Execution error in report

Hi,
I have Total liabilities and Equity(new formula) in rows and closing balance(CKF).
When i execute this it is giving the following the error. how to rectify this one?
Diagnosis
Additional elements are added to the item Total Liabilities and Equity / Closing Balance that do not have the same dimension, for example, quantities and amounts or amounts and ratios.
Procedure
Check your definition.
If you the addition is still meaningful, you can hide the dimensionality of one or both partial outputs with the operator 'NODIM'. The system then understands this partial output as a dimensionless number.
Thanks,
pooja

Well Pooja,
This basically happens when you try to do a calculation not keepin in mind the units of the key figures used.
This could be one of the case or
Just have alook on your CKF I think your CKF unit is not correct.Make sure that key figures used for the calcul;ation for closing balance have the same units or make them nodim.
Make sure the outcome of the CKF matches with the key figure defintion.
Also It could be the issue with the formula for equity just check it once.
If it is a division then make sure both dividend and divisor are of same unit else make both of them as NODIM.
If helpful do reply
Thanks

Similar Messages

Report painter execution error - KH014 "Report does not exist".

Hi All,
I customized one report in FSI3 and used SE43 to create a t code for this report. In the development system, report will be executable from this t code.
Transport requests are successfully transported from development to production without any error. But on production when I tried to execute the report, I am getting the error KH014 - "Report does not exist".
While checking in production I found that the report was missing from report tree in FSI3 and as a result the customized report cannot be executed. As per basis guys there was not a issue in request transportation.
Has anyone encountered similar problem? How was it resolved?
Thanks.
Prashant

Hi Mikko,
Thanks for your reply but your solution is not working.
Hi Stacy,
I can execute the report from t codes like FSI3 & FSI0 in development.
I used SE43 for t code creation. At the time of t code creation there is a option called "Drilldown" under Report type heading, In drilldown option I selected my report from report type 002 (Financial Statement Key Figure) and created the t code. After this I transported both the request to production server.
Please let me know if this is wrong method or there is any other option to transport this report in Production.
Thanks & Regards,
Prashant

"Report Designer" Execution Error

Hi Gurus...
client is using SAP GUI 710 version. while executing the report using "Report Designer".
we are getting an error, "This report web Itemcan display reports with versionnumber 2.1 or lower. this report has version number 2.2" To display this report, use a newer version of the report web Item"
this is the error, <removed by moderator>
Cheers
Edited by: Siegfried Szameitat on Jan 19, 2009 12:48 PM

Unable to see Hierarchies in report designer?
cheers

Server Error in '/Report Manager' Application: System.IO.IOException: The file exists. When trying to export a completed report.

I am using SQL Server 2005. I run a report which runs and renders perfectly. But I am unable to export it into any format. It fails with the following error:
Server Error in '/Reports' Application.
The file exists.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.IOException: The file exists.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[IOException: The file exists.
Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) +489
Microsoft.Reporting.WebForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) +924
Microsoft.Reporting.WebForms.ServerReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileExtension) +84
Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +153
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +75
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
I have seen this question asked several years ago, but have never seen a response that suggests what the issue may be.
I would really appreciate any help in resolving this problem.\
The application has been running from quite some time and this problem started just recently.
Thank You.
-Rick

Hi Rick,
According to your description, the exception “System.IO.IOException: The file exists.” is thrown out when you export the report on report manager.
Generally, the exception is thrown out because there are more than 65535 files without deleting previous temporary files in our temporary directory. Based on my research, it has reported the same issue when exporting the report on report manager, and deleting all
temp files from C:\Windows\Temp could resolve the issue. I would also suggest you remove the temporary files from C:\Users\<username>\AppData\Local\Temp. Please refer to the first comment at this link:
System.IO.IOException: The file exists
Reference:
Path.GetTempFileName Method
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Error Accessing Report in SharePoint Integrated Mode (SQL Server 2008 with SharePoint 2007)

