Executing RPR_ABAP_SOURCE_SCAN causing issues!

Hello,
RS_ABAP_SOURCE_SCAN ( previoulsy RPR_ABAP_SOURCE_SCAN) is meant for scanning the programs, but, as it does not have any mandatory selection criteria, in this case, if we run it wide open, the system performence is drastically coming down (many users unable to open new sessions, compiling progrmas etc), hence thinking to do not happen like that!
I have a option of restricting the selection criteria, but, when i saw it does not have any enhancement spots!
Pls. let me know what are the good options to see that users/developers to do not run it wide open?
There are couple of implicit enhancements, but, not in the selection seelction screen piece, if so, i would have make some fields as mandatory. Pls. let me know how to restrict the prog, to do not tun wide open?
Thank you

Hi M_S_Raju_0613,
you have so many ways of using system resources excessively.
If RPR_ABAP_SOURCE_SCAN runs longer than 5 minutes, you may have changed the default system parameters. If it brings down performance so that users are unable to open new sessions, compiling progrmas etc, then somethings is wrong with your system. As it does not use any parallel processing, it can simply not use more than one process.
If you still want to pick this lonely single issue, you may put an implicit enhancement where ever you want and just check if all selection criteria are initial. This will not help you anyway because the user may also use some * in the selection criteria to get the same result.
Sorry, this is nonsense.
Regards,
Clemens

Similar Messages

Can too large a folder cause issues and effect performace of my Mac Pro

Hi, I have a 180 gb folder filled with important data within my Home folder. This folder has a many subfolders as well. The folder is on my startup drive and where I have Snow Leopard installed. Can too large a folder cause issues with my mac and effect performance? Thanks

another way to ask, would you make better use of, and improve I/O and performance, if you used your other drive bays? yes.
Boot drives with even less than 50% free is probably not a good idea. All depends on whether 200GB is on 1TB or on 500GB drive. And how fragmented free space even.
Lifting, loading and writing or copying 4GB files of course does have an impact, so if you work with 2GB files in CS5....
Having a dedicated type boot drive, media drive (and isolate media and library files) as well as scratch drive is normally done with Mac Pro.
The biggest bang in performance: lean mean SSD boot drive.

MovieClip Filter Causing issues with EventListeners (mouseEvent.ROLL_OVER)

Hello,
I have been working on a flash photo gallery for the web. It loads thumbnails from an xml file into a loader which is then made the child of a movieclip.
The thumbnails are animated and triggered with mouse events of ROLL_OVER and ROLL_OFF. I have this working, or appearing to, when the movieclip containing the loaded thumbnail has no filters applied to it.
I want add a drop shadow on the ROLL_OVER event and remove the drop shadow on the ROLL_OFF event. I also have this working, however my problem arises when I mouse over the very edge of the movieclip. This cauese the ROLL_OVER and ROLL_OFF function to fire in rapid succession, creating a flashing dropshadow. This looks aweful and I really have no idea what would be causing this issue.
Thanks in advance for any advice!
Regards.

Thanks for the reply.
I also found it difficult to believe that the filter was causing issues with the roll over/out events. I will expand on the example code you provided so you get an idea of what I am trying to accomplish and where my issues arise.
EDIT: I should add that the issue is only present when I tween AND add a filter. If I only add a filter or if I only tween I have no issues but the combination or adding a filter and tweening causes the OVER/OUT events to fire rapidly.
//This code does not result in a flashing animation
myClip.addEventListener(MouseEvent.ROLL_OVER, overClip);
myClip.addEventListener(MouseEvent.ROLL_OUT, outClip);
function overClip(e:MouseEvent):void
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1.5 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1.5 , 3, true);
function outClip(e:MouseEvent):void
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1 , 3, true);
//However if i add these lines of code to add and remove a filter I can observe the flashing effect when the mouse is near the edge of the moveclip
myClip.addEventListener(MouseEvent.ROLL_OVER, overClip);
myClip.addEventListener(MouseEvent.ROLL_OUT, outClip);
function overClip(e:MouseEvent):void
   myClip.filters = [myDropShadowFilter];
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1.5 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1.5 , 3, true);
function outClip(e:MouseEvent):void
   myClip.filters = [];
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1 , 3, true);
Is there something obviously wrong with this approach to adding a filter/tweening? I am fairly new to flash.
Thanks again!
Message was edited by: Dafunkz

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

Sounds like you may have been in extended display mode. If so, all you had to do was drag a window to the projector display. Or, if you wanted mirrored mode, in display preferences select check mirror display.

