Executing Personal cost plan run
Hi ECM Gurus,
We are to do budgeting through PCP, we have created our own data collection methods to load IT0666 and when we tried to Execute the Planning Run for the Period 01/01/2011 - 12/31/2011 we are expecting the same value to roll up to the org units as in IT0666. But for the New Hires after 01/01/2011 system is prorating the budget value from IT0666 whereas we have already stored prorated value for each employees in IT066.
Can any one please guide me on how to avoid the proration during Manage Cost Plan PHCPADMN.
Thanks.
All planning data that you generate in a defined period for a specific planning scenario based on a specific data basis.
A personnel cost plan allows you to define all information that is necessary for generating planning data such as planning scenario, planning period, and data source. By performing cost planning runs you fill the personnel cost plan with data.
Similar Messages
-
Personal Cost Planning (PCP)
I am looking for a highlevel timeline and task breakdown, for a PCP implementation.
Does anyone have it?
ThanksHi,
Any updates please
what is 'Personal Cost Planning and Simulation' and what is it use (what data can we analyse)
Thanks -
Personal Cost Planning in Compensation Management
Hi Experts,
Currently i am working in PCP In compensation Management, as i am new to this component i dont have a clear idea.
I need ur help to know the process flow regarding PCP and how to configure the system.
I have gone through the help documents but still i need ur help.
It would be helpful if u expalin me in detail.
Thanks & Regards,
Reena..........Thanks for the response Siddharth.
and i also want to know if payroll module is required for compensation management to be implemented.
Regards,
Dolly -
Personnel Cost Planning - Detail Planning
I would like to ask you if some user in R3 system can handle the detail planning functionality of personnel cost planning component for all the plans-scenarios for all existing organizational units;
how is it possible and through wich connection between the user and this role.
(For example this user must be able to add or to increase cost items to the total sum of the company)
thanks a lotHello Andreas,
Please review the note 736170 and make sure that the suggested support package is implemented in your system.
And also please check if your cost plan has the 'Detail Planning Possible' date filled in, because it should be maintained.
If Badi HRHCP00_RESP_OBJECTS activated, then did you try to regenerate the Badi definition for checking the
resposible objects? (Se18)
Is any other Badi activ instead of this one?
In IMG - Cost Plan Runs - Badi Specify Authorizations & Objects in Area of Responsibility if badi is activated, see if you get this error if you deactivate it.
Please check further the configuration for the BSP application. Is transaction PHCPDETLC called properly?
See also the note 592085.
Best Regards,
Shree -
SAP PCP (Personnel Cost Planning)
We are planning to implement PCP on SAP ECC 6.0. I am trying to achieve the basic scenario but it is not workign fine.
In first step i need to collect data like basic pay of employee , valuate cost item by 50 percent , and then run the cost plan. for example i colllected theh data through infotype basic pay , and when i run the cost planning run , i get the same value , how to valuate the basic bay. If data collected is $100 , and when i valuate it should be 150$ but this is not happening. Please advise what to do.
I had maintained base and dependent cost items, HCP01 and HCP02.
Thankign you all in advance.
BEst Regards,
Samad Farooqok
-
Personnel Cost Planning and Simulation - Detail Planning
Hi,
I am trying to access the PCP Detail Planning (t-code PHCPDETL) and for any of the Plan I choose it gives me the following error:
No Object exist in your area of responsibility
No data exists for the objects you are responsible for
We are on SAP ECC 6.0 EHP 4.
Many Thanks
Asim KhanHi Asim,
First of all check note 736170 and see if you have sugeested SP implemented in your system.
Also check if your cost plan has the 'Detail Planning Possible' date filled in.
Then check if Badi HRHCP00_RESP_OBJECTS is activated in your system. If it is, then make
sure you regenerate the Badi definition for checking the resposible objects in SE18. The problem
might be another Badi active here instead of the one I mentioned.
Also check IMG - Cost Plan Runs - Badi Specify Authorizations & Objects in Area
of Responsibility if badi is activated. Do a test - see if you get this error if you deactivate it.
