Exercising with Zen Mic

Does Zen Micro have a hard dri've? And if so, would running and exercising damage it's

rpeshkov wrote:
Does Zen Micro have a hard dri've? And if so, would running and exercising damage it's
I run with my Zen Micro and it does not skip or have any other problems. I hold it in my hand so it is not subject to sharp shocks.

Similar Messages

I can't get napster to work with zen mic

I have a creative zen micro 5GB player and have updated the most recent firmware. I have Windows XP with service pack 2. I have Windows Media Player 0. I also have the subscription for Napster to Go. My problem is that when I connect my player to the computer and turn on napster, a little box comes up saying that I have connected a player (and it tells me the name of my player) that is NOT compatible with Napster to Go and that I will have to pay per track. But when you go the list of compatible players, mine is listed there as number 3. Also, when you go to this website under the zen micro, it indicates that you should be able to use the player with the service. Does anybody have any ideas? I've done a mess of things to try and get this to work. Thanks

not really 2 many ideas. have you remembered to download the application for play for sure as well as the firmware. i think its number 5 on the list. The 2 go together and wont work with out the other. You could also try accessing the clean up option and give that a try. Might update the player - sometimes they get a bit lost .
other that i cant think of anything - napster also has a discussion page sure some of there members must be/ or gone through similar?

Ipod Shuffle FM transmitter with Zen Mic

Would a fm transmitter for the ipod shuffle transmit fm and charge the zen micro? I know it would charge the zen micro, but I'm not sure if the micro outputs audio through the usb jack? Below is one of the transmitters that I've found, and wonder if it works?
http://reviews-zdnet.com.com/XtremeMac_AirPlay_digital_player_FM_transmitter__c harger_for_car/4505-659_6-3424389.html?tag=txt
Just looking for a good FM tuner, and if it will charge the micro at the same time that'd be great. I have the belkin tunecast II and it doesn't work well at all in my girlfriend's Ford Escape, so I'm trying to find something better.

I did check the site; it's not clear how it connects to the iPod shuffle, but from seeing speakers made for it, I'm sure it connects both thru USB for charging and to a "Walkman jack" for sound. (The iPod shuffle does not have a dock connector.) It should work with the following caveats:
You'll need a USB cable for the power connection (extra), plus an audio cable (probably comes with it).</LI>
You should upgrade to the latest firmware (..0 or 2.20.05) for "locked charging" capability, a must for any third-party charger.</LI>
Before connecting, set the power switch to "locked"; you can unlock it once the "breathing glow" has begun.</LI>
Message Edited by RBBrittain on 0-24-2005 05:0 AM

Running, Excersing with Zen Mic

Im thinking about purchasing a Zen Micro Phtot and was wondering if I will be able to run or excerise with it's I thoughht if it is a mini-hard dri've, I could be more acti've with it then a regualr hard dri've player.

Your choices in terms of space is really just a Nano until more companies come out with larger flash players. If you want features then there are many players out there with alot of features packed into a 52mb or gb player... yes its not much but you got the features part down.
So unless you want to wait it out for more flash players to come out in a larger size or take a risk with a hard dri've player + arm band combo and see how far it goes... But its just a caution that it is not recommended to use a hard dri've player while working out.. Even if it does have an armband attached to it. And I'm not even sure if the Zen MicroPhoto has an armband accessory.

Has anyone not had a problem with ZEN MIC

should I just buy a Nomad Xtra?

Yes, Have Micro and it is second one in 4 months, Had to send st one back because it froze up and wouldn't turn on or play. The second one is doing the same thing within 3 months with very little use. My new Micro won't go through recovery mode. This is second time it has froze up on me, phone support walked me through recovery mode and I reformatted and reloaded all my music, updated firmwar and now it has done the same thing, WHAT'S UP!!!!!

Continuous Play With Zen Mic

Hi all... first post. I recently bought a silver micro and love it. I dont know much about playlists yet and wonder if the awnser to my question lies there. When playing an album, at the end of the album, the player sto
ps.
It would be nice to have the micro continue on to the next album. Am I missing something easy?

For that, you would have to set up a playlist.
Go to Music Library > Albums and highlight the album you'd like. Tap the Options Button and selec "Add to Selected". Then scroll down and select your next album and do the same. Repeat for as many times you want or as many albums you got.

