Exeel 2 y-axis in xline graph

Hi all,
I'm a fresh user using office toolkit.
I'm doing a project. I want to using office toolkit to draw a single graph in Excel but it has 2 different y-axis in 2 sides.
LHS is % Relative Humidity, RHS is Temp(degC)
They both have different ranges (%RH) range from 0 to 100%, degC from 0 to 50.
Now I can present 2 data in seperate 2 graphs how about can LV 7.1 can draw the above data in single xlines graph?
Thanks.
Regards,
Robert

Drop the X-Y Graph on to the front panel then right click the scale of the graph, select "Duplicate Scale" With the second scale displayed right click one of them and choose "Swap Sides" you can now edit the upper and lower values for each scale.
To assign the two plots you need both plots showing in the Plot Legend box, right click Plot 0 and choose the Y Scale to be % Humidity then right click Plot 1 and set Y Scale to Deg C - Mike
Attachments:
dual scale graph.JPG ‏62 KB

Similar Messages

Unequal size of X, Y, Z axis for 3D graph

Hi,
I have different size of array in X, Y and Z axis. What graph should I use best? I tried using 3D surface graph but it consume all my memory.
My data is X = 1 X 41 array
Y = 1 X 32768 array
Z = 41 X 32768 array/matrix
Thanks a lot...

Samuel S wrote:
That is also correct
Ben Im not going to lie that is a great song! I have that from the 1996 Rhythm of the Games Olympic Soundtrack
My Mother used to play the Sound Track from the Movie (Peter O'Toole and Sophia Loren) and it left a mark on me but that was nothing until I sat up all night with a case of beer and the movie on VHS so I could rewind and memorize the words.
Don Quiote is what keeps me from pulling a John Galt and the signature is there to remind me.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Axis in Pie Graph

Hi,
Can we show the X-Axis and Y-Axis for a Pie-Graph??
I am able to display the Pie-Graph for a given combination through VO but in my display i am not able to see the X-Axis and Y-Axis lines.
only the graph is getting displayed without the lines.
I have tried by setting in property inspector the following properties to true.
"Data Axis Scale From Zero" and "Display Data Markers" both to true
But still i am not able to see the lines in my screen.
Can i get some help from anyone regarding this???
Thanks in advance

No, there is no provision of showing x and y axis in pie graph. I am still not able to understand how do you want to incorporate and map date on x,y axis along with a pie graph in between. All you can do is to plot a bar graph separately to show the data along x, y axis.
--Shiv

Is there a way to link the x-axis of multiple graphs in a report? Using DIAdem 12.0

Is there a way to link the x-axis of multiple graphs in a report? Using DIAdem 12.0

What I am after is this... If I have multiple 2D axis systems in a report with each y axis showing different channels of a particular data file and with each x axis being the time stamp of that data file, rather than changing the x axis values of each 2D axis system to zoom in on a time slice, I'd like to change only one and have all the others match. So I suppose yes, I want each of the multiple 2D axis systems to have the same x axis, but I want unique 2D axis systems, not one system with multiple y axis or "n systems". I'm hesitant to post a sample report as this is a public forum. Thank you.

Problem Axis Image on Graph

Hi,
I'm having a problem with displaying an axis on a graph. The graph is composed of layered panes and I need to display a mathematical formula on one of the axis. This was previously done using an image...
A product evolution requires the modification of the fonts used when printing the graphs, obviously this will not be compatible with a static image. Does anyone have any ideas on how do display the text highlighted in the image shown, in a manner that allows for the changing of fonts in a dynamic manner?
[ScreenShot001.jpg|http://www.maths.tcd.ie/~moroneyk/ScreenShot001.jpg|ScreenShot001.jpg]
Thanks in advance,
Kevin

That is actually rather simple: you use animation techniques, but rather than using an animation loop to change on a set interval, you change as you are ready to show your new screen. You do this with a repaint() request.
I usually like to implement this by doing my rendering to a BufferedImage, and then a paint override in my display object.
public void paintComponent(Graphics g){
g.super();
g.drawImage(bi, 0, 0, this); //bi is a instance scoped BufferedImage that I use for rendering.
}

How to add Diagonal Axis on 2D graph

I try to plot data like this picture attached . is there anyone who know how to plot three axis on same graph . Here, Axis is added diagonally. and point of Three peak value is marked as point.
Help me. is it possible in labview? See JPG file .
Attachments:
SDC11183.JPG ‏2664 KB

Hi Wenjun,
Thank you for the idea.
Is there any way to display label for only one measure out of two measures defined?
Thanks & Regards,
Pruthvi G N.