Make sure configuration for the BSP application is OK and if PHCPDETLC is called properly?
Note 592085 can be also handy.
Kind regards,
Andrzej -
Recursion in planning run: product T-B104 location PL1000 to be planned twice
Dear experts,
Please advice regarding the following situation. I execute the Production Planning Run. After this, I check the log and I get the following error : "Recursion in planning run: product T-B104 location PL1000 to be planned twice". Based on previous posts regarding similar situations, I run the trx. /SAPAPO/SNPLLC to identify the existing cycles resulting in the recursion of the planning run. After this, in the log I have the following error: "no supply sources were found for the model 000".
Does anybody have a clue regarding the cause of this ?
Thank you,Hi,
This should be probably master data - please check if you have all the master data in APO. ( for eg PDS) -
KP06 - No transactions for cost planning are defined in the Nos range table
Dear CO Experts,
I m trying to post Cost Planning using T-Code KP06.
please help, the Error which pops is :
*No transactions for cost planning are defined in the number range table*
*Message no. K8007*
*Diagnosis*
*You want plan primary or secondary costs/revenues in controlling area 9000. This is not possible because no entries exist in the number range table for the cost planning transactions you want to perform.*
*This is an internal system error.*
*System Response*
*Processing is terminated.*
*Procedure*
*Start program RKTKA04C.*
*Execute*
*After the program has run successfully, start planning again.*HI,
the planning subobjetcs to be assigned in KANK to a CO-number range are (maybe you do not need all of them):
KAZP
KOAP
KPPB
KPPZ
KSP0
KSPB
KZPP
KZRP
PAPL
RKP1
RKP2
RKP3
RKP4
RKP5
RKP6
RKP7
RKP8
RKP9
RKPB
RKPL
RKPQ
RKPS
RKPU
RKPV
RKPW
RKPX
RKPZ
best regrads, Christian -
Hi,
I need your help.
I had executed detail planning (transaction PHCPDETL) and I selected a new job (for this job I did data collection with method IT1005. The system saved the data on infotype 5010, for period 01.01.2012 u2013 31.12.2012).
So, when I tried to release the cost plan, appears this message for the job selected u201CNo cost assignment available for period 01.01.2012 - 31.12.2012u201D.
I already checked the configuration on tables: V_T77HCP_CITM, V_T77HCP_CISA and transaction OBYE and all information are correct.
Can you help me, I really need some idea, because my client have this process pendent.
Thanks,
SandraHi,
Tick the check box 'Integrated Planning" in control tab in the project definition. Then run CJ9Q.
Trust this helps much!
Cheers! -
T.Code Personnel Cost Planning
What are the T.Code important for Personnel Cost Planning
Kind RegardsHi Sanew2,
PCP t-codes:
PHCPADCO Post Cost Planning Data to CO
PHCPADMN Manage Cost Planning Data
PHCPCLCO Display Original Document (Cluster)
PHCPCLPL Display Plan Data (Cluster)
PHCPDCDL Delete Infotype Data
PHCPDCEM Collect Cost Planning Data: Employee
PHCPDCOO Collect Cost Planning Data: OrgObj
PHCPDCPY Manage Data from Payroll
PHCPDCUI Maintain Data Basis
PHCPDETL Detailed planning
PHCPDETLC Detail Planning Cent.Pers.Respons.
PHCPISCO Display Original Documents
PHCPISCP Compare Personnel Cost Plans
PHCPISDT Display Plan Data Changes
PHCPISPL Display Plan Data
PHCPPRMV Delete Plan (All Information)
PHCPPRUN Execute Planning Run
PHCPRELS Release plan
PHCPSLG1 Application Log Pers. Cost Planning
Cheers,
Donnie -
Create the personnel cost plan in the organizational view
Respect to Hcm consultants,
what does "create the personnel cost plan in the organizational view" mean? I mean how do i create PCP in organizational view and i create them in controlling view. whats the difference between both of them and how to access both of them as well.
your feed back would be highly appreciated.
