Executing Commands Title

Hi everyone,
When I open a VI file, I see an additional title "Executing commands" before the title of the VI in the windows title bar. However, not all of the files show the same thing. What does it mean? How to remove this?
thx
Solved!
Go to Solution.

Hai,
If you would like to change the title bar heading got to  File>>VI Properties>>Window appearence>>
 You have something called "Window title".  When the text is changed there it reflects in the window title bar.
Hope this helps.  Revert back for any queries.
With regards,
JK
(Certified LabVIEW Developer)
Give Kudos for Good Answers, and Mark it a solution if your problem is solved.

Similar Messages

  • Diadem runtime error while executing command "SchemeMeasStar"

    Hello:
    I used DIAdem9.0 and DAQCard6062E to acquire 16 channel data. I collected 65536 data for every channel. Whereas After the data acquisition stopped, an Error Message would poped up, but the data is still stored in data portal. the Error is like follows:
    -Error- DIAdem
    Runtime Error While Executing Command "SchemeMeasStar"
    Error Type: UNKNOWN
    Error Address:00001720
    Module Name:GFSBase.Dll
    Would you like to give me some suggestions?
    thanks very much
    jing

    Dear MarcusP:
    Thank you very much.
    your solution really works. The attached is the detailed information of the problem. Would you like to tell me more about the prolem and how to solve the problem thoroughly.
    Thank you very much.
    yours
    Jing
    Attachments:
    DIAdem_Error.doc ‏305 KB

  • Error while executing "" command Error type ACCESS VIOLATION Error Address: 0006898E Module name:gfsdesk.DLL

    Hi All,
    I'm using diadem from .net Program. While on the run I'm getting the following error.
    Error While executing "" Command
    Error type ACCESS VIOLATION
    Error Address: 0006898E
    Module name:gfsdesk.DLL
    Anyone have any idea why this is happening?
    regards,
    Swaroop

    Hi Swaroop,
    It would be helpful to better understand what your code really does. The information that you called DIAdem from your enviroenment is not yet sufficient to understand what the problem might be.
    Andreas

  • Just installed Lion and the Magic TrackPad and I am having a problem with one click commands.  I have to hit the pad fairly hard with one finger to get it to accept the command.  Is this normal, is there another way that I am suppose to execute commands?

    Just installed Lion and the Magic TrackPad and I am having a problem with one click commands.  I have to hit the pad fairly hard with one finger to get it to accept the command.  Is this normal, is there another way that I am suppose to execute commands?

    No you just need to turn on Tap to Click. Go into System Preferences - Trackpad and click the Point to Click tab and select the first box which will say Tap to Click and you should be in business.

  • How to execute command(program) from external file in Oracle SQL developer

    Hi,
    Does anyone know, Oracle SQL developer version 1.0.0.14.67 got any function that can execute command from an external file?
    Example, i have 100 insert SQL inside a text file,
    and i want to use Oracle SQL developer to execute it. How do i read from my text file? Thanks a lots.

    If you're new to Oracle, do yourself and us a favour: read some tutorials and manuals. What sqldev's worth, better download the latest version (1.1.2), lots of fixes and enhancements...
    Now for the big popper: to run an external file: @file
    Best of luck,
    K.

  • Problem in using JDBC Execute commands(Update & Delete Only) with af:Table

    HI Everyone,
    I have one issue with Updating and Deleting Row Data using JDBC Execute commands.
    Suppose In My Application i have two pages, in Page 1 I have Two Command Buttons(Delete and Save) and One Input TextBox to write the String to be stored in the Database. and Page 2 where the result Table is shown and table is binded with a ViewObject, Now When User Types some String in InTB and click Save then By Programmatically I'm searching, that string is already present in database or not, if it is already exist then Save button converts in Update button and instead of inserting it allows user to Update the String already exist in database.
    Everything is working fine but the problem comes when i put those all buttons on the same page where result table is present.After putting all things on the same page and When i click save button to insert new String it is Successfully inserting but when any of other action is performed like updating or Deleting the existing one.. then my application just hanged and then nothing I able to do.
    Please Help me to understand this problem and give me the solution for this..
    Thanks
    Fizzz...

    Hi frank,
    Thanks to reply me...
    I'm refreshing table's iterator on each command button's action to reflect the changed result... and i'm sorry i mentioned two pages in my project.. actually these are two forms in the same page..which conditionally changed its renderer properties.. its working fine when only one form is renderred and the otherside when both are rendered then it is not working.
    Hope this change will help you to understand the problem.. if something else you are looking for then please tell me..
    Thanks
    Fizzz...

