Executing powershell script from remote computer using RSAT

Hi.
I want to execute powershell script on AD server from remote computer (in the same domain). I installed and tested RSAT - it is working fine. But i cant execute PS from c# code.
ps.Commands.AddCommand("Import-Module").AddArgument("ActiveDirectory");
ps.Invoke();
ps.Commands.AddCommand("Get-ADOrganizationalUnit -Filter 'Name -like \"*\"'");
var res = ps.Invoke();
And i get exception:
An unhandled exception of type 'System.Management.Automation.CommandNotFoundException' occurred in System.Management.Automation.dll
Additional information: The term 'Get-SBNamespace' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.

Hi
CapitanPlanet
For the
CommandNotFoundException, it means the command cannot be found.
On the other hand, your issue is about the PowerShell, if you still have the issue, I suggest that you should post it in the
PowerShell forum for efficient response.
Here are some useful information, please check
Powershell
commands from C# not working (System.Management.Automation.CommandNotFoundException)
Powershell, Service Bus For Windows Server Programmatically: Command found, module could not be loaded
https://msdn.microsoft.com/en-us/library/dn282152.aspx
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Execute powershell script from ssis?

Hi,
I was trying to use the execute process task to kick off a powershell script. However, nothing happens when I run in debug (the component turns yellow and stays yellow). Any idea if what I am trying to do is possible and the proper way to configure
it?
btw, I am using powershell for the remoting capabilites. I need to execute a bat file on a remote server which runs a process in a legacy program.
Update: When I name the ps1 script file in the executable window, it opens it in notepad. This would be like the default if you double clicked the file.
Mark

To run a PowerShell Script from SSIS package. Add a "Execute Process Task" in SSIS and use the following command text.
This works just great, plus the "-ExecutionPolicy ByPass" switch will take care of any server script policies.
C:\Windows\System32\WindowsPowerShell\v1.0\PowerShell.exe
-ExecutionPolicy ByPass -command ". 'L:\Powershell_Script\Script1.ps1' 'param1' 'param2'"
Regards
Deepak

Term is not recognized when executing PowerShell Script through SQL Agent using CMDEXEC

I am trying to simply execute a PowerShell script that is stored in a file on a network drive through SQL Agent as a job. The script is a basic copy from one directory to another. I have run and successfully executed this from a command prompt outside
of SQL Agent. When I execute this through SQL Agent as a Operating System (CmdExec) command I am getting an error that the term is not recognized as the name of a cmdleet, function, script file or operable program. I have executed many different ways
put found an article to use double quotes in the network path which I have done with no success.
I am executing the following command as a job in SQL Agent:
PowerShell H:\"\PowerShell""\PS_Scripts\"\batchcopyFFLWithProgress.ps1 through SQL Agent job
I get the following error message:
04/21/2015 10:01:09,Copy FFL Files,Error,1,NY11266-LTW7E\JPLAPTOPSQL,Copy FFL Files,Copy FFL files,,Executed as user: NT Service\SQLAgent$JPLAPTOPSQL. H:\PowerShell\PS_Scripts\batchcopyFFLWithProgress.ps1 : The term 'H:\PowerShell\PS_Scripts\batchcopyFFLWithProgress.ps1'
is not recognized as the name of a cmdlet<c/> function<c/> script file<c/> or operable program. Check the spelling of the name<c/> or if a path was included<c/> verify that the path is correct and try again.
At line:1 char:1 + H:"\PowerShell\PS_Scripts"\batchcopyFFLWithProgress.ps1 + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound:
(H:\PowerShell\P...ithProgress.p s1:String) []<c/> CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException. Process Exit Code 1. The step failed.,00:00:03,0,0,,,,0
Content of batchcopyFFLWithProgress.ps1 which has the PowerShell script:
$source=ls H:\SQLTest\Script\TestData\*.*
$i=1
$source| %{
[int]$percent = $i / $source.count * 100
Write-Progress -Activity "Copying ... ($percent %)" -status $_ -PercentComplete $percent -verbose
copy $_.fullName -Destination H:\test -Recurse
$i++
I have searched the internet and have not found any resolution to my error. If someone has experienced this error and found the resolution I would greatly appreciate your help.

