Execution of Reports phase error during SAP EHP4 upgrade with EHPi
I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
Victor
Hi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard
Similar Messages
-
PREPARE_XPRA phase error during ST-PI upgrade
Hi ,
While upgrading the ST-PI from 2005_1_620 to 2008_1_620 patch 5 we are getting the error in the phase PREPARE_XPRA. The error text as below.
Error in phase: PREPARE_XPRA
Reason for error: TP_BUFFER_INCONSISTENCY
Return code: 0008
Error message: Pkgs. in queue don"t exist in the tp buffer (e.g.
SAPKITLRB1)
I have manually added the transports to buffer and re-tried the step again but no use. I have deleted the entries marked with '?' in PAT01, PAT03 tables and retried but no use again. The same process was successful in development system but giving error while doing in acceptance. Please help me in resolving the error.
Regards,
AnupHi,
In Se37,Use the function module OCS_RESET_QUEUE -> Single Test with the parameters IV_TOOL=3DSAINT, IV_FORCE=3DX
Then delete all the files from \usr\sap\trans\tmp and make sure that there is no TP process process running in the system on OS level. If any process exist, please kill them.
Then restart the import and you should be good to proceed.
Also check if program RDDIMPDP and RDDNEWPP are scheduled and running.
Hope this helps.
Regards,
Varun -
Error during Java Stack upgrade with SAPINST Tool for Netweaver 04
Hi,
I have updated all the ABAP stack support packages fine. But when i try to upgrade the Java Stack for the BW server using the SAPINST tool, i received an error in the 17th step "Starting J2EE Engine".
The error log says:
CJS-20057 Starting Java engine DVEBMGS05 of SAP system <SID> failed:
after 165 seconds the state of the engine changed from "Starting" to "Stopped".
Please help.
Thanks
VijayHi Vijay,
Please check the link for some initial troubleshooting:
http://help.sap.com/saphelp_nw70/helpdata/en/69/430841a6e1ef6fe10000000a1550b0/frameset.htm
Regards,
Siddhesh -
Error during sap r/3 installation at update databse statistics
Hi friends,
I am getting an error during sap r/3 installation almost at the last stage.
the error is at update database statistics.
my configuration is
os: windows 2000 server.
d/b: oracle 9i.
erp: sap 4.7 ee
During oracle installation stage the oui is asking for create a database, i am chechking it ok. Is that a problem ?.
I am sending the log file. Please can anybody help me, where i am going wrong-
The log file----
Click Browse and give location of export1, as shown in the bellow figure
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata4\drs620_5.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata4\drs620_5 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata5\drs620_6.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata5\drs620_6 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata5\drs620_7.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata5\drs620_7 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drs620_8.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drs620_8 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drs620_9.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drs620_9 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drsusr_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drsusr_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata2\roll_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata2\roll_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata3\temp_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata3\temp_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata1\system_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata1\system_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-02-04 21:46:33
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2007-02-04 21:46:34
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-02-04 21:46:35
Creating file c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 21:46:36
Creating file C:\oracle\ora90\database\initDRS.sap.
INFO 2007-02-04 21:46:37
Copying file F:/sap4.7/ker/NT/COMMON/INSTALL/INITSID.DBA to: c:\oracle\ora90/database/initDRS.dba.
INFO 2007-02-04 21:46:37
Creating file c:\oracle\ora90\database\initDRS.dba.
INFO 2007-02-04 21:46:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:46:39
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-04 21:46:39
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 21:46:39
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-04 21:46:40
Creating file C:\SAPinst ORACLE KERNEL\oradim.log.
INFO 2007-02-04 21:46:45
See 'c:\oracle\ora90/bin/oradim -new -sid DRS -STARTMODE auto' output in 'C:\SAPinst ORACLE KERNEL\oradim.log'.
INFO 2007-02-04 21:46:45
'c:\oracle\ora90/bin/oradim -new -sid DRS -STARTMODE auto' returned with '0'.