  • Lom doesn't execute commands

    I'm new in Sun, i just recieved a sun v100 server, i already connected the server to a workstation (using the hyperterminal tool) and it seemmed to be fine... however when the LOM> prompt appears and i try to introduce various commands but it does nothing.
    LOMlite starting up.
    CPU type: H8/3437S, mode 3
    Ram-test: 2048 bytes OK
    Initialising i2c bus: OK
    Searching for EEPROMs: 50(cfg)
    I2c eeprom @50: OK
    i2c bus speed code 01... OK
    Probing for lm80s: none
    Probing for lm75s: 48
    Initialising lm75 @48: OK
    System functions: PSUs fans breakers rails gpio temps host CLI ebus clock
    LOMlite console
    lom>
    LOM event: +0h0m0s LOM booted
    lom>poweron
    (it does nothing...)
    also when i turn the server on with the on/standby switch it also seems to be starting fine, but again when the ok prompt is displayed i try to execute commands and it does again nothing.
    Firmware CORE Sun Microsystems, Inc.
    @(#) core 1.0.18 2002/05/23 18:22
    Software Power ON
    Verifying NVRAM...Done
    Bootmode is 0
    MCR0 = 57b2ce06
    MCR1 = 80008000
    MCR2 = cff0ffff
    MCR3 = b00003ff
    Ecache Size = 512 KB
    Clearing E$ Tags Done
    Clearing I/D TLBs Done
    Probing memory
    Done
    MEMBASE=0xc0000000
    MEMSIZE=0x20000000
    Clearing memory...Done
    Turning ON MMUs Done
    Copy ROM to RAM (154720 bytes) Done
    Orig PC=0x1fff0007edc New PC=0xf0f07f34
    Processor Speed=648MHz
    Looking for Dropin FVM ... found
    Decompressing Client Done
    Transferring control to Client...
    Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
    Probing upa at 1f,0 pci
    Probing upa at 0,0 SUNW,UltraSPARC-IIe (512 Kb)
    Loading Support Packages: kbd-translator
    Loading onboard drivers:
    Probing /pci@1f,0 Device 7 isa dma rtc power SUNW,lomh serial serial
    flashprom
    Probing /pci@1f,0 Device 3 pmu i2c temperature dimm dimm dimm dimm
    i2c-nvram idprom motherboard-fru ppm beep fan-control
    lomp
    Probing Memory Bank #0 512 Megabytes
    Probing Memory Bank #1 512 Megabytes
    Probing Memory Bank #2 512 Megabytes
    Probing Memory Bank #3 512 Megabytes
    Probing /pci@1f,0 Device 7
    Probing /pci@1f,0 Device 3
    Probing /pci@1f,0 Device c ethernet
    Probing /pci@1f,0 Device 5 ethernet
    Probing /pci@1f,0 Device a usb
    Probing /pci@1f,0 Device d ide disk cdrom
    todm5819 Sun Fire V100 (UltraSPARC-IIe 648MHz), No Keyboard
    OpenBoot 4.0, 2048 MB memory installed, Serial #53320536.
    Ethernet address 0:3:ba:2d:9b:58, Host ID: 832d9b58.
    Environment monitoring: disabled
    ok boot
    (again... did nothing)
    i think is a hyperterminal configuration problem but please advide.
    thanks in advance.

    I think I took the wrong path to validate the New Zealand specific tax number. Is it possible to set some rules in PRST1_005 in table T005.
    If this is possible then please pass me the steps description.
    Thanks.
    Naz

