Executing Transaction GN_START, what does it mean?

Hi Experts,
One of the manual configurations in SRM-ERP integration using configuration wizard is to execute GN_START transaction in SRM. What is the consequence of it? what will happen if i execute txcode GN_START in my SRM System? When i tried to check it in srm system, it prompted me like this
The program can be directly started or scheduled
as a background job that starts immediately. You
should run the program in a background job
because background processes are not subject to
the restrictions of dialog processes.
Please choose the type
PLease give advice. Thank you!
Regards,
Tony

Creating an iTunes store/iBookstore/Mac App Store account without a credit card
Follow the instructions carefully and to the letter.

Similar Messages

HT1420 Hi all, when I try to purchase items in a game on my iPad it comes up with a message saying contact iTunes support to complete this transaction? What does this mean and why is it doing this?

Hi all, when I try to purchase items in a game on my iPad it comes up with a message saying contact iTunes support to complete this transaction? What does this mean and why is it doing this?

It means exactly what it says:
Contact itunes support
It is saying this because you need to contact itunes support.
Have you considered doing what it told you to do? contact itunes support

What does this mean and how do I fix it? Error ITMS-9000 "Invalid Code Signing The executable ´viwer.app/ viewer´ must be signed with the certificate that is contained in the provisioning profile"

What does this mean and how do I fix it? Error ITMS-9000 "Invalid Code Signing The executable ´viwer.app/ viewer´ must be signed with the certificate that is contained in the provisioning profile"

If you had Firefox save your Yahoo password, first try deleting that here:
orange Firefox button ''or'' classic Tools menu > Options > Security > "Saved Passwords"
The "signed out" message seems to be related to how Yahoo authenticates you. Some users have reported that disabling automatic proxy detection solves the problem, and it also resolves an issue of getting logged out every few minutes, if you have ever experienced that.
To make the change:
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "Network" mini-tab, click the "Settings" button, then choose "No Proxy" and OK your way back out.
If your work connection requires you to use a proxy server, try the "Use system settings" option instead.
Does that help?

When i want to create my apple ID without credit card (while the none button is on), the message "contact itunes support to complete this transaction" is showing. what does it mean and what should i do to create my apple ID?

when i want to create my apple ID without credit card (while the none button is on), the message "contact itunes support to complete this transaction" is showing at the last step. what does it mean and what should i do to create my apple ID?

Creating an iTunes store/iBookstore/Mac App Store account without a credit card
Follow the instructions carefully and to the letter.

Transport Request Number - Object Status is LOCKED. What does it mean?

Hi Friends,
When checking in SE09 transaction my TR number "Object Status" is showing as LOCKED.
What does it mean
Whether I can transport objects under this TR Number to Quality System?
Will it give any problem while transporting?
Regards,
Viji.

The main reason to lock the request is to avoid any duplications.
You can also unlock the request if you want using SE03 transaction.
Goto SE03 transaction,select unlock objects and execute.give your
request number and execute.it will be unlocked.

Unicode convertible, what does it mean?

TYPES: BEGIN OF zbficheentry_list2,
FICHENO type zbficheentry-ficheno,
LOGISTICSCENTER type zbficheentry-logisticscenter,
KANTARNO type zbficheentry-kantarno,
TRDATE type zbficheentry-trdate,
TRHOUR type zbficheentry-trhour, line_color(4) type c,
END OF zbficheentry_list2.
DATA: zbficheentry_list TYPE STANDARD TABLE OF zbficheentry_list2 WITH HEADER LINE,
      wa_ficheentry TYPE zbficheentry_list2.
The program triggers the error:
The type of the database table and work area (or internal table)
"WA_FICHEENTRY" are not Unicode-convertible . . . . . . . . . .
What does this mean?
Please help.
Thanks.