INFO 2007-02-04 21:46:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:46:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:59:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:01:31
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:01:34
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:02:18
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:02:20
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:55
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:04:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:04:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:05:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:05:35
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:06:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:06:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:10
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:40
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:41
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:44
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-04 22:10:44
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 22:10:44
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-04 22:10:45
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-02-04 22:10:46
See 'c:\oracle\ora90/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-02-04 22:10:46
'c:\oracle\ora90/bin/lsnrctl stat' returned with '3'.
INFO 2007-02-04 22:10:46
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-02-04 22:10:48
See 'c:\oracle\ora90/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-02-04 22:10:48
'c:\oracle\ora90/bin/lsnrctl start' returned with '0'.
INFO 2007-02-04 22:10:48
Copying file F:/sap4.7/ker/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2007-02-04 22:10:48
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2007-02-04 22:10:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
PHASE 2007-02-04 22:10:54
Database Load
INFO 2007-02-04 22:10:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Task files created
INFO 2007-02-04 22:11:03
Command files created
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 00:06:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 03:43:19
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 04:55:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:17:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:39:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:45:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:57:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:00:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:03:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:05:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:07:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:08:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:09:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:24:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:24:46
Processes finished successfully
INFO 2007-02-05 06:26:23
Creating file C:\SAPinst ORACLE KERNEL\ddicora.sql.
INFO 2007-02-05 06:26:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:30
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:43
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-05 06:26:43
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-05 06:26:43
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:55
Creating file C:\SAPinst ORACLE KERNEL\brconnect.log.
INFO 2007-02-05 06:26:55
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:55
See 'D:\usr\sap\DRS\SYS\exe\run/brconnect -c -f crsyn -o SAPDRS' output in 'C:\SAPinst ORACLE KERNEL\brconnect.log'.
ERROR 2007-02-05 06:26:55
MOS-01012 PROBLEM: 'D:\usr\sap\DRS\SYS\exe\run/brconnect -c -f crsyn -o SAPDRS' returned with '128' which is not a defined as a success code.
ERROR 2007-02-05 06:26:55
FJS-00012 Error when executing script.
kindly help me where i am going wrong.
Yours friendly,
Bharath.Hi Andreas,
many thanks to you for the timely help.
a.)I want to know why there is an error at brconnect ? why is it returning an error code (128) at UPDATE DATABASE STATISTICS stage.
I have read in this forum itself that the UPDATE STATISTICS need not be suceesfully completed and we can edit database.r3s
" ..on the other hand you can easily invoke the update statistics after the installation has ended (succesfully!)...edit DATABASE.R3S (or the appropriate template file you are using) by changing the status=ERROR to status=OK...this will let you finish the installation..-GreetZ, AH."
I have searched for this file (database.r3s) in my system in vain Where can i find this file database.r3s?.
Have i done any configuration mistake at the pre-installation stage. I have installed Oracle 9.0 using setup.exe of oracle. should i use sapserver.cmd to install oracle?.I havent applied any patch for Oracle 9.0
Should I apply any patch just the same way we do for Oracle 8.1.x ?. If so, where can i get the patch for Oracle 9.0 .?.
b.) You said there should not be any spaces in file path (ex: C:/SAPinst ORACLE KERNEL/) . But I havent specified file path, the r/3 setup itself has created the directory path.
c.) I want to know one thing- should we create a database before installing r/3. When we are installing Oracle 8/9. x what are the components that we are installing?
Your friend,
Bharath. -
Errors During sap 4.7 installation-kindly help
Hi friends,
I am getting 3 errors during sap 4.7 installation.kindly help.
i herewwith giving the error details:-
1. R/3 Basis System Initialization DB-Connect Failed, Return code 000256
2. R/3 Basis System: operating system call Recv failed error no. 10054
3. R/3 Basis System: Database connection Disconnected.
After i have strated the sap server(MMC) first it will goto yellow and then green and againg goes to yellow color. message and dispatcher turned to gray.
Pls help.your advise is considered very useful
Thanks and Regards,
willaimWilliam
What OS are you using please? (Windows I assume) On the surface, it sounds like a socket error. (i.e. the message server port is blocked by an existing application).