  • ERROR: executing command  /usr/openv/netbackup/bin/bpbackup

    Hi,
    Online backup in one of our integration systems is failing with the followin reasons                                                                               
    Status = 58 : can't connect to client
    Status = 54 : timed out connecting to client
    The complete work log is
    [843860.00] Backup started 08/29/2007 07:21:27                                                                               
    [843860.00]                                                                               
    [983220.02] Backup started 08/29/2007 07:21:27                                                                               
    [983220.02]                                                                               
    [880690.03] Backup started 08/29/2007 07:21:27                                                                               
    [880690.03]                                                                               
    [1085482.01] Backup started 08/29/2007 07:21:27                                                                               
    [1085482.01]                                                                               
    [843860.00] 07:22:07 Initiating backup                                                                               
    [983220.02] 07:22:02 Initiating backup                                                                               
    [880690.03] 07:22:12 Initiating backup                                                                               
    [983220.02] 07:22:34 INF - Waiting for mount of media id MY0015 on server spnb6master.apac.gdc for writing.                                                                               
    [843860.00] 07:22:49 INF - Processing /oracle/OMI/sapdata1/undo_1/undo.data1                                                                               
    [843860.00] 07:22:49 /                                                                               
    [843860.00] 07:22:49 /oracle/                                                                               
    [843860.00] 07:22:49 /oracle/OMI/                                                                               
    [843860.00] 07:22:49 /oracle/OMI/sapdata1/                                                                               
    [843860.00] 07:22:49 /oracle/OMI/sapdata1/undo_1/                                                                               
    [880690.03] 07:24:35 INF - Processing /oracle/OMI/sapdata3/omi_5/omi.data5                                                                               
    [880690.03] 07:24:35 /                                                                               
    [880690.03] 07:24:35 /oracle/                                                                               
    [880690.03] 07:24:35 /oracle/OMI/                                                                               
    [880690.03] 07:24:35 /oracle/OMI/sapdata3/                                                                               
    [880690.03] 07:24:35 /oracle/OMI/sapdata3/omi_5/                                                                               
    [983220.02] 07:24:55 INF - Beginning backup on server spnb6master.apac.gdc of client ipcby104b1.apac.gdc.                                                                               
    ERROR: executing command  /usr/openv/netbackup/bin/bpbackup -w -t 17  -S spnb6masterb1.apac.gdc -c APAC_SAP_DC1 -s U_xx_1m -L /oracle/GIP/sapbackup/backint/.backint.log.1.1188372087.561352 -k ".bdwaniws.lst561352" -f /oracle/GIP/sapbackup/backint/.backint
    Status = 58 : can't connect to client                                                                               
    [1085482.01] EXIT STATUS 58: can't connect to client                                                                               
    ERR - job (1085482) failed status (58)                                                                               
    [880690.03] 07:25:38 /oracle/OMI/sapdata3/omi_5/omi.data5                                                                               
    [880690.03] 07:25:38 INF - Processing /oracle/OMI/sapdata3/omi640_11/omi640.data11                                                                               
    [880690.03] 07:25:38 /oracle/OMI/sapdata3/omi640_11/                                                                               
    [983220.02] 07:26:25 INF - Server status = 54                                                                               
    [880690.03] 07:26:41 /oracle/OMI/sapdata3/omi640_11/omi640.data11                                                                               
    [880690.03] 07:26:41 INF - Processing /oracle/OMI/sapdata4/omi_6/omi.data6                                                                               
    [880690.03] 07:26:41 /oracle/OMI/sapdata4/                                                                               
    [880690.03] 07:26:41 /oracle/OMI/sapdata4/omi_6/                                                                               
    [880690.03] 07:27:44 /oracle/OMI/sapdata4/omi_6/omi.data6                                                                               
    [880690.03] 07:27:44 INF - Processing /oracle/OMI/sapdata4/omi_9/omi.data9                                                                               
    [880690.03] 07:27:44 /oracle/OMI/sapdata4/omi_9/                                                                               
    ERROR: executing command  /usr/openv/netbackup/bin/bpbackup -w -t 17  -S spnb6masterb1.apac.gdc -c APAC_SAP_DC1 -s U_xx_1m -L /oracle/GIP/sapbackup/backint/.backint.log.2.1188372087.561352 -k ".bdwaniws.lst561352" -f /oracle/GIP/sapbackup/backint/.backint
    Status = 54 : timed out connecting to client                                                                               
    [983220.02] EXIT STATUS 54: timed out connecting to client                                                                               
    ERR - job (983220) failed status (54)                                                                               
    [843860.00] 07:28:28 /oracle/OMI/sapdata1/undo_1/undo.data1                                                                               
    [843860.00] 07:28:28 INF - Processing /oracle/OMI/sapdata1/omi640_4/omi640.data4                                                                               
    [843860.00] 07:28:28 /oracle/OMI/sapdata1/omi640_4/                                                                               
    [880690.03] 07:28:40 /oracle/OMI/sapdata4/omi_9/omi.data9                                                                               
    [880690.03] 07:28:40 INF - Processing /oracle/OMI/sapdata1/omi640_3/omi640.data3                                                                               
    [880690.03] 07:28:40 /oracle/OMI/sapdata1/                                                                               
    [880690.03] 07:28:40 /oracle/OMI/sapdata1/omi640_3/                                                                               
    [843860.00] 07:29:32 /oracle/OMI/sapdata1/omi640_4/omi640.data4                                                                               
    [843860.00] 07:29:32 INF - Processing /oracle/OMI/sapdata2/omi640_10/omi640.data10                                                                               
    [843860.00] 07:29:32 /oracle/OMI/sapdata2/                                                                               
    [843860.00] 07:29:32 /oracle/OMI/sapdata2/omi640_10/                                                                               
    [880690.03] 07:29:47 /oracle/OMI/sapdata1/omi640_3/omi640.data3                                                                               
    [880690.03] 07:29:47 INF - Processing /oracle/OMI/sapdata4/omi640_13/omi640.data13                                                                               
    [880690.03] 07:29:47 /oracle/OMI/sapdata4/                                                                               
    [880690.03] 07:29:47 /oracle/OMI/sapdata4/omi640_13/                                                                               
    [843860.00] 07:31:03 /oracle/OMI/sapdata2/omi640_10/omi640.data10                                                                               
    [843860.00] 07:31:03 INF - Processing /oracle/OMI/sapdata2/omi640_9/omi640.data9                                                                               
    [843860.00] 07:31:03 /oracle/OMI/sapdata2/omi640_9/                                                                               
    [880690.03] 07:31:20 /oracle/OMI/sapdata4/omi640_13/omi640.data13                                                                               
    [880690.03] 07:31:20 INF - Processing /oracle/OMI/sapdata2/omi640_8/omi640.data8                                                                               
    [880690.03] 07:31:20 /oracle/OMI/sapdata2/                                                                               
    [880690.03] 07:31:20 /oracle/OMI/sapdata2/omi640_8/                                                                               
    [843860.00] 07:32:29 /oracle/OMI/sapdata2/omi640_9/omi640.data9                                                                               
    [843860.00] 07:32:29 INF - Processing /oracle/OMI/sapdata4/omi_13/omi.data13                                                                               
    [843860.00] 07:32:29 /oracle/OMI/sapdata4/                                                                               
    [843860.00] 07:32:29 /oracle/OMI/sapdata4/omi_13/                                                                               