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

When I plug in my Lacie Firewire 800 drive it causes certain apps to crash. Chrome will immediately crash when I open it, so will DVD player. It's only when I plug in my Firewire 800 drive, USB does not cause issues. What's the deal?

When I plug in my Lacie Firewire 800 drive into my Mid-2009 Macbook Pro running Mountain Lion - 10.8.2, it causes certain apps to crash. Chrome will immediately crash when I open it, so will DVD player. It's only when I plug in my Firewire 800 drive, USB does not cause issues. What's the deal?
I've restarted, verfied the disk, repaired permissions, smc reset.. don't know what else to do..

Contact Lacie since it's their product you are having issues with.

How to check which RFCs causing issues in the system and RFC response times

Hi,
We have an issue with the RFC response times in CRM and need investigstion. We need to know which Which RFCs causing issues and how we can solve the problems.
Regards

Hi,
chek the below code
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_EXIST
EXPORTING
FILE = W_FILENAME
RECEIVING
RESULT = W_RESULT
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
WRONG_PARAMETER = 3
NOT_SUPPORTED_BY_GUI = 4
others = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-* MSGNO WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF W_RESULT IS INITIAL.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_EXIST
EXPORTING
DIRECTORY = W_FILENAME
RECEIVING
RESULT = W_RESULT
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
WRONG_PARAMETER = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
ENDIF.
ENDIF.
IF W_RESULT = 'X'.
RC = '1'.
ELSE.
RC = '0'.
ENDIF.
reward if helpful.
Regards,
nagaraj

Do multiple bindings still causing issues for PowerPivot workbook in SharePoint 2013

Do multiple bindings still causing issues for PowerPivot workbook in SharePoint 2013 as they did in SP2010? Here is the link about 2010 issue :
http://support.microsoft.com/kb/2712071

Hi Norm,
I searched internally, and I couldn't find any information related to this issue applied to SharePoint 2013, it shouldn't exist in SharePoint 2013.
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Reader causing issues with dropped underscores in courier new font

When converting a microsoft word document in 2013 or 2007 to a PDF is causing issues with dropped underscores. It only seems to happen in courier new. For instance if I have _someCode, when converting this over to a PDF file I will sometimes see _someCode and sometimes I will see someCode. If I open this file in a different pdf reader then it looks correct 100% of the time. If I copy and paste into another application then the underscore shows. This is a major issue for people putting code into a PDF document as underscores are important and courier new is what we often use.

I love how quick you are to throw Microsoft under the bus. Often it is their fault. In this case I believe you are 100% wrong and absolutely short sighted to ignore this. As I said in my original email, which you apparently missed, I have tried this in multiple PDF viewers and Adobe Reader is the ONLY reader that misses the underscores. Foxit, PDF Exchange and Sumatra all render it perfectly. Adobe reader missed 6 underscores in my document that has 18 underscores. 30% of the time in this document Adobe Reader makes the underscore invisible. And if I switch the zoom to 100% instead of 148% (which is the default for me for some reason) then Adobe Reader misses 7 of them. This doesnt occur in the other readers. Blame Microsoft all you want but the simple fact is that Adobe Reader has issues reading courier new's underscores. It needs to be fixed.

Exchange upgrade causing issues with internal wiri...