The dispatcher will fail as a result of the message server not being available. Would you check and post the contents of the 'dev_ms" file in the work directory? Also, contents of the dev_disp would be helpful here also.
Thanks,
Tim -
Error during SAP NW73 Installation in Create ICM userstore phase
Hello Experts,
I facing issue in new installation of SAP NW7.3 with oracle as database on Linux.
Getting error in phase Create ICM user store as , could not load SSF library /usr/sap//D00/exe/libsapcrypto.so, Though I have libsapcrypto.so in Kernel directory. Also I tried with new libsapcrypto.so from SMP. But nothing helping here.
I have tried with many solutions as per SCN, by changing kernel and all none of these are helping. Kinldy let me know if you have suggetions.
Thanks in advance,
Regards,
ShivaHi Shivan
Could refer the SAP Note with workaround solution on your kernel version
1926471 - Could not load SSF library libsapsecu.so
BR
SS -
Error while doing EHP4 upgrade in downtime phase
HI .
Iam facing the below error while doing the EHP4 upgrade , in downtime phase.
Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 >
Connect to SAP gateway failed Connect_PM GWHOST=Hydhtc4526D, GWSERV=sapgw04, SYSNR=04 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.136.162.30:3304' not reached TIME Mon Jun 06 18:17:46 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -10 MODULE nixxi.cpp LINE 3286 DETAIL NiPConnect2: 10.136.162.30:3304 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER System start failed
Please help me in resolving this error.
Sanketh.Hi,
Upgrade tool is trying to start the system but system is not coming up. Try to start system manually and see if system comes up or not. If not then check logs in work directory for why system is not coming up.
Thanks
Sunny -
Kernel Change 7.00 -- 7.01 during SAP EHP4 SAINT
Hi!
I would like to upgrade SAP ECC 6.0 system to SAP EHP4.
My OS platform is Windows 32, so I use SAINT
Now I should change the Kernel from 7.00 to 7.01.
By doing so I go to directory E:\usr\sap\GTE\SYS\exe\nuc\NTI386 and change the kernel (SAPEXE, SAPDB, TP and R3Trans)
When I try to start my system the sapcpe.exe will be red
Do I need to change some additional binaries/DLL?
Thank you very much!Hi,
Please refer to below SAP Note.
" Note 19466 - Downloading SAP kernel patches"
Please also refer to the below forum
"Kernel upgrade procedure in Windows"
With Regards,
Saurabh -
Error during a system copy with HANA DB
Hello,
I´m doing a system copy in a SAP ERP 6.0 EHP7 with SAP HANA DB.
During a homogeneous system copy procedure with SWPM, it show me the following error during the phase Database refresh postload-activities.
I checked some log files:
-- sapinst.log:
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed:
===...could not load SSF library S:\usr\sap\\D00\exe\sapcrypto.dll .
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed: 543 wlikey_sign_for_installer: Couldn't load SAPSECULIB ("S:\usr\sap\\D00\exe\sapcrypto.dll") using function SsfSupInitEx (), rc = 10 (no library).
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed: 542 wlikey_sign_for_installer: At least one more attempt to load the SAPSECULIB will follow.
INFO 2014-08-24 16:14:01.234
Switched to user: ASCENDUMCE\ed1adm.
INFO 2014-08-24 16:14:01.343
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\saplikey.log.
INFO 2014-08-24 16:14:01.390
Switched to user: ASCENDUMCE\ed1adm.
INFO 2014-08-24 16:14:01.422
Output of S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX is written to the logfile saplikey.log.
WARNING 2014-08-24 16:14:01.640
Execution of the command "S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX" finished with return code 2. Output:
saplikey: failed to connect to the database.
ERROR 2014-08-24 16:14:01.640
CJS-30023 Process call 'S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX' exits with error code 2. For details see log file(s) saplikey.log, dev_slic.
