Exemptions under section 10

Hi gurus
Pls throughj lights on exemption under 10
HRA- I maintianed 581 and not coming /4e1
like that all lta,medical also not coming in RT
with regards
partha

Hi Partha,
All the below listed components considered as exemption under section 10.
/4E1     CEA Annual Exemption
/4E2     CHA Annual Exemption
/4E3     Conveyance Annual Exempt
/4E4     HRA Annual Exemption
/4E5     LTA Annual Exemption
/4E6     Voluntary Ret. Exemption
/4E7     Leave Salary Exemption
/4E8     Gratuity Cont. Exemption.
For example suppose if you have maintained HRA and 20000 is the HRA exemption then /4E4 wage type will be generated with amount of 20000 and it will be pushed to /130 for the tax computatrion purpose via PCR IN70.
Let me know if its clear.
-Praveen

Similar Messages

How to handle TDS for Contractor under Section 94C in SAP B1 9.0

Hi Expert
If the credit or the payment (One time Payment) in pursuance of the contract does not exceed Rs.30,000/-, no deduction has to be made at source. However , if the aggregate of all amounts paid/credited or likely to be paid/credited exceeds Rs. 75,000/- then tax at source is to be deducted.
how to manage this in SAP B1 with single WTax code??
regards,
Raviraj

HI Raviraj,
Have you checked the same by setting the threshold as 75000? You may not be able to deduct TDS at the the time of payment but you can use DP Invoice for the same.
Try this, it should work.
Thanks,
Joseph

Tax Exemption (Indian Payroll)

Hi PY Experts,
I have a wagetype which is exempt under section 10. Now, i have to configure the same in indian payroll. I have assigned the tax code in V_TIN7T9 and have also maintained the allowance grouping for this wagetype. I have also maintained the exexmption infotype 582 for this.
Now, the ememption amount is being calculated in the function INCTX under the model wagetype 3FUX, but the same in not being added to the /130wagetype(exemption u/s10) and neither the exemption amount is being considered for the tax computation.
Plz help.
regards
Srikanth

Hi,
CCL 30 i have activated but still the exemption is not comming in /130.
If i m changing the PCl 10->8, 20->1 and CCL 30 checked then the amount in exemption i m getting which i m maintaing in IT15 and not which i m maintaining in 582.
Ex:
2260 Transfer wagetype chich i m maintaining in IT15 Rs 4000.
And i want exemption for this Rs 2000 which i m maintaing in IT 582 Rs2000.
Then after doing above changed ie. checked CCL30 then Rs 4000 is exempted and not Rs2000 which i m maintaining in IT 582.
Kindly suggest where i m going wrong.
Regards,
Rashmi
Edited by: Rashmi Lautre on Jun 30, 2010 10:07 AM
Edited by: Rashmi Lautre on Jun 30, 2010 10:16 AM

Issue in income tax computation

Dear All,
I have some issue in income tax calculation India Payroll for few employees.
Listed the problems below
1. Exemption Under Section 10 is not considered during Income tax calculation
2. Medi-claim is not deducted from gross salary

Hi Lakshman,
Exemption under sec 10 should be considered in the tax calculation. In the Tax calculation all the amount u/s 10 will be stored in wage type /130 and it will subtracted from the Gross salary (/416).
If this is not happening then please check the configuration of the wage type which you are using.
Normally Medical exemption will be processed before the arrival of gross salary.
Hope this will help you.
Thanks & Regards
Saroj Hial

Adobe Reader not opening PDF Portfolio - Flash player error

I have Acrobat 9 Standard installed on my PC and I created a PDF Portfolio. Acrobat Standard can open that Portfolio just fine.
I also have Acrobat Reader installed (11.0.2).and have Adobe Flash Player (11.7.700.169) installed. Both Reader and Flash Player work fine independently on PDF or Flash content.
However when I try to open the PDF portfolio with Reader, I get the following Error:
:"To view the Flash technology in this FDF file; please install this version of Flash player that supports Adobe reader and Acrobat".
The Dialog box with the message above has a [Proceed to download page] button (which does nothing but bring up Reader with a black page), a [Learn more] button (similar behavior), and a [Cancel] button. Both Reader and Flash are the latest versions as of today (4/16/2013).
Any help or insight with this is appreciated.
Thanks !
Bruce Dana.