    [880690.03] 07:32:44 /oracle/OMI/sapdata2/omi640_8/omi640.data8                                                                               
    [880690.03] 07:32:44 INF - Processing /oracle/OMI/sapdata4/omi640_15/omi640.data15                                                                               
    [880690.03] 07:32:44 /oracle/OMI/sapdata4/                                                                               
    [880690.03] 07:32:44 /oracle/OMI/sapdata4/omi640_15/                                                                               
    [843860.00] 07:33:04 /oracle/OMI/sapdata4/omi_13/omi.data13                                                                               
    [843860.00] 07:33:04 INF - Processing /oracle/OMI/sapdata1/system_1/system.data1                                                                               
    [843860.00] 07:33:04 /oracle/OMI/sapdata1/                                                                               
    [843860.00] 07:33:04 /oracle/OMI/sapdata1/system_1/                                                                               
    [843860.00] 07:33:23 /oracle/OMI/sapdata1/system_1/system.data1                                                                               
    [843860.00] 07:33:23 INF - Client completed sending data for backup                                                                               
    [843860.00]                                                                               
    [880690.03] 07:33:18 /oracle/OMI/sapdata4/omi640_15/omi640.data15                                                                               
    [880690.03] 07:33:18 INF - Processing /oracle/OMI/sapdata4/omi_14/omi.data14                                                                               
    [880690.03] 07:33:18 /oracle/OMI/sapdata4/omi_14/                                                                               
    [880690.03] 07:33:49 /oracle/OMI/sapdata4/omi_14/omi.data14                                                                               
    [880690.03] 07:33:49 INF - Processing /oracle/OMI/sapbackup/cntrlOMI.dbf                                                                               
    [880690.03] 07:33:49 /oracle/OMI/sapbackup/                                                                               
    [880690.03] 07:33:50 /oracle/OMI/sapbackup/cntrlOMI.dbf                                                                               
    [880690.03] 07:33:50 INF - Client completed sending data for backup                                                                               
    [880690.03]                                                                               
    [843860.00] 07:34:47 INF - Server status = 0                                                                               
    [880690.03] 07:34:57 INF - Server status = 0                                                                               
    [880690.03] 07:36:02 INF - Backup by oraomi on client ipcby104b1.apac.gdc using policy APAC_SAP_DC1, sched U_xx_1m: the requested operation was successfully completed.                                                                               
    [880690.03]                                                                               
    [843860.00] 07:36:07 INF - Backup by oraomi on client ipcby104b1.apac.gdc using policy APAC_SAP_DC1, sched U_xx_1m: the requested operation was successfully completed.                                                                               
    [843860.00]                                                                               
    ERROR: wait for process to complete                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omi640_12/omi640.data12                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata2/omi640_7/omi640.data7                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata3/omi_1/omi.data1                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata3/omi_2/omi.data2                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata3/omi_3/omi.data3                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata3/omi_4/omi.data4                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata1/system_2/system.data2                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omi_10/omi.data10                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omi_11/omi.data11                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omi_12/omi.data12                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata2/omi640_6/omi640.data6                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata1/system_3/system.data3                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omiusr_1/omiusr.data1                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omi_7/omi.data7                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omi_8/omi.data8                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omi640_14/omi640.data14                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata1/omi640_1/omi640.data1                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata1/omi640_2/omi640.data2                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata1/omi640_5/omi640.data5                                                                               
    BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata1/system_1/sysaux01.dbf                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata1/system_1/system.data1                                                                               
    #SAVED.... NS1188352332                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata2/omi640_10/omi640.data10                                                                               
    #SAVED.... NS1188352332                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata4/omi_13/omi.data13                                                                               
    #SAVED.... NS1188352332                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata2/omi640_9/omi640.data9                                                                               
    #SAVED.... NS1188352332                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata1/undo_1/undo.data1                                                                               
    #SAVED.... NS1188352332                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata1/omi640_4/omi640.data4                                                                               
    #SAVED.... NS1188352332                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata2/omi640_8/omi640.data8                                                                               
    #SAVED.... NS1188352337                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata4/omi_6/omi.data6                                                                               
    #SAVED.... NS1188352337                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata4/omi_14/omi.data14                                                                               
    #SAVED.... NS1188352337                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata4/omi_9/omi.data9                                                                               
    #SAVED.... NS1188352337                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapbackup/cntrlOMI.dbf                                                                               
    #SAVED.... NS1188352337                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata4/omi640_13/omi640.data13                                                                               
    #SAVED.... NS1188352337                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata3/omi640_11/omi640.data11                                                                               
    #SAVED.... NS1188352337                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata4/omi640_15/omi640.data15                                                                               
    #SAVED.... NS1188352337                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata1/omi640_3/omi640.data3                                                                               
    #SAVED.... NS1188352337                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    #FILE..... /oracle/OMI/sapdata3/omi_5/omi.data5                                                                               
    #SAVED.... NS1188352337                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    BR0279E Return code from 'backint -u OMI -f backup -i /oracle/OMI/sapbackup/.bdwaniws.lst -t file -p /oracle/OMI/102_64/dbs/initOMI.utl -c': 2                                                                               
    BR0232E 16 of 36 files saved by backup utility                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52                                                                               
    BR0231E Backup utility call failed                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.54                                                                               
    BR0317I 'Alter database end backup' successful                                                                               
    BR0056I End of database backup: bdwaniws.anf 2007-08-29 07.36.52                                                                               
    BR0280I BRBACKUP time stamp: 2007-08-29 07.36.55                                                                               
    BR0054I BRBACKUP terminated with errors                  
    Thanks,
    deepthi

