Execution of BBPGETVD is not defined in this system

Hi,
When I run BBPGETVD and the system prompt "Execution of BBPGETVD is not defined in this system".
Please tell me what is wrong.
Thank you.
Regards,
Henry

Hello Henry,
If it is a One Client Scenario the BBPGETVD transaction will not work. You will require to use MDS_LOAD_COCKPIT for vendor replication for the same.
Regards,
Sapna

Similar Messages

  • Debliery Units : VENDOR IS NOT DEFINED FOR THIS SYSTEM

    Dear Experts,
    In prespective modeler , tried creating 'DELIVERY UNITS'. However get error message
    "CANNOT CREATE DELIVERY UNIT AS CONTENT VENDOR IS NOT DEFINED FOR THIS SYSTEM" ?
    How can we maintain CONTENT VENDOR ? we are using in-house HANA installation.
    Regards
    Prashant

    Hi Shrikant,
    Please do not reply with your same question in all of the threads which are answered.
    What is the version you are using?
    Where exactly you are unable to see?
    Once you edited the field as mentioned by Jody, it will be in green circle. Also while creating the package, you can see this DU as shown below:
    Regards
    Raj

  • Item category RENN is not defined for this item

    Hey SD experts,
    I've created a sales order with free of charge and standard items.
    Now, I'm trying to create a return order with reference to this sales order.
    I got this error message: Item category RENN is not defined for this item.
    I've checked in VOV4 : the combination Sales document type + Itemcategory group =>Itemcategory seems to be correct.
    Why am I getting this error message then ?
    Regards,
    Bahia.

    Dear Bahia,
    Check item level copy control settings between Sales order free of charge and Return sales order i.e copy control settings between free of charge order item category and returns order itemcategory.
    Once again check item category determination through VOV4 transaction for the combination of
    Your returns order document type+Itemcategory group-->RENN.
    I hope this will help you,
    Regards,
    Murali.

  • Is not defined in this session

    SELECT cycle_flag, sequence_name FROM ALL_SEQUENCES
    I picked 'record_SEQ' sequence from the listing.
    select record_SEQ.Currval from dual; ==> ORA-08002: sequence record_SEQ.Currval is not defined in this session.
    where is the problem ?

    As per the link you posted it says , this error comes up when there is no value >...but I can see the last value in the sequence is 20632 (using TOAD's sequence tab and highlight the particular sequence).
    So, This error is confusing
    Total Questions: 3 (3 unresolved) ?????one answered and Marked as answered.
    Edited by: user575089 on Dec 23, 2009 12:47 AM

  • Err in PO creation-Sales document item is not defined for this transaction

    Dear Consultants the errror  occurs when we process  Individual Purchase Order scenario.
    Err in PO creation-Sales document item is not defined for this transaction  
    Thanks&Regards,
    SanthaRam

    This error because the item category is not determined correctly in the sales order.
    Check the item category in Sales order line item, for Individual Purchase order scenario its TAB.
    If its not TAB, then check the assignement for Item category in VOV4.
    This thread is more of the SD part, so also put it in SD forum for better solutions.
    Regards,
    Sheetal

  • Class type not defined for this object type

    Hi Friends,
    Could u please guide me ?..We have a requirement to extract some data from classification system.
    This is related with class type 023 - Batch
    I want to use the following parameters in CTBW.
    basis datasource :Z_BATCH_ATTR
    class type : 023
    object table :MCHA
    Datasource type : ATTR
    I am getting an error "Class type not defined for this object type" when i enter the above entries in CTBW.
    The only way I'm being able to make this work is changing object table from MCHA to MCH1.
    This solution does not fit me bacause MCH1 table dont have Plant as Key, and I need it.
    Do you know what should I do to solve this?
    Thanks in advance

    Hi,
    I believe we have to use the list of standard "Basis DataSource", as I'm also stuck with the same issue. Let me know what Basis Data source you selected in this case.
    As I'm trying to extract Batch attributes from "AUSP" Table.
    I have given class type= 023
    Obj Table= AUSP
    But not sure which "basis datasource" I need to select.
    Thanks,
    Satish