ERROR 2014-08-24 16:14:01.703
FCO-00011 The step createTempLicense with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_Postload|ind|ind|ind|ind|postload|0|NW_Postload_DBRefresh_ABAP|ind|ind|ind|ind|abap|0|NW_Temp_License_ABAP|ind|ind|ind|ind|lic|0|createTempLicense was executed with status ERROR ( Last error reported by the step: Creating a license signature failed:
===...could not load SSF library S:\usr\sap\\D00\exe\sapcrypto.dll .).
INFO 2014-08-24 16:14:02.31
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\__instana_tmp.xml.
INFO 2014-08-24 16:14:02.734
Removed file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\instslana.xml.
INFO 2014-08-24 16:14:02.734
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\instslana.xml.
-- saplikey.log:
saplikey: failed to connect to the database.
-- dev_likey:
-> init()
STATEMENT_CACHE_SIZE = 1000
-> init()
-> loadClientRuntime()
Loading SQLDBC client runtime ...
SQLDBC Module : S:\usr\sap\ED1\hdbclient\libSQLDBCHDB.dll
SQLDBC Runtime : libSQLDBCHDB 1.00.80.00 Build 0391861-1510
SQLDBC client runtime is 1.00.80.00.0391861
-> getNewConnection()
<- getNewConnection(con_hdl=0)
-> checkEnvironment(con_hdl=0)
-> connect(con_info_p=0000000000000000)
Try to connect via secure store (DEFAULT) on connection 0 ...
*** ERROR => Connect to database failed, rc=1, rcSQL=10
[dbhdbsql.cpp 332]
SQLCODE : 10
SQLERRTEXT : invalid username or password:
-> SetSdbDbslCA(errcode=10)
-> freeConnection(con_hdl=0)
close all opened locators of connection 0
} DbSlHDBConnect(rc=99)
***LOG BY2=> sql error 10 performing CON [dblink 559]
***LOG BY0=> invalid username or password: [dblink 559]
*** ERROR => saplikey: failed to connect to the database. [saplikey.c 830]
release memory of the SIBU buffers
release memory of the STATEMENT CACHE
Can you help me please!? This is very urgent!
Thank you,
samid raifHello John Appleby,
I ran the R3trans -d and this is the output:
4 ETW000 r3trans version 6.24 (release 741 - 10.06.14 - 20:14:07).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 24.08.2014 - 20:22:19
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Sun Aug 24 20:22:19 2014 124 0.000124
4 ETW000 [ dev trc,00000] db_con_init called 103 0.000227
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): usage of ssfs switched off (rsdb/ssfs_connect=0)
4 ETW000 94 0.000321
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 44 0.000365
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 26 0.000391
4 ETW000 [ dev trc,00000] Loading DB library 'dbhdbslib.dll' ... 64 0.000455
4 ETW000 [ dev trc,00000] DlLoadLib success: LoadLibrary("dbhdbslib.dll"), hdl 0, count 1, addr 000007FEEFE00000
4 ETW000 5889 0.006344
4 ETW000 [ dev trc,00000] using "S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\dbhdbslib.dll" 35 0.006379
4 ETW000 [ dev trc,00000] Library 'dbhdbslib.dll' loaded 36 0.006415
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library dbhdbslib.dll 52 0.006467
4 ETW000 [ dev trc,00000] Version of 'dbhdbslib.dll' is "741.10", patchlevel (0.43) 111 0.006578
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library dbhdbslib.dll 39 0.006617
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library dbhdbslib.dll 63 0.006680
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 81 0.006761
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=39,arg_p=0000000000000000) 40 0.006801
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 29 0.006830
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=000000000221F280) 34 0.006864
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 29 0.006893
4 ETW000 [ dev trc,00000] New connection 0 created 25 0.006918
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 63 0.006981
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=0000000141FF5E40) 49 0.007030
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 30 0.007060
