Executing Proxy in Background Mode

Hi All
Is it possible to execute the proxy in background mode ??
This is for a File->XI->ABAP Proxy interface..the message size is more than 30MB and is getting timed out in the inbound queue of the receiver (abap prxy)after 10mins.
This is bcoz the max runtime for the dialog work process is set to 600secs and we are unable to increase it further.
can anyone help.
Thx in advance
chemmanz

Hi Chemmanz,
You can increase the capacity of processing the message in Admin options.
Go to SXMB_ADM, run Integration Engine Configuration
Change specific configuration and then set the size of the message to be processed against the parameter
MAX_MESSAGE_TRANSFER_SIZE.
Hope this should solve your problem.
Regards,
Suraj Kumar.

Similar Messages

Server proxy in background mode using abap?

Hi,
I would like to schedule server proxy in back ground mode using ABAP report. I already have the payload available in XSTRING(binary) saved in Z table. I know how to convert binary string to XML (using FMs - SCMS_BINARY_TO_STRING).
However, is there any way to pass binaryXML(XSTRING) to server proxy (without converting the paylolad to XML and use SAX/DOM parser to populate proxy input structure ) ?
Not sure, if SET_XML(IF_WS_PAYLOAD) method can be used.
Thank you,
Mallik

Hi Malik,
I would like to schedule server proxy in back ground mode using ABAP report. I already have the payload available in XSTRING(binary) saved in Z table. I know how to convert binary string to XML (using FMs - SCMS_BINARY_TO_STRING).
If you think about this, it hasnt sense, a server always need to be alive wainting a communication. If you want to stop the server reception, the middleware system (in this case PI) would need to store the messages for a future server availability, then this would work only with async messages. I dont see right now the utility of this, may be don't overload the ECC system in a work hours, is this the problem?
However, is there any way to pass binaryXML(XSTRING) to server proxy (without converting the paylolad to XML and use SAX/DOM parser to populate proxy input structure ) ?
Are you talking about to do this conversion in a java mapping inside the PI? aren't you?
Regards.

Run smartforms in background mode

Hi
Can anybody tell me, can we execute smartforms in background mode. Please tell me. Can we take printout from the spool.
Smartform have driver program.
Thanks
Murali Papana.

hi,
Use
You can not only evaluate queries online, but also print them in the background. In the Reporting Agent of the Administrator Workbench, you can define the display of the query data as the setting for background printing. You can make as many various settings as you want for printing a query in the background. The settings are then brought together in scheduling packets and scheduled for background printing.
Prerequisites
You have defined a query in the Business Explorer Analyzer that you now want to print in the background. You have called up the Administrator Workbench to do this.
You can only print out queries with key figures in structures. If you have defined a query with a key figure in the filter and want to print this query, you must change the definition of the query so that the key figure is in a structure to be printed.
You can only schedule queries with entered variables for background printing if the required variable entry/entries have been saved as query variants.
Procedure
Defining Reporting Agent Settings for Printing in the Background
Choose the Reporting Agent from the Administrator Workbench.
Navigate in the left-hand tree to the query you want, and, using the right mouse button, choose New Setting. You get to the "New Reporting Agent Setting" dialog box.
Enter a technical name and a description.
Choose Print in the background from the General tabstrip.
Choose the tabstrip Print Settings from the newly added tabstrips.
Determine the print settings that you want to make. See also: Print Settings
Choose the Print Layout tabstrip.
Decide how you want to set the following print areas:
Cover sheet
Page header
Table header
Table
Page footer
Last page
See also:
Defining the Print Layout
Choose Activate.
Creating Scheduling Packets and Assigning Reporting Agent Settings for Printing in the Background
Once you have made the Reporting Agent setting for printing in the background, you have to assign your setting to a scheduling packet for the background run.
Creating a scheduling packet
Go back to the Reporting Agent Scheduler, and, in the right-hand Scheduling packets tree, choose the Change pushbutton.
Select the Print in the background node, and choose Create new packet from the context menu (right mouse button). You get to the Create Scheduling Packet dialog box.
Specify a name and a description, and choose Save.
Assigning Reporting Agent Settings for Printing in the Background
Navigate in the left-hand tree, Reporting Agent Settings, to the Reporting Agent setting you want to use for printing in the background.
Using drag-and-drop, drag the Reporting Agent setting that you want to use into the right-hand tree, and assign it to the corresponding scheduling packet.
If the Reporting Agent setting refers to a query with variables, then you need to assign a variant:
Select the Reporting Agent setting.
Using the right mouse button, choose Assign variants from the context menu. A dialog box containing the variants for this query appears.
Choose the variant you want to use.
Choose Continue.
You have the option of maintaining variants in the Reporting Agent (in both the left and right-hand trees).
Select the Reporting Agent setting you want to use.
Choose Maintain variants from the context menu (right mouse button).
Note that you always assign Reporting Agent settings for printing in the background to a corresponding scheduling packet for printing in the background.
To avoid confusion with Reporting Agent settings for exception reporting, you are able to filter according to these two functions in the left-hand menu. The symbols for Exception and Print, in the left-hand tree, also identify the settings.
Scheduling a Packet as a Job
In the right-hand tree, select the scheduling packet you want to use.
Using the right mouse-button, choose Schedule from the context menu. You get to the Change Job RA (name of the scheduling packet) dialog box.
The name of the job is made up of RA for Reporting Agent, and the name of the scheduling packet.
Specify the start date and the repetition period for the job.
See also:
Scheduling Background Jobs in the documentation for the BC Computing Center Management System.
If you want to check the status of the scheduled background job, choose the Jobs pushbutton above the right-hand tree in the Reporting Agent Scheduler.
Hope this helps, Do reward.