Random Problems with Zen Micro? Try a diff. USB cable

I know people have mentioned this in other posts, but I thought I would reiterate it here. Many people seem to be complaining that their player is not recognized, or only sometimes recognized, or recognized by Windows (as a USB device) but not by their Creative software, or songs won't transfer, etc. Well, I had some similar problems which ALL went away when I started using a different USB cable - the one that shipped with the Micro just doesn't seem to work consistently.
So, if you are having problems with your player that you can't seem to solve any other way, you may want to try a different USB cable. It worked for me.
Hope this helps - I am (now) loving my new Micro!

I tried a different USB cable also, I thought that it would help, but I still got the same problems. I can almost guarantee that although you think you may have solved your issues, they WILL come back.
I've also been experiencing the "Player Not Connected" problem with my Zen Micro.
I've also had the problem where the Zen Micro just freezes in the "Docked" screen even after it has been disconnected from the PC
I've noticed that these are common problems with Zen Micros with the new firmware (.0.03)
My old Zen Micro with the old, original firmware did NOT have this connectivity problem
Creative should investigate these issues associated with this new firmware, or maybe even making the old firmware available for download to see if this really is the source of all these problems.

Trouble with ZEN MX

Trouble with ZEN MXWHi,
I have some issues with my zen mx,? primarily sometimes when I listen to a playlist containing many tracks or "all tracks", my player sometimes shuts of and then have to scan the disk pefore working.
Secondly there are small pauses during playback, maybe every third track or more, I'm only talking about something like a thenth of a second but it's still very annoying. This also occurs when I have many tracks in my playlist.
Thirdly I'm not able to access the recovery mode, I've tried following the instructions from the sticky-thread in the forums (Turn on player and hold in the reset butto). However when I do, the screen goes black and no recovery mode appears ever if I hold down the button for a long time.
Anyone knows how th fix theses issues?
thanks,
/Kvick

Kvick,
Please follow these steps to access the recovery mode. If this is not working for you, please feel free to contact Customer Support for further assistance.

I have a problem with my mic i have g62-a13se

What can I do with my mic when I talk to someone I here an echo and avery loud noise ?????

Hi and Welcome to the Community!
If you have BES, then you need to talk to your BES admin for the proper method to activate your BB on BES.
If you do not have BES, then you should not even be going into anything related to Enterprise email...instead, you should see Internet or Personal email setup in addition to Enterprise. If you do not see Internet or Personal, then your device is not properly activated by your mobile service provider for BIS-level Internet/Personal email services...contact them for assistance.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem with ZEN Style M300

When I trying to found bluetooth audio devices with ZEN Style M300,? the player get to freeze after a little bit time that is searching devices, and so I have to push the reset button for using again the player. :mansurprised:Anyone have the same problem?

I have a similar problem. It recognized and paired with a Sony Ericsson MW600 Hi-Fi Bluetooth Stereo Headset once. I lost connection, could no longer connect, and tried to re-pair it. Now it recognizes the the headset's name (MW600), but when you try to pair with it stays on a "Please wait..." message. It will stay that way forever until I press the back (left) arrow. Then the message says "Remote Device not responding" and pairing fails. This MW600 headset pairs with other devices (cell phone, PC) just fine, though, so it's not malfunctioning.
I suspect this might be a Bluetooth version compatibility issue? I say that because when I connect to a Jawbone Era (pretty new device, probably latest Bluetooth spec), everything goes fine.
Also, if I clear all devices, then try to pair to just the Sony Ericsson MW600, I can get the M300 in a state where it hangs and will not respond to anything. I then have to press the reset button using a paperclip to start over.

Problems With Zen Touch Turn

After just recently purchasing a Zen Touch in December 2005, I already have problems with it.
I have never dropped it or hit it. I plugged it in to re-charge one day after using it and when it was done charging I turned it on, used it for 5 minutes then set it down. The next morning I went to turn it on to use it, and it wouldn't turn on. The blue light at the side on the power button was on, but the screen just wouldn't show up. Now the blue light won't turn off. I have read about these problems with Zen Micro freezing up and read about Zen Touch freezing up back in 2004 when it was released. I have phoned the number but couldn't seem to get through. Should I consider taking it in? Or is there an easier way?