Thank you. What you suggested di the trick !
Bruce Dana, PE, CPM
Manager, Engineering / CADD Systems Office
Florida Department of Transportation
Engineering / CADD Systems Office
605 Suwannee Street, Mail Station 69
Tallahassee, Florida 32399-0450
• Voice: (850) 245-1606
Toll Free: (866) 374-3368 extension 1606 | Fax: (850) 245-1601
• E-mail: [email protected]<mailto:[email protected]> | Web: http://www.dot.state.fl.us/ecso
How am I doing? Please contact my Director, Duane Brautigam, PE - Office of Design at:
[email protected]<mailto:[email protected]> with any feedback.
THINK GREEN: Before printing this e-mail please ensure it is necessary - conserve our resources!
Pursuant to Section 119.011 (11), Florida Statutes, all electronic communications made or received by Florida’s Department of Transportation, including its officers, employees and agents, are public records. Unless exempted under Section 119.07(6), Florida Statutes or another statute, all public records may be inspected and copied by any person desiring to do so under the supervision of the custodian of the public records.

Tax details are not showing in Form 16 ..India payroll

Hi Experts,
I have done all configurations with respect to India Payroll.But im unable to see follwing details in form 16.
A. Value of perquisites under section 17(2) are not showing in form 16.
B. Less: Allowance to the extent exempt under section 10 ....are not showing in Form 16.
C.Deductions under chapter 6A are not showing in form 16.
D.Total income .Tax on total income ,surcharge ,Tax payable are also not showing in form 16.
Probably i might have missed some important steps while configuring.Please tell and advice me to resolve the problem.Thank you very much.
Regards,
Sai.

Hi,
Firstly, check in the RT cluster table for the employee if the folowing wagetypes aare fetching values.
/416, /418, /130, /432.....few more for surcharge etc..but if the given wagetypes are fetching values, then other will also be caputured.
Also, did u maintain Tax infotypes 586, 585, 582 etc..
If yes, then problem can be with the confuguration of the wagetypes.
Please check the above and let us know...
Regards,
Pranitha

Maintain two excemption certificate for a vendor

Hi,
How to maintain two excemption certificate for a vendor.
I have a vendor, submitted lower TDS deduction certificate on april and again submitted another certificate in june with difference rate of TDS.
how to configure.
Regards
Venkat

One exemption per tax type-tax code combination can be maintained in the Vendor master. So if your taxes are of different combinations, then it is possible.
However, as per act, two exemptions are not available under the same section (For eg. you cant have two exemptions under section 196A). But it is possible to have two certificates under different sections. But even in this case, there are restrictions because at the end it is the income of the same Vendor.
So, to answer your question, technically it is possible to have two exemptions, but as per law you are not permitted, unless the act specifically permits such a provision under some notification.
Ravi.

CPU TIME and DB CPU events under TOP 5 TIMED FOREGROUND EVENTS section in AWR report

Is there any difference between "CPU TIME" event and "DB CPU" event when shown in AWR report under section "TOP 5 TIMED FOREGROUND EVENTS"?
As per my understanding of both these terms they indicate the same thing. But then if it is so then why have different names?
I searched around but the only relevant discussion that I found was as under, which didn't really cleared the doubt.
https://forums.oracle.com/message/2571255#2571255

In the article that you have mentioned - Jonathan Lewis gives you a very clear explanation. CPU Time is updated at the end of a query. DB CPU is updated every few seconds.
So the CPU Time may be less than DB CPU if there is a long running query that did not complete during the snapshot that you are reporting for. Conversly CPU Time may be larger than DB CPU if there is a long running query that spanned multiple snapshots but completed in the snapshot that you are reporting for.