I have change the service account for SQL Agent to be my domain account as I have local admin rights to my laptop. I stopped and started the services for SQL Agent and than started the job to run which is copying locally to minimize any network drive
issues. I am still getting the same error message as it is showing that I am executing the job under my domain account? Any thoughts what it could be?
ErrorMsg
04/23/2015 11:21:06,Copy FFL Files,Error,1,ServerName\InstanceName,Copy FFL Files,Copy FFL files,,Executed as user: Domain\DomainAccount. \\ServerName\Test\PS_Script\batchcopyFFLWithProgress.ps1 : The term '\\ServerName\Test\PS_Script\batchcopyFFLWithProgress.ps1'
is not recognized as the name of a cmdlet<c/> function<c/> script file<c/> or operable program. Check the spelling of the name<c/> or if a path was included<c/> verify that the path is correct and try again. At
line:1 char:1 + \\ServerName\Test\PS_Script\batchcopyFFLWithProgress.ps1 + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (\\ServerName...ithProgress.ps1:String)
[]<c/> CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException. Process Exit Code 1. The step failed.,00:00:02,0,0,,,,0
Script
$source=ls "\\ServerName\Test\TestData\*.*"
$i=1
$source| %{
[int]$percent = $i / $source.count * 100
Write-Progress -Activity "Copying ... ($percent %)" -status $_ -PercentComplete $percent -verbose
copy $_.fullName -Destination "\\ServerName\Test\test" -Recurse
$i++

Powershell Script, Control Remote Computer's Speaker Volume

how are you getting the function to the remote session?

I'd like to be able to control the volume of a remote computer's speakers and I'm having some trouble. I found a function that works perfectly, but it doesn't work remotely. This may just be a limitation of sendkeys.http://stackoverflow.com/questions/22083674/calling-a-function-within-a-function-with-invoke-command...So I've tried to use this in a couple ways. I've been able to send functions through before as a whole script block, but I'm having no success with this.This is the format that normally works for me
Invoke-Command -ScriptBlock ${Function:Set-Speaker} -Argumentlist $intVolume -ComputerName $strComputerI've also tried to do this through Enter-PSSession and dump the whole function in and run it, it doesn't work. I'm not getting any errors.When I run the same thing on a local session on that pc, it has no problems. Let me know...
This topic first appeared in the Spiceworks Community

Can we execute a Powershell script from the Javascript?

Hi,
I have a certain requirement to add a Custom ribbon button in document library and there was a powershell script to be run for the selected item in the library.
I have struck with executing a Powershell script from the javascript function.
Can anyone please suggest me if this was achievable
Thanks, Swaroop Vuppala

Hi Swaroop,
To execute server side code in a custom ribbon button script, using application page is a common way to do this, besides, you can also use a page dialog, which is similar with application page but display as model dialog, another way is javascript
_dopostback and delegate control, the following article contains detailed information about this, please refer to it for more information:
Invoke server side code on SharePoint ribbon click:
http://sharepointnadeem.blogspot.in/2012/07/invoke-server-side-code-on-sharepoint.html
Thanks,
Qiao Wei
TechNet Community Support

How to execute sql scripts from Powershell across multiple databases

Re: How to execute sql scripts from Powershell across multiple databases
I have an tsql script that I want to run across a list of databases. How is the best way to do this in Powershell? Thanks.

My example below, using just the SMO and not breaking up the batches, the ExecuteWithResults give the following error when the .sql file contains a GO. My script files are as simple as a DECLARE and then a GO.
WARNING: SQL Script Failed
The object of type "Microsoft.PowerShell.Commands.Internal.Format.FormatStartData" is not valid or not in the correct sequence. This is likely caused by a user-specified "format-list" comm
and which is conflicting with the default formatting.
+ CategoryInfo : InvalidData: (:) [out-lineoutput], InvalidOperationException
+ FullyQualifiedErrorId : ConsoleLineOutputOutOfSequencePacket,Microsoft.PowerShell.Commands.OutLineOutputCommand
Also, when executing from the ISE, is there a way to force the ISE to release the files. I am having to close the ISE and reopen my script every time I want to make a testing change to the .sql file.
[reflection.assembly]::LoadWithPartialName("Microsoft.SqlServer.Smo")
$scriptspath = "C:\temp\psExecuteSQLScripts\scripts"
$SQLServer = "fidevc10"
$SQLDB = "Bank03"
# Create SMO Server Object
$Server = New-Object ('Microsoft.SQLServer.Management.Smo.Server') $SQLServer
# Get SMO DB Object
$db = $Server.Databases[$SQLDB]
# Load All SQL Scripts in Directory
$scripts = Get-ChildItem -Path (Join-Path $scriptspath "*") -Include "*.sql" -Recurse
# Loop through each script and execute
foreach ($SQLScript in $scripts)
$fullpath = $SQLScript.FullName
# Read the Script File into Powershell Memory
$reader = New-Object System.IO.StreamReader($fullpath)
$script = $reader.ReadToEnd()
# Execute SQL
Write-Host "Executing $SQLScript on $SQLDB...."
try
$ds = $db.ExecuteWithResults($script)
Foreach ($t in $ds.Tables)
Foreach ($r in $t.Rows)
Foreach ($c in $t.Columns)
Write-Host $c.ColumnName "=" $r.Item($c)
Write-Host "Complete"
catch [Exception]
Write-Warning "SQL Script Failed"
echo $_.Exception|format-list -force
Write-Host " " -BackgroundColor DarkCyan

