Executing query error: System error in program SAPLRRI2 and form REP_A

Hello Experts,
I am facing problem while executing query.
I have activated a query from BI content. The query is activated successfully in development and running successfully in development, so I transported the same into QA.
When I execute this query into quality, automatically debuger opens. After I come out of debuger I get following error message:
" >> Row: 82 Inc: LRRMSU13 Prog: SAPLRRMS
System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text)
Error when generating dataProvider "
This query is using some standard structures, which are running successfully in other queries in QA.
what would be an issue?
Regards,
Nirav Shah

Hi,
  Try to regenerate the query in RSRT t.code.
   ie) RSRT - give the query name - Generate report ( icon will be there near to Execute + debug) .
After generating the report, (logoff and login )try to execute the query again ..if the above solution doesn't work, check the below OSS notes which may help for you.
OSS notes : 1. 1121766
                   2. 1117966
                   3. 1225856
Regards,
Siva.

Similar Messages

  • System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01

    Hi All,
    I'm configuring the integration between BW 7 SP 11 and Portal 7 SP11. I have problems in the IP functions.
    The following error ocurrs in QueryDesigner when trying to execute a Query that is on an <b>Agregation Level</b> :
    <i>The initial exception that caused the request to fail, was:
    Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
    ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    ABEND: System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01- (see long text)</i>
    When I execute Querys that are on Infoproviders, everything is ok.
    Any Idea??
    Thnks a lot!!!
    Yolanda.

    Hi,
    Are you getting an ST22 dump in the backend, we used to get this kind of error in case of hierarchies, please check 2 things
    1. Agg level is active
    2. Check the query (option is available on query designer)
    thanks

  • System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02

    Hello experts,
    I get the following error when I execute the input ready query which was created on the aggregation level in BI IP.
    The system information is SAP BI Add on 7.X(based on 7.10) SP 2,Patch 1, Revision 490.
    Thanks
    Terminate: System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02- (see long text) [A299(BRAIN)]
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

    You may wish to check this
    Note 1048923 - BRAIN X299 in SAPLRRI2; form INPUTABLE_CHAFREE-02-
    Hopeit Helps
    Chetan
    @CP..

  • System error in program SAPLRRI2 and form BEST_WGR_02-01-

    Hi Friends,
    When I am trying to execute a query i get the error message below.
    System error in program SAPLRRI2 and form BEST_WGR_02-01- (see long text)
    Error when generating dataProvider
    The Same query can be executed after restarting BI server.( Hope No one recommends restarting BI server always).
    I am using SAP BI Patch level 3.
    Internet explorer 7
    Gui 6.4
    At the same time it is unable to disply variable screen in BEx Analyser with IE 7(Variable entry Screen appeares but No Input boxes are seen). Its Working fine with IE 6.
    Any Solution For This.
    Many Thanks,
    Anand

    Hi
    IE 7 is not so compitable with BEx. It always has the Popups problem..
    See the Note :919196 and  Note 1159538 - Issues in Internet Explorer   Note 950975 - SAP GUI for Windows: Support for IE7 (Internet Explorer 7)
    Hope it helps

  • System error in program SAPLRRI2 and form FEMS_IN_FORMULA_GET-01 Message

    Hi Gurus,
    I am getting error 'system error in program SAPLRRI2 and form FEMS_IN_FORMULA_GET-01' while checking and executing a query.
    The scenario is :
    - The query is using Replacement path formula variables and when I do remove these the error disappears.
    - I recreated the same formula variable but the error message reappears.
    - We are separating systems (moving on to new system) and the query runs absolutely fine in the old system.
    - The same variable is been used in some other queries as well but they run absolutely fine without any error.
    Any suggestions what is going wrong ? Should I raise an OSS to SAP, thats going to be the final GO !!
    I have tried almost doing all things but the error remains the same. This is quiet urgent and Reply will be much appreciated.
    Best Regards
    Ritesh

    Hi,
    Thanks for the reply. OSS note 982328 becomes irrelevant in my case as we are on SAP BW 7.3 and SP SAPKW73003. So this is the most recent and latest version of SAP.
    One more update is I tried regenerating the query in RSRT/RSRT1 but it starts in debug mode. This is of more worry to me now. Any suggestions or solutions are welcome, meanwhile I will raise this to SAP.
    Best Regards
    Ritesh Singh

  • System error in program SAPLRRI2 and form LRECH1_VARIABLE-02- 0

    Hi Experts,
    I have created a query on ODS when i am  executing the Query it is giveing the following System error.
    <b>System error in program SAPLRRI2 and form LRECH1_VARIABLE-02- 0</b>
    Pl.let me know how to resolve it.
    Thanks in Advance
    Sirisha

    Hi,
    Check all variables, you use in your query, together with variables used in restricted KF and text variables. It seems, that you use in one of your variables values from the other one which is missing in your query, and system cannot find the source.
    Hope it helps,
    DL

  • System error in program SAPLRRI2 and form LRECH_SUMM_FUELLEN_6-01

    Hi,
    I am trying to execute a report and it gives me this error  "system error in program SAPLRRI2 and form LRECH_SUMM_FUELLEN_6-01" I have done a bunch of cell editing stuff and when I go and see each cell looks good,I am not able to figure out where exactly this issue is. Can anyone help me with this. I tried to even switch on the Trace in RSRTRACE but it goes to the debugger and stuck in some SAP code. Don't know what exactly the problem is. Any help would be appreciated.
    Thanks
    Jay.