    While surfing the net i got one solution
    NetBackup patch S0820462 corrects this by ensuring file name uniqueness with a timestamp value included in the name. Obtain this patch by contacting VERITAS Technical Support. Once you have the patch, follow the instructions included in the file patchS0820462.README which accompanies the patch.
    I got the idea but i dont understand where i will get the info regarding the files ??
    and how this patch has to be installed in the system.

  • Execute commands in multiple Cisco devices simultaneously

    Hi all:
    We have a big network and every time we need to execute commands in switches and routers, it takes a lot going one by one to do it. Is there any way, ie using special software, or Linux, scripts, whatever that can be used to execute same commands in all devices at the same time?
    Thanks in advance
    W.

    in CiscoWorks LMS there is the  RME NetConfig task which can do this for you. You can download an eval copy of LMS here (90 day eval for 100 devices)
    http://www.cisco.com/go/nmsevals or
    https://cisco.mediuscorp.com/market/networkers/listSubCat.se.work?TRGT=8&/nxt/rcrs/=1126
    to get the solaris version
    but there is also the the "Cisco Enhanced Device Interface" which perhaps could be a solituon for you:
    http://www.cisco.com/en/US/products/ps6456/tsd_products_support_series_home.html
    not forget to mention the Kiwi Cat Tools:
    http://www.kiwisyslog.com/kiwi-cattools-overview/

  • Execute  commands/statements in txt file supplied to plsql procedure

    Hi,
    I need to execute commands which are in txt file , this txt filepath is supplied to the procedure.
    In the procedure i want to open the txt file and read the commands and run the commands.
    Please help on this .
    Edited by: 904032 on Jun 26, 2012 12:02 AM

