp   type table of v_sadrp,
        lwa_vsadrp type v_sadrp.
select single adrnr from sadrpx into corresponding fields of lwa_sadrpx
where susid = iwa_data-userid.
if sy-subrc ne 0.
    raise contact_error.
endif.
select single * from sadr10 into lwa_sadr10
    where adrnr = lwa_sadrpx-adrnr
    and   lfdnr = '001'.
if lwa_sadr10-smtp_adr is initial.
    raise no_mail_adress.
endif.
select single * from ztpa_customize into lwa_rfc
    where sysid = sy-sysid
    and   type = 'RFC_MAIL'.
select single * from ztpa_customize into lwa_link
    where sysid = sy-sysid
    and   type = 'LINK_NOTI'.
wa_rec-receiver = lwa_sadr10-smtp_adr.
wa_rec-rec_type = 'U'.
append wa_rec to lt_rec.
    call function 'BN_USER_FETCH'
    exporting
      input                 = iwa_data-userid
      LEFT_COMPANY          = ' '
      MULTIPLE              = ' '
    no_dialog             = 'X'
      SEND_EXTERN           = ' '
      SEND_INTERN           = 'X'
      SEND_PRIVAT           = ' '
    IMPORTING
      ADDRESS               =
      VOLLNAME              =
    tables
      user                  = lt_vsadrp
   exceptions
     entry_incorrect       = 1
     id_not_exist          = 2
     no_entry              = 3
     user_locked           = 4
     user_not_exist        = 5
     others                = 6.
read table lt_vsadrp into lwa_vsadrp index 1.
if lwa_vsadrp is initial.
    raise sap_contact_not_exist.
endif.
***********************************START MAIL TEXT******************************
concatenate 'Dear ' lwa_vsadrp-name1 into lwa_mail separated by space.
append lwa_mail to lt_mail.
lwa_mail = '>TEXTTEXTTEXT'.
append lwa_mail to lt_mail.
lwa_mail = .'.
append lwa_mail to lt_mail.
lwa_mail = ''.
append lwa_mail to lt_mail.
    lwa_mail = ''.
append lwa_mail to lt_mail.
***********************************END TEXT******************************
ls_doc-obj_name = 'Notification'.
CONCATENATE 'Notification Change Request' wa_creq-change_id INTO ls_doc-obj_descr SEPARATED BY space.
ls_doc-obj_descr = 'Notification Third Party Access Request TIME OUT'.
ls_doc-sensitivty = 'O'.
describe table lt_mail lines lv_int.
lv_int = lv_int * 255.
ls_doc-doc_size = lv_int.
call function 'SO_NEW_DOCUMENT_SEND_API1'
    destination lwa_rfc-value
    exporting
      document_data                    = ls_doc
    DOCUMENT_TYPE                    = 'RAW'
    PUT_IN_OUTBOX                    = ' '
      commit_work                      = 'X'
IMPORTING
    SENT_TO_ALL                      =
    NEW_OBJECT_ID                    =
    tables
    OBJECT_HEADER                    =
    CONTENTS_HEX                     =
    OBJECT_PARA                      =
    OBJECT_PARB                      =
      object_content                   = lt_mail
      receivers                        = lt_rec
   exceptions
     too_many_receivers               = 1
     document_not_sent                = 2
     document_type_not_exist          = 3
     operation_no_authorization       = 4
     parameter_error                  = 5
     x_error                          = 6
     enqueue_error                    = 7
     others                           = 8.
if sy-subrc <> 0.
    raise message_not_sent.
endif.
endfunction.
I hope this helps...
Regards
Lars

How can I execute a query from a BSP application?

How can I execute a query from a BSP application?
I´m trying to execute a Query from intranet. I´ve been looking for examples, but the templates I´ve found doesn´t help me.
does anybody has an example?
Thanks.