    Hello Jay,
    If valid for your system release and support package level please apply the SAP note 1129450.
    Best Regards,
    Des

  • System Error in Program SAPLRRI2 and form Get-properties-01-

    When We run the BEX query in Query Designer for cube 0sd_c03 for Sales Analytics and check the query  , I get the error
       "System Error in Program SAPLRRI2 and form GET_QUERY_PROPERTIES_01-" 
    My BW server is on patch level 20 .
    Please help me solve this.
    Regards

    Hi Manoj,
    Try to look up some OSS notes with this error message.
    Hope this helps...

  • BEx Query : System error in program CL_RSR_LFMM and form GET_CHANM-01

    Hi Guru's,
    I have a query built over an Infoset (with 3 ODS's and 2 master data Objects)and when I am trying to run the query by selecting Currency Conversion in the Amount key figures I am getting BRAIN 299 System error in program CL_RSR_LFMM and form GET_CHANM-01 Error. If I run without Currency Conversion setting It runs ok.
    Any Advice will be appreciated

    Solved on my own

  • System error in program CL_RSR and form GET_CHANMID-02-

    System error in program CL_RSR and form GET_CHANMID-02- (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    I got this error in SCM IDES 7.0,  Planning Area Initialization and Display MPOS...Please help me...

    Hi,
    One of our planning sequence is failing in production with similar error. Could you please let us know what is the fix for the issue you faced.
    System error in program CL_RSR and form GET_CHANM-01
    Please advice as this is very critical.
    Thanks,
    Tintu

  • System error in program SAPLRRS2 and form SELOPT_ASSIGN-01- (SAP BW 3.5)

    Hi,
    The following error occured when executed a query :
    "System error in program SAPLRRS2 and form SELOPT_ASSIGN-01-"
    I have read OSS note 907533 but from what I see in this note, I conclude the repair instruction
    only for SAP BI 7.0 so this note not for SAP BW 3.5.
    I have use button "Check query" and everthing is fine.
    Is there someone who can solve my problem?Thank you
    Regards,
    Satria

    This question is interesting. 
    One of my users got the same message today.  Wednesday, she ran some queries that had 3 variables on them.  She had no problems.  Yesterday, she tried to run the same queries, and one of the three variables did not show up on the variable screen.  The characteristic in question is not authorization relevent.  Others had no problems with these queries. 
    Today, I created a new query using the characteristic with no variables.  It ran fine for her.  I added the variable and she got the error message.
    So, I would really appreciate an answer to this thread!
    Ginny

  • System error in program CL_RSR_RRK0_SELECTION and form COLLECT_CHAFIX-02

    Hi All,
    I'm getting this error while running my Query, after executing the selection screen.
    System error in program CL_RSR_RRK0_SELECTION and form COLLECT_CHAFIX-02
    Please help .
    Thank you,
    Ketan Zare

    Hi All,
    Re-generating the query is not helping.
    I think i'll have to go with applying notes.
    Lets see, if notes solve my problem.
    Thank you,
    Ketan Zare

  • System error SAPLRRI2 and form BEST_WGR_02-03- (see long text)

    Guys,
    When I am executing Bex Query I am getting following error -
    System error SAPLRRI2 and form BEST_WGR_02-03- (see long text)
    Error when generating dataprovider
    I have tried executing through RSRT and its going into ABAP Debugger mode directly - I couldn't find any SAP related notes for this issue.  Please share your thoughts.
    Thanks,
    KK

    Hi,
    Check whether there is any enough database table space in your system. looks odd for checking database table space we faced similiar issue when running the reports in development system. Once the table space added they got fixed automatically.
    Thanks,
    Arun.

  • System error in program CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl

    Does anyone have any ideas or experiences for resolving "System error in program CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl"
    Your input is appreciated

    hi Arun,
    sap oss note 858458 may relevant for you, take a look, may need support package.
    Symptom
    When you execute a query for which the user does not have authorization, a system error occurs: CL_RSR_REQUEST; Form TEXT_ELEMENTS_GET:VARIABLE.
    Reason and Prerequisites
    This is caused by a program error.
    Solution
    BW 3.0B
               Import Support Package 28 for 3.0B (BW3.0B Patch28 or SAPKW30B28) into your BW system. The Support Package is available when Note 0783170 "SAPBWNews BW3.0B Support Package 28", which describes this Support Package in more detail, is released for customers.
    BW 3.10 Content
               Import Support Package 22 for 3.10 (BW3.10 Patch22 or SAPKW31022) into your BW system. The Support Package is available when Note 0783252 "SAPBWNews BW3.1 Content Support Package 22", which describes this Support Package in more detail, is released for customers.
    BW 3.50
               Import Support Package 14 for 3.5 (BW3.50 Patch14 or SAPKW35014) into your BW system. The Support Package is available when Note 0836439 "SAPBWNews BW Support Package 14 NetWeaver'04 stack 14" ", which describes this Support Package in more detail, is released for customers.
    In urgent cases you can implement the correction instructions.
    To make information available in advance, the notes mentioned may already be available before the Support Package is released. However, in this case the short text still contains the words "preliminary version".

  • System error in program CL_RSD_Multiprov and form GET_PART_IOBJNM_CMP_01

    Hi Experts,
    iam executing a query on multiprovider, below is the errors im getting..   so my requirement is to save the query as local, in production system.....
    Error i gt:   1.  Infoprovider was changed or activated at runtime
                      2.  system error in program CL_RSD_Multiprov and form GET_PART_IOBJNM_CMP_01
    Kindly give me some inputs
    Thnks
    Sinu

    activate all the infoproviders underneeth the multiprovider and activate the multiprovider also
    use below programs
    RSDG_CUBE_ACTIVATE
    RSDG_IOBJ_ACTIVATE
    RSDG_MPRO_ACTIVATE
    RSDG_ODSO_ACTIVATE

Maybe you are looking for