    The fact that you are supplying a file path (more correctly known as a directory) is going to be your first problem. Security within Oracle means that access to files on the file server require a directory object to be specified and these directory objects refer to a specific directory on the file server. If you're going to be passing different directories into your procedure then you're going to have to have different directory objects set up for all the possible directories that can be accessed (or issue dynamic DDL to redefine a known directory object each time).
    Once you've done that you can use the UTL_FILE package (http://docs.oracle.com/cd/E11882_01/appdev.112/e25788/u_file.htm#ARPLS70906) to read the contents of the file as lines.
    Then it depends what you mean by "commands" and "statements". Are you referring to operating system commands?... If so you will need to use something like the DBMS_SCHEDULER package to issue a job to run immediately with the appropriate command, as that is able to issue operating system commands, or you are going to have to write some Java code to issue commands for you (plenty of examples if you google). OR, perhaps you are referring to SQL statements? These could possibly be issued using the PL/SQL execute immediate statement, but you will be leaving your database open to SQL injection and major security issues, something that most companies would consider a serious flaw and not want.
    how to read string which is delimited by ';'. or how read each charater in a file ..About time you read the documentation (http://tahiti.oracle.com/). There are functions: SUBSTR and INSTR which can search for things in strings and extract parts of strings, or you can use the more advanced regular expression versions of those REGEXP_SUBSTR and REGEXP_INSTR, or even REGEXP_REPLACE (which is also good for extracting parts of strings).
    If you want a more concise answer, you need to ask a more concise question... {message:id=9360002}

  • Cannot call the execute command from java code

    Hello,
    I like to add a new user via a java web service.
    Establishing a connection to the OC4J MBean server is no problem. I also can execute the commands 'listAllCommands' and 'help' on the MBean. But if i try to call the execute command, i always get an NoSuchMethodException. Looking at the MBeanInfos 'execute' is listed there as an operation.
    Can anyone explain this to me?

    Hi,
    I basically used the code described at http://download.oracle.com/docs/cd/B32110_01/web.1013/b28952/mbeans.htm#CIHFDJBJ to connect to the MBeanServer.
    To invoke 'execute' i used
    MBeanServerConnection con= jmxCon.getMBeanServerConnection();
    con.invoke(new ObjectName(MBEAN_NAME), "execute", new Object[] { COMMAND }, new String[] {});
    where MBEAN_NAME is the ObjectName of the CommandService MBean and COMMAND is a String like "identity add ..."

  • Execute Command fron Java Program

    Hi All,
    I am trying to execute a command from Java Application, but iam not getting any result. My problem is:-
    1- Open a terminal.
    2- execute command.
    The same is working fine in windows , the step for windows are:-
    1- execute cmd.exe
    2- go to prompt
    3- execute command.
    How to do it for Solaris 10 ??? Any cmd.exe equivalent for solaris terminal???

    This is done in the exact same way. You open a terminal (depending on your gui its called "console" or "this computer" (CDE), and "Gnome console" (iirc) in the Java desktop) and then you're home free. "javac", "java", etc. should all be in your search path.
    If not look in /usr/java.

  • Using AppleScript "execute" command in Acrobat

    Acrobat's scripting dictionary has a cryptic description of an "execute" command that is supposed to execute a menu item "as if a user clicked it".
    No information is given as to how to identify the desired menu command except "reference". Huh? Is there documentation or a tutorial on this anywhere?
    Related question, how can AppleScript identify auxiliary windows such as the Document Properties window and its various button bar items and other fields?
    Here's one simple thing I'm trying to accomplish: I'm using System Events to script some items like keywords in the Document Properties window. Sometimes it takes several seconds for a document to open. Without putting in huge wait loops, I'd like to execute the menu item "File: Properties..." and then wait for the window to open using a loop like this:
    repeat until exists <some way to identify the Document Properties window>
    end repeat
    Any hope of doing stuff like this? I already tore out enough hair trying to get AppleScript's "do script" command to work (only lately having discovered that the script file apparently must be plain text, no Unicode).

    The Macintosh keyboard does not have a true "Enter" key any more - not on the MacBook Pro or the iBooks. Modifier keys do not seem to work either. I've turned on the System Prefs > Keyboard & made it appear in the top Menu Bar. From this menu choose "Show Keyboard Viewer" to see how keys + Return are displayed. Only the Function key changes the Return key. Function + Delete is a forward delete. But Function + Return is just another Return. So any highlighted text is deleted! Command + Return stays on the same line and selected text remains. I will try KeyRemap4MacBook utility then consider buying a USB numeric keypad. Urggh.