Hi
Have you designed the BSP application ?
design it first with one page
page will have layout and Event handlers
Design the layout with the fields
in the event handler there are events
in the event On Initiailization or ON inputprocessing write the select query similar to what we write in routine ABAp and fetch the data into ITAB and that has to be passed to the Layout
see the doc
BSP
To learn how to create Web applications with Business Server Pages, you can work through the simple tutorials that build on each other. You should be able to run through all of the steps described here in your own system.
If you want to develop Web applications with BSPs, your system must meet the following requirements: Prerequisites for Creating Web Applications.
The following tutorials are available:
· First Tutorial: First Steps with Business Server Pages
· Second tutorial: A Small BSP Application and A Small BSP Application with HTMLB
· Third tutorial: Our First Online Bookshop
· Fourth tutorial: Further Developing the Bookshop
· A small Tutorial is also available for your first steps with the Model View Controller design pattern.
· For a more complex MVC tutorial based on the third tutorial, see: Our Little Online Bookshop Using MVC and HTMLB
When creating BSP applications, note the browser dependencies described in Note 598860.
steps:
1) start the transaction RZ10.
2) now u u have to select Profile name, so select the INSTANCE Profile from the list of options given with the Profile parameter list.U may find multiple instance profile in the list, so select the profile in which ur server name is given.
3) u will also find three options in the same window.
Administrator data, Basic Maintenance, and Extended Maintenance. So select the last one from that.
4) Now click on change button.
5) here u will find parameter icm/host_name_full, so now set it as FQDN.
6) Now copy ur settings with new version number.
7) Activate that version.
8) And now please restart ur WAS.
So this will set ur FQDN, and also don't forget to login using Admin User.
Now u also check for following service are active in your ICF setting or not,( just start transaction code SICF)
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/def ault_host/sap/public/bc
/default_host/sap/public/bc/ur
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/defaul t_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb
if not then activate all.
check this link
Read this weblog...
/people/brian.mckellar/blog/2003/09/25/bsp-in-depth-fully-qualified-domain-names
http://www.thespot4sap.com/articles/SAP_WAS_Creating_BSP_Apps.asp
it consists of screen shots also
Check it.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm
Regards
Anji

Passing parameter from workitem to bsp page

Hi,
is it possible to pass parameter from workitem to bsp page and also vice versa?

SAP_WAPI_READ_CONTAINER function works well.but i need to pass a parameter to workitem container.
what i am trying to do is;
1-get data by using sap_wapi_read_container
2-change data
3-send changed data back to workitem
my problem is in third step.I am using SAP_WAPI_WRITE_CONTAINER. but it doesnt work.After execution the FM return_code set to 1.
Do u know how to set a variable in workitem?

Download to excel in different tabs from bsp page

Hi all,
I have a requirement in which I have to download to xl-sheet in different tabs based on some conditions from a bsp page.
I am successful in downloading data into different tabs.
Now I had written the piece of code required to download to xl in a function module
and I am calling that function module when pressing a button in bsp page.
When I run the fm seperately its working but when I run it from bsp page its not working.But while debugging I found that the fm is being called and executed perfectly without any errors.
But the xl is not being created on our side.
Can anyone suggest me how to proceed on this.
Helpful answers will be rewarded.
Thanks,
Uga

