Executing InfoPackage Group from ABAP Program

Hi Experts,
I want to execute InfoPackage Group from the ABAP program. I know function module BAPI_IPAK_START which can schedule a single Infopackage at a time.
Please let me know.
Many Thanks,
-Ashish

Hi,
I am using function module BP_EVENT_RAISE for raising a event.My question is which eventid I need to give in the export parameter.
CALL FUNCTION 'BP_EVENT_RAISE'
EXPORTING
EVENTID = ' '
EVENTPARM = ' '
I need to mention some SAP standard event or I can create my own event too.
Because same event I need to put in InfoPackage Group for scheduling.
Regards,
Ashish

Similar Messages

How to execute Infopackage with an ABAP program

Dear All,
I would like to execute an infopackage every 6th day of the month.
Therefore I would like to integrate a program in a process chain executed on a daily basis, and call with this program the execution of the infopackage if day = 6.
Do you know how to execute an infopackage inside an ABAP program ? Which function module use ?
Thanks,
Greg

Hello luminy13,
Just to answer your question on how to start an InfoPackage inside an ABAP program: you can use function module BAPI_IPAK_START. You might also need to use FM BAPI_IPAK_CHANGE to change the scheduling.
However, if the only reason you are creating the ABAP program is to run the InfoPackage at the 6th day of the month, then I don't recommend that you create the ABAP program at all. You can simply schedule the InfoPackage (or the process chain that contains it) on the 6th day of the month. Here's how to do it:
In the scheduling dialog, click the ">>" button. Enter the factory calendar, put 6 is in the workday and then choose "beginning of the month".
Hope this helps.

Execute bsp application from abap program

How can I do to execute a bsp application from abp program ?
I have two parameter in enter : text and language.
And i have one paramenter in exit : translated text.
Thanks for you help.

but how to retrieve the result of the bsp ?
Here is my source code :
data: url type string,
         l_appl type string,
        l_page type string,
        l_params type line of TIHTTPNVP,
        params type TIHTTPNVP.
l_appl = 'ZAPI_TRADUCTION'.
l_page = 'appel.htm'.
l_params-NAME = 'text'.
l_params-value = 'pour le moment test'.
append l_params to params.
call method cl_http_ext_webapp=>create_url_for_bsp_application
    exporting
      bsp_application      = l_appl
      bsp_start_page       = l_page
      bsp_start_parameters = params
    importing
      abs_url              = url.
DATA: http_client TYPE REF TO if_http_client .
DATA: w_string TYPE string ,
      w_result TYPE string ,
      r_str    TYPE string .
DATA: result_tab TYPE TABLE OF string.
CLEAR w_string .
w_string = url.
CALL METHOD cl_http_client=>create_by_url
    EXPORTING
      url                = w_string
    IMPORTING
      client             = http_client
    EXCEPTIONS
      argument_not_found = 1
      plugin_not_active = 2
      internal_error     = 3
      OTHERS             = 4.
      CALL METHOD http_client->send
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2.
      CALL METHOD http_client->receive
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2
      http_processing_failed     = 3.
CLEAR w_result .
w_result = http_client->response->get_cdata( ).
REFRESH result_tab .
In the variable it brings me back the html source code of the BSP rather than run and bring me the result of the BPS.
Thank you for your help.

How to execute os command from ABAP program?

I want to execute some window commands from ABAP. What is the way to do it?

Hi,
See ht e coding below, I have used these Fm to connect to FTP server and get the Files..
*types for the ftp command result internal table
TYPES : BEGIN OF ty_result,
        text TYPE char512,
        END OF ty_result.
data it_result type standard table of ty_result.
*Connect to the FTP server
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      user            = lv_user           " user name pass word to connect
      password        = l_v_pwd
      host            = 'dev.eu.pm.com' " Host name here
      rfc_destination = 'SAPFTPA'   "destination name
*Ask your functional people for the above data
    IMPORTING
      handle          = v_handle
    EXCEPTIONS
      not_connected   = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
ENDIF.
*Changing directory
CONCATENATE 'cd' '<file path>' INTO l_v_cmd SEPARATED BY space.
you can also ser 'DIR in l_v_cmd which opens the directory and all the folders *get into it_result table..
*Execute the FTP Command
CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
      handle        = v_handle
      command       = l_v_cmd
    TABLES
      data          = it_result
    EXCEPTIONS
      tcpip_error   = 1
      command_error = 2
      data_error    = 3
      OTHERS        = 4.
IF sy-subrc <> 0.
ENDIF.
rewards if useful,
regards,
nazeer