I have installed reporting services with SharePoint Integration Mode, however, whenever I access the report, below error occurs:
Report Server has encountered a SharePoint error. (rsSharePointError)
Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))
Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION)
Checking through the Log Files, there is more detailed error message, but not sure what cause the error:
library!ReportServer_0-2!4064!11/01/2010-15:00:39:: Call to GetPermissionsAction(http://[servername]/sites/Reporting/Reports/TestReport.rdl).
library!ReportServer_0-2!4170!11/01/2010-15:00:39:: Call to ListParentsAction(http://[servername]/sites/Reporting/Reports/TestReport.rdl).
library!ReportServer_0-2!4170!11/01/2010-15:00:40:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> Microsoft.SharePoint.SPException: Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION)) --->
System.Runtime.InteropServices.COMException (0x80020009): Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))
   at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   --- End of inner exception stack trace ---
   at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   at Microsoft.SharePoint.SPFile.GetFileContent(SPOpenBinaryOptions openOptions)
   at Microsoft.SharePoint.SPFile.OpenBinary(SPOpenBinaryOptions openOptions)
   at Microsoft.SharePoint.SPFile.OpenBinary()
   at Microsoft.ReportingServices.SharePoint.Server.SharePointServiceHelper.SyncToRSCatalog(String path, Boolean createOnly)
   --- End of inner exception stack trace ---
library!ReportServer_0-2!4064!11/01/2010-15:00:40:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> Microsoft.SharePoint.SPException: Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION)) --->
System.Runtime.InteropServices.COMException (0x80020009): Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))
   at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   --- End of inner exception stack trace ---
   at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   at Microsoft.SharePoint.SPFile.GetFileContent(SPOpenBinaryOptions openOptions)
   at Microsoft.SharePoint.SPFile.OpenBinary(SPOpenBinaryOptions openOptions)
   at Microsoft.SharePoint.SPFile.OpenBinary()
   at Microsoft.ReportingServices.SharePoint.Server.SharePointServiceHelper.SyncToRSCatalog(String path, Boolean createOnly)
   --- End of inner exception stack trace ---
Any idea on how to resolve the issue?

Hi Jin Chen,
Thank you for your response. I have disabled all the Symantec End Point Protection Service, but problem persists..
Further, I have checked through the ULS Log in SharePoint, there is more error reported there:
11/03/2010 15:19:48.44 ReportingServicesService.exe (0x3510)
0x4064
Windows SharePoint Services Database
6f8g Unexpected
Unexpected query execution failure, error code 282. Additional error information from SQL Server is included below. "The 'proc_GetTpWebMetaDataAndListMetaData' procedure attempted to return a status of NULL, which is not allowed. A status of 0 will be
returned instead." Query text (if available): "{?=call proc_GetTpWebMetaDataAndListMetaData(?,'F77D6A37-F8D2-492C-911C-923C8A135DEB',?,NULL,1,?,?,6187)}"
11/03/2010 15:19:51.46 ReportingServicesService.exe (0x3510)
0x4064
Windows SharePoint Services General
8e2s Medium
Unknown SPRequest error occurred. More information: 0x80020009
11/03/2010 15:19:51.69 ReportingServicesService.exe (0x3510)
0x1EEC
Windows SharePoint Services General
8e2s Medium
Unknown SPRequest error occurred. More information: 0x80020009
Do you have any idea based on the error above?

How to capture the first execution of a report

Hi,
I am executing a report in background. The first time the report is executed I have to do a different processing. After the 1st execution I have to different processing.
Someone please tell me how to capture the 1st execution of a report. Is there a system variable ?
Appreciate your <removed by moderator> response.
Thanks,
Dikshitha G
Edited by: Thomas Zloch on May 12, 2011 11:36 AM

Keshav.T wrote:
Are you going to create a Z table for this ???? ... Is there nobody to advice you in your firm ???
Hello Keshav,
A couple of years ago i would have recommended using the INDX table, but it has got it's demerits.
Maintenance of Z-table is easier than the INDX table. Say there is some error in the program & you want to override the flag. Will it be easier to do so in the INDX table or via SM30 for the Z-Table?
As a matter-of-fact i will recommend using the solution provided by Florian the TVARVC technique.
1. Create a parameter(specific to your program) & transport it.(See the trxn STVARV)
2. In your program check the value of this param & set it accordingly.
Using TVARVC you will 2 birds with one stone:
1. You don't have to create a custom table.
2. Easy maintenance via STVARV trxn.
Hope you get the point!
Cheers,
Suhas
PS: In our system we have a Z-table designed specifically for this particular purpose. All the programs having this kind of requirement refer to this table.

Sequence of events execution in ABAP reports

can anyone explain me the Sequence of events execution in ABAP reports

Ámit Güjärgoüd wrote:
> search-before-post Event Must before any posting.Else <delete-after-input event triggered by moderator> would be trigger and thread may be going to Dump as well without ST22 information(What haapend,How to correct error) available
>
> Edited by: Ámit Güjärgoüd on Oct 7, 2008 7:42 AM
this looks perfect ABAP event sequence example.