  • Cbs build portal application dc fail.  Build Plugin IS NOT DEFINED for this

    hi all
    I use NW7.0 ehp1,have portal and a nwdi.
    I create a track at nwdi . and develop a portal application .
    local build is ok . but when i check in .run a activitce.  dc is broken.
    log is -
    CBS Request Log - [  300/DEP_PESKM_D  ]
    Build number assigned: 314
    Change request state from QUEUED to PROCESSING
    REQUEST PROCESSING started at 2010-11-05 02:17:38.921 GMT
        ACTIVATION request in Build Space "DEP_PESKM_D" at Node ID: 13,975,650
         [id: 300; parentID: 0; type: 4]
         [options: NO OPTIONS]
        Waiting for access: 79 ms
        ===== Pre-Processing =====  started at 2010-11-05 02:17:39.000 GMT
            List of requested for activation activities:
                'deep.com_PESKM_1' compartment
                    tet
                        [ISN 111][created by YANLIANG at 2010-11-05 10:17:31.0][OID 6b2f604ae87c11df94ff000000d54062]
                There is 1 activity in compartment deep.com_PESKM_1
                1 activity will be processed by this request
            Analyze dependencies to predecessor activities... started at 2010-11-05 02:17:39.031 GMT
                Analyzing predecessors in compartment "deep.com_PESKM_1"
                    No dependencies to predecessor activities found.
            Analyze dependencies to predecessor activities... finished at 2010-11-05 02:17:39.046 GMT and took 15 ms
            Analyze versions... started at 2010-11-05 02:17:39.046 GMT
                List Active Versions Report: "HTTP/1.1 207 Multi-Status" finished at 2010-11-05 02:17:41.812 GMT and took 2 s 766 ms
                Synchronize metadata for [deep.com.cn/dc_logo_par] started at 2010-11-05 02:17:41.812 GMT
                    Verification of DL [ws/PESKM/deep.com_PESKM/dev/active/] finished at 2010-11-05 02:17:41.906 GMT and took 0 ms
                    Verification of cache (level 2: Comparison of attributes) finished at 2010-11-05 02:17:41.937 GMT and took 31 ms
                Synchronize metadata for [deep.com.cn/dc_logo_par] finished at 2010-11-05 02:17:41.937 GMT and took 125 ms
                < CHANGE > 'deep.com.cn/dc_logo_par' DC
            Analyze versions... finished at 2010-11-05 02:17:41.937 GMT and took 2 s 891 ms
            Analyze activities... started at 2010-11-05 02:17:41.937 GMT
                Loading component definitions
                1 component to be build in compartment "deep.com_PESKM_1"
            Analyze activities... finished at 2010-11-05 02:17:42.000 GMT and took 63 ms
            Calculate all combinations of components and variants to be built...
            Analyze request DC BV... started at 2010-11-05 02:17:42.109 GMT
                    'deep.com.cn/dc_logo_par' variant 'default'
                    'deep.com.cn/dc_logo_par' variant 'default' cannot be built. ACTIVATION will fail.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
            Analyze request DC BV... finished at 2010-11-05 02:17:42.140 GMT and took 31 ms
        ===== Pre-Processing =====  finished at 2010-11-05 02:17:42.187 GMT and took 3 s 187 ms
        Change request state from PROCESSING to FAILED
        Error! The following problem(s) occurred  during request processing:
        Error! The following error occurred during request processing:Activation failed due to component "deep.com.cn/dc_logo_par" variant "default". The component is BROKEN.
    REQUEST PROCESSING finished at 2010-11-05 02:17:42.187 GMT and took 3 s 266 ms
    No build logs available for the request.
    Edited by: yan liang on Nov 5, 2010 3:12 AM

    Hi Yan,
    please check the NWDI troubleshooting guide:
    http://wiki.sdn.sap.com/wiki/display/TechTSG/%28NWDI%29%28CBS%29Q0030
    --> Understanding Broken and Dirty DCs
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b7c94e-fc6b-2910-30b8-d34a7b51309e
    Did you import the dependent build plugins for the track in question?
    (tab "development" in the /devinf --> CMS webui --> Transport studio)
    See also the sap note: #1080927 - Creating CMS Tracks for Common Application Types (http://service.sap.com/sap/support/notes/1080927)
    Best Regards,
    Ervin