Regards
Waqas AnwarHi,
you have to run your object data selection for multi years as well. First do this for the person, tha n do it for the position, than for the job. Than you can delete the data from the position and automatically the data from the job is taken (in average) for the position for the period you select.
A thing that you have to keep in mind for multi period runs is that it creates thousands and thousand of records. Runtime is therefore long and extraction to BW is also hard to create due to this. If it is possible to cut it in to pieces, this is advisable.
regards,
Frans -
Planning run for make to order strategy
Hi,
I am trying to run the complete planning cycle for strategy group 20. But i am unable to do so. Can u please give me a detailed description on the same.
P.S. I did the planning run for strategy group 10, that is , making a plan and converting to active plan etc.
But unable to run for strategy group 20.
Please look into the same.
Br,
GeetuHi Geetu
Make to Order Means :
Produce/ Procure the material for this Sales Order (----
Strategy Means :
Effe. procedure/plan to execute Requ.
Advantages of Make to Order :
Reduce the Inventory
Reduce the Cost
Flexible to Customer Requirements
MAKE to ORDER STRATEGY 20
(Pure make to Order)
===============================================================================
u2022 Production & purchase are triggered by Sales order receipt
u2022 System will not perform net requirement calculation between individual sales orders
u2022 Produced quantities canu2019t be switched between one sales order to other
u2022 System creates individual planned orders against each sales order recd. With ref
u2022 Individual & collective requirement indicator controls the level up to which MTO is applicable
u2022 Goods Issue against the sales order reduces the requirement
u2022 System manages the production & procurement costs specifically for each sales order in settlement order
u2022 Lot for lot order qty, is the default lot size followed in MTO, irrespective of the settings in MRP1
==================================================================================
Create a material(MM01) with Strategy Group :20 ( MRP3)
You can check & confirm all those properties by creating a Sales Order (VA01)
See the effect of it after running the MRP ( MD02),
Check the Results in Stock Requirement List ( MD04)
Also, check the stock level of the same material before the Sales Order &
after the Sales Order
If possible, Create One more Sales Order &
see how the quantities of the individual sales Orders are managed.
You can verify all the prosperities of Make to Order (Strategy :20) by yourself
Hope this may Help
BRSR -
Error occurred during CTM planning run
Hi folks,
Appreciate your co-operations!
I am facing the problem while running the CTM with the profile DEMO2.
CTM Planning Run gives one error and alert.
Error: Error occurred during CTM planning run
Technical Data
Message type__________ A (Cancel)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 401
Problem class_________ 1 (very important)
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ A
Alert: Internal error has occurred (<!> Segmentation fault)
Technical Data
Message type__________ E (Error)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 571
Message variable 1____ <!> Segmentation fault
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ C
Log file display
<i> 04:37:59 optsvr_main.cpp(1363) 'SuperVisor' => Commandline : 4 respected parameters ...
Args:
m0001006
sapgw04
28812935
IDX=1
<i> 04:37:59 optsvr_main.cpp(645) 'SuperVisor' * SAP APO CTM Engine [CTM/ctmsvr]
<i> 04:37:59 optsvr_main.cpp(646) 'SuperVisor' * Copyright u00A9 SAP AG 1993-2009
<i> 04:37:59 optsvr_main.cpp(647) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(648) 'SuperVisor' * Version : 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
<i> 04:37:59 optsvr_main.cpp(649) 'SuperVisor' * Platform : ntamd64/x64
<i> 04:37:59 optsvr_main.cpp(650) 'SuperVisor' * Interface : 2.0
<i> 04:37:59 optsvr_main.cpp(651) 'SuperVisor' * Build date : Nov 25 2009 22:59:47 [1259186387]