Execute webdynpro from abap program and return to the caller program

Guys,
I have a question here.
I know there is a way to call an abap webdynpro application from normal abap program by either using a class method, or use a function module WDY_EXECUTE_IN_PLACE by providing
the webdynpro application or using CALL TRANSACTION statement.
But, is there anyways that we can call the webdynpro application from abap program by supplying data to the webdynpro and display to the user from the portal, and then
once the user do some manipulation on the data, can we transfer back the data to the caller abap program?

hey ,
you can pack any web-dynpro program in tranasaction code and run it from R/3 and not via portal :
search in " SAPTECHNICAL" how to do so - for some reason i cant post a link here
than you can use call transaction .
regards
ASA

How execute one DLL from ABAP

Hi All,
I have to execute one DLL from ABAP, I have pass one file txt to parameters and execute the DLL.
Any could help me?

Check this:
Re: How to call a FrontEnd DLL in ABAP Program
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/vb-function-module-or-dll-in-abap-programming-1659211
http://nonet.dyndns.org/b2e/blogs/index.php/2005/10/30/calling_dll_functions_within_sapgup_via?blog=5

Calling oracle procedure from ABAP program

There is a requirement to call the oracle stored procedure with some input parameter from ABAP program.
Suppose we have order number which is entered by the user in ABAP program.
This order number needs to be passed to oracle stored procedure as an input parameter in the same ABAP program.
We can call the oracle stored procedure without parameter using the following syntax
exec sql
execute procedure <procedure name>
end exec.
But do not know how to execute the oracle stored procedure with some input parameter?

Apologies , following is the correct code.
This will definetly solve your problem.
DATA scarr_carrid TYPE scarr-carrid.
SELECT-OPTIONS s_carrid FOR scarr_carrid NO INTERVALS.
DATA s_carrid_wa LIKE LINE OF s_carrid.
DATA name TYPE c LENGTH 20.
TRY.
    EXEC SQL.
      CREATE FUNCTION selfunc( input CHAR(3) )
        RETURNING char(20);
        DEFINE output char(20);
        SELECT carrname
               INTO output
               FROM scarr
               WHERE mandt = '000' AND
                     carrid = input;
        RETURN output;
        END FUNCTION;
    ENDEXEC.
    LOOP AT s_carrid INTO s_carrid_wa
                     WHERE sign = 'I' AND option = 'EQ'.
      TRY.
         EXEC SQL.
            EXECUTE PROCEDURE selfunc( IN :s_carrid_wa-low,
                                       OUT :name )
          ENDEXEC.
          WRITE: / s_carrid_wa-low, name.
        CATCH cx_sy_native_sql_error.
          MESSAGE `Error in procedure execution` TYPE 'I'.
      ENDTRY.
    ENDLOOP.
    EXEC SQL.
      DROP FUNCTION selfunc;
    ENDEXEC.
CATCH cx_sy_native_sql_error.
    MESSAGE `Error in procedure handling` TYPE 'I'.
ENDTRY.
Reward points if usefull.
Thanks and regards,
Veerendranath.