Have you tried resetting it's Connect to the mains adapter and press the tiny recessed button on the side of the player. Don't use anything sharp to press it, a bent paper clip is best.

What's the deal with bluetooth mice ?

What's the deal with bluetooth mice ? I've never heard of any model yet that didn't come with loads of complain... (I've done my research) ... isn't there one that just works fine and that will for a few years like a standard mouse ?
I would really like one with my macbook, any recommendation, something portable, that matches well my hardware would be nice.
Or should I just wait until bluetooth mice technology works flawlessly ? What about you ?
Francis.

I've had a Macally BtMouseJr for a couple of years now, it's fairly basic but every time I've tried to replace it with a "better' one I've had to come back because of lock ups, losing the mouse altogether, slow response, random movements et al.
Therefore the BtMouseJr is the ONLY one I can actually recommend (I retract my prvious recommendation of the Sony vaio mouse - it's nice but it doesn't always work and eats batteries) wholeheartedly.
see it here.

Hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help :)

hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help

Friedrich sp wrote:
Can you send me a mixer wich can do that, please ?
Who do you think I am? Santa Claus?
What you need is not a mixer, but an audio interface with at least 4 mic inputs. There is a lot of choice there, but you should indicate a budget. You can go from, say, € 300 to € thousands, if you want.
Roland UA 1010
Focusrite Scarlett 18i8
However, there are other options (like multi-out mixer plus multi in interface, or standalone mic preamps plus interface with 4 inputs, etc). I have little experience using these however so I really cannot say much about which one(s) to get. The two mentioned above both have four mic preamps, but they are by no means the only way to do it.
The cheapest solution I can think of is to get a second 1204USB, plug it in, and in OS X create an Aggregate device (=the two are being merged into 'one virtual' interface with two discrete stereo (= four discrete mono) inputs. Disadvantage: you keep the same (limited) soundquality of the 16 bits convertors. Getting any of the interfaces mentioned earlier will also mean you'll make the significant step up from 16 to 24 bits sound.

Big Problem with Zen Micro - won't be detec

Hello people,
I got a big problem now with my Zen Micro 5GB. Since Saturday I have having my new PC, Fujitsu Scaleo
Intel Pentium D 2,8 GHz dual Processor
024MB Ram
PCI-e mainboard
Ati x700se Video Card
Windows XP with SP2 and several updates were already installed
Windows Media Player 0
Now, the problem is, I can't really use it on my PC. A few weeks ago I had the very old firmware. But then I thought I update it (why? I don't know...)I Updated to the version ..0 from Jul 05. It worked anyway...
So I plugged in the MP3 player to my new pc but it was not really detected or it did not want to work. When it was plugged in, I couldnt open any program. Even if it was Media Source or Opera or winamp... They did not appear. But they were "open" as they appeared in the task manager. So I couldnt use Media Source. So I tried with Zen Media Explorer, all buttons there were clickable but when I clicked on one butteon (like organize music...) it didnt react...
so I thought: "ok with this firmware, it wont work" So I updated the firmware to 2.2.02 Plays for sure. Neither with the new Media Source on your site nor with Zen Media Explorer (I installed the Update)it does not work. The plays for sure plugin for Media Source wasnt as well helpful. I can drag and drop files on my mp3 player, OK this is one way, but still when it is plugged in, I cant use any other program, as I cant open them.
I dont want to use the drag and drop way as I then have to download a program for editing mp3 tags and I cant as well make playlists...With Media Source it was so easy... I want to use Media Source and I want my PC react even if my Zen Micro is plugged in...
So what to do? I thought about installing the very old firmware what I had before I updated to ..0 but where can I download it's
I hope you can help me
Regards
eXMessage Edited by expredator on 0--2006 08:58 PM

MediaSource with the PFS plugin should work, if the player is being detected properly.
Presumably it isn't, so you need to verify this by looking in Device Manager when the player is connected.