Hello,
U have to use like this :
DATA: zbficheentry_list TYPE STANDARD TABLE OF zbficheentry_list2 WITH HEADER LINE,
wa_ficheentry TYPE line of zbficheentry_list2.
<b>WHAT is UNICODE ?</b>
About brief idea about unicode
In the past, SAP developers used various codes to encode characters of different alphabets, for example, ASCII, EBCDI, or double-byte code pages.
ASCII (American Standard Code for Information Interchange) encodes each character using 1 byte = 8 bit. This makes it possible to represent a maximum of 28 = 256 characters to which the combinations [00000000, 11111111] are assigned. Common code pages are, for example, ISO88591 for West European or ISO88595 for Cyrillic fonts.
EBCDI (Extended Binary Coded Decimal Interchange) also uses 1 byte to encode each character, which again makes it possible to represent 256 characters. EBCDIC 0697/0500 is an old IBM format that is used on AS/400 machines for West European fonts, for example.
Double-byte code pages require 1 or 2 bytes for each character. This allows you to form 216 = 65536 combinations where usually only 10,000 - 15,000 characters are used. Double-byte code pages are, for example, SJIS for Japanese and BIG5 for traditional Chinese.
Using these character sets, you can account for each language relevant to the SAP System. However, problems occur if you want to merge texts from different incompatible character sets in a central system. Equally, exchanging data between systems with incompatible character sets can result in unprecedented situations.
One solution to this problem is to use a code comprising all characters used on earth. This code is called Unicode (ISO/IEC 10646) and consists of at least 16 bit = 2 bytes, alternatively of 32 bit = 4 bytes per character. Although the conversion effort for the R/3 kernel and applications is considerable, the migration to Unicode provides great benefits in the long run:
The Internet and consequently also mySAP.com are entirely based on Unicode, which thus is a basic requirement for international competitiveness.
Unicode allows all R/3 users to install a central R/3 System that covers all business processes worldwide.
Companies using different distributed systems frequently want to aggregate their worldwide corporate data. Without Unicode, they would be able to do this only to a limited degree.
With Unicode, you can use multiple languages simultaneously at a single frontend computer.
Unicode is required for cross-application data exchange without loss of data due to incompatible character sets. One way to present documents in the World Wide Web (www) is XML, for example.
ABAP programs must be modified wherever an explicit or implicit assumption is made with regard to the internal length of a character. As a result, a new level of abstraction is reached which makes it possible to run one and the same program both in conventional and in Unicode systems. In addition, if new characters are added to the Unicode character set, SAP can decide whether to represent these characters internally using 2 or 4 bytes.
A Unicode-enabled ABAP program (UP) is a program in which all Unicode checks are effective. Such a program returns the same results in a non-Unicode system (NUS) as in a Unicode system (US). In order to perform the relevant syntax checks, you must activate the Unicode flag in the screens of the program and class attributes.
In a US, you can only execute programs for which the Unicode flag is set. In future, the Unicode flag must be set for all SAP programs to enable them to run on a US. If the Unicode flag is set for a program, the syntax is checked and the program executed according to the rules described in this document, regardless of whether the system is a US or an NUS. From now on, the Unicode flag must be set for all new programs and classes that are created.
If the Unicode flag is not set, a program can only be executed in an NUS. The syntactical and semantic changes described below do not apply to such programs. However, you can use all language extensions that have been introduced in the process of the conversion to Unicode.
As a result of the modifications and restrictions associated with the Unicode flag, programs are executed in both Unicode and non-Unicode systems with the same semantics to a large degree. In rare cases, however, differences may occur. Programs that are designed to run on both systems therefore need to be tested on both platforms.
You can also check out these official SAP locations on the SAP Service Marketplace:
http://service.sap.com/unicode
http://service.sap.com/unicode@SAP
http://service.sap.com/i18n
Regards,
Deepu.K

What does it mean by deleting the Content of the setup table when LO cockpi

Hi all:
what does it mean by deleting the Content of the setup table when LO cockpit ? why should we do it? why set up tables ?
Thank you very much!!!
Edited by: jingying Sony on Jun 7, 2009 4:46 AM

Hi Jingying Soni,
Data sources in LO cockpit have a seperate exctraction source during full update mode and delta update mode.
During delta update mode(when an transaction is posted in any particular application - like SD - sales orderm delivery) data is posted in application tables and updated alongside to the update table/extraction queue.
From the extraction queue this data is further transfered to the delta queue using periodic background jobs.The data is then upladed in BW. The delta lad always reads data from this delta queue.
However, when a full load is requested from the BW, the data is sourced by the set up table of the corresponding application.
The setup table is loaded/initalized first. In this initialization process , it reads data frm the corresponding application tables and stores it within this table. Later BW reads from this set up table whenever full/initial load is requested.
The process of filling set up able before full load request frrom BW is called set up run.
Before you run a set up to fill the set up tables you need to check that the set up table is empty.
If it is still containing data that was previously loaded in some other set up run. This data will als get loaded in BW unitinetionally/accidentally.
So, you need to ensure that you only get the intended data in BW. This can be done by proper selections to transfer data from application tale to set up table and from setup table to BW.
Along with this you hae to ensure that the set up table is either empty or you are using a disparate selection in the set up run and BW load which does not overlap with the previous set up runs data.
Hope it helps,
Best regards,
Sunmit.