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 31 0.007091
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 42 0.007133
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 28 0.007161
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 124 0.007285
4 ETW000 [ dev trc,00000] { DbSlHDBConnect(con_info_p=0000000000000000) 61 0.007346
4 ETW000 [ dev trc,00000] DBHDBSLIB : version 741.10, patch 0.043 (Make PL 0.43) 65 0.007411
4 ETW000 [ dev trc,00000] HDB shared library (dbhdbslib) patchlevels (last 10) 37 0.007448
4 ETW000 [ dev trc,00000] (0.043) R3szchk with partitioned tables (note 2040561) 32 0.007480
4 ETW000 [ dev trc,00000] (0.031) New DBCON syntax for HANA (note 1983389) 50 0.007530
4 ETW000 [ dev trc,00000] (0.028) Bulk insert stop on duplicate, dbsl returncode corrected (note 1996982)
4 ETW000 51 0.007581
4 ETW000 [ dev trc,00000] (0.027) Set DBAREQ class (note 1991383) 35 0.007616
4 ETW000 [ dev trc,00000] (0.022) Get database version via dbsl call (note 1976918) 36 0.007652
4 ETW000 [ dev trc,00000] (0.020) FDA: Core Dump in SELECT ... FOR ALL ENTRIES for tables with strings (note 1970276)
4 ETW000 53 0.007705
4 ETW000 [ dev trc,00000] (0.020) SQL DDL with data aging (note 1897636) 35 0.007740
4 ETW000 [ dev trc,00000] (0.017) Datatype NCLOB missing in tablesize calculation (note 1952609)
4 ETW000 52 0.007792
4 ETW000 [ dev trc,00000] (0.014) Tablesize calculation for HANA optimized (note 1952609) 36 0.007828
4 ETW000 [ dev trc,00000] (0.014) Native SQL UPSERT with DataAging (note 1897636) 32 0.007860
4 ETW000 [ dev trc,00000] 22 0.007882
4 ETW000 [ dev trc,00000] -> init() 33 0.007915
4 ETW000 [ dev trc,00000] STATEMENT_CACHE_SIZE = 1000 212 0.008127
4 ETW000 [ dev trc,00000] -> init() 615 0.008742
4 ETW000 [ dev trc,00000] -> loadClientRuntime() 46 0.008788
4 ETW000 [ dev trc,00000] Loading SQLDBC client runtime ... 31 0.008819
4 ETW000 [ dev trc,00000] SQLDBC Module : S:\usr\sap\ED1\hdbclient\libSQLDBCHDB.dll 1327 0.010146
4 ETW000 [ dev trc,00000] SQLDBC Runtime : libSQLDBCHDB 1.00.80.00 Build 0391861-1510 84 0.010230
4 ETW000 [ dev trc,00000] SQLDBC client runtime is 1.00.80.00.0391861 50 0.010280
4 ETW000 [ dev trc,00000] -> getNewConnection() 37 0.010317
4 ETW000 [ dev trc,00000] <- getNewConnection(con_hdl=0) 100 0.010417
4 ETW000 [ dev trc,00000] -> checkEnvironment(con_hdl=0) 53 0.010470
4 ETW000 [ dev trc,00000] -> connect(con_info_p=0000000000000000) 42 0.010512
4 ETW000 [ dev trc,00000] Try to connect via secure store (DEFAULT) on connection 0 ... 86 0.010598
4 ETW000 [dbhdbsql.cpp,00000] *** ERROR => Connect to database failed, rc=1, rcSQL=10 11122 0.021720
4 ETW000 [ dev trc,00000] SQLCODE : 10 68 0.021788
4 ETW000 [ dev trc,00000] SQLERRTEXT : invalid username or password: 40 0.021828
4 ETW000 [ dev trc,00000] -> SetSdbDbslCA(errcode=10) 41 0.021869
4 ETW000 [ dev trc,00000] -> freeConnection(con_hdl=0) 43 0.021912
4 ETW000 [ dev trc,00000] close all opened locators of connection 0 60 0.021972
4 ETW000 [ dev trc,00000] } DbSlHDBConnect(rc=99) 65 0.022037
4 ETW000 [ dblink ,00000] ***LOG BY2=>sql error 10 performing CON 68 0.022105
4 ETW000 [ dblink ,00000] ***LOG BY0=>invalid username or password: 35 0.022140
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=41,arg_p=0000000140541C48) 107 0.022247
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 79 0.022326
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=14,arg_p=0000000002215998) 38 0.022364
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 28 0.022392
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=50,arg_p=0000000002215990) 33 0.022425
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 43 0.022468
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=13,arg_p=00000000022159B0) 35 0.022503
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 27 0.022530