XML files from ABAP programs

Hi everyone!
Is there a way in ABAP to output XML files? Pls. send code/ function module if any.
From ABAP programs, we are sure that we can output TEXT files, but how about XML files?
The significance of this question is related
Currently we are using XI to interface SAP and AMS, this question for ABAP to produce XML file arose, if for example, the XI server is down and we have to still send data from one system to another. IDocs can also produce XML files, pls confirm. Earlier however, we have preferred XI rather than IDocs to do this. Anyway, any idea regarding this scenario will be greatly appreciated.
Thanks and God bless!
Celeste

Hi,
Please check this sample codes from other thread.
1. itab --- > xml
xml ---> itab.
2. This program will do both.
(just copy paste in new program)
3.
REPORT abc.
*-------------- DATA
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
a(100) TYPE c,
END OF itab.
DATA: xml_out TYPE string .
DATA : BEGIN OF upl OCCURS 0,
f(255) TYPE c,
END OF upl.
DATA: xmlupl TYPE string .
******************************* FIRST PHASE
******************************* FIRST PHASE
******************************* FIRST PHASE
*------------------ Fetch Data
SELECT * FROM t001 INTO TABLE t001.
*------------------- XML
CALL TRANSFORMATION ('ID')
SOURCE tab = t001[]
RESULT XML xml_out.
CALL FUNCTION 'SCMS_STRING_TO_FTEXT'
EXPORTING
TEXT = xml_out
* IMPORTING
* LENGTH =
TABLES
FTEXT_TAB = itab.
*-------------- Download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filetype = 'BIN'
filename = 'd:xx.xml'
TABLES
data_tab = itab.
******************************* SECOND PHASE
******************************* SECOND PHASE
******************************* SECOND PHASE
BREAK-POINT.
REFRESH t001.
CLEAR t001.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'D:XX.XML'
filetype = 'BIN'
TABLES
data_tab = upl.
LOOP AT upl.
CONCATENATE xmlupl upl-f INTO xmlupl.
ENDLOOP.
*------------------- XML
CALL TRANSFORMATION ('ID')
SOURCE XML xmlupl
RESULT tab = t001[]
BREAK-POINT.
Regards,
Ferry Lianto

Is it possible to call website from ABAP Program?

Hi Experts,
       Is it possible to call website from ABAP Program?
It is very Urgent Help me.
Regards,
Ashok.

Hi,
Check the following program:
REPORT ZURL NO STANDARD PAGE HEADING.
DATA: BEGIN OF URL_TABLE OCCURS 10,
L(25),
END OF URL_TABLE.
URL_TABLE-L = 'http://www.lycos.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.hotbot.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.sap.com'.APPEND URL_TABLE.
LOOP AT URL_TABLE.
SKIP. FORMAT INTENSIFIED OFF.
WRITE: / 'Single click on '.
FORMAT HOTSPOT ON.FORMAT INTENSIFIED ON.
WRITE: URL_TABLE. HIDE URL_TABLE.
FORMAT HOTSPOT OFF.FORMAT INTENSIFIED OFF.
WRITE: 'to go to', URL_TABLE.
ENDLOOP.
CLEAR URL_TABLE.
AT LINE-SELECTION.
IF NOT URL_TABLE IS INITIAL.
CALL FUNCTION 'WS_EXECUTE'
       EXPORTING
            program = 'C:\Program Files\Internet Explorer\IEXPLORE.EXE'
            commandline     = URL_TABLE
            INFORM         = ''
          EXCEPTIONS
            PROG_NOT_FOUND = 1.
IF SY-SUBRC <> 0.
     WRITE:/ 'Cannot find program to open Internet'.
ENDIF.
ENDIF.
Regards,
Bhaskar

Call SXPG _ CALL _ SYSTEM from ABAP program

Hi,
Someone may help me? I need to call the function module SXPG _ CALL _ SYSTEM from ABAP program for to encrypt a file.
I created the command by SM49 , but I don't know how I can call it from ABAP program.
Thanks
Maria C