Recently our exchange was upgraded to accommodate bt infinity and at the same time our broadband started playing up. we called bt and I spent 1.5 hours checking and re checking equipment with the call center. Tests were done with the hub at either end of the internal wiring. All the tests were still showing faults even with hub connected to the test socket. They asked me to leave connected for 24 hours while they monitor the line. They promised to call me back which they did not. I called them again the following day to be told I should have left the hub in the test socket which I was not told the previous day. I then had to wait 48 hours while they monitored the line this time in the test socket. All the tests still showed the fault was still there so an engineer called out.
The hub was still in the test socket when engineer arrived and the first thing he did was hook up his test equipment to the test socket and he stated there and then that there was nothing wrong with the line but it had been throttled down. 2 minute phone call and 10 minutes later broadband was back and working perfectly at the test socket. He checked the internal extention and the faults were being thrown up by an extension that has been in place for 10 years +. He stated to me that the new equipment installed in the exchange was more advanced and did more line checks so, although this equipment has been used for Internet with BT for 10 years it is no longer adequate.
All of this I find understandable but the whole way that BT handled this from day 1 of my first call has been appalling. BT openly admitted that the original engineer calls were handled badly and we were credited £9 for the lack of services we had for overly long time. However we are now, 2 months after this, faced with nearly £130 charge for the engineer visit which, looking back with the info I have now, was completely unnecessary. Had the engineers on the phone bothered to reset the line while hub was in the test socket when they were allegedly monitoring it for 48 hours they could have told me there were no faults on their equipment up to the socket and I would have sorted out the internal wiring myself. Even now I can find mention on the Internet of old wiring causing issues but no specific posts to do with exchange upgrades potentially meaning that you need to upgrade internal wiring or mention by the BT call center itself on any of the calls I made to them. All I was told was that everything up to the main box is BT and everything after that mine but since we have made no changes to the wiring we did not think it was applicable until the engineer arrived and told us what he told us then. Yesterday I called Bt again around 9am to dispute the charge. I was informed that because the fault was with our equipment the charge stands. I explained all of the above and I had my case put to the review team. I was told I would get a call back within 4 hours which I did but the phone rang 3 times and as I answered they hung up. I then got a text saying they had tried to call and asked for me to call back which I did to be told that his computer wasn't working. He took my details and said someone would call me back which no one did. I chased again to be told that someone would definitely call me that day. No one did. I chased again today to be told the decision still stands. He has put to final review and promised a call back within 5 days. Until this is resolved direct debit is cancelled. To the letter of the contract we have with BT this is our charge to pay I know that but this could have been avoided if the information was out there on the net, if the original checks done over the phone were done correctly or if I had been told this directly by Bt themselves prior to the engineer being called out which is why I am posting this here so hopefully no one else falls into this trap.

You're right I'm not connected to the BT infinity cabinet. But the BT Infinity cabinets all still route back through the exchange that I am connected to -
http://www.ichilton.co.uk/blog/phones/faster-broadband-bt-infinity-fibre-to-the-cabinet-coming-to-in...
Quote :
What this modem does is connects using VDSL from your home to the VDSL cabinet using the existing copper wires, on to the DSLAM, back to the exchange (over the fibre) and on to BT’s core network.
Your phone line is then still terminated in the original cabinet for telephony (using the cross connect between the old and new cabinets I mentioned above) and back to the exchange over the original multi pair copper cable as it always has done.
http://www.robertos.me.uk/html/fttx.html
Quote:
FTTC involves BT Openreach installing a new street cabinet near to the existing one and linking the two. They run optical fibre from the exchange to the new cabinet then link individual lines from the old cabinet to the new one and back to get VDSL2 onto the copper connection to the premises. The PSTN phone connection continues to operate over the pre-existing cable from the old cabinet to the exchange. It does not get put onto the fibre connection.
In other words the linkage is Exchange >> Old >> DSLAM in New >> Old >> Premises. (Traffic in both directions of course!)
Presumably the equipment in the exchange cannot stay as it is and is upgraded in the process?

Explorer InfoSpaces on HANA Views - column label changes cause issues?

Key question is – do simply label changes in HANA view cause issues with Explorer InfoSpaces? Furthermore, on source view changes, does the InfoSpace also need to be adjusted?
What we have observed is this
1. InfoSpaces have been created using the “SAP HANA appliance” connection highlighted below. The corresponding “Home” screen is shown below that, so there are around 14 or so InfoSpaces that should be available.
2. Yesterday, there was a production deployment that contained some changes to the underlying views in the form of label changes (not column name changes).
3. Now, in the “Manage” screen we cannot see these same 14 InfoSpaces available under the expected connection. Instead, they are all available under the “Source Unavailable” node with the default action of “Change Source” shown.
Additionally, we are seeing some strange behavior where certain facets are actually containing the wrong data. For example, in a facet/column called “Source Type”, where the expected values are “NBP or PBP”, we are seeing Material numbers like “00001112453”. This leads me to believe that there is a mapping issue under the covers.
Thanks,
Justin

Our BOE Explorer is Version: 14.1.1 Build: 1072 - I’m not sure how this corresponds with your 69.01 to 74 numbers (release note numbers?).
But it sounds identical to your description.
One of our observations: if we change the sorting on a facet pane using the upper right sort control the values are corrected for a while, at least until we change a measure and the set of facets get updated with the miss-mapped values again. This only occurs on some models and we haven’t been able to determine what the underlying criteria might be that aggravates the problem.
Thanks for your input – it helps us determine a viable path forward.
Cheers,
Tony

I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. How can I resolve this issue?