Coveyance exemption amout exiding the limit 9600

Hi,
We are facing a problem regarding Car and conveyance exemption in under section -10 . in the month exemtion is giving 9600 hundred but when we are running payroll for next month it is exdiing the limit and coming as 98100.We have analysed .
/3c4 conveyance 01 01 = 1000 (conveyance amount exemption paid in that month)
/3c3 convey amt              = 1000\
/4e3 conveyance            = 9800
actually it is coming like this.
but it should come like
/3c4 conveyance 01 01    = 800(conveyance exemption paid in that month)
/3c3 convey amt              = 1000
/4e3 conveyance            = 9600
Kindly help
Laxman

Hi,
You will have to iplemnt SAP Note and upgrade Support pack, see the link
/4E3 (Annual Conveyance exemption is not coming correct)
this will help you.
Salil

When i get on yahoo, it opens me up under the primary account, but when i try to get on the secondary e-mail account it automatically shifts me back to the primary account. Dont have this problem in internet explorer.

Yahoo hosts my e-mail. It is under a primary e-mail address under @yahoo.com. Under that primary account, I have another e-mail address that is based on my own domain name. When I get on firefox and bring up yahoo, it opens under my yahoo.com address but it has a "logged in under" section which allows me to go to my .(my domain) address. When I click on that, my .(my domain) mail comes up for an instant and then firefox shifts me back to the .yahoo account.
This happens on my newer most recent windows computer but not on my older one and never, ever happens on internet explorer. I may have to abandon firefox for internet explorer if you cannot fix this.
John Howard

the settings program will not allow me to enter any of those cells. the accounts section is all in grey scale (not black) and none will open including "add account"

Exemptions

Dear sir,
Leave Encashment: tax exemption to be given if the employee declares. As per income tax upto 3,00,000/- payment of leave encashment is exempted from tax
We will be entering the leave encashment payment through info type 15 and tax exemption for the same amount to be entered as exemption under info type 582
Normally we will be paying leave encashment at the time of final settlement after termination of employeee.
in the schema the function which will do this operation is INLEA.
But in my case this function itself its not triggering.
I gave first parameter to this function is:9016(custom wage type which is copied from MLIN(AVERAGE MONTHLY SAL) model wage type)
This 9016 we are maintaing thro infotype 15 and exemption amount we are giving from the infotype 582.
and we ahev mainatined T7INT7 AND T7INT9 tables.
But Problem is in the payroll log this exemption itself its not reflecting at all?
This function itself its nt triggering?
Please explain me to reslove this issue

Hi Raam Manohar,
I have maintained tax slab code as SLEA in the table T7INT7
and i maintained exemption amount in T7INT9
But Problem is in the payroll log this exemption itself its not reflecting at all?
This INLEA(function to calculate the leave encashment exemption) function itself its nt triggering?
we are giving input 9801(Avg sal pre-instln)(custom wage type copied from MLIN (Avg sal pre-instln) model wage type )
This function itself its not triggering?
Please explain me to reslove this issue

Upload of Sections in Word Document into SAP SE38 editor

Hi
I was wondering if we can build a ABAP tool which would read different sections within the 'Technical Specification Document' word document and
- Create ABAP program in SE38
- pull content from various sections of Word document under the respective event in SE38
e.g program could pick up the content written under section '1.1- Input Selection' and have it replicated in ABAP editor before 'Initialization' Event.....
To make this happen, i am currently struggling to read the content from Word Document. Would apprecaite if you can help /share some light on this subject.
thanks