  • Build Plugin IS NOT DEFINED for this component or the defined Build Plugin

    Hello,
    we have upgraded our NWDI (nw04s) to SP13 and to DB2 V.9. We don't know if this has something to do with our problem. The NWDS developers called us. They can't activate the changes anymore. When I check the CBS I can see, that all components are broken. Any idea?
    REgards,
    Alexander
    Build number assigned: 487
    Change request state from QUEUED to PROCESSING
    REQUEST PROCESSING started at 2007-10-10 10:46:13.526 GMT
        BUILD request in Build Space "NW1_GPMS_D" at Node ID: 27,972,750
         [id: 473; parentID: 0; type: 2]
        Waiting for access: 33 ms
        ===== Pre-Processing =====  started at 2007-10-10 10:46:13.559 GMT
            Calculate all combinations of components and variants to be built...
            Analyze request DC BV... started at 2007-10-10 10:46:13.702 GMT
                    'zurich.com/gpms/jco_pool' variant 'default'
                    'zurich.com/gpms/jco_pool' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/yea' variant 'default'
                    'zurich.com/gpms/yea' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/chgpwd' variant 'default'
                    'zurich.com/gpms/chgpwd' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/rep' variant 'default'
                    'zurich.com/gpms/rep' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/model' variant 'default'
                    'zurich.com/gpms/model' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/idp' variant 'default'
                    'zurich.com/gpms/idp' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/ovt' variant 'default'
                    'zurich.com/gpms/ovt' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/arch' variant 'default'
                    'zurich.com/gpms/arch' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/myr' variant 'default'
                    'zurich.com/gpms/myr' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/div' variant 'default'
                    'zurich.com/gpms/div' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/ume' variant 'default'
                    'zurich.com/gpms/ume' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/com' variant 'default'
                    'zurich.com/gpms/com' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/ovw' variant 'default'
                    'zurich.com/gpms/ovw' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/obj' variant 'default'
                    'zurich.com/gpms/obj' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/chgpwdb' variant 'default'
                    'zurich.com/gpms/chgpwdb' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/pdata' variant 'default'
                    'zurich.com/gpms/pdata' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
            Analyze request DC BV... finished at 2007-10-10 10:46:14.049 GMT and took 347 ms
            Prepare build environment in the file system... started at 2007-10-10 10:46:14.049 GMT
                Synchronize development configuration... started at 2007-10-10 10:46:14.049 GMT
                Synchronize development configuration... finished at 2007-10-10 10:46:14.068 GMT and took 19 ms
                Synchronize used libraries... started at 2007-10-10 10:46:14.068 GMT
                Synchronize used libraries... finished at 2007-10-10 10:46:14.068 GMT and took 0 ms
            Prepare build environment in the file system... finished at 2007-10-10 10:46:14.068 GMT and took 19 ms
        ===== Pre-Processing =====  finished at 2007-10-10 10:46:14.069 GMT and took 510 ms
        Waiting for access: 3 ms
        ===== Processing =====  started at 2007-10-10 10:46:14.072 GMT
            No Components to be built.
            BUILD DCs
        ===== Processing =====  finished at 2007-10-10 10:46:17.407 GMT and took 3 s 335 ms
        ===== Post-Processing =====
        Waiting for access: 5 ms
        ===== Post-Processing =====  started at 2007-10-10 10:46:17.412 GMT
            STORE build results... started at 2007-10-10 10:46:17.413 GMT
                "zurich.com/gpms/jco_pool" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/jco_pool": store meta-data
                "zurich.com/gpms/jco_pool" in "default" variant  is PROCESSED
                "zurich.com/gpms/yea" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/yea": store meta-data