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=52,arg_p=0000000002215A00) 33 0.022563
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 28 0.022591
2EETW169 no connect possible: "DBMS = HDB --- SERVER = '' PORT = ''"
4 ETW000 [ dev trc,00000] release memory of the SIBU buffers 2900 0.025491
4 ETW000 [ dev trc,00000] release memory of the STATEMENT CACHE 91 0.025582 -
Error while doing EHP4 upgrade
Hello Colleagues,
While doing EHP4 upgrade on windows 2008 server in extraction phase, i am getting following error message:
Unable to execute the SDT request ABAP operation extract on hostname inmumeucpi instance 00 Extraction of the ABAP upgrade request ABAP has failed Error from unit observer Tool connector failed with . Start of SAPup failed: OS process 'G:\EHPI\abap\bin\SAPehpi.exe' start failed. java.io.IOException: Cannot run program "G:\EHPI\abap\bin\SAPehpi.exe" (in directory "G:\EHPI\abap\bin"): CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail java.io.IOException: Cannot run program "G:\EHPI\abap\bin\SAPehpi.exe" (in directory "G:\EHPI\abap\bin"): CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail java.io.IOException: CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail . OS process 'G:\EHPI\abap\bin\SAPehpi.exe' start failed. java.io.IOException: Cannot run program "G:\EHPI\abap\bin\SAPehpi.exe" (in directory "G:\EHPI\abap\bin"): CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail java.io.IOException: Cannot run program "G:\EHPI\abap\bin\SAPehpi.exe" (in directory "G:\EHPI\abap\bin"): CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail java.io.IOException: CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail
Please look into it ASAP.
Regards,
Nitin> The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail
This is caused by a missing security patch:
Note 1402510 - Resolving SideBySide Assembly Errors
which finally points to
Note 1375494 - SAP system does not start after applying SAP kernel patch
Install the security patch from that note.
Markus -
Error during server(NW2004s installlation with PI)...
Hi all,
I am getting this error during server installation..(NW2004s installlation with PI)...
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs
ctsintcosnw1\dump\NW04s_AIX\EXPORT_51031504\EXP1;
ctsintcosnw1\dump\NW04s_AIX\EXPORT_51031504\EXP2;
ctsintcosnw1\dump\NW04s_AIX\EXPORT_51031504\EXP3 -installDir "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS" -orderBy size -r3loadExe C:\usr\sap\LXI\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -impJobNum 3 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 2. Output: java version "1.4.2_09"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)Required system resources are missing or not available: Import directory '
ctsintcosnw1\dump\NW04s_AIX\EXPORT_51031504\EXP1' does not exist; Import directory '
ctsintcosnw1\dump\NW04s_AIX\EXPORT_51031504\EXP2' does not exist; Import directory '
ctsintcosnw1\dump\NW04s_AIX\EXPORT_51031504\EXP3' does not exist.
But the fact is the specified files are there in that specified location..(it is in mapped drive and i am working through remote logon)..
waiting for ur relies..
Its highly needed..
Points will be rewarded definitely..
With regards,
Manikandan Rajendran,
Cognizant.Hi,
I had the same problem, so I copied the tree DVD in the server local drive and the sapinst work fine, I completed the installation. -
Error during OIM schema upgrade during product ugprade from 9.1.0.2 to 11g
Hi All,
We have received following error during product upgrade from 9.1.0.2 to 11g.
Error occurred during fourth step ( Task 4: Use Upgrade Assistant to Upgrade the Oracle Identity Manager Schema)
On the screen while running upgrade assistance (ua.bat)
Following message came on screen.
Schema Version registry >> succeeded
Oracle Identity Manager Schema Upgrade >> Failed
I could see only following error in the log file.