First of all I am wondering who places all the code in techinical documenation. For me it should be just a summary of all things done in the program, so it actually should be created after the report is ready, not before.
Secondly generating the code from some input stream is highly risky. Word or other applications don't have syntax checker for ABAP, right? So how do you know this coding doesn't dump once loaded to the report.
Next, dynamic report generation is of course possible with at least two ways, one would be using [generate subroutine pool|http://help.sap.com/abapdocu_70/en/ABAPGENERATE_SHORTREF.htm] but it would require whole program to be self-written not just part of it. Another way with [READ REPORT|http://help.sap.com/abapdocu_70/en/ABAPREAD_REPORT_SHORTREF.htm] and then insert your part using [INSERT REPORT|http://help.sap.com/abapdocu_70/en/ABAPINSERT_REPORT_SHORTREF.htm] but this is also not a convenient way of changing the report unless you do this deliberately and totally aware of the consequences.
As for reading Word you can use OLE or [Desktop Office Integration|http://help.sap.com/saphelp_nw04/helpdata/en/e9/0be7b9408e11d1893b0000e8323c4f/frameset.htm]. For the latter you might look at package SOFFICEINTEGRATION .
To sum up, although technically possible there is no quarantee you will have the code proper in your document so inserting it in some program might be disaster in consequences.
Regards
Marcin

Image in report header appears in front of underlaying section line objects

Hello
I am trying to simulate a company letter header with company logo in page header. I have added line objects in the underlaying sections so the user can see when the detail data/section ends.
I have inserted an image into a report header
I have set the page header to 'Underlay Following Sections'
when I preview the report, line objects in underlying sections appear behind the page header image
when I preview the report, text objects in underlying sections appear in front of the page header image
Has anybody any ideas or better ways of achieving same results please?
Ta very much.
Keith
Edited by: KDHarrison on Mar 20, 2011 8:13 PM
text objects are not behaving the same way, as a workaround I have set the top/bottom/left/right border property to single and used these instead of boxes or lines.

Hi Keith,
Thanks for your patience while this was being investigated. So the way Crystal Report's layout was designed was that items are put in a stack of multiple objects with the ability to move forward and back as needed. For some technical reason lines and boxes were left out of this which means they will always be in the back. Unfortunately we don't know the technical reasons that this was done as it goes back to some of our earliest versions, we are investigating this though.
The difficulty know is trying to find the reason for this, and determining if this can be changes with out breaking backwards compatibility. In the mean time the developer has suggested a work around and are wondering if this would work for you?
1. Insert a text object and enter nothing.
2. Change the size (the height matches the line width) and background (background color matches the line color).
3. Right click on the text object and select Move | To Front. And then the "line" will be on top of the picture.
Kind Regards,
Trevor

Section in J1INCERT - TDS Certificate

Hello Gurus,
When I am trying to print TDS Certificate through J1INCERT. It gives all the details correctly except section (Nature of Payment)
I have deducted the tax of various documents u/s 194I and when i give input in section as 194C in J1INCERT, it gives same details and print Nature of payment as Section 194C in the certificate.
System should check and gives the error wrong section code or should not display the data. Ideally it should give error or no output. If I enter 194J or 194H also, it gives the output (line items) for section 194I.
Please help
Regards,
Ankur

I know that Ravi, I have succesfully implemented new note 1486147 but the problem is different.
In selection screen of J1INCERT, see the fourth option section which is used to enter 194C OR 194J OR 194I OR 194H.
Now, my problem is that what ever section i fill here will reflect in certficate also without validating tax line items, for example: I have selected the posting parameters of one vendor in which i had deducted the tax under section 194J but in field section of J1INCERT Screen I mentioned 194C or 194H or 194I then system is printing that section in certificate in Nature of Payment.
Ideally it should allow only 194J section and must give error if we try to put section other than 194J because those line items belongs to 194J and not to 194C or H or I.
Hope you understood, please help !
Regards,
Ankur

How to add products to sections dynamically

Hi,
I was curious to know if there is any means by which we can control the display of products added to a section.
Our requirement is, based on certain inputs from customer, we need to show relevant products to customer (Guided selling).
I was planning to add all products to a section and then based on some inputs from customer, control the products displayed to customer. I have used customizable layout for the section and included a new jsp for middle1 part. This additional JSP is used to capture the inputs from customer.
I checked iStore api and could not find any methods under Section class to set visibility flag or add new products dynamically.
Please suggest any alternatives that you may have used for such a case.
Thanks
Muttu

Guided selling can be implemented using Oracle Configurator. You need to implement Oracle Configurator and integrate with iStore to provide it to end customers.

Exemptions under section 10

Similar Messages

Maybe you are looking for