CRM IC Inbox - Excel Download in background mode

Hi Gurus
I have requirement,
In the result list of the Inbox , we have an icon - Excel which downloads the results to excel sheet. Now we will have execute this in background mode and send a mail once the job is completed.
Could me please let me know how to proceed.
Thanks
Rakesh

You be able to use the function "WS_DONLOAD" ?
parameters: p_fnam like rlgrap-filename memory id fnam obligatory.
data: begin of t_registro occurs 0,
        registro(1000),
      end of t_registro.
      describe table t_registro lines sy-tfill.
      if sy-tfill gt 0.
        l_tam = strlen( p_fnam ).
        call function 'WS_DOWNLOAD'
             exporting
                  filename                = p_fnam
             tables
                  data_tab                = t_registro
             exceptions
                  file_open_error
                  file_write_error
                  invalid_filesize
                  invalid_type
                  no_batch
                  unknown_error
                  invalid_table_width
                  gui_refuse_filetransfer
                  customer_error.
        if sy-subrc <> 0.
          open dataset p_fnam for output in text mode.
          if sy-subrc = 0.
            loop at t_registro.
              transfer t_registro to p_fnam.
            endloop.
            close dataset p_fnam.
            write:/ 'Se genero el archivo:', p_fnam(l_tam).
          else.
            write:/ 'No se pudo generar el archivo:', p_fnam(l_tam).
          endif.
          close dataset p_fnam.
        else.
          write:/ 'Se genero el archivo:', p_fnam(l_tam).
        endif.
   endif.
I hope this works for you.
See ya.
Ar@

Execute one thread in background mode.