Execute a powershell script from a windows store apps

Hello Everybody !
I'd like to launch a powershell script from a windows store apps.
In fact the purpose is install a windows store apps from an other windows store apps.
Any ideas?
Thanks

If it's a sideloaded LOB application, you can do this using a brokered component:
http://blogs.msdn.com/b/wsdevsol/archive/2014/04/14/cheat-sheet-for-using-brokered-windows-runtime-components-for-side-loaded-windows-store-apps.aspx
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Remove domain account on remote computer using its local credentials

I want to make a script that will remove domain user account from remote computer. Right now I tested dosen of methods. I have stick to this:
([ADSI]"WinNT://$computerName/$localGroupName,group").Remove("WinNT://$domainName/$userName")
Thats absolutely working on local computer, but when I try to reach the remote computer I get 'Access Denied' error.
I do know the credentials for remote computer. I know how to created credential object. Now I am stuck with - how to force it use credential object with that kind of task?
Invoke is not an option.

This won't work in a Workgroup setting. It only works in a domain if you are a Domain Admin.
¯\_(ツ)_/¯

Execute powershell script in OIM task

Hi everyone,
I have a powershell script.
I want to execute this script on exchange machine.
How can I do this?
Can you send a code blok that executes powershell script if you have?
Thanks.
Best regards.

Hi FXE,
first of all, to protocol execution you can use the cmdlets Start-Transcript
and Stop-Transcript.
If it doesn't create a transcript at all, your error is with launching the console from task.
If it does create a transcript, you can (hopefully) see what the script wrote.
On general principle I'd recommend trying these things:
Try specifying the full path to powershell.exe
Make sure the user running the task has the necessary permissions
Make sure it's running as local admin (with maximum privileges)
Cheers,
Fred
There's no place like 127.0.0.1

Run PowerShell script from C# writing to input pipe

Hello,
I am trying to run a PowerShell script from C# (I have no control over what's in the script). The script may have a prompt like "Press enter to continue". So my goal is:
1. Get text output from the script (easy, many examples available)
3. If output contains "Press enter to continue", write a blank line to the running script's pipe to make it finish its job and quit
4. If output does contain that prompt, just let it exit by itself without sending any input
Note that commands in this PS script also try to get at script's file path, so I can't read script from file and pass it as text. It has to be executed as a script so it knows where it's located.
I have done this with .exes and batch files before. All you do in that case is process.StandardInput.WriteLine() which "types" enter into the input stream of script you are trying to control. But this does not work with Power Shell. How do I do this?
I have tried using PS object model like so:
using (Pipeline pipeline = runspace.CreatePipeline())
Command command = new Command(scriptPS, true, true);
   pipeline.Commands.Add(command);
   pipeline.Commands[0].MergeMyResults(PipelineResultTypes.Error, PipelineResultTypes.Output);
   pipeline.Input.Write("\n");
   Collection<PSObject> psresults = pipeline.Invoke();   //...
But I get an error because the script prompts:
"A command that prompts the user failed because the host program or the command type does not support user interaction. Try a host program that supports user interaction, such as the Windows PowerShell Console or Windows PowerShell ISE, and remove prompt-related
commands from command types that do not support user interaction, such as Windows PowerShell workflows."
I also tried using Process, and running PowerShell with -File switch to execute the script, then write to StandardInput with C#. I get no errors then, but the input is ignored and doesn't make it to PowerShell.
Please help!