Error in Reporting Tool : Resource Staistics Report

Hi All,
I have a problem in KM Reporting section.I have been trying for a long time but couldnt arrive at the soln.
Resource Statistics Report :
I create an instant report by clicking on the start button and configure the necessary
details such as Scope [Location of the resources] and other necessary parameters.
After entering all the details, i click on "start" button to begin the Resource Statistics report. The main page of the Resource Statistics Report displays status of the current
report as running.
Here comes the issue..
When i click on the link of the report created instantly, it says "Item not found"
Item not found
/reporting/reports/Content Management/Tools/resource.statistics/1136468617109.xml
The item you are attempting to access is not available. Check that the name or link is correct. You might also check whether the associated repository is currently accessible.
If i refresh the page , the report itself is missing.
Note: If i dont select "List Matching Items " in the parameter list of the report, it gives me a report without listing items.
The same case applies for other reports like "Approval Maintenance Report".
Kindly help.
Thanks in advance,
venkat.

Hi Detlev,
Thanks for your reply.
I am in KMC SP12..
I am doubting whether it would be an installation issue or so..
However i cannot confirm with the same because Time Based Publishing Report is working fine.
For your info:
List of Reports -
Status
Resource Statistics :Item Not found /Report missing
Approval Maintenance:Item Not found /Report missing
Time Based Publishing: Working Fine
Resource Lock Report : Item Not found /Report missing
Virus Scan Report : Error in Execution
Portal Activity Report : Inappropriate result or "0" items found
Kindly Help.
Thanks in advance,
venkat.
Message was edited by: venkat ramana

Job Error Diagnostic Report

Hi,
The OWB 10R2 user guide says that
"This (Job Error Diagnostic Report) execution report (sometimes also referred to as the Run Error Diagnostic Report) shows basic details of runtime error, shows target details, and lists source and target column details, where possible. Note that some column values are displayed only when your role has appropriate privilege Within this report, you can sort column details on source/target category,source/target name,rowkey,column name."
I was unable to locate this report in the repository browser. I had logged in as the repository owner.
Could some please guide me on how to access this report, and also which runtime audit views does it pick up the data from?
Thanks and Regards,
Amit

Hi All,
I got the problem when I execute the report by using OWB10GR2-Repository Browser, status of the report is 'Complete' and the result is nothing :
- I started OWB Browser listener
- then I run browser IE(Internet Explorer)
- Run Repository browser
- Start execute the Report
_ but....after I refresh for report list status, the status of report that I executed is 'Complete' and nothing the result however if I run it by usng OWB Design Centre (Windows) is OK and worked properly...
Any body can help me please....!!!, I'm so confuse~~~~~~~~~~
Thanks a lots

SSRS Report Manager does not open on Vista Business Edition machine - Server Error in '/Reports' Application

Hi
Thank you for your support.
I have a Vista laptop that cannot connect to Report Manager URL. Same Windows account on an XP machine works just fine.
Note: - Reporting Services is not installed on Vista machine , this is a client that connects to a SQL Server 2008 R2 and Reporting server instance.
On Vista workstation, I tried diabling UAC, tried Run As, added trusted sites, other browsers, IP/FQDN/name changes in URL. - no change.
Server Error in '/Reports' Application
Some or all identity references could not be translated.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
[IdentityNotMappedException: Some or all identity references could not be translated.]
System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)
System.Security.Principal.SecurityIdentifier.Translate(Type targetType)
System.Security.Principal.WindowsIdentity.GetName()
System.Security.Principal.WindowsIdentity.get_Name()
Microsoft.ReportingServices.UI.GlobalApp.Application_AuthenticateRequest(Object sender, EventArgs e)
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Macca

Hi Macca,
Per my understanding that you got the error message when access the report manager in the client vista machine which have't install the reporting services instance and access to the Windows XP machine works fine, right?
I assumed that you have installed the Reporting Services instance in this WIndows XP machine, Could you please check in the third machine with the vista os to see if you will got the same error message.
The issue can be caused by many factors:
If the third machine can connect to the report manager remotely, the issue can be caused by this vista machine.
Similar thread for your reference:
http://www.windows-tech.info/15/69e51d5566a67ef2.php
https://technet.microsoft.com/en-us/library/bb630430(v=sql.105).aspx
If the other machine also can't access the report manager, the issue caused by some configuration not correct for the remote connection(https://msdn.microsoft.com/en-us/library/ms156305.aspx)
If you are using Windows Vista or Windows Server 2008, you must configure Report Manager for local administration, please check to make sure the "Service Account" is the domain/user account which exists in the local administrator group.
Please check the rsreportserver.config file and make sure <RSWindowsNegotiate/> is the first value in <AuthenticationTypes> section. By default, the rsreportserver.config file is located in the path like: C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting
Services\ReportServer
Similar thread for your reference:
Reporting Services 2008 Web Service URL - Access Denied error
http://www.sqlservercentral.com/Forums/Topic697167-146-1.aspx
If your problem, still exists, please try to provide more details information in the log file which path is: C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles
Any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Error in report generation-Load report failed

I have installed crystal reports for VS2005 runtime in my live environment.When i try to load the report file from a .Net page i am getting the error'Error in Report generation-Load report failed'.
This works fine in development and testing but when moved to production we are having issues.
I believe i have a workaround i.e i need to open the rpt in a VS 2005 environment and re-write the connection string again.This fix had worked in development and testing when we had the same issue.
But not sure if this is a known issue with crystal reports and if so do we have any hot fixes for the same.
Please help.

