Executing report in portal

Hi,
My requirement is to execute a Z report in MSS. When manager execute this the output should be obtained for only the direct reports of the manager. How can this be acheived?
It will be great if manager can select from a selection screen which employees report should be displayed.
Please advice.
Thanks!

Hi SasidharG
Please run the support desktool in its latest version 77.... and then look at the systeminfo.txt file that the tool produces... this is an automated report designed by SAP development to run through all areas of portal/bi connectivity issues on a users portal and to provide remedies to any issues found. (Please see note: 937697) this does involve a bit of work at the outset but it is a very valuable tool which will enable you to fine turn your bi/portal connectivity.
best regards
Orla.

Similar Messages

  • Error in executing report in portal

    Dear all,
    From the query designer while  am  executing the report in the portal,
    the pop showing the web application will therefore be ended,
    If i try to allow temporary not resulting screen showing no results,
    am executing report from multiprovider,which is combine from 3 cube 2 DSO having data around 10000 records,
    But when i executin in the portal "No data avaialabale"
    even i tried either by directly entering a URL in the address row of the Web browser or by navigating to another site in the SAP Enterprise Portal also does not giving the diffrence,
    plz clarify...

    Hi,
    I dont have CKF and RKF but am used filter as charecteristic restriction,
    should i know bcoz of these filter only ,am not getting data in Portal?
    if yes wat is the logic behind to be caused like this?
    i can able to enter in portal and i able to see the content,   but i cant able to see the data even i have lakes of data in my datatargets,....
    could u explain in detail?

  • Error while Executing reports in Portal

    Hello All,
    We are facing the following Error message while running reports in Portal.
    We have recently updated the EP Patch to 17..  since then we are facing the issue.
    500 Internal Server Error
      BEx Web Application
    Failed to process request; contact your system administrator
    Error Summary
    Exception occured while processing the current request; this exception cannot be handled by the application or framework
    If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
    Root Cause
    The initial exception that caused the request to fail was:
    com/sap/portal/services/api/connectorgateway/IConnectorGatewayService
    Log ID
    001A4B0717C8005E0000014900002E07000498168CA315E3
    While checking the KM Content, we are getting the following error:
    Runtime Error
    An exception occured while processing the request.
    Additional information: com/sapportals/wcm/util/uri/RID
    Exception ID = 7004f63e-daf3-2d10-689e-add88da33d97      Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 06:27_27/12/10_0014_49226950
    Refer to the log file for details about this exception.

    Hi Sneha,
    Please check the default trace log file in NWA. Also verify that BI System and portal system should be same SP level.
    If there is any mismatch in the SP level then issue might comes. So check SP level for Bi and Portal.
    Regards, Arun Jaiswal

  • Cannot execute report over portal  (WWC-51000)

    Hello forum,
    i created a report in the report builder and then i tried to deploy it into our 10g AS Portal (new installation with one infrastructure machine and one portal machine). I registered the reports server and created report definition file access to this file. machine. I try to run the report over the "run as portlet" -link and i get following error message:
    The preference path does not exist: ORACLE.WEBVIEW.PARAMETERS.1109700064110 (WWC-51000)
    if i try to execute the report over the "run"-link in the RDF-Access section i see following error message:
    The requested URL /pls/portal/testprovider.RPT_testreport.show was not found on this server.
    I placed the rdf-file in the reports/samples/demo directory of our portal instance machine. So what is wrong here , is the reports server wrongly configured? but where?
    thanks for your help!!
    katharina

    Hi Jaya,
    Have you got yot web template in an iview?  Do you get an error when trting to access it form the portal?
    Cheers,
    Nick

  • Issue while executing report in Portal

    Hi All,
    We have come across a typical error in the portal while the user access her reports .When ever user is clicking on the report
    in the portal a total blank screen( or white screen rather )  is visible and they have to log out and log in very frequently.We have suggested them to clear their cache in their desktops  to avoid this situation ,  but they are complaining that this blank screen is coming very frequently now. Does this have any thing to do with the reports. We dont have authorizations for this application currently and they are pretty straight forward ones and with not many CKFs/RKFs .Also we have went live in jan 2010 for this application and there is very limited data in the cube as well ,
    Any of your suggestions and appreciated in this regard,
    Regards,
    Sasidhar Gunturu