Does not display axis label in graph when exported to excel

I have a wierd issue.I have a report with graph with coloum chart and axis labels description on x axis.WHen i export the report to PDF everything looks OK.But when i export it to excel few axis labels disapper.Out of 12 labels only 2 apper when exported to excel.Has anyone encountered this issue.
If so is there a way to fix this.
PS: I am using BO XI 3.1 Webi.
Thank you,
Sanjeev

hi,
I have tried this out with a sample.
In WEBI preview mode and PDF, all axis labels will appear fine.
But when exported to excel, some labels will disappear.
Workaround: We have to increase the chart size in Excel till all axis labels appear clearly.
Regards,
Vamsee

How to avoid repeatition of axis labels in Graphs in WebI 4.0??

Hello All,
I am working with graphs in WebI 4.0. In category axis, the labels are being repeated thrice ,twice and so on based on the filter which I have placed according to my requirement.. I need them to be displayed only once. I have used axis label delete factor from Format chart. But then it solved only partial problem. Appreciate your help.
Regards,
Anila.

plz
try this
create a one more vertical table
and check that location-text and location-key are some .
we think it would be like this
location-text     location-key
can                          01
cbg                          02
det                           03
txc                           04
txc                           05
bec of different key and some description the axis is getting repeating.

How can you rotate the labels on the category axis of a graph in Illustrator and have it stay the same when updating the graph data?

I am needing to create a line graph with dates consisting of MM/DD/YY along the category axis. I would like to rotate the labels 45 degrees and have them stay when I update the graph. I have read about manually doing it, I even made an action to make it faster, but it still seems inefficient. Is there a setting that I could use to automatically create my labels as rotated? Thanks.

Hi Gravy Train,
I'm curious about why you are using 2 loops. You mentioned one is for monitoring and one is for DAQ....what do you mean by that? What is the overall goal of this piece of code. Also, I noticed that you are not closing the task. Since this is just a subset, I realize you could be closing it in your actual code, but just in case you're not.....it is very important that you close all tasks when you are down acquiring data.
Best Regards,
Starla T

How to display no. of seconds in HH:MM:SS format on Y-Axis in Line Graph

Hi All,
I have two columns as No. of Seconds and Date.
I want to create a Line Graph with Date on Horizontal Axis (X - Axis) and, on Vertical Axis (Y - Axis) I want to represent the No. of Seconds as HH:MM:SS format.
For example, If the DB returns No. of Seconds as 93, I want to get it on Vertical Axis as 00:01:33 (00 hours, 01 Minute, 33 seconds), If it is 145 seconds , I want to get it as 00:02:25....etc.
Can anyone please help me on this ?

Srini VEERAVALLI I already used this code and I'm getting HH:MM:SS format in Table View, but my requirement is I need to represent the HH:MM:SS format on Vertical Axis in Graph View. In Graph View by default it's considering No. of Seconds only.....
Srini VEERAVALLI, is your full name is Srinivas Veeravalli ?

Really odd y axis and scatter graph HEEEEELLLLPPP

Ok so whenever I try to plot a graph of certain data, it always comes up with the same graph which is not the one I am trying to plot!!! There are also two 2s on the y axis this is reeeaaaallly anoying help would be much appretiated!
I would post a screen shot if i could

The multiple 2's are probably due to the format of the numbers on chart and the number of grid lines you have. The actual numbers are probably something like 1.5 and 2.25, which are both being rounded to 2 for display on the chart. If you format the axis so it displays more decimals, you'll see the difference between the two 2's.
Are you sure you are following the correct steps in making a chart? While the multiple 2's makes sense, the problem about it always creating the same chart does not.