\middleware_home\Oracle_IDM1/server/db/oim/oracle/Upgrade/Oracle_upg_91_92_x2ell_92.sql
[2012-06-28T09:34:51.147-06:00] [FrameworkMR] [NOTIFICATION] [] [upgrade.FrameworkMR] [tid: 14] [ecid: 0000JWnikOB6qIvyKWYBSQ1Fv7Zd000005,0] finalize() instance 1 of 2
[2012-06-28T09:35:00.863-06:00] [OIM] [INCIDENT_ERROR] [] [upgrade.OIM] [tid: 13] [ecid: 0000JWnijRj6qIvyKWYBSQ1Fv7Zd000004,0] UPGCMP-00924: SQL error [{0}]
[2012-06-28T09:35:00.863-06:00] [OIM] [INCIDENT_ERROR] [] [upgrade.OIM] [tid: 13] [ecid: 0000JWnijRj6qIvyKWYBSQ1Fv7Zd000004,0] [[
java.sql.SQLSyntaxErrorException: ORA-00955: name is already used by an existing object
ORA-06512: at line 31
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1074)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
at oracle.jdbc.driver.OracleStatement.executeUpdateInternal(OracleStatement.java:2123)
at oracle.jdbc.driver.OracleStatement.executeUpdate(OracleStatement.java:2067)
at oracle.jdbc.driver.OracleStatementWrapper.executeUpdate(OracleStatementWrapper.java:306)
at oracle.ias.mrua.plugin.oim.SchemaUpgrader.loadScript(SchemaUpgrader.java:303)
at oracle.ias.mrua.plugin.oim.SchemaUpgrader.doUpgrade(SchemaUpgrader.java:139)
at oracle.ias.mrua.plugin.oim.OIMSchemaUpgradePlugin.doUpgrade(OIMSchemaUpgradePlugin.java:302)
at oracle.ias.mrua.MRUA.executePlugins(MRUA.java:3672)
at oracle.ias.mrua.MRUA.internal_driver(MRUA.java:2448)
at oracle.ias.mrua.MRUA.driver(MRUA.java:1710)
at oracle.ias.upgrade.gui.UAUpgradeThread.run(UAUpgradeThread.java:390)
Any Idea ?
RituHi All,
We are also trying to upgrade OIM 9.1.0.2 which is present in our environment to OIM11g. Request your help.
Now how do we achieve the upgrade? Should my source of OIM9i software and target of OIM 11g software be installed on the same server?
I did install OIM11g and OIM9i on the same server and tried to do schema upgrade based on the link:
Upgrading Oracle Identity Manager Environment
But during examine phase I get error the below error
UPGAST 00091- ERROR DURING EXAMINE OF COMPONENETS
UPGAST 01004- UPGRADE IS UNABLE TO DYNAMICALLY LOAD COMPONENET SPECIFIC SOFTWARE MODULES.
When i check in the log in internet it says :
Cause: Repository upgrade framework was unable to dynamically load the Java classes of its component-specific software modules. mrua.xml file might have been corrupted.
Action: This is an internal error. Verify that the Java classpath has been correctly set, the mrua.xml file is correct, and that the .jar files for all component-specific software modules are present in the jlib directory. Contact Oracle Support Services for assistance
What is the javaclasspath to be set?how to check if mrua.xml and jar files are fine
Pls help.Any help is much appreciated. -
Error during OIM schema upgrade- OIM 9.1.0.2 to 11g
Hi All,
We are trying to upgrade OIM 9.1.0.2 which is present in our environment to OIM11g. Request your help.
Now how do we achieve the upgrade? Should my source of OIM9i software and target of OIM 11g software be installed on the same server?
I did install OIM11g and OIM9i on the same server and tried to do schema upgrade based on the link:
http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10129/upgrade_oim.htm
But during examine phase I get error the below error
UPGAST 00091- ERROR DURING EXAMINE OF COMPONENETS
UPGAST 01004- UPGRADE IS UNABLE TO DYNAMICALLY LOAD COMPONENET SPECIFIC SOFTWARE MODULES.