Hi Don,
The reason why i posted the item on 'data Connectivity issues' is because i suspect the problem is with the connection string.Though i had provided the correct connection string,re-writing the connection string with the same info might help to fix the issue with loading the report.
Does it mean that there is a problem in the connectivity?
I have a risk here that i cant re-write the connection string..i.e to open the RPT file in VS2005 and bind it.The production web server & database server sits in a third party environment and it is not in the company network.So i cant connect to this server to re-write from any other severs in the network.
Is there any fix which can applied to the server to get this issue resolved?
Cheers
Nithya.

Error from reports from ZAM(Graph or PDF) - File does not begin with '%PDF-'.

I just noticed today that any Graph or PDF report I try to view I get the
following error - Error from reports from ZAM - File does not begin with
'%PDF-'. I tried to just save the file and then open it, but get the same
error. I can open other pdf files I have downloaded from other sites ok.
Anyone have any idea? I haven't done anything to that server that I am
aware of in quite a while.
Thanks
Bill

I took a closer look at the files it downloaded, opened them with notepad,
haer is what it says:
XSL Transform or subsequent processing failedThe document has no pages.
"Bill" <[email protected]> wrote in message
news:2bBtk.2164$[email protected]..
>I just noticed today that any Graph or PDF report I try to view I get the
>following error - Error from reports from ZAM - File does not begin with
>'%PDF-'. I tried to just save the file and then open it, but get the same
>error. I can open other pdf files I have downloaded from other sites ok.
>Anyone have any idea? I haven't done anything to that server that I am
>aware of in quite a while.
>
> Thanks
>
> Bill
>

Restricting the pl/sql error in report region(sql report)

Hi,
Is there any way to hiding pl/sql error in report region when we use generic column names*(Use Generic Column Names (parse query at runtime only)*
). and type is sql query else displaying alternative error message on that particular report region
I am using apex 4.1 and 11g database
Thanks
Sagar.

What kind of pl/sql error you are talking about?

Error is "Report Contents No data

error is "Report Contents No data

Hi Godavari,
Firstly, make sure there are some events happened in the day you selected and mathcing with the options you set.
I could reproduce your issue if I don't do any events in the day I set in the custom report.
So, please try to do some actions based on the options in the custom report you set, then go to Audit log report to run a custom report based on the current day, compare the result.
Note: Audit log reports only log the events which are happened after you enable Audit log reports.
If the report still doesn't contain data, please check the log file to find more information base on the Correlation ID.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

BI Publisher - PO_DISPATCH Error generating report output

Hi everyone,
Sorry for my bad english... having said that...
I need to modify the Purchase Order print. First, I wanted to see the standard version to get an idea of how much different it was. Well, I don't know because it doesn't work.
Error:
Error generating report output: (235,2309)
Error occurred during the process of generating the output file from template file, XML data file, and translation XLIFF file.
I know there are several topics on the web, but all of them are about new or custom reports, this is a standard one. When I preview the report on the report definition it works fine, so I assume there's a problem with the XML file generated. When I preview the report specifying an alternative XML I get the same error. The XML file I choose was the one generated by PeopleSoft when trying to view the printable version of the PO online.
So, I start cutting portions of the XML File. I started leaving only de Header Data and it works OK, when I add the Lines it failed. I add the Line Fields one by one to detect what was the problem... And finally it failed when I add AMT_LINE_MAX. Why? No idea, is it because its value is '0,000' instead of '0.000'? I don't think that should be the problem since there are other numeric fields on the header, all with ',' as a decimal separator...
Am I missing some configuration?
Thanks in advance.
Regards,
Veronica.

Have a look at the following doc:
"Error generating report output. (235,2309)" When Running the "PO XMLP Dispatch" XML Publisher Report (PO_DISPATCH) for a Purchase Order with a Ship To Location with Special Characters in the Address [ID 1299876.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=1299876.1
Stating this happens for example when there is a location with special characters.

Execution error in report

Similar Messages

Maybe you are looking for