No man, what kind of answer is that? You should have left it unanswered rather than waste people's time like this. I already seen those links before I posted my question. They address the issue of specifying script parameters, but not
writing to the input pipe.
Fortunately I did figure this out by writing a custom script host for PowerShell. Anyone interested can read about this in detail on MSDN (fortunately simple material with samples you can copy paste as I did, so this solution takes little time to implement).
Implement PSHost interface. Nothing special here, just paste directly from MSDN sample and modify their SetShouldExit function definition to contain just a "return;". Here's the relevant link:
http://msdn.microsoft.com/en-us/library/windows/desktop/ee706559(v=vs.85).aspx
Implement PSHostUserInterface interface. This is the ticket to solving this problem
(see below). Here's the MSDN link:
http://msdn.microsoft.com/en-us/library/windows/desktop/ee706584(v=vs.85).aspx
Implement PSHostRawUserInterface. This may not be required (not sure) but I did anyway. Nearly a direct paste from MSDN:
http://msdn.microsoft.com/en-us/library/windows/desktop/ee706601(v=vs.85).aspx
So, there are two PSHostUserInterface function implementations that are of particular interest. First is Prompt (read header comment to see why):
/// <summary>
/// When script attempts to get user input, we override it and give it input programmatically,
/// by looking up within promptInput's dictionary<string,string> or lineInput array.
/// PromptInput dictionary is mapped by input prompt (for example, return "" in response to "Press ENTER to continue")
/// LineInput is a regular array, and each time the script wants to prompt for input we return the next line in that array;
/// this works much like piping inputs from a regular text file in DOS command line.
/// </summary>
/// <param name="caption">The caption or title of the prompt.</param>
/// <param name="message">The text of the prompt.</param>
/// <param name="descriptions">A collection of FieldDescription objects that
/// describe each field of the prompt.</param>
/// <returns>Throws a NotImplementedException exception.</returns>
public override Dictionary<string, PSObject> Prompt(string caption, string message, System.Collections.ObjectModel.Collection<FieldDescription> descriptions)
Dictionary<string, PSObject> ret = new Dictionary<string, PSObject>();
foreach (FieldDescription desc in descriptions)
if (this.promptInput.Count != 0)
ret[desc.Name] = new PSObject(this.promptInput[desc.Name] + "\r\n");
else if (this.lineInput != null && this.currentLineInput >= 0 && this.currentLineInput < this.lineInput.Length)
ret[desc.Name] = new PSObject(this.lineInput[this.currentLineInput++] + "\r\n");
else
if (desc.DefaultValue == null)
ret[desc.Name] = new PSObject("\r\n");
else
ret[desc.Name] = new PSObject(desc.DefaultValue);
return ret;
Next is PromptForChoice. Here I opted to always return the default choice, but you could rewrite it to read from somewhere to "simulate" reading from input pipe just like the function above:
public override int PromptForChoice(string caption, string message, System.Collections.ObjectModel.Collection<ChoiceDescription> choices, int defaultChoice)
        return defaultChoice;
Last but not least, here's a ReadLine implementation (again read header comment):
/// <summary>
/// If the LineInput is set, "read" the next line from line input string array, incrementing line pointer/// </summary>
/// <returns>The characters that are entered by the user.</returns>
public override string ReadLine()
if (this.lineInput != null && this.currentLineInput >= 0 && this.currentLineInput < this.lineInput.Length)
return this.lineInput[this.currentLineInput++];
else
return Console.ReadLine();
Both are exposed as properties:
/// <summary>
/// Gets or sets the input pipe override
/// </summary>
public string Input
get
return string.Join("\n", this.lineInput);
set
if (value != null)
this.lineInput = value.Split('\n');
this.currentLineInput = 0;
else
this.lineInput = null;
/// <summary>
/// Gets or sets input pipe override for named prompts
/// </summary>
public Dictionary<string, string> PromptInput
get
return this.promptInput;
set
this.promptInput = value;
And finally, here's how the whole shebang is used:
/// <summary>
/// Runs a powershell script, with input pipe arguments
/// </summary>
/// <param name="script">Path of the script to execute, or script text</param>
/// <param name="inline">Whether or not to execute script text directly, or execute script from path</param>
/// <param name="unrestricted">Whether or not to set unrestricted execution policy</param>
/// <param name="parameters">Parameters to pass to the script command line</param>
/// <param name="inputOverride">Input to pass into the script's input pipe</param>
/// <param name="inputOverrideName">Input to pass into the script's input pipe, to each prompt by label</param>
/// <returns>Output lines</returns>
public static string PowerShell(string script, bool inline, bool unrestricted = false, Dictionary<string, string> parameters = null, string inputOverride = null, Dictionary<string, string> inputOverrideByName = null)
string output = null;
ScriptHost host = new ScriptHost();
(host.UI as ScriptHostUserInterface).Input = inputOverride;
(host.UI as ScriptHostUserInterface).PromptInput = inputOverrideByName;
using (Runspace runspace = RunspaceFactory.CreateRunspace(host))
runspace.Open();
if (unrestricted)
RunspaceInvoke runSpaceInvoker = new RunspaceInvoke(runspace);
runSpaceInvoker.Invoke("Set-ExecutionPolicy Unrestricted");
using (Pipeline pipeline = runspace.CreatePipeline())
if (inline)
pipeline.Commands.AddScript(script);
else
Command command = new Command(script, true, true);
foreach (KeyValuePair<string, string> param in parameters)
command.Parameters.Add(param.Key, param.Value);
pipeline.Commands.Add(command);
pipeline.Commands.Add("Out-String");
pipeline.Commands[0].MergeMyResults(PipelineResultTypes.Error, PipelineResultTypes.Output);
Collection<PSObject> psresults = pipeline.Invoke();
var sb = new StringBuilder();
foreach (PSObject obj in psresults)
sb.AppendLine(obj.ToString());
output = sb.ToString();
pipeline.Dispose();
runspace.Close();
return (host.UI as ScriptHostUserInterface).Output + "\r\n" + output;
As you can see, I also did some magic with the .Output property. That just accumulates lines of text output by the script in every WriteXXX function implemented in your custom PSHostUserInterface. The end result of all this, is that if you have a script
that has prompts, choices or reads from standard input, you can execute the script within the context of your custom script host written as above, to control precisely what strings are passed to it in response to prompts.