  • Unable to execute command adprmkey in upgrading 11i to 12.1.1

    Hello Team Leaders:
    I am in the process of upgrading EBS 11.5.10.2 to Release 12.1.1. I have imported the database, Layed down the apps and have started applying patches. While running adpatch I have encountered:
    java.lang.Exception: ERROR: Unable to execute command: adprmkey /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar/fndlist.jar.tmp
    at oracle.apps.ad.jri.util.JarSignerOptions.getOptions(JarSignerOptions.java:50)
    at oracle.apps.ad.jri.util.JarSignUtils.signJarWithJarsigner(JarSignUtils.java:132)
    at oracle.apps.ad.jri.adjmx.mergeAndExtract(adjmx.java:1313)
    at oracle.apps.ad.jri.adjmx.main(adjmx.java:970)
    Done Analyzing fndlist.jar : Fri Oct 26 2012 16:06:42
    ERROR: The following jars failed to get generated properly.
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar/fndforms.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar/fndewt.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar/fndewtpv.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar/fndaol.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar/wfapi.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar/fndaroraclnt.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar/fndmail.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar/fndactiv.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar/fndformsi18n.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar/mapclient.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar/fndxmlparserv2.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/cs/jar/cs.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/az/jar/azwizard.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/jtf/jar/jtfgrid.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/cct/jar/cctbasic.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/msd/jar/msejar.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/wps/jar/wpsgantt.jar
    /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar/fndlist.jar
    I then tried relinking on jar manually:
    cd /u02/applfint/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar
    ll fndaroraclnt.jar
    -rw-r--r-- 1 applfint dba 1135766 Apr 1 2009 fndaroraclnt.jar
    adrelink.sh force=y "fndaroraclnt.jar "
    Errors:
    adrelink: error: Product library for product "fndaroraclnt.jar" not found.
    "fndaroraclnt.jar" might not be listed correctly in your OFT1_ofintest.env file,
    you may be missing some files for product "fndaroraclnt.jar",
    or "fndaroraclnt.jar" could be an invalid product.
    adrelink will not try to link product "fndaroraclnt.jar".
    Continuing work on other products...
    adrelink is exiting with status 1
    What is my problem?
    Mathias

    Hi Hussein,
    Following command in (11864081 12.1.3 Java.lang.Exception: Unable To Find Or Read Parameter File /d01/oracle/R12DEV/apps/a [ID 1479911.1]), I have executed:
    adrelink.sh force=y "ad adprmkey"
    And the output errors are:
    /usr/lib/gcc/x86_64-redhat-linux/4.4.4/32/libgcc_s.so: undefined reference to `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [u02/applfint/apps/apps_st/appl/ad/12.0.0/bin/adprmkey] Error 1
    Done with link of ad executable 'adprmkey' on Sun Oct 28 01:59:50 EDT 2012
    Relink of module "adprmkey" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure. Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /u02/applfint/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    I checked and do have permissions on /u02/applfint/apps/apps_st/appl/ad/12.0.0/bin:
    drwxr-xr-x 2 applfint dba 4096 Oct 28 02:10 bin
    Browsing around the system I noticed:
    1) three broken links in /usr/lib/gcc/x86_64-redhat-linux/4.4.4/32:
    libgfortran.so -> ../../../../libgfortran.so.3.0.0
    libmudflapth.a -> ../../../i686-redhat-linux/4.4.4/libmudflapth.a
    libmudflap.a -> ../../../i686-redhat-linux/4.4.4/libmudflap.a
    libgomp.so -> ../../../../libgomp.so.1.0.0
    2) Following MOS note 11864081 12.1.3 Java.lang.Exception. Check this out:
    adrelink.sh force=y "ad adprmkey"
    Failed with:
    usr/lib/gcc/x86_64-redhat-linux/4.4.4/32/libgcc_s.so: undefined reference to `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [u02/applfint/apps/apps_st/appl/ad/12.0.0/bin/adprmkey] Error 1
    Done with link of ad executable 'adprmkey' on Fri Oct 26 18:14:16 EDT 2012
    Relink of module "adprmkey" failed.
    3) My OS :
    uname -a
    Linux ofintest.corp.phillips.com 2.6.32-100.28.5.el6.x86_64 #1 SMP Wed Feb 2 18:40:23 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
    4) rpm -q glibc
    glibc-2.12-1.80.el6_3.5.x86_64
    glibc-2.12-1.80.el6_3.5.i686
    5) gcc -v
    Using built-in specs.
    Target: x86_64-redhat-linux
    Configured with: ../configure prefix=/usr mandir=/usr/share/man infodir=/usr/share/info with-bugurl=http://bugzilla.redhat.com/bugzilla enable-bootstrap enable-shared enable-threads=posix enable-checking=release with-system-zlib enable-__cxa_atexit disable-libunwind-exceptions enable-gnu-unique-object enable-languages=c,c++,objc,obj-c++,java,fortran,ada enable-java-awt=gtk disable-dssi with-java-home=/usr/lib/jvm/java-1.5.0-gcj-1.5.0.0/jre enable-libgcj-multifile enable-java-maintainer-mode with-ecj-jar=/usr/share/java/eclipse-ecj.jar disable-libjava-multilib with-ppl with-cloog with-tune=generic with-arch_32=i686 --build=x86_64-redhat-linux
    Thread model: posix
    gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC)
    6) g++ --version
    g++ (GCC) 4.4.4 20100726 (Red Hat 4.4.4-13)
    Copyright (C) 2010 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions. There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    7) ls -al /usr/bin | grep gcc
    lrwxrwxrwx. 1 root root 3 Oct 17 12:28 cc -> gcc
    -rwxr-xr-x 2 root root 268088 Dec 1 2010 gcc
    -rwxr-xr-x 2 root root 268088 Dec 1 2010 x86_64-redhat-linux-gcc
    8) rpm -qf /usr/bin/x86_64-redhat-linux-gcc
    gcc-4.4.4-13.el6.x86_64
    I hope this information helps in troubleshooting this issue for us.
    Thanks
    Mathias
    Thanks,