Hi Maria.
This is a possible code you can use:
DATA: log LIKE TABLE OF btcxpm WITH HEADER LINE.
Can contain STDOUT, STDERR
commandname =
CALL FUNCTION SXPG_CALL_SYSTEM
IMPORTING
COMMANDNAME = commandname
PARAMETERS = parameters
EXPORTING
STATUS = status
TABLES
EXEC_PROTOCOL = log
EXCEPTIONS
NO_PERMISSION = 1
COMMAND_NOT_FOUND = 2
PARAMETERS_TOO_LONG = 3
SECURITY_RISK = 4
WRONG_CHECK_CALL_INTERFACE = 5
PROGRAM_START_ERROR = 6
PROGRAM_TERMINATION_ERROR = 7
X_ERROR = 8
PARAMETER_EXPECTED = 9
TOO_MANY_PARAMETERS = 10
ILLEGAL_COMMAND = 11
OTHERS = 12.
The following are the comments of the parameters taken from:
http://help.sap.com/saphelp_40b/helpdata/en/fa/0971ee543b11d1898e0000e8322d00/content.htm
Parameters
IMPORTING Parameters
Parameter name
Use
COMMANDNAME
The name of the definition of the external command, as specified in the maintenance function (transaction SM69).
PARAMETERS
Arguments for the external command as specified by the definition in the R/3 System and by the calling program or user.
These arguments are checked for impermissible characters, such as the ; under UNIX. Problems are registered with the SECURITY_RISK exception.
EXPORTING Parameters
Parameter name
Use
STATUS
Returns the final status of the execution of the external command:
· Value O: The external command was started and ran to end successfully.
· Value E: An error occurred; the external command was not run successfully.
Tables Parameters
Parameter name
Use
EXEC_PROTOCOL
Contains the STDOUT and STDERR output of the external command and any output from the target host system.
Exceptions
Exception name
Meaning
X_ERROR
Reserved for future use.
NO_PERMISSION
The AUTHORITY-CHECK of the users authorization for the authorization object S_LOG_COM failed. The user is not authorized to carry out the command named with the specified arguments on the target system.
COMMAND_NOT_FOUND
Command name, as identified by COMMANDNAME and OPERATINGSYSTEM, has not been defined in the maintenance function (transaction SM69).
PARAMETERS_TOO_LONG
The combined argument string (ADDITIONAL_PARAMETERS and the DEFINED_PARAMETERS, as returned in ALL_PARAMETERS) exceeds the limit of 128 characters in length.
SECURITY_RISK
Either:
· The command contains impermissible characters. These are characters with potentially dangerous properties, such as ; under UNIX.
· The command definition specifies that an extra-check function module be run. This function module has rejected execution of the command.
WRONG_CHECK_CALL_
INTERFACE
The command definition specifies that an extra-check function module is to be run. Either this function module is missing, or the interface defined for this function module does not match that of the standard R/3 function module SXPG_DUMMY_COMMAND_CHECK. For more information, please see SXPG_DUMMY_COMMAND_CHECK: Interface for Extra-Check Function Modules.
TOO_MANY_PARAMETERS
The command definition specifies that user-specified arguments for the external command are not allowed. However, an additional string of command arguments was specified.
PARAMETER_EXPECTED
The command definition includes the placeholder character ?, which signifies that additional user-defined arguments are required. However, no additional arguments string was supplied.
PROGRAM_START_ERROR
An error occurred while starting the external command. The R/3 system field SY-MSGV1 contains additional information on the problem.
PROGRAM_TERMINATION_
ERROR
An error occurred while trying to obtain the return code of the external program. The R/3 system field SY-MSGV1 contains additional information on the problem.
ILLEGAL_COMMAND
The external command definition was modified "illegally". That is, the command was not modified by means of the maintenance function (transaction SM69).
The modified command is registered in the system log in its substituted form. The message is registered under the system log ID "LC".
OTHERS
Catch any new exceptions added to this function module.
Hope this will be useful.
Sandro Lombardo

Call workflow from ABAP program

created a zbusiness object (ZPRODH)with
one key field product hierarchy,
one attribute level number and
one method display.
I tested that zobject and using this object created workflow to display product hierarchy ,it is displaying it. now I have to call it from one abap program.
In the abap program I am calling the funcion module, I
CALL FUNCTION 'SWW_WI_START_SIMPLE'
EXPORTING
TASK = TASK
IMPORTING
WI_ID = WI_ID
TABLES
AGENTS = AGENTS
WI_CONTAINER = WI_CONTAINER.
It is calling the workflow and subrc is 0, but not passing the value to the workflow. Because of that the method is not working, any idea?
Thanks in advance

ttpa,
Please check this thread:
Re: Workflow from abap program
Also check that your Fm do requires any explicit commit or not?
Hope it will help u
Cheers
Jai