hello ,
I have an application where the user can shows dialogs to displays, adds, modify and delete rows of one tale inside some JTextFields.
I have a problem to use this application, when one same dialog is showed more then one time....
Exactly: not problems come the first time the dialog is showed, but the second time, the time to wait because the performance is executed is very long..., and further, ....when the dialog at last was is shoved, no data of the table are in the JTextFields.
I get errors too when at last the dialog was shoved, and the errors not aways said the same reason..., but all the errors are referred to the impossibility (in the performances that followed the first) to have a suitable resultset containing the data.
Some error are "null pointer exception" to read the resultSet, other error is "Impossibils get a block in the required time" ...
I read documentation and I understand that the fault, probably, could came from the Event Dispach Thread that had the task to manage the creation of the ResultSet.
Now I am trying to solve (at this moment without success) the problem in this direction, ...as well I have not experience about to manage the use of SwingWorker class.
I should like hear what it is wrong in that I am doing...
Initially my code was this
     * Create a resultSet, for the current table
    private void createResultSet() {
            statement = dbconn.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
            currentResultSet = statement.executeQuery("Select * from " + tableName);
            boolean validateState = currentResultSet.last();
            regsNmbrOnTheTable = currentResultSet.getRow();
            System.out.println("Numero attuale di records = " + regsNmbrOnTheTable);
            // here come the exception:
            // Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
        } catch (SQLException ex) {
            reportErrors.checkingSyntaxInInputTags("metodo createResultSet(): Errore nel creare il resultSet");
//            Logger.getLogger(Main.class.getName()).log(Level.SEVERE, null, ex);
    } // createResultSetrecently I modified it in order to put the creation of the ResultSet in background....
     * Create a resultSet, for the current table
    private void createResultSet() {
        (acquiresResultSetInBackground = new AcquiresResultSetInBackground()).execute();
        currentResultSet = acquiresResultSetInBackground.doInBackground();
    } // createResultSet
// inner class to manage the performance in background mode.
class AcquiresResultSetInBackground extends SwingWorker <ResultSet, Void> {
        ResultSet resultSet;
        @Override
        protected ResultSet doInBackground() {
        try {
            statement = dbconn.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
              resultSet = statement.executeQuery("Select * from " + tableName);
        } catch (SQLException ex) {
            reportErrors.checkingSyntaxInInputTags("metodo createResultSet(): Errore nel creare il resultSet");
        return resultSet;
}How I said I get again the same behavior that was before......
thank you
Regards
tonyMrsangelo

For custom transactions you shouldn't have a problem - unless you're trying to do something that needs dialog with the presentation server.
Set an infinite loop in the custom transaction, launch your program in backround, then from Sm50, go to debug and find out what's going on.
DATA: debug.
WHILE debug IS INITIAL. " Debug from SM50 will get you here, change field DEBUG in the
ENDWHILE.               " debugger to contain 'X', and the loop will end.
Also, if your custom tx calls any standard SAP programs/FM, there is a chance that those programs work differently in background than foreground.

How to restrict user at selection screen while executing in background mode

hi all,
how to restrict user at selection screen while executing in background mode
Regards
Deepak

Hi,
We can get the Program whether this is running in background or not then we need to use SY-BATCH, if the SY-BATCH is set to X then the program is running in Background,
so in the INITIALIZATION event, you can use this SY-BATCH and check the User names, and give the error messsage which you want to restrict
Regards
Sudheer

FM not executing in background mode sometimes

Hi,
I'm using one Z function module for Production order confirmations which inturn calls 'BAPI_PRODORD_COMPLETE_TECH'.
There is 'BAPI_TRANSACTION_COMMIT' and 'BAPI_TRANSACTION_ROLLBACK' also present.
My issue is, this functionality works perfectly fine when I execute the program in foreground mode, but does not go through sometimes when I schedule it in background.
Note : Its not completely skiping the entries in background mode. It works sometimes and sometimes doesn't.
Can anyone comment if they have faced similar issues ?
Regards,
Shiva

Hi !
In my opinion it fails, when there is a popup coming from the BAPI.
We have the issue that when we process in background the orders where a popup should be shown (e.g. the popup asking if setting TECO is OK although reprocessing records exist).
When we reprocess our IDOC (which are calling that BAPI) in BD87, the popup is even shown in BD87 !
Any idea how to tell the BAPI to ignore such messages and still set the TECO ?
Any other way to set the TECO ?
thx a lot !

Suppressed some coloum while executing in Background mode

Hi All
As I am trying to execute report in foreground mode I am getting ALV output properly with all coloum while I am executing the same report in background mode I am getting same output with some of the coloum is not coming properly.
Please guide me to resolve the above issue.
Thanks
KRISH

Hi All
I am executing the custom report in foreground mode ALV output showing all columns for that same report I am executing in background mode some of the ALV output columns are missed out
For example:
Standard report output showing 10 columns, but I am executing the same report in background some of the columns are suppressed only I am able to view 5 columns remaining I am not able to view.
Please help me to resolve the above issue.
Thanks
KRISH

Not able to execute custom transaction in Background mode

Dear All,
There is a custom modele pool program to update the data in info type 9003. We have written a Z program in that we are calling this custom modele pool through CALL TRANSACTION with mode 'N' and update 'S'.
Z Program is running successfully and updating data in 9003 info type when we run in foreground mode.
But it is not updating when runs in Background mode.
Am I need to take any other precautions when run in background mode for custom transaction?
We are using 4.6C version.
Thanks in advance.
Regards,
Abaper