MSI 1612 Error with ZEN 7 SP1

Since upgrading to ZENworks for Desktops 7, I have been unable to
distribute MSI applications. I always seem to have an error 1612 when
the application tries to distribute. I believe that this error usually
means that the path to the installation files cannot be found, usually
because of a file rights issue, but that doesn't seem to be the case here.
I distribute most applications by associating them to workstations or
workstations in a container, though I have the same 1612 error if I do
associate by user. I have the same problem whether the Distribute in
Workstation Security Space if Workstation Associated option is enabled
or disabled.
I typically use the File Rights screen under the Common tab to assign
rights to the distribution files directory, so I know that the
workstation object has rights to the files. Just to test this, I
created an app object to run an Explorer window as an unsecured system
user and made sure that I could browse to the distribution directory as
the System account.
I am currently running ZENworks 7 SP1 on a NetWare 6.5 SP5 server. All
workstations are running Windows XP Pro SP2.
As an experiment, I tried working around the problem by creating a
simple application object and running an MSI installation by calling
msiexec from a predistribution script as follows:
%WINDIR%\System32\msiexec.exe /i "\\GRYPHON\DISTRIBUTION\West Point
Bridge Designer 2004\West Point Bridge Designer 2004.msi" /qn
Installing this way seems to work fine.
Any ideas what is going wrong?
Cory Calvert
District Network Administrator
Waterloo School District

I'd like to know of this hotfix as well. I cant distribute a msi app
either due to the 1612 errors.
[email protected] wrote:
> I'm experiencing the 1612 error with Zen 7 sp1. What hotfix are you
> refering to?
>
> Lyle
>
> On Wed, 10 Jan 2007 15:48:14 GMT, dt <[email protected]> wrote:
>
>> Cory Calvert wrote:
>>> I checked, and am definitely running the SP1 agent, version 7.0.1.0, so
>>> that shouldn't be an issue. I don't think that it can' really be a
>>> rights issue, since I can browse to the installation files as the system
>>> account on the local machine and even get the installation to work by
>>> calling msiexec from a predistribution script, though I have tried
>>> assigning file rights to the entire organization just to make sure but
>>> still had the same problem.
>>>
>>> Denis wrote:
>>>> Few hints:
>>>> Try assign rights directly to WS or WS container instead through
>>>> application object.
>>>> Try SP1 agent, if you are not using it already.
>>>>
>>>> Denis
>>>>
>>>> "Cory Calvert" <[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Since upgrading to ZENworks for Desktops 7, I have been unable to
>>>>> distribute MSI applications. I always seem to have an error 1612
>>>>> when the application tries to distribute. I believe that this error
>>>>> usually means that the path to the installation files cannot be
>>>>> found, usually because of a file rights issue, but that doesn't seem
>>>>> to be the case here.
>>>>>
>>>>> I distribute most applications by associating them to workstations or
>>>>> workstations in a container, though I have the same 1612 error if I
>>>>> do associate by user. I have the same problem whether the Distribute
>>>>> in Workstation Security Space if Workstation Associated option is
>>>>> enabled or disabled.
>>>>>
>>>>> I typically use the File Rights screen under the Common tab to assign
>>>>> rights to the distribution files directory, so I know that the
>>>>> workstation object has rights to the files. Just to test this, I
>>>>> created an app object to run an Explorer window as an unsecured
>>>>> system user and made sure that I could browse to the distribution
>>>>> directory as the System account.
>>>>>
>>>>> I am currently running ZENworks 7 SP1 on a NetWare 6.5 SP5 server.
>>>>> All workstations are running Windows XP Pro SP2.
>>>>>
>>>>> As an experiment, I tried working around the problem by creating a
>>>>> simple application object and running an MSI installation by calling
>>>>> msiexec from a predistribution script as follows:
>>>>>
>>>>> %WINDIR%\System32\msiexec.exe /i "\\GRYPHON\DISTRIBUTION\West Point
>>>>> Bridge Designer 2004\West Point Bridge Designer 2004.msi" /qn
>>>>>
>>>>> Installing this way seems to work fine.
>>>>>
>>>>> Any ideas what is going wrong?
>>>>>
>>>>>
>>>>>
>>>>> Cory Calvert
>>>>> District Network Administrator
>>>>> Waterloo School District
>>>>
>> I believe there is a bug of some sort regarding sp1... i am using the
>> sp1 hot fix and it all works fine, but when I test on a sp1 i get the
>> 1622 error.....using a basic and calling the msiexec works on both.
>

Exercising with Zen Mic

Similar Messages

Maybe you are looking for