Call to Java web service from abap program

HI,
I want to call to Java WS from abap program and i read some post how to do that in release of NW 6.4 but I want to know what is the simplest way to do that in release 7.0 .
Many Thanks,
Nina

Hi Uwe,
Thank you.
I have WSDL or URL how i can call to them ,in the example that you send i don't find the place that it called.
Do i have to create proxy for that ?
BR
Nina

Procedure to Call Workflow Object from ABAP program in Se38

Hi All,
I have one scenario like i have to call one Workflow object from ABAP program in SE38.The scenario is like below.....
I have to select some records from database table.For example there are 100 records in the internal table.
For all that records i have to invoke Workflow for getting approval from the authorized persons. Once Approval has come to program, It will post one document in SAP and process ends.
Please suggest me how to move forward with this scenario.
Regards
Manas Ranjan Panda

Hi,
So you want to start a workflow from an ABAP, if an event exists for that particular workflow then the best way is to use fm SAP_WAPI_CREATE_EVENT,
to start a workflow from an ABAP you can use fm SAP_WAPI_START_WORKFLOW.
Kind regards, Rob Dielemans

To post a mail from ABAP program

dear friends
              how to post a mail to SAP inbox of a particular user from ABAP program.

get the spool no of the program
we have standard program rstxpdf4 through that convert it to pdf
and through f.m SO_NEW_DOCUMENT_ATT_SEND_API1 u can send mail.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
   EXPORTING
     DOCUMENT_DATA                    = x_document_data
     PUT_IN_OUTBOX                    = 'X'
     COMMIT_WORK                      = 'X'
   TABLES
     PACKING_LIST                     = it_packing_list
     CONTENTS_BIN                     = it_contents_bin
     CONTENTS_TXT                     = it_contents_txt
     RECEIVERS                        = it_receivers
EXCEPTIONS
    TOO_MANY_RECEIVERS               = 1
    DOCUMENT_NOT_SENT                = 2
    DOCUMENT_TYPE_NOT_EXIST          = 3
    OPERATION_NO_AUTHORIZATION       = 4
    PARAMETER_ERROR                  = 5
    X_ERROR                          = 6
    ENQUEUE_ERROR                    = 7
    OTHERS                           = 8 .
IF SY-SUBRC <> 0.
   retcode = sy-subrc.
   perform protocol_update.
else .

Sending an email to users from abap program

Hi experts ,
How to send an email to users from abap program ...
i need full coding please..so that i can copy and paste it in my program.
Thank you in advance.
Rajasekhar.P

Hi Venkat
check the below simple code to convert spool to HTML and email it
data: list type table of abaplist with header line.
data: htmllines type table of w3html with header line.
data: maildata   like sodocchgi1.
data: mailtxt    like solisti1 occurs 10 with header line.
data: mailrec    like somlrec90 occurs 0 with header line.
start-of-selection.
Produce a list
do 100 times.
    write:/ sy-index, at 30 sy-index, at 50 sy-index.
enddo.
Save the list
call function 'SAVE_LIST'
       tables
            listobject         = list
       exceptions
            list_index_invalid = 1
            others             = 2.
Convert the list
call function 'WWW_LIST_TO_HTML'
       tables
            html = htmllines.
Send mail
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test Subject'.
loop at htmllines.
    mailtxt = htmllines.
    append mailtxt.
endloop.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
       exporting
            document_data              = maildata
            document_type              = 'HTM'
            put_in_outbox              = 'X'
       tables
            object_header              = mailtxt
            object_content             = mailtxt
            receivers                  = mailrec
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.

Executing InfoPackage Group from ABAP Program

Similar Messages

Maybe you are looking for