Hi Raja,
Yes I am using ole objects.
For more clarity I am alos pasting my code.
If this is not possible then please guide how to achieve this in BSP.
*******************CODE*****************************************
include ole2incl.
data: w_cell1 type ole2_object,
w_cell2 type ole2_object.
*--- Ole data Declarations
data: h_excel type ole2_object, " Excel object
h_mapl type ole2_object, " list of workbooks
h_map type ole2_object, " workbook
h_zl type ole2_object, " cell
h_f type ole2_object, " font
gs_interior type ole2_object, " Pattern
worksheet type ole2_object,
h_cell type ole2_object,
h_cell1 type ole2_object,
range type ole2_object,
h_sheet2 type ole2_object,
h_sheet3 type ole2_object,
gs_font type ole2_object,
flg_stop(1) type c.
Internal table Declaration
data:gt_kna1 type standard table of kna1,
     gt_knvv type standard table of knvv,
     wa_kna1 type kna1,
     wa_knvv type knvv.
types: data1(1500) type c,
ty type table of data1.
data: it type ty with header line,
it_2 type ty with header line,
it_3 type ty with header line,
rec type sy-tfill,
deli(1) type c,
l_amt(18) type c.
data: begin of hex,
tab type x,
end of hex.
field-symbols: <fs> .
     constants cns_09(2) type n value 09.
assign deli to <fs> type 'X'.
hex-tab = cns_09.
<fs> = hex-tab.
data gv_sheet_name(20) type c .
SELECT kunnr name1
INTO corresponding fields of table gt_kna1
FROM kna1
UP TO 1000 ROWS.
SELECT kunnr vkorg
INTO corresponding fields of table gt_knvv
FROM knvv
UP TO 3 ROWS.
loop at gt_kna1 into wa_kna1.
concatenate wa_kna1-kunnr wa_kna1-name1 into it separated by deli.
append it.
clear it.
endloop.
loop at gt_knvv into wa_knvv.
concatenate wa_knvv-kunnr wa_knvv-vkorg into it_2 separated by deli.
append it_2.
clear it_2.
endloop.
if h_excel-header = space or h_excel-handle = -1.
*start Excel
create object h_excel 'EXCEL.APPLICATION'.
endif.
call method of h_excel 'Workbooks' = h_mapl.
set property of h_excel 'Visible' = 1.
*add a new workbook
call method of h_mapl 'Add' = h_map.
gv_sheet_name = 'KNA1'.
get property of h_excel 'ACTIVESHEET' = worksheet.
set property of worksheet 'Name' = gv_sheet_name .
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
data l_rc type i.
call method cl_gui_frontend_services=>clipboard_export
importing
data = it[]
changing
rc = l_rc
exceptions
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
others = 4.
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 1.
PERFORM err_hdl.
call method of h_excel 'Range' = range
exporting
#1 = w_cell1
#2 = w_cell2.
call method of range 'Select'.
*PERFORM err_hdl.
call method of worksheet 'Paste'.
****for second sheet**********
GV_SHEET_NAME = '2ND SHEET'.
gv_sheet_name = 'Knvv'.
get property of h_excel 'Sheets' = h_sheet2 .
call method of h_sheet2 'Add' = h_map.
set property of h_map 'Name' = gv_sheet_name .
get property of h_excel 'ACTIVESHEET' = worksheet.
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
call method cl_gui_frontend_services=>clipboard_export
importing
data = it_2[]
changing
rc = l_rc
exceptions
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
others = 4.
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 1.
PERFORM err_hdl.
call method of h_excel 'Range' = range
exporting
#1 = w_cell1
#2 = w_cell2.
call method of range 'Select'.
PERFORM err_hdl.
call method of worksheet 'Paste'.
Can you people give me inputs so that I can proceed further.
Thanks,
Uga

Master Table for Work Items from BSP Application

hello guys,
just want to ask if there is a master table for work items (and other details) from BSP application?

Hi,
Ya its true but i want to connect my customized application to UWL in Enterprise Portal and there after approval i want my workitems to be punched in R/3 system.Is there any source code available,so that my application directly contact UWL in sap enterprise Portal as a link or workitems where user should have an option to approve or reject.
If u have any idea plz let me know.
Thanks in Advance
Regards
Santosh Saraf

Call ITS from BSP Application

i have created a ITS screen which in turn calls a Abap report
I want to call this ITS screen from a BSP application .
Could you please provide some sample code which is used to call ITS from BSP application..
Useful answers will be rewarded
Thanks

Since it is related to both ITS and BSP i thought i can post it in both. and also i didnt get answers for the queries..... for a long time. Anyhow i will take your suggestion for my future query.
i hv done using iframe to call my ITS application.
I can able to call the Bsp application whichin turn calls its screen abap program.
while executing , the selecting the directory from the file browse pop up doesnt work for downloading the file
becos the client , they will not change the settings related to applet in the internet browser for security reasons.
I hav to make it some how to make it work in the portal which calls this BSP application..
at the moment i mapped this BSP application to the user role in the SUS Portal . but it appears in the SUS portal . but i m not able to click the application and also handsymbol is not seen while bringing the mouse to that area.
Could you please tell me , how to use Action_id for that particular application, Authorisation profile settings.
Kindly give your suggestions asap.

Filtering workitems from SRM approval Inbox

Is there a way to filter non shopping cart related workitems from the "Approval" in box in SRM. We have some custom workflows for E-forms and would like filter these from showing up in the SRM approval inbox.
Thanks in advance for any suggestions.
Regards,
Ram Enaganti.

Hi Ram,
Just curious - if the users aren't going to receive the e-forms work items from the SRM system in their SRM inbox then how are they ever going to execute them?
The easy answer (assuming you have Portal) is to pull all your SRM work into the Universal Worklist and use the UWL configuration to create different views for the different types of work.
Trying to do the same thing in SRM would be a pain and would involve modifying either function module BW02 or the BBPAPPROVAL html templates.
Regards,
Jocelyn