  • Could not execute command "getState" for server server01 using nodemanager

    Hi,
    I have built a weblogic 9.1 env with 2 managed servers running on different boxes from the admin server.
    I am having problems in starting the managed servers using the nodemanager. I get the following error message in the Admin server log:
    <Error> <NodeManager> <BEA-300034> <Could not execute command "getState" for server "******" using the node manager. Reason: I/O error while reading domain directory: java.io.FileNotFoundException: Domain directory '/opt/bea/weblogic91/common/nodemanager' invalid (domain salt file not found).>
    I get the following message on the admin console:
    For server ******, the Node Manager associated with machine ******-machine is not reachable.
    All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager. No action will be performed.
    I can start the managed server using the "startMangedWeblogic.sh" without any issues.
    Any help on this would be greatly appreciated.
    Thanks

    one more thing to add:
    I get the following error in the Managed server log:
    <I/O error while reading domain directory: java.io.FileNotFoundException: Domain directory '/opt/bea/weblogic91/common/nodemanager' invalid (domain salt file not found)>
    java.io.FileNotFoundException: Domain directory '/opt/bea/weblogic91/common/nodemanager' invalid (domain salt file not found)
    at weblogic.nodemanager.server.DomainManager.initialize(DomainManager.java:74)
    at weblogic.nodemanager.server.DomainManager.<init>(DomainManager.java:46)
    at weblogic.nodemanager.server.NMServer.getDomainManager(NMServer.java:239)
    at weblogic.nodemanager.server.Handler.handleDomain(Handler.java:170)
    at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:104)
    at weblogic.nodemanager.server.Handler.run(Handler.java:64)
    at java.lang.Thread.run(Thread.java:595)

Maybe you are looking for

  • Error when doing a search in the Account Dim

    I get this error sometimes: "The member exists in NEXT...Do you want to expand?" It only happens in the Account dimension and when the view is ID and Description. Any Ideas? Thx.

  • Final Cut Pro X and Mini DV????!!!!!!!

    Hello again. Does anybody know if FCPX works fine with Mini DV (as in like capture, timecode etc.) If not, then what for us with 'old school' tape recording????? Luv Hanne S(o deperately wanting FCPX meet all her needs!!!)

  • Spry drop-down nav bar not working in Netscape 7

    Hello My site is up at www.Frontiers.uk.net. I built a drop down navigation menu using Dreamweaver's new Spry feature. It works fine in IE 6 & 7, Firefox & Mozilla, but in Netscape 7 (the only Netscape I've tested), the dop-down menus don't always ap

  • Fill Fact Table (Transaction) then Master Table

    Dear all I have problem in displaying my Query result. BI 7.0 Within Analyser, it shows attribute that I have filled before in IO's master data, but some of them shown empty because they're not in the IO's master data yet. I found that during uploadi

  • UWL - Administrator Page Giving Error when opened

    Hello Experts, When I am trying to login to: System Administration --> System Configuration -->Universal Worklist & workflow --> Universal Worklist - Administration I get the following error message. Please note that this is happening only in Dev and