    Hi SasidharG
    Please run the support desktool in its latest version 77.... and then look at the systeminfo.txt file that the tool produces... this is an automated report designed by SAP development to run through all areas of portal/bi connectivity issues on a users portal and to provide remedies to any issues found. (Please see note: 937697) this does involve a bit of work at the outset but it is a very valuable tool which will enable you to fine turn your bi/portal connectivity.
    best regards
    Orla.

  • Authorization problem to execute a report through portal

    Hi All,
    One of user while trying to execute report through portal, getting error message saying that
    "you are not authorized to execute the report XXXXXXX'
    Can not load query <query name> (data provider <data provider name> No authorizations for requested service.
    The report is a web template which is getting executed through portal.
    User is having all the authorizations to execute the report(report autho as well as infoprovider autho also)
    we have regenerated the user roles , done user comparision....every thing is OK.
    Still unable to execute the report.
    Please advice what can be done in this case....
    Regards

    Hi Shaik,
    Are you able to run this report with your user id?
    If so check the role or authorization objects which are missing to the user.
    And also check whether he got portal roles assigned to his profile.
    Regards,
    Ravi Kanth
    Edited by: Ravi kanth on May 12, 2009 2:06 PM

  • Error message in BW Report through Portal

    Friends,
    I really need your help to remove the waring message.
    For the purpose of changing the description on the Selection screen from “Cost Cetnters (Authorised Values)” to “Funds Centers” I had changed the ZCCTRATI variable description to Funds Centers
    Issue:
    When we open the old report we see the following information message.
    " Value if variable ZCCTRAT1 is automatically converted
    I did go to TC RSRT as of Dinesh,Vijay advice ,Just want to know that what message i need to Click .because i could nt find the relevant message
    Can u help me how to remove this ?

    Bhanu,
      Thanks for u r reply.This warning message appears every time i execute the report through portal.
    Any idea ?
    Regards
    Mano

  • Portal Runtime Error while accessing BW reports through portal

    Hi,
    We are facing portal runtime error(An exception occurred while processing your request. Please send the exception id to your portal administrator) while accessing BI reports through portal frequently.
    We are unable to trace the error in the 'default trace' log file and although refreshing the cache solves this issue, it is difficult to explain this to every user individually.
    After many such errors, We found one log entry, which we are now not yet sure if it is relevant. The error states:
    1.
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &#39;&lt;System.Access.WAS.protocol&gt;://&lt;System.Access.WAS.hostname&gt;&lt;BWLauncherComponent[PORTAL_URL]&gt;;jsessionid=&lt;Request.JSessionID&gt;?sap-ext-sid=&lt;ID[url_ENCODE]&gt;&amp;Language=&lt;Request.Language&gt;&amp;theme=&lt;LAF.Theme[url_ENCODE]&gt;&amp;sap-lafversions=&lt;LAF.AllVersions[url_ENCODE]&gt;&amp;&lt;Authentication&gt;&amp;&lt;Report&gt;&amp;&lt;BusinessParameters&gt;&#39;; the problem occured at position 230. Cannot process expression &lt;LAF.AllVersions&gt;
    at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
    at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:540)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:423)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Content pass of Application Integrator failed.
    Component Name:       'com.sap.portal.appintegrator.sap.BWReport',
    Context Name (iView):  <iview name location>
    Top Layer:            'BWReport/TopLayer',
    Producer ID (FPN):    'null',
    System Alias:         'Sap_bw',
    2.
    The cluster server element 111111 is not added in the EP cluster context,
       because prtbridge on 111111 is stopped  or not yet started (maybe the server is starting or shuting down).
    Please suggest us if the above logs are related to the issue or not
    Kindly provide us any inputs or solutions.