                "zurich.com/gpms/yea" in "default" variant  is PROCESSED
                "zurich.com/gpms/chgpwd" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/chgpwd": store meta-data
                "zurich.com/gpms/chgpwd" in "default" variant  is PROCESSED
                "zurich.com/gpms/rep" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/rep": store meta-data
                "zurich.com/gpms/rep" in "default" variant  is PROCESSED
                "zurich.com/gpms/model" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/model": store meta-data
                "zurich.com/gpms/model" in "default" variant  is PROCESSED
                "zurich.com/gpms/idp" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/idp": store meta-data
                "zurich.com/gpms/idp" in "default" variant  is PROCESSED
                "zurich.com/gpms/ovt" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/ovt": store meta-data
                "zurich.com/gpms/ovt" in "default" variant  is PROCESSED
                "zurich.com/gpms/arch" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/arch": store meta-data
                "zurich.com/gpms/arch" in "default" variant  is PROCESSED
                "zurich.com/gpms/myr" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/myr": store meta-data
                "zurich.com/gpms/myr" in "default" variant  is PROCESSED
                "zurich.com/gpms/div" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/div": store meta-data
                "zurich.com/gpms/div" in "default" variant  is PROCESSED
                "zurich.com/gpms/ume" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/ume": store meta-data
                "zurich.com/gpms/ume" in "default" variant  is PROCESSED
                "zurich.com/gpms/com" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/com": store meta-data
                "zurich.com/gpms/com" in "default" variant  is PROCESSED
                "zurich.com/gpms/ovw" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/ovw": store meta-data
                "zurich.com/gpms/ovw" in "default" variant  is PROCESSED
                "zurich.com/gpms/obj" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/obj": store meta-data
                "zurich.com/gpms/obj" in "default" variant  is PROCESSED
                "zurich.com/gpms/chgpwdb" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/chgpwdb": store meta-data
                "zurich.com/gpms/chgpwdb" in "default" variant  is PROCESSED
                "zurich.com/gpms/pdata" in "default" variant  is BROKEN. No build results to store.
                "zurich.com/gpms/pdata": store meta-data
                "zurich.com/gpms/pdata" in "default" variant  is PROCESSED
            STORE build results... finished at 2007-10-10 10:46:17.440 GMT and took 27 ms
            Change request state from PROCESSING to SUCCEEDED
            Analyze effect of applied changes to buildspace state... started at 2007-10-10 10:46:17.440 GMT
                Skip check for build time dependency cycles. DC metadata is not changed.
                Determine components that have become DIRTY due to the results of this request started at 2007-10-10 10:46:18.601 GMT
                    No such components have been found.
                Determine components that have become DIRTY due to the results of this request finished at 2007-10-10 10:46:18.602 GMT and took 1 ms
                No Internal Build Requests are canceled by this request
            Analyze effect of applied changes to buildspace state... finished at 2007-10-10 10:46:18.642 GMT and took 1 s 202 ms
            Request SUCCEEDED
        ===== Post-Processing =====  finished at 2007-10-10 10:46:18.646 GMT and took 1 s 234 ms
    REQUEST PROCESSING finished at 2007-10-10 10:46:18.646 GMT and took 5 s 120 ms
        ===== Pre-Processing =====  started at 2007-10-10 07:16:55.069 GMT
            Calculate all combinations of components and variants to be built...
            Analyze request DC BV... started at 2007-10-10 07:16:55.104 GMT
                    'zurich.com/gpms/jco_pool' variant 'default'
                    'zurich.com/gpms/jco_pool' variant 'default' cannot be built and will be marked as BROKEN.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                    'zurich.com/gpms/yea' variant 'default'