Cannot make vertical axis of intensity graph logarithmic

Has anyone else noticed that that the vertical axis on intensity charts cannot be made logarithmic? Labview gives you the option, but doesn't do anything when you try and check the box. Property nodes don't seem to work either. Tried this in LabVIEW 2011 SP1 and 2013. Am I doing something wrong or is this just a feature that isn't avaiable? I am just wondering if its my install or something that is really an issue.
My application is to plot the power spectrum of sound on a intensity chart to show history of sound recorded by a microphone in real time. Really good to pin point source frequencies of feedback.
Amit

Hi Amit,
This is a documented problem with LabVIEW and it is currently being worked on. Here are a couple other Forums that discuss it and offer workarounds for this issue.
Log scale in an Intensity graph
Possible bug in Intensity Graph while using interpolate colors on a Log scale
Intensity Graph - Mapping Mode
As shown in the 'Possible Bug' link above, a Corrective Action Request has been filed under the number 453407 as soon as a couple of weeks ago. To fully answer your question, it is not your install or anything like that, just an issue NI knows about and will be working on for future releases.
Douglas C.
Applications Engineer
National Instruments

X-Axis in Line Graph

I have yet to figure out how to define a data range to use as my x-axis in a line plot. Sure, I could use an XY scatter (that can't have lines) but what if I have 4 Y variables? There is obviously something missing since, if you display the x category labels in the line graph, you get "untitles 1" etc.
Bug or missing feature?

From what I have found through trial and error, for a line graph, the column you want to be the titles on the X-axis has to be formatted as "text" when you highlight the data to plot. If it is a numeric value, Numbers will treat that column/row as a second series of data rather than X axis labels. Same goes for bar charts. Unfortunately it assumes the data is uniformly distributed so if you want lines connecting points on data with irregularly spaced x-values this sort of chart doesn't seem to be appropriate.
I think they really need to add that functionality to the scatter plots as well.

Date Range For X-Axis On Range Graph

Hi,
Is it possible to use a date range on the x-axis of a range graph rather than having to use numbers
I'm trying to show the various start and end date of projects on a single range graph and i can convert the start / end dates to number and the graph to displays as expected but some how i need x-axis to show the dates rather than the numbers
This is what I've done so far, any ideas?
http://apex.oracle.com/pls/otn/f?p=37821:5
Thanks Andy

Hi,
Just wondering if anyone had any ideas about how I could achieve this. The senior managers love the way its look but without dates across the x-axis its not much use to them
Thanks Andy

Getting dual axis on a graph in SSRS to align at 0

I have a graph that has 2 values that are plotted on dual axes. Both values can be positive or negative. Is there a way in SSRS to align the 0 point of both axes? Preferably, I would like to retain dynamic values for the axes.
I'm using 2008r2
Thanks for any help.

I figured out the issue with incrementing whole numbers, and this is the solution I used.
You will need to manually set the interval value to determine the increments you want the line showing up. In my case I wanted the primary axis to show a value every 5 and the secondary axis to show a value every 5000.
Manually setting the interval will cause the primary and secondary axes to be off again. To fix this, we will need to have the same amount of intervals on both axes. For instance, if we have 6 intervals on the primary axis we will need to have 6 intervals
on the secondary axis to keep them lined up.
I wrote custom code that will be used as expressions in the Maximum setting for both axes. The purpose of the functions will be to determine which axis will have more intervals, then calculate the maximum value needed to have the same amount of intervals.
Primary Axis Maximum Expression
=Code.FindMaxValueForPrimary(max(Fields!PrimaryField.Value), max(Fields!SecondaryField.Value))
Secondary Axis Maximum Expression
=Code.FindMaxValueForSecondary(max(Fields!PrimaryField.Value), max(Fields!SecondaryField.Value))
Custom Code
Public Function FindMaxValueForPrimary(ByVal PrimaryValue as Integer, ByVal SecondaryValue As Integer) As Integer
IF Ceiling(SecondaryValue/5000) >= Ceiling(PrimaryValue/5) Then
Return Ceiling(SecondaryValue/5000) * 5
Else
Return Ceiling(PrimaryValue/5) * 5
End If
End Function
Public Function FindMaxValueForSecondary(ByVal PrimaryValue as Integer, ByVal SecondaryValue As Integer) As Integer
IF Ceiling(SecondaryValue/5000) >= Ceiling(PrimaryValue/5) Then
Return Ceiling(SecondaryValue/5000)*5000
Else
Return Ceiling(PrimaryValue/5) * 5000
End If
End Function

Exeel 2 y-axis in xline graph

Similar Messages

Maybe you are looking for