<i> 04:37:59 optsvr_main.cpp(652) 'SuperVisor' * Build machine : PWDFM163
<i> 04:37:59 optsvr_main.cpp(653) 'SuperVisor' * Latest change : 407661
<i> 04:37:59 optsvr_main.cpp(654) 'SuperVisor' * NW release : 7100.0.3300.0
<i> 04:37:59 optsvr_main.cpp(655) 'SuperVisor' * Perforce branch: 7.0_REL
<i> 04:37:59 optsvr_main.cpp(656) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(676) 'SuperVisor' * Hostname : m0001006
<i> 04:37:59 optsvr_main.cpp(677) 'SuperVisor' * OS version : 5.2.3790 (WinServer2003, NTAMD64) SP2.0 (Service Pack 2), SERVER ENTERPRISE TERMINAL SINGLEUSERTS
<i> 04:37:59 optsvr_main.cpp(678) 'SuperVisor' * PID : 6768
<i> 04:37:59 optsvr_main.cpp(683) 'SuperVisor' * CWD : D:\usr\sap\SC6\DVEBMGS04\log
<i> 04:37:59 optsvr_main.cpp(684) 'SuperVisor' *
<i> 04:37:59 core_sysinfo.cpp(453) 'SuperVisor' * free disk space: 190433 MB
<i> 04:37:59 core_sysinfo.cpp(454) 'SuperVisor' *
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * Memory information:
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * physical memory: 10238 MB total, 6511 MB available [63% free]
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * page file : 73212 MB total, 60889 MB available [83% free]
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * virtual memory : 8388607 MB total, 8388499 MB available [99% free]
<i> 04:37:59 optsvr_main.cpp(693) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(783) 'SuperVisor' * running in invoke mode
<i> 04:37:59 optsvr_rfcconnection.cpp(871) 'MsgMgr' <RFC> RfcPing(RFC_HANDLE=1) received in thread#6912
<i> 04:37:59 optsvr_rfcconnection.cpp(692) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_SET' for sending of parameters/options
<i> 04:37:59 optsvr_rfcconnection.cpp(703) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_GET' for receiving of parameters/options
<i> 04:37:59 optsvr_rfcconnection.cpp(712) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PROGRESS' for progress informations
<i> 04:37:59 optsvr_rfcconnection.cpp(721) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_MESSAGE' for messages
<i> 04:37:59 optsvr_rfcconnection.cpp(730) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_RESULT' for (intermediate) result informations
<i> 04:37:59 optsvr_rfcconnection.cpp(739) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_SYSINFO' for system informations
<i> 04:37:59 optsvr_rfcconnection.cpp(748) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PERFINFO' for performance informations
<i> 04:37:59 optsvr_rfcconnection.cpp(1269) 'MsgMgr' <RFC> skipping empty profile value [GENERAL] sPROFILE_CUST_ID
<i> 04:37:59 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 7
number of received data: 10569
number of sent data : 1349
overall reading time : 9073
overall writing time : 162
<i> 04:37:59 optsvr_main.cpp(1110) 'SuperVisor' * Starting MainScript ...
<i> 04:37:59 optsvr_main.cpp(1445) 'SuperVisor'
***************************** OPTSVR - OPTIONS ***************************** *
[CTM_PROFILE]
nCTMENGINEPACKAGESIZE = 500
sCOMPONENT = SCM
sCTMLOGFILE = ctm.DEMO2.0000_0001.20091201043758.log
sCTMLOGFLAG = 0
sCTMPROFILE = DEMO2
sRELEASE = 700
[general]
bUNICODE = true
nSLOT_MAXIMUM = 1
nSLOT_MINIMUM = 1
nSLOT_RESERVED = 1
sAPO_RELEASE = 700
sAPPLICATION = CTM
sExeDir = d:\apoopt\ctm\bin
sExeName = ctmsvr.exe
sHOST = m0001006
sInvokeMode = invoke
sLANGU = E
sMANDT = 700
sPRODUCT_NAME = APO
sPRODUCT_PATCHLEVEL = 0001
sPRODUCT_RELEASE = 700
sPROFILE = DEMO2
sSESSION = tju5Bmz21}6WVG0Sn6pv3W
sSYSTEM = SC6
sUNAME = MBATCHA
[init]
sSECTION0001 = INIT
sSECTION0002 = GENERAL
sSECTION0003 = PASSPORT
sSECTION0004 = CTM_PROFILE
[PASSPORT]
bIS_REMOTE = false
nACTION_TYPE = 1
nSERVICE = 1
sACTION = /SAPAPO/CTMB
sPRE_SYSID = SC6
sSYSID = SC6
sTRANSID = 2205DEDE7A5BF16DA07D001CC46CF90E
sUSERID = MBATCHA
************************** OPTSVR OPTIONS - END **************************** *
<i> 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
<i> 04:37:59 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->download
<i> 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 806 to OutputInterface from [MG]
<i> 04:37:59 ctm_modelgen.cpp(166) 'CTMModelGenerator' ======================================================================