For custom transactions you shouldn't have a problem - unless you're trying to do something that needs dialog with the presentation server.
Set an infinite loop in the custom transaction, launch your program in backround, then from Sm50, go to debug and find out what's going on.
DATA: debug.
WHILE debug IS INITIAL. " Debug from SM50 will get you here, change field DEBUG in the
ENDWHILE. " debugger to contain 'X', and the loop will end.
Also, if your custom tx calls any standard SAP programs/FM, there is a chance that those programs work differently in background than foreground.

XLS from Application server in background mode to internal table

Hi,
I need to transfer the content of an excel file in the application server to an internal table while running my program in background. My file is xls, cant use csv. For dataset bin mode, I need to know how to transfer the data to my internal table, already searched on forum but didnt find answer, at least not for background..
ow, I am using v6 here
about the ALSM_EXCEL_TO_INTERNAL_TABLE, I get the upload_ole error all the time, and with TEXT_CONVERT_XLS_TO_SAP, conversion_failed all the time too...
here is the code, just the load part and data declaration:
REPORT zbeto.
TYPE-POOLS: truxs.
TYPES:
BEGIN OF y_cot,
text1(12) TYPE c,
text2(12) TYPE c,
text3(12) TYPE c,
text4(12) TYPE c,
text5(12) TYPE c,
END OF y_cot.
DATA: it_datatab TYPE STANDARD TABLE OF y_cot,
wa_datatab TYPE y_cot,
it_raw TYPE truxs_t_text_data.
DATA:
v_file TYPE rlgrap-filename,
begin_col TYPE i VALUE '1',
begin_row TYPE i VALUE '2',
end_col TYPE i VALUE '5',
end_row TYPE i VALUE '102',
t_ctmp TYPE y_cot OCCURS 0 WITH HEADER LINE,
t_xls TYPE alsmex_tabline OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
PERFORM f_load_xls.
FORM : f_load_xls
FORM f_load_xls.
v_file = '
ZSAPDEV\SAPDEVINTERF$\COTACAO\TESTE.XLS'.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = v_file
i_begin_col = begin_col
i_begin_row = begin_row
i_end_col = end_col
i_end_row = end_row
TABLES
intern = t_xls
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw " WORK TABLE
i_filename = v_file
TABLES
i_tab_converted_data = it_datatab[] "ACTUAL DATA
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
t_ctmp[] = it_datatab[].
ENDFORM. "f_load_xls
both FM arent working, and when I try to execute in background mode, before anything, I recieve the following error:
Message text:
Error during import of clipboard contents
Message class:
ALSMEX
Message no.:
037
Message type:
A
and without the ASLM FM, the TEXT_CONVERT give me the conversion_failed exception...
the directories are right, that I am sure, because I just copy&paste it from CG3Z/CG3Y when I uploaded and downloaded to
check the file in the server...
am I missing something?
thanks again,
Roberto Macedo
(PS: I made another topic because none replied the other in 4 days and wasnt solved yet)

Hi!
You didn't find answer for this, because it is not possible. If you run your program in background, it is running on the server, and does not have any connection to your local machine. That's why you can't upload/download in background mode.
You might try to address somehow your local PC, with its IP or MAC address, but I don't think does this task worth so much time.
Run your program in online mode, or if you want to run it in background, then upload your file into the SAP server.
Regards
Tamá

BDC Program is not working in background mode

Hi All,
I hv one bdc program for tcode fb02 which is working fine in foreground mode and data is updated to each screen properly. While running the same program in Background mode data is not updated. Can u seggust the solution.
Regards,
Rahul S

Hi ,
Remove the break point in the BDC performs.
put the break point once u complete the BDC.... otherwise execute the BDC in MODE 'E'.. error mode.
regards,
Rama Reddy
Edited by: ram reddy on Nov 16, 2009 5:37 AM