    Hi All,
    We are also having similiar type of error in our portal. 
    com.sap.engine.services.prtbridge##com.sap.engine.services.prtbridge
    #######SAPEngine_System_Thread[impl:5]_13##0#0#Error#1#/System/Server#Plain###
    The cluster server element 125898350 is not added in the EP cluster context,
       because prtbridge on 125898350 is stopped  or not yet started
    (maybe the server is starting or shuting down).
    We have implemented the FPN using RRA.
    This error comes only for few users when they navigate in Portal. After clearing the cache, it works for all. Kindly help us to resolve this issue.
    Regards,
    Venkatesh

  • Unable to run a report through Portal.

    Hi All,
    I am not able to run a particular BEX report through portal.
    I get a white screen and no pop-up for selections and later nothing happens.
    I have checked my Roles but no changes has been made.
    My other colleagues are able to run the report.
    Please let me know what could be the possible reason/solution for such an issue.

    are different roles assigned?
    i.e., for you and for your colleagues.  Please try login with your id in their PCs and vice versa.
    let check the compatibility. if you are failed to execute in that PCs also, then it should be authorization issue. Ask your basis folks to add that particular info area and info cubes to your role.
    Hope this would give you clear pic.

  • Error while executing Report in BI7.0

    Hello Friends,
    My BI7.0 system is a fresh installation.
    I have created a query using Nw2004s Bi Frontend-Bex Query Designer.
    After saving the changes when I click on Execute Button (in between Saveall & Check buttons) I am getting an error in the browser
    The page cant be displayed. & the URL is
    http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=IC_SLS_Q001&VARIABLE_SCREEN=X&DUMMY=1
    Is this URL correct one? Or do i need to make any further settings ? If so what are those settings & where they need to be done?
    Why am i not able to execute the Bex report in the browser?
    Please let me know
    Thanks
    mv_d

    Further to what Manjunath has pointed out..
    Note Symptom
    After pressing the "Execute" button in Web Application Designer, Query designer or Report Designer, the url is not valid. Possible variations are:
    The server is not included
    The port is not included
    URL is like http:///irj..... (missing server & port)
    Other terms
    URL generation, Execute Query, Execute Web Template, Execute Report
    Reason and Prerequisites
    Missing configuration of the portal. Check following:
          1. Start the transaction SE37
          2. Call the Module RSWAD_URL_GET
          3. Fill the parameters as follows
               I_ACTION: NEW
               I_OBJTYPE: QU
               I_TECHNAME: QUERY
          4. Execute and check the result
          5. E_URL=http://<your expected server>:<your expected port>/irj/...&QUERY=QUERY
    Solution
    If the result is as you expect, the problem is not in the configuration. In other case please do following:
    Run the transaction SE16
    View the table RSPOR_T_PORTAL
    Execute it (expand the width to see the parameter URL_PREFIX)
    Check if there is a prefix for your portal maintained
    If not, correct it editing this table directly.
    For any other configuration problems please read the note 917950
    Hope it helps...
    Arun

  • XSTRING with Binary of PDF - display R3 report in portal

    Hello,
    We have a requirement to show an R/3 report on portal as PDF. User will then be able to Print/Save the same.
    I have browsed through different posts on SDN and
    The idea I have is:
    1. Print the report to spool (Backend).
    2. Convert the spool to pdf (Backend).
    3. Create a FM (in the backend) that exports an xstring with the binary of the pdf (of the report)
    4. Using webdynpro for Java, create pdf form based on binary xstring.
    5. Render the pdf to portal and display it in portal.
    I have a couple of questions regarding this approach:
    1. What exactly does the function module needs to export (what format and type should be used)?
    2. How should the data being sent from the backend be handled in the Webdynpro Code? (What Context attribute should be created and what type should be used?)
    Please share your experience if some one had developed a similar application. Any sample code would be really appreciated.
    Thanks for Reading the post and for your time.
    Regards,
    Raj