    Here are some things to have a look at:
    - Check your SC definitions and their Usage Dependencies in the SLD
    - Check that the basis SCA's have been imported into the track. You can quickly see this by having a look at the total nr of DCs for these SCs in CBS.

  • Shipping Point is not defined for this transaction

    Dear All,
    I have a question in creating new shipping point.
    Scenario:
    1. Created new shipping point and assigned it to plant.
    2. Maintain Shipping Point determination.
    When ever create a sales order, when i enter the new shipping point I hit this error.
    "Shipping Point is not defined for this transaction". What else is there to check. Please advise.

    Hope you have done intial trouble shooting,
    i.e. Combination of Shipping Point Determination=
    Loading Group - (1-Material Master Record)
    Shipping COnditions (1- Sales doc type , 2- Customer Master Data - Sold to Party)
    Delivering Plant - (1-Customer Material Info record , 2- Customer Master Record & 3-material master record)
    if system finds the above combination, SHipping Point will be determined.
    I hope you have done Copy of existing Shipping Point & renamed it. Then all the shippig Point determination Combinations will be copied. if not, you have to maintain manually in Shipping point determination customization.
    re-check n revert

  • Message no. V1321 - Item category ALES is not defined for this item

    Hi,
    I am trying to use ALES - Item Category for creation of the Sales Order. But i am getting this eerror message as Item category ALES is not defined for this item. Please let me know the config changes that i need to do to use this Item Category.
    Thanks in Advance !!

    To maintain the item category for a sales order type first you have to assign the item category in SPRO.
    SPRO>Sales & Distribution>Sales>Sales Documents>Sales Document Item>Assign item categories.
    In the screen Change view Item category assignement:overview screen
    select your sales document type + ItemcategorygroupUsageHigherLevel Item category
    Then you have to maintain Default item category and Manual item category.
    Default item category will be proposed by the system when you enter a material in sales order. You can change the item category to any one of the manual item category maintained above.
    For e.g.: You are creating a thrid party sales order. Default item category is TAN, if manual item category is maintained as TAS for this combination of sales document type + ItemcategorygroupUsageHigherLevel Item category and then system will allow you to change item category to TAS. If this is not maintained then system will give you an error as"Item category TAS is not defined for this item".
    Again depending the item category further acitivites will be carried in SAP, like in third party item (TAS) PR screen will be displayed.
    Thanks,
    Sarvesh Desai
    Edited by: Sarvesh DeSai on Jan 11, 2012 7:08 AM

  • 'Item category SUBC is not defined for this item'

    Hi,
    When i tried to create an SO with item category SUBC, the system pop-up this error msg: 'Item cateogry SUBC is not defined for this item'
    Please let me know what should i do?  Thank you.
    I've maintained the item category assignment with same item category group maintained in material master data..But it still not work...

    Dear Laa,
    This is due to not done the itemcategory definition and determination.So
    First you define the itemcategory  SUBC through VOV7 transaction (By copying standard TAN)
    Then do the itemcategory determination through VOV4 transaction for this combination
    Sales document type+Itemcategory group--->Itemcategory
    Itemcategory group is different from itemcategory.
    Itemcategory group maintained in the Material master data
    The item categroy will get determine in the sales order based on Sales document type+Itemcategory group
    I hope this will help you,
    Regards,
    Murali.

  • Item category IRIN is not defined for this material

    Hi,
    When creating Sales Order, I assign a service material with Material Type DIEN , System gives me error as
    "Item category IRIN is not defined for this item."
    I want to know where and how is the link between Item Category and Material is maintained
    Thanks in advance.
    Regards,
    Nitin

    hi
    i am not a expert , based on my knowledge system will determine the item category for line item , based on  vov4 , here you will give the
    sales document typeitem category groupusage+higher level item= default item category
                  or                +            leis               +  sein  + enter over item= irin
    this is for determination ,
    in the material master  you will check the item category group , sale view tab 1, 2,  and also basic data.
    based on this will take , line item , item category . so sales view and basic data view item category group are same , other wise system sows this is error message ,
    please check this
    regards
    sankar

  • Info Source 80FIGL_O06 is not defined in source system

    Hi BW Experts,
    When I am trying load data from ODS to Cube, I am getting a error messgae stating:
    Info Source 80FIGL_O06 is not defined in source system
    Error in Source system
    This is an urgent issue. Please let me know if you have any suggestions...
    Regards,
    Reddy.

    You can do this 2 ways. Right click on the ODS and say generate export datasource. The datasource will start with 8... and you can find that under Datamarts in RSA1-> Infosource. You can then create an infopackage and load from ODS through the update rules. You have the option of full load or delta load.
    The other way you can go about this is again right click on the ODS and say update to data targets and just follow from there.
    Did you follow the above steps? Where exactly is your problem?

  • Infosource is not defined in source system.