<i> 04:37:59 ctm_modelgen.cpp(167) 'CTMModelGenerator' MG::download
<i> 04:37:59 core_msgmgr.cpp(1110) 'MsgMgr' renaming tracefile
<i> 04:37:59 core_msgmgr.cpp(1111) 'MsgMgr' old name: optsvr_trace20091201_043759_1a70.log
<i> 04:37:59 core_msgmgr.cpp(1112) 'MsgMgr' new name: ctm.DEMO2.20091201_043759_1a70.log
logfile reopened : Tue Dec 01 04:37:59 2009
logfile name : ctm.DEMO2.20091201_043759_1a70.log
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PRDAT_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPAR_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_LOC_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PPM_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_TRANS_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_RES_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SSTCK_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_CAL_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPER_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_INCMD_RFC_READ
<i> 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_DEM_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SUP_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_UCMAP_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:04 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 810 to OutputInterface from [MG]
<i> 04:38:04 ctm_modelgen.cpp(735) 'CTMModelGenerator' MG::download done
<i> 04:38:04 ctm_modelgen.cpp(736) 'CTMModelGenerator' ======================================================================
<i> 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CTMModelGenerator' [6]->download = success [ctx size : 1]
<i> 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Solve' with 9.22337e+012 seconds left
<i> 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Match' with 9.22337e+012 seconds left
<i> 04:38:04 ctm_executionmanager.cpp(102) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(103) 'SuperVisor' statistics:
<i> 04:38:04 ctm_executionmanager.cpp(104) 'SuperVisor' number of demands: 7
<i> 04:38:04 ctm_executionmanager.cpp(105) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(107) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(108) 'SuperVisor' parameters:
<i> 04:38:04 ctm_executionmanager.cpp(118) 'SuperVisor' time continuous planning
<i> 04:38:04 ctm_executionmanager.cpp(125) 'SuperVisor' backward scheduling
<i> 04:38:04 ctm_executionmanager.cpp(184) 'SuperVisor' CBCLP enabled
<i> 04:38:04 ctm_executionmanager.cpp(457) 'SuperVisor' ======================================================================
<i> 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CtmEngine' [7]->run
<i> 04:38:04 ctm_executionmanager.cpp(523) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(524) 'SuperVisor' EM::execute for packet 1
<i> 04:38:04 ctm_executionmanager.cpp(1570) 'SuperVisor' EM::execute for packet 1 done
<i> 04:38:04 ctm_executionmanager.cpp(1571) 'SuperVisor' ======================================================================
<i> 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CtmEngine' [7]->run = success [ctx size : 1]
<i> 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->upload
<i> 04:38:04 ctm_modelgen.cpp(1097) 'CTMModelGenerator' ======================================================================
<i> 04:38:04 ctm_modelgen.cpp(1098) 'CTMModelGenerator' MG::upload of packet 1
<e> 04:38:05 ctmsvr_script.cpp(229) 'SuperVisor' <!> STRING EXCEPTION : <!> Segmentation fault
<i> 04:38:05 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:05 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_NTAMD64 = 45344
[CHECK_LOWERBOUND]
<i> 04:38:05 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
tracefile ctm.DEMO2.20091201_043759_1a70.log
<i> 04:38:05 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
ENGINE_VERSION 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
nCPU_TIME 0
nHD_FREESPACE 190433
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
<i> 04:38:05 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
<i> 04:38:05 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...