When I start to download Firefox, I get a message that says "This type of file can harm your computer. Do yiu want to keep Firefox...p7.0.1.exe anyway? What does that mean and in what way can it harm my computer? Do I download it anyway?

When I start to download Firefox, I get a message that says "This type of file can harm your computer. Do yiu want to keep Firefox...p7.0.1.exe anyway? What does that mean and in what way can it harm my computer? Do I download it anyway?

You get that message any time you download an executable file. It is safe to open as long as you download from http://www.mozilla.org/en-US/firefox/new/

To be distributed set to Forbidden. What does it mean?

Hi all,
Under transaction SPRO select: SAP Solution Manager -> Configuration -> Scenario-Specific Settings -> Service Desk -> Service Desk -> Status Profile -> Change Status Profile for User Status
Double click on either SLFN0001 or ZLFN0001 if you have created it in your system.
Double click on any Status Profile.
At this point you will see the u201CChange Status Profile: Transaction Controlu201D screen.
In the Transaction Control table under column u201CBusiness Transactionu201D there is a value called u201CTo be distributedu201D. Anybody can explain in simple words what are the consequences of selecting the column u201CForbiddenu201D for this row (u201CTo be distributedu201D)?
What does it mean to forbid the distributionu2026? I donu2019t understand.
What the SAP help says about the u201Cforbiddenu201D column is u201CIndicator specifying that the business transaction cannot be carried out if this status is active.u201Du2026 but still this is not very clear to me.
PLEASE HELP!!
Brodo
Edited by: Brodo Di Pollo on Oct 24, 2008 12:17 PM
Edited by: Brodo Di Pollo on Oct 27, 2008 11:28 AM
Edited by: Brodo Di Pollo on Oct 28, 2008 10:42 AM

Hello Brodo,
Refer to this thread:
Re: Service Desk Message Status 'Further Statuses'
Here you get to know what and why is the concept of distribution present in the solman system..
Now, setting the status to forbidden means that the relevant service desk message cannot never be distributed to other systems like ( An R3 or SRM or any other SAP system )....
Inspire ppl by rewarding !!
Regards,
Anand..

What does "wheel" mean for custom access

What does "wheel" mean when allowing custom access to a folder?

wheel= admin
In computing, the term wheel refers to a user account with a wheel bit, a system setting that provides additional special system privileges that empower a user to execute restricted commands that ordinary user accounts cannot access. The term is derived from the slang term big wheel, referring to a person with great power or influence. It was first used in this context with regard to the TENEX operating system, later distributed under the name TOPS-20 in the 1960s and early 1970s.
The term was adopted by Unix users in the 1980s, due to the movement of operating system developers and users from TENEX/TOPS-20 to Unix. Modern Unix implementations generally include a security protocol that requires a user be a member of the wheel user privileges group in order to gain superuser access to a machine by using the su command.

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7
I found the manual update, which worked!
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5595&fileID= 5604

Hi Barbara,
For failed 13.1.2 update error U44M1P7, Please refer to the solution mentioned in the following threads :
http://forums.adobe.com/message/5396792#5396792
http://forums.adobe.com/message/5409050#5409050

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Try the troubleshooting for that error code on this page : iTunes: Advanced iTunes Store troubleshooting - Apple Support (search for '8003' on the page, it's just below half-way down)

GetResponseCode() returns -1,what does it mean

Hi ,
The HttpURLConnection class's getResponseCode() method returns -1.
getResponseMessage() returns null.i m accessing my servlet through a proxy.i know only about 1xx to 5xx codes.i dont know what does it mean by -1.But at server side the request is properly sent and processed and i m getting 200 and ok after processing at serverside. the object is sent to client also. but it is not received by the client.
Null object is returned.I think proxy is the culprit.If anyone can help me what -1 means,it will be really greatfull to diagnoise my issue in detail and solve my problem soon.
Your help will be greatfull.
Thanks
prakash

As it says perfectly clearly, right there in the API documentation for the method:
"Returns -1 if no code can be discerned from the response (i.e., the response is not valid HTTP)."

Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367

HT1657 I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

See this previous discussion:
https://discussions.apple.com/message/16962474#16962474

Executing Transaction GN_START, what does it mean?

Similar Messages

Maybe you are looking for