I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. There are a number of issues I have run across:
If I have four tabs open on Safari then I start to get a flickering on the screen from the GPU refreshing
When I leave the computer alone for more than 20 mins the screen saver should start -- what happens is that the screen goes to black. When I move the cursor I do not get the login screen. I have to reboot
FireFox Web browser will not run
I get issues with the computer running very slowly
I have already turned off the transparency option in settings. Any ideas??
Cheers
Matt
MacBook Pro, OS X Yosemite (10.10), GPU / Video Card with Yosemite

Do you have more than one OS on the Mac?
You may want to look at something like http://bjango.com/mac/istatmenus/. This has a Free Trial window, but it is a commercial application. If there are any heat/sensor issues, this may help.
A SMC Reset or PRAM/NVRAM reset may also help.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Startup key combinations for Intel-based Macs - Apple Support

[svn] 1435: Delete fles-sdk-description. xml altogether as it is causing issues when syncing to the sdk.

Revision: 1435
Author: [email protected]
Date: 2008-04-28 13:39:06 -0700 (Mon, 28 Apr 2008)
Log Message:
Delete fles-sdk-description.xml altogether as it is causing issues when syncing to the sdk. Because it gets updated every time you build it also gets marked by svn as being out of sync and that is a pain too so... I opted to just create it on the fly and then update it and not have it checked in
Modified Paths:
flex/sdk/trunk/build.xml
Removed Paths:
flex/sdk/trunk/flex-sdk-description.xml

>>D:\GoldSun\Source Code\Flash\ExtentionTest\lib\Build>D:\SDKs\flex_sdk_4.5.1.21328\bin\adl -package -target ane DaveExtension.ane extension.xml -swc DaveExtension.swc -platform iPhone-ARM library.swf libDaveExtention.a
Either its a typo or by mistake you wrote adl in yout bat file. Change it to adt since that is the file that will package your ane. adl is just used for debugging/running on Desktop.
Hope this helps. let me know how it goes.
Thanks,
Meet

IOS 7 Safari (as well as OSX 10.9) Credit Card prompt "not now" causing issues

Experiencing the same problem as this thread from stack overflow. safari on iphone/ipad http://stackoverflow.com/questions/21769058/ios-7-safari-as-well-as-osx-10-9-cre dit-card-prompt-not-now-causing-issues
Safari on ios7 devices stops my form from submitting when it prompts to remember card.
there must be a workaround other than pulling a pw field off the page???

You can condense it down to a couple of options, shadowbeast, if you have a computer that is regularly maintained, not over-full, doesn't have much in the way of third party haxies installed, has had its directories checked recently, don't try to install the update while simultaneously running other software, etc etc. Trouble is in many cases such parameters aren't met!
Using an update situation as an opportunity to undertake the general maintenance that should be done every month or so on any computer , (even if it is a Mac!) helps to forestall many other problems, too, as well as helping to ensure that the update process goes smoothly.
I agree that the "Combo" update can be a good idea, sig, and I've usually done so in the past myself. In some circumstances it can certainly help to overcome problems that have arisen along the way. These days, however, the updates themselves tend to be very large (in this case the "combo" version is over 800 MB in size) and I'm very aware that many , many people use the smaller Software Update versions. These seem to be less problematic than they used to be in the past, though if anything is problematic after the installation downloading the Combo and re-installing it over the top of the SU version is a very good idea.
I've been trying the SU updates regularly myself since SL arrived on the scene, and all have gone smoothly. Mind you, this has been on a couple of pretty well maintained machines.
Cheers
Rod

Which RFCs causing issues in system

Hi All,
We have an issue with the RFC response times in CRM and need investigstion. We need to know Which RFCs causing issues in CRM and how we can solve the problems.
Kindly let me know as earliest as possible.
Regards

have a look here:
ST03
Go to EXPERT MODE
if the problem is happening now then you could use last minute load ( for a specific user for example)
if you have no cllue , or it happens always:
workload, Total , day, "today"
in the analysys views: RFC Profiles
now it depends on if you are using it as server or client, there you see all FM's called via RFC ; number of calls, total execution time, etc.
Hope this is usefull;

Executing RPR_ABAP_SOURCE_SCAN causing issues!

Similar Messages

Maybe you are looking for