    Hello Expert,
    We have problem on data upload. The Infosource is ODS object generated. Now through RSMO, message is:
    Infosource 8* is not defined in source system.
    How to re-define/active this type infosource? Is there any impacts?
    BTW, days ago, it ran very well.
    Thanks
    XY
    Edited by: xy chen on Nov 14, 2008 11:47 AM

    Hi,
    I am also facing the similar error, whne uploading data from an ODS to further data targets.
    I did follow th instructions advised, and I tried searching in the Service Market Place with the term,
    " " Infosource is not defined in source system " " but couldnot find any correction notes.
    Could you let me know the notes, you followed up to resolve this issue,
    Thanks in advance,
    Cheers,
    Neela

  • Encore CS5:  The software that's used to decode the media is not available on this system...

    Hi guys, I am needing assistance with this matter.  I have read up on similar threads (mostly commented on my Bill Hunt), but I fear I may be missing something.  Can anyboy please assist me?
    Here's the background:
    OS:  Windows 7 64-bit.
    Video footage format:  AVCHD 1440 X 1080 (1.333) 25fps, 48KHz
    Photoshop Images:  1440 X 1080 (1.333)
    I have been running CS4 Master collection for the past year and a half, with minimal hassles in encore (except for the early patch that needed to be downloaded and applied for some or other transcoding error in Encore CS4). 
    Right, so we bought the CS5 Master collection upgrade, and all applications are running great, except Encore.  The moment I have completed editing my hour-long video in Premiere Pro CS5, I "send to Encore" via Dynamic Link.  (This is the way I have been operating countless times in CS4.  However now, in Encore CS5, the programme opens with all the regular project settings and saving dialogues, but the the moment it looks as though Encore is going get going, it stalls and doesnt respond, forcing me to close and try again. 
    So I tried the other way around.  I restarted Encore, created a new project, in a new project folder, encore opens, and I chose to Import as "new timeline" selecting the Premiere project of choice.  This time around, i don't get a crash out of Encore, instead I get the following message:
    "The software that's used to decode the media is not available on this system. 
    Installing the correct decoders for the files you are working with may help to correct the problem."
    So I googled the matter, and came up with Bill's response to the same problem (expect the date that it was posted was back in 2009).  I am would desperately like to know if there is a solution, a patch, a workaround of some sorts that can help me get back to my usual workflow. I am pretty screwed without encore at this present moment, and the work is piling up.  Can anybody help?
    Many Thanks,
    Matt

    I am having the same problem however I end up having hardware error "Sense code 52102"
    My video capture is similar to yours except I am using HD (Canon HNV model Legria HV40)
    The process takes a long time and I have breaks in my recording to DVD and with no sound - once it completed after 40 hours.
    I have wasted over 20 DVD's trying different things.
    OS:  Windows 7 64-bit.
    Video footage format:  HD 1440 X 1080 (1.333) 25fps, 48KHz
    Photoshop Images:  1440 X 1080 (1.333)
    I have not tried what you did buy opening up Encore and importing to new timeline , let me do that and see if I get the same message.

Maybe you are looking for

  • How to use the sharing function with other pc on the Finder sidebar?

    I discver my housemates' pc's names under "sharing" on the Finder sidebar. We all use the same wifi network at home.  Neither they nor I have enabled anything so I'm just wondering what is that for and where am I able to control sharing options? Also

  • How can I delete temporary files in FF. This is very simple in IE but feature cannot be found in FF

    IE has a simple means to delete both cookies and temporary files. I can delete cookies in FF but there is no way found to delete temporary files. This is a design feature flaw I assume since I cannot imagine this feature is not in the design..just ca

  • Dynamic Filename Error

    Hi all, I have the requirement of getting same file name with timestamp on the receiver side (EX.Filename_timestamp) by modifying the Adapterspecific messageattributes refering the following blog Re: Regarding Target File name and wrote the code as s

  • Trying to update an old 2002 iMac - need help!

    I'm trying to update my ancient iMac to a newer operating system. I was hoping I could simply download my purchased copy of Mountain Lion onto this machine, but to my knowledge I cannot access the Mac App Store on this machine. Can someone give me a

  • HELP using advc-300 on old bad quality analog tapes

    ok here's my problem, this isn't directly a FCP question but i think you guys can help me out. I just bought an advc-300 hoping that I would be able to capture some very old 8mm tapes that have a lot of video noise and "fuzz" on them. I thought that