<i> 04:38:05 core_memmgr.cpp(564) 'MsgMgr' transferring memory of heap 6912 to main heap
<i> 04:38:05 core_memmgr.cpp(606) 'MsgMgr' finished transfer of heap 6912
<i> 04:38:05 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 116
number of received data: 420457
number of sent data : 39262
overall reading time : 5.30093e+006
overall writing time : 3831
<i> 04:38:05 optsvr_main.cpp(1332) 'MsgMgr'
OptimizeServer says GOOD BYE
Please help me to resolve this issue.
Thanks & Regards,
KhadarHi Khadar,
1) The information you have provided is the CTM optimiser log.
Run the job in background and in sm37 and click on job log &
analyse the exact error happened. In case if you are not able
to do, please provide the error log.
2) Check the livecache is stable in its operations when the job
runs (check with basis team)
3) Run consistency check for master data before CTM run
4) Check for any struck queues and clear those and rerun
5) If you feel more inconsistencies in system, run livecache
consistency and rerun CTM run
Regards
R. Senthil Mareeswaran. -
Best practice for implementing Manufacturing Cost Planning ( MCP)
is there any best practice for implementing Manufacturing Cost Planning ( MCP) using BI-IP?
Hi:
Both options are viable. If you reverse posting in FB50 then FI GL account postings will also be reversed and along with cost center postings. Hence here advantage is that cost center reversal will be with referenced to the original document with which wrong posting were made. Disadvantage here is that you will to post the entry again in FB50 . In KB11N you will simply transfer cost center amount from wrong to new one that should be in place of it but here you will have no reference . I personally think reversing posting through FB50 is viable options , reverse postings can be seen in KSB1 as well against that cost center.
Regards -
How to add "Cost Plan Version" and "Planned Cost" into CNE5 report?
Hi,
I would like to display Cost Plan Version(VERSN) and Planned Cost in the CNE5 report.
How to retrieve Planned Cost that based on the Cost Plan Version ?
Appreciate helps. Thanks.
Regards,
See MunPlan versions: A plan version is created in accounting and stores different cost plans for a project, such as an "optimistic" and a "pessimistic" plan.
Now coming to plan version 0 is verson where actaul cost is updated in your organisation.
Plan version 1 is used for the planning...
How to see the same in CJE5 is suggested by Virendra..
However there is no filed name planned cost in report but the name of the filed is Proj.cost sched.000
with which you can achieve your result.
path is run txn CJE5>give your Project no.> F8> in new screen> F5-->in new Window scroll down in the right side for the Proj.cost sched.000 filed > with select take the same to left side>Enter--> values will displyed for this field in your report.
similarly you can use the other fields as well... take help of F4, to know the meaning of fileds.
Regards
Nitin
Edited by: Nitin Patoliya on Jan 17, 2009 11:18 AM
Maybe you are looking for
-
We have an homegrown Access database originally designed in 2000 that now has an SQL back-end. The database has not yet been converted to a higher format such as Access 2007 since at least 2 users are still on Access 2003. It is fine if suggestions
-
Any advice would be greatly appreciated! The app I'm thinking of using cost $35 and is supposed to move everything from the device to my imac, but will each administrator acct be able to use it? Is there another way?
-
Problems selecting paper bin/source with some printers drivers
Hi, I'm using CR2008 SP2 .NET SDK. With some printers drivers i'm unable to set the correct paper source in the print options. For example, if I use Toshiba e-series PLC driver (you can find it here:drivers and select, for example, the e-STUDIO281C p
-
Mac PRO Desktop blank DVD will not eject keeps freezing. "LION"
Hi, my Mac pro will not eject the blank disc i inserted into the drive, I am running lion and it keeps trying to read the disc and makes everything freeze. you cannot reset or shut down the machine properly unless you hold down the power button. is t
-
How to insert into a table using a procedure in a trigger
I have following trigger and based on the some condition, it should inser a row in to a table using the procedure: CREATE OR REPLACE TRIGGER RSSC.RR_SERV_ADD_ON_REQ_bu before update on RSSC.RR_SERV_ADD_ON_REQ for each row DECLARE lr_appr_trans_hdr AP