Open UWL workitem from outlook mail

Hello friends,
I have a requirement to execute/open workitem of UWL, which should open from outlook...
I have searched for the same in sdn forum and SAP-WUG, but was unsuccessful to find the exact solution...
I have used 3 technique to achive the requirement, but they are not working and also don't know it is a right approach or not..
1) Maintained the UWL url in SWNCONFIG-> General setting -> INBOX_LINK_URL
2) Configured setting as suggested for Extended notification and UWL in link
http://help.sap.com/saphelp_nw70/helpdata/de/ad/d64842d59fb430e10000000a155106/content.htm
3) Maintained link in SWNCONFIG-> General setting -> WD_HOST and WG_HOST
For getting the UWL workitem link in Outlook wich program needs to be executed --> 1) RSWUWFML2 OR 2) SWN_SELSEN ?
I am not sure the requirement is possible or not...
If it is possible then please suggest the right approach and the techniques I have tried are correct or not?
Thanks and Regards,
Mihir

Dear Karri,
I am very new to workflow. So I don't know why and where webdynpro application is used in my senario... And I will be very obliged to bare with me if I don't understand any terminology of workflow.
I would like to share my complete senario with you.
I have a existing workflow on "COURSE BOOKING" which is already working on production perfectly. And the manager is approving it on UWL for it.
Now the requirement was given like this... I was told that manager has to search the workitem in UWL and had do refresh many time. So they asked me to provide a link or attachment of UWL's workitem directly in notification mail, so that he only needs to click on that link or attachment and required workitem in UWL will open and he/she could make decision.
The requirement is very similary to the notification mail generted by program RSWUWFML2, which has 3 attachements and among them 1 is of Execute Workitem, which open up SAP R/3 inbox's workitem directly. Means he doesn't need to search in SBWP...
So here in my case instead of SAP R/3 inbox workitem, he should open Portal UWL's workitem directly.
Now I come to your question about "webdynpro application launches workitem". I don't know where the webdynpro application comes into the picture...
Please guide...
Thanks & Regards,
Mihir

Passing parameters from BSP to BW report

How to pass parameters from a BSP application to BW in order to execute the BW report

In BW template
a different URL is generated for selection made in each input field.
I have 4 different URL's now.
and when I push the Execute button a URL is generated which looks incomplete and it does not show all the parameters( lot of things are happeninng inside like authorizatins, session handling etc).
The URLS are shown below
URL genarated when the query is executed in the browser:
http://coles33.co.lsil.com:1080/SAP/BW/BEX?variable_screen=X&template_id=0QUERY_TEMPLATE&INFOCUBE=ZAMOEMP1&QUERY=ZAIMREP1
After selecting Location:
http://coles33.co.lsil.com:1080/SAP/BW/BEX?SAP-LANGUAGE=E&PAGENO=1&CMD_ID=1&REQUEST_NO=0&VAR_VALUE_EXT_2=CA01&F4CMD=FINISHED
After selecting org:
http://coles33.co.lsil.com:1080/SAP/BW/BEX?SAP-LANGUAGE=E&PAGENO=1&CMD=PROCESS_VARIABLES&INDEX=3&VAR_VALUE_HELP_SET_LINE=3&REQUEST_NO=0&VAR_VALUE_HELP_SET_5=5
After pushing Insert:
http://coles33.co.lsil.com:1080/SAP/BW/BEX?SAP-LANGUAGE=E&PAGENO=1&CMD=PROCESS_VARIABLES&REQUEST_NO=0&CMD=PROCESS_VARIABLES&SUBCMD=VAR_NEW_LINES&VARID=WNTEST1%200001
After making second selection for org:
http://coles33.co.lsil.com:1080/SAP/BW/BEX?SAP-LANGUAGE=E&PAGENO=1&CMD=PROCESS_VARIABLES&INDEX=4&VAR_VALUE_HELP_SET_LINE=4&REQUEST_NO=0&VAR_VALUE_HELP_SET_15=15
After selecting FLSA:
http://coles33.co.lsil.com:1080/SAP/BW/BEX?SAP-LANGUAGE=E&PAGENO=1&CMD_ID=2&REQUEST_NO=0&VAR_VALUE_EXT_5=EX&F4CMD=FINISHED
after selecting date:
NO URL GENERATED
After pushing Execute:
http://coles33.co.lsil.com:1080/SAP/BW/BEX?SAP-LANGUAGE=E&PAGENO=1&CMD=PROCESS_VARIABLES&REQUEST_NO=0&CMD=PROCESS_VARIABLES&SUBCMD=VAR_SUBMIT&VARID=
I am not able to understand how to call this url from BSP page.( I also have multi-selection for location and org)
regards
Aditya

Executing a workitem from BSP

Similar Messages

Maybe you are looking for