When i check in the log in internet it says :
Cause: Repository upgrade framework was unable to dynamically load the Java classes of its component-specific software modules. mrua.xml file might have been corrupted.
Action: This is an internal error. Verify that the Java classpath has been correctly set, the mrua.xml file is correct, and that the .jar files for all component-specific software modules are present in the jlib directory. Contact Oracle Support Services for assistance
What is the javaclasspath to be set?how to check if mrua.xml and jar files are fine
Pls help.Any help is much appreciated.Hi All,
We are also trying to upgrade OIM 9.1.0.2 which is present in our environment to OIM11g. Request your help.
Now how do we achieve the upgrade? Should my source of OIM9i software and target of OIM 11g software be installed on the same server?
I did install OIM11g and OIM9i on the same server and tried to do schema upgrade based on the link:
Upgrading Oracle Identity Manager Environment
But during examine phase I get error the below error
UPGAST 00091- ERROR DURING EXAMINE OF COMPONENETS
UPGAST 01004- UPGRADE IS UNABLE TO DYNAMICALLY LOAD COMPONENET SPECIFIC SOFTWARE MODULES.
When i check in the log in internet it says :
Cause: Repository upgrade framework was unable to dynamically load the Java classes of its component-specific software modules. mrua.xml file might have been corrupted.
Action: This is an internal error. Verify that the Java classpath has been correctly set, the mrua.xml file is correct, and that the .jar files for all component-specific software modules are present in the jlib directory. Contact Oracle Support Services for assistance
What is the javaclasspath to be set?how to check if mrua.xml and jar files are fine
Pls help.Any help is much appreciated. -
"error during installation" 10.3 with iMac G5 Please Help
Hi there, I have an iMac G5- the first iteration 17". I am preparing to sell it so I used disk utility off of the original OSX DVDs (or CDs) that came with the computer to erase the drive and do the 7 pass overwrite. I have subsequently tried to reinstall the original OS (10.3) and I get the same error every time. "There was an error during installation. Please try again."
I have tried repairing disk permissions, and repairing the disk. They execute succesfully (after a restart) and yet I receive the same error message. Can someone please help me. Thank you in advance for your time.
-EricThis indicates you are upgrading to 10g from some previous Oracle version. It also indicates your libraries either do not exist or exist in a location that the new installation is expecting to see them (in this case look at where you have your lib and lib32 specified at)
-
Error during the save process with Planning data form
Hi,
When in Planning web-client, I am trying to make changes to data on a data form. The cells are level-0 members (Yellow and writeable in a bottom-up Working version). When I save, it takes a while to process the request, then gives me the following error message: "There was an error during the save process."
The data form is fairly large, could this be causing the problem? I am a able to save data on other forms that correspond to the exact same set of members and dimensions with no problem. What are possible causes of this error? I have tried stopping and starting planning and the entire EPM system. Thank you.Hi,
I believe you are using V11, I would stop planning, clear out log \Hyperion\logs\services\HyS9Planning-sysout.log, start planning, replicate the error and then going in look if the log has any more detailed information.
Cheers
John
http://john-goodwin.blogspot.com/
Maybe you are looking for
-
How to remove tags from a folder
I have reset my tags, but I still have a few folders that will not allow me to remove the colour tag. On other folders I simply clicked the X in the coloured dot to remove the tag, but a few the opition is greyed out. I also tried checking and unchec
-
Save Pdf form on my PC in pdf format
I created pdf form in SFP in our Sandbox. Now I want to upload this form into the Dev. The form is residing in Sandbox SAP. So I have somehow to move this form out of SAP. Then I would go to Dev and use SFP (Live Cycle Designer) option to Import the
-
I opened iTunes and the cloud is not syncing up, so i cannot watch movies or tv shows over the cloud through itunes, however it was there a few days ago, now randomly gone.
-
I purchased two songs on i-tune and when I attempt to down load them, I get an error,"you do not have enough access privilege for this operation.?????
-
Hi - I'm thinking of buying CS4 and if I like it and find I need the extended version at a later date, is there an upgrade path? Price in UK? Thanks