BDC is not working in background mode and working fine in Foreground mode

Hi Experts,
I have created a BDC in SHDB for the transaction code:CWBQM for creating and deleting the record and converted the BDC recording into the program using call transaction. It is working fine in both foreground and background. When I given the same program for users testing one for the user was able to delete the records but Creation is not working in the same BDC. He is able to create the same records in another PC and the problem is only in that PC and only during the creation of the record. When I change the mode to 'A' mode for testing and request the user to execute and it is working fine the records created successfully. What could be the issue ?
Thanks,
Hema

Hello,
While recording BDC in SHDB try setting "Simulate background mode" flag and give a try.
Cheers,
Nag

Front-end functions cannot be executed in the background in SM37

Hi ,
I have developed a BDC program for Tcode HRUSER . The program is working fine in Frontend but when Executed in Background through SM37 gives a error -:
"Front-end functions cannot be executed in the background".
I am not using any function like GUI_DOWNLOAD or anything like that .
Thanks
Nikhil Arya.

Hi ,
No , the program is not taking any inputs from the user .
when i am executing the program in background mode it is just showing the messages at the end which i am writing in the program for eg:
"creating a user for employee 2306328".
So , only the list of messages comes at the end .
Thanks
Nikhil Arya.

Can we schedule BDC in Background Mode - SM37

Hi Guru,
Can we schedule our BDC in background - SM37 . Upload file will be on Local Sustem - C drive.
Regards
Durgesh
Moderator message: background/GUI problems = FAQ, please search before posting.
locked by: Thomas Zloch on Oct 6, 2010 2:14 PM

GUI functions (like GUI_UPLOAD) will not work in background, they need an actual Gui active.
There are plenty of threads on this subject, search also in the wiki for threads/guide like [Working with files |http://wiki.sdn.sap.com/wiki/display/ABAP/Workingwithfiles] or [Communication to Presentation Server in Background Mode|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/9831750a-0801-0010-1d9e-f8c64efb2bd2&overridelayout=true] or [Working with FTP Server |http://wiki.sdn.sap.com/wiki/display/ABAP/WorkingwithFTP+Server]
(To execute a BDC in background use report RSBDCSUB.)
Regards,
Raymond

Calling a function from a DLL, exectution in background mode.

Dear Experts,
We have created an ABAP report the calls a function from a DLL file. If the report is executed in on-line mode the program calls and executes the function from the DLL, but if the ABAP programa is executed in background mode it doesnt calls the DLL function.
Do you know a way to solve the problem when executing in background mode?
Best regards.
Antonio

Hi Gabriel,
Let me explain in details about my DLL function.
We are importing the business partners from legacy system into the SAP CRM system, so at the moment we created the BP master data via BAPI, I get the name of the BP and this moment I call the function in the DLL file. I export the parameter name and I receive back a simplified string with the name reduced to a code. This code I get back from the dll it is insert in a Z table, so there is no interaction in the screen, all must be executed in background mode, because there are a lot of business partners to be converted in SAP system.
I am sending my code for your considerations.
Instancia a DLL
CREATE OBJECT dll 'MTCODE.CPFONET'.
IF sy-subrc NE 0.
    RAISE without_dll.
ENDIF.
Move para a tabela interna IT_NAME os valores recebidos na TI_NAME
it_name[] = ti_name[].
Para cada registro importado
LOOP AT it_name.
    CLEAR v_string_ret.
    wa_matchcode-zregid     = it_name-zregid.
    wa_matchcode-name1_text = it_name-name1_text.
    v_string = it_name-name1_text.
    CONDENSE v_string.
    TRANSLATE v_string TO UPPER CASE.
    CALL METHOD OF dll 'SetNome' EXPORTING #1 = v_string.
    CALL METHOD OF dll 'ExecMatch'.
    CALL METHOD OF DLL 'GetMCData' = v_string_ret.
    FREE OBJECT dll.
Preenche os campos do match-code de acordo com o retorno da DLL
    SPLIT v_string_ret
    AT '|'
    INTO wa_matchcode-zparmcln
         wa_matchcode-zparmcfn
         v_empty
         wa_matchcode-name_first
         wa_matchcode-name_last
         wa_matchcode-namemiddle.
Adiciona o registro com o match-code correspondente na TE_MATCHCODE
    APPEND wa_matchcode TO te_matchcode.
ENDLOOP.

Executing Proxy in Background Mode

Similar Messages

Maybe you are looking for