    Hi Raj,
    Thanks for the link, i followed the procedure the way it mentioned in the link, but i am getting the below error as nullpointer exception, i checked everything but still i am getting the error.
    i can see one thing in webdynpro java code , i am getting warning message for this " wdwebresource"
    as deprecaiated, what is this meant?
    thanks,
    vinay
    java.lang.NullPointerException
         at com.vin.view.PdfView.wdDoInit(PdfView.java:115)
         at com.vin.view.wdp.InternalPdfView.wdDoInit(InternalPdfView.java:137)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
         at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
         at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:207)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

  • Discoverer viewer in portal or Drill to detail in Disco report in Portal

    Hi
    Is it possible to embed discoverer viewer into Portal page. I know one way, I can achieve this in older versions by using <IFRAME src="worksheet url"></iframe> as HTML portlet. But, the problem here is that, our Discoverer viewer is SSO protected. So,I don't want user to single sign on again, as they have already have done that when they got into portal.
    My second question is , I have developed Page-Detail report in Disco plus, also I have Drill to Detail in the same report. Drill to Detail is created using "Manage Link" option. When I deploy this report into Portal using Disco Portlet provider, firstly in portal it is not showing the Page Item, also the Drill through link also is not showing.
    Any help on the above questions would be greatly helpful.
    Thanks
    Balaji

    Hi
    Firstly thank you very much for your response.
    The Disco report I have is a Discoverer Plus report with Drill to Detail to another workbook(developed through manage link). But this Drillable link is not showing in the published Disco portlet. Are you saying that it should in the published disco portlet? .. As posted in previous response , I know this would work from Analyze link(which basically lauches viewer)..
    But users would like to see this drillable link in the report in portal page itself(which means on the published portlet itself). To achieve this only, I used Iframes in Html portlet and showing the Discoverer viewer url. It works fine, but only thing is each time user naviges to portal page, it executes the report which takes some time. I am trying to avoid the execution process. I think one solution is I can just schdule these Disco reports and that way it will not query the database each time. I was wondering if there is any other solution maybe I am missing
    Thanks
    Balaji

  • Error when executing report due to 0FISCPER

    Hi All,
    I am using a customer exit in my query to calculate the year to date numbers for current Fiscal Period and prior fiscal year (via offset -12). When I execute the query it works fine but when I save it to my portal favorite and re-execute from the favorite, it throws an error: 
    Termination message sent
    ERROR BRAIN (648): Variable value  must be numeric
    ERROR BRAIN (599): For characteristic 0FISCPER, enter value in a permitted format
      MSGV1: 0FISCPER
      MSGV2: 200/001/
    ERROR BRAIN (599): For characteristic 0FISCPER, enter value in a permitted format
      MSGV1: 0FISCPER
      MSGV2: 200/005/
    ERROR BRAIN (648): Variable value  must be numeric
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    Here is my customer exit code. Do you see any issues with the exit that is causing the above error?
    DATA: lv_cur_period(3) TYPE n,
              lv_cur_year(4) TYPE n.
       WHEN 'ZCC_FPER_YTD_INTERVAL'.
         IF i_step = '1'.
    Determine current fiscal period
           CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
             EXPORTING
               i_date               = SY-DATUM
               i_periv              = 'MR'  
            IMPORTING
              E_BUPER              = lv_cur_period
              E_GJAHR              = lv_cur_year
            EXCEPTIONS
              INPUT_FALSE          = 1
              T009_NOTFOUND        = 2
              T009B_NOTFOUND       = 3
              OTHERS               = 4
           IF sy-subrc <> 0.
           ENDIF.
    Enter interval into variable
           CONCATENATE lv_cur_year '001' INTO l_s_range-low.
           CONCATENATE lv_cur_year lv_cur_period INTO l_s_range-high.
           l_s_range-sign = 'I'.
           l_s_range-opt = 'BT'.
           APPEND l_s_range TO e_t_range.
         ENDIF.
    Thanks a bunch.