Executing powershell scripts via Task Scheduler

Hi,
I have a powershell script that I wrote that when executed from the shell works fine but when executed from task scheduler does not work.
In my script, an email is sent out based on the results of the execution. When I run this from the shell, email goes out, when scheduled, no email and there is no indication of errors having occurred anywhere in the system.
Has anyone run into a similar issue?
I did change my powershell execution policy to be unrestricted (both in the x86 and x64 consoles). I am running Windows 2008 R2.
Thanks - Greg.

Hi,
In addition the above suggestions, please also refer to the below threads:
Using Task Scheduler for a powershell script on server 2008
http://social.technet.microsoft.com/Forums/en-US/ITCG/thread/e298d613-47b8-4492-92d1-0b55cc8497c1
Using Windows Task Scheduler to execute Powershell Script frequently
http://social.technet.microsoft.com/Forums/en-US/winserverpowershell/thread/5901a6ad-ba18-4817-82a9-f75d2d6b439f
Hope this helps.
Best Regards,
Yan Li
Yan Li
TechNet Community Support

Execute perl script from CPO

Hi everyone,
Is it possible to execute a perl script directly from CPO without using a cgi or soap action, If yes, is there any documentation or model workflows that I can refer to...

Its a prewritten script hosted in a linux box(svc cat server), first we tried to invoke it as a soap request...
<?xml version="1.0" encoding="UTF-8"?>
http://schemas.xmlsoap.org/soap/encoding/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
">
#username#
this worked but we want to discontinue this approach,
so we tried to host the script as cgi and invoke the cgi directly...
but this is not working, so wanted to see if we can execute the script from CPO either directly by using CLI or by hosting the script in a server

How execute Unix script from java?

Can I execute Unix script from java?

Yes. Using ProcessBuilder. And read [When Runtime.exec() wont|http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html]. It's old, but pretty much all of it is still true.

Is it possible to execute SAPGUI scripts from java program?

Hi everyone..
     I need to develop an java applications that executes the SAPGUI script or any technique that execute set of transaction as client.
     Is it possible to execute SAPGUI scripts from java program? if so, how it can be achieved? is there any other technique to achieve above mention scenario?.
     it will be more helpful, if docs related to that are shared..
     Thanks in advance

Oh, bummer. Would be much more convenient if I could just use iTunes for everything. Can't stand WMP. I wonder if WinAmp might be a good compromise?
Thanks for this answer . . .
Sharon

Can I manage my parents MB from my computer using ARD. Even though they are on different networks

Can I manage my parents MB from my computer using ARD. Even though they are on different networks?>

When you say a diffrent network, do you mean accessing the computer over the internet?
VNC is built into the computer, so you don't need ARD to remote into a computer. To access your parents computer over the internet will most likely require configuring their router/firewall. And unless they're paying for a static ip, you'll also need some way to track their computer.
OR
you can use logmein, or teamviewer. Both programs are desgined to access a computer over the internet. Most of the time they don't require re-configuring the firewall.

Executing powershell script from remote computer using RSAT

Similar Messages

Maybe you are looking for