    Hi Venkat and Gaurav,
    Thanks for your replies. The format of Fiscal Period in the first variable screen is correct with the Concatenate statements that I originally had in the customer exit. It displays an interval of 001/2010 - 005/2010 which is what I want.
    CONCATENATE lv_cur_year '001' INTO l_s_range-low.
    CONCATENATE lv_cur_year lv_cur_period INTO l_s_range-high.
    I created another i_step = 2 variable with 'ready for input' unchecked and added it to the original i_step = 1 variable within the RKF. As I have limited knowledge of coding customer exists, I added the following code for the 2nd variable that I found on SDN as seen below. After applying this code and executing the "saved report on portal favorite", the original error message went away and I get to the variable screen but the format that displays now is 201/001/ - 201/005/.  Why does it work the first time it is executed and why does it mess up the format when executed from portal favorite, really confused.
       WHEN 'ZCC_FPER_YTD_INTERVAL_2'.
         IF i_step = '2'.
           READ TABLE i_t_var_range WITH KEY vnam = 'ZCC_FPER_YTD_INTERVAL' ASSIGNING
                          <input>.
    Determine current fiscal period
           CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
             EXPORTING
               i_date               = SY-DATUM
      I_MONMIT             = 00
               i_periv              = 'MR'  
            IMPORTING
              E_BUPER              = lv_cur_period
              E_GJAHR              = lv_cur_year
            EXCEPTIONS
              INPUT_FALSE          = 1
              T009_NOTFOUND        = 2
              T009B_NOTFOUND       = 3
              OTHERS               = 4
           IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
           ENDIF.
    Enter interval into variable
           CONCATENATE lv_cur_year lv_cur_period INTO lv_cur_fiscper.
           l_s_range-low = lv_cur_fiscper.
           l_s_range-high = <input>-low.
           l_s_range-sign = 'I'.
           l_s_range-opt = 'BT'.
           APPEND l_s_range TO e_t_range.
         ENDIF.

  • Who change message of reports in portal?

    I need change message in reports of portal, I execute reports,when no exist in table show the following message: No row returned. By I want show message:The document no exist. Who i can make this?

    Hi there,
    Metalink Note:183131.1 - How to Customize the Message "No Row Returned" from a Report should answer your request. It is just to add some PLSQL custom code...
    I hope it helps...
    Cheers,
    Pedro.

  • Error while attaching document to report on Portal - Invalid selection valu

    Hello All,
    We are running our reports on Portal and as per the business requirement the users have to create comments or attach documents to certain amounts in certain columns and once they create the comment a document icon shows up near that amount (for example there are 3 columns Budget, actual, balance then the user have to create comment for some amounts which needs explanation) they do that from context menu  Documents -> Create new Comment.
    Now we want those documents to be saved on Infoprovider level and not on master data for any particular object. We have activated the flag "Characteristic is document property" on related infoobjects. We have the flag to display document icon on Infoprovider active in the web template. Now when I run the report I am able to create new comments on first two columns and when the report refreshes it shows me icon near that amount but it gives me errors on third column after the report refreshes itself. Now when I go in portal KM repository where documents are stored I do see the document that I created for the third column as well so looks like the document is getting created and being stored but the issue is when it tries to display the icon on that third column.
    The error I get is this:
    The initial exception that caused the request to fail was:
    Invalid selection value:  AttributeMember
    com.sap.ip.bi.bics.dataaccess.resource.impl.bi.exceptions.BicsResourceBwRuntimeException: Invalid selection value:  AttributeMember
    at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.setLowForced(ProviderRange.java:297)
    at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.setLow(ProviderRange.java:291)
    at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.set(ProviderRange.java:469)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.selection.SingleMember.set(SingleMember.java:125)
    at com.sap.ip.bi.km.common.assignment.AssignmentMember.isContained(AssignmentMember.java:192)
    Please give some inputs if anyone is facing same problem or is anyone has worked previously with this kinda of stuff.
    Thanks in advance.
    Kiran

    Hi!
    Have you solved this problem? I have the same problem after a SPS implementation (SPS 17). The message appears when we select a single value in a DP (hierarchical filter item) that filters another one, but when I select a node it doesn't.
    Before the patch implementation the apliccation worked ok.
    Any idea?
    Thanks in advance.
    Jose

Maybe you are looking for