Exhange

Hi Everyone,
I am running an exchange server 2003, the problems is only two users not receiving email on their android and apples phones. Send box is showing but emails of current day are not showing. Please help me out. I m stuck from last 24-hours.

Best bet is to get the user's credentials and run it through the remote connectivity analyzer and see if there are any errors..
https://testconnectivity.microsoft.com/#&&SeaRrTWJ/JswYfKJ4p3h9XYwYhD+PC+FjD6UICZApB2WnjKBl1eRUZ2mM84Ls3cyvdOPSkawUHj5ruNawLWELTrZCNDMs16So66f0YIeSiLnjz9+78JXhhs/8N+cp4/6XEHH9zRoXupWfM2H3D8wcY54S4CH6mNNzwzKvO/8vWiySvqeJi7RdQldFJTfoLrZjrmMlg==
Also, try a manual sync on the phone and see if it generates any errors.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Similar Messages

How do I sync Exhange agenda (work) with my Macbook at home?

I have upgraded my operatingsystem from Leopard to Snow Leopard to be able to go to Lion, so i could go on with my mobile me account to iCloud.
I've been a mobile me user since 2006. Now I have been forced to swich to Lion to keep my syncronisation abbility.
After 7 years with no problems and paying each year a contribution of € 80,- for mobile me I was forced to pay € 30,- to step up to Lion.
Now I regret all those steps I have taken, because now I can't use my HP Laserjet P6 printer anymore (wrong driver I suppose). My extern network diskdrive is not reachable anymore? And most important my synchronisation with my Exchange agenda from my work is also not working since I made my upgrade?
The iPod touch (OS 3.4) and iPad(OS 5.1) both sync correctly with the Exhange agenda.
Maybee I should stop working with Apple product. But I have invested a lot of money already in Apple product. They have never let me down in the past.
But now I am not so sure anymore. Maybee back to Windows? I realy don't want to do that.

Instead of wringing your hands in despair you need to do these things:
Add (or update) your Exchange account to your Mac, it's not difficult.
Go to HP's website and download the relevant drivers for your P6 (by the way, posting the complete model number helps).
And the complete absence of any information as to what is actually happening (error messages etc) is not much help either.

Currency and exhange rates data distribution to flat file

Hi All
I have a situation like i am sending the all BI data to flat files but my problem is how can i send the currency exhange rates(TABLE:TCURR) data to flat files, is it possible using open hub desination or any other methods available please suggest me.
Regards
vasu reddy
Edited by: bvasu reddy on May 31, 2010 4:16 PM

Hi,
If i assume correct you want to supply ur data into flat file on daily basis.
You can use APD to Do this both in BW3.5 and & BI 7.0.
Creating dataflow in APD is pretty simple like process chain.
What you can do is select "table" as a data source and "Flatfile" at datatarget (both on client server or on desktop).
You will get APD option in RSA1 screen.
After creating this APD you can schedule it on daily basis etc.
Thanks and regards
Arun

Exhange rate calculations in SAPScript

Hi,
I am trying to calculate the total invoice amount for different currencies in a SAPScript.    I am running into a couple of problems.
1: I cannot seem to find the exchange rate ( KURRF ) in KOMK/VBDKA or VBDKR, do you know where else the exhange rate would be populated?
2: I cannot seem to use the commands: /: DEFINE &my_variable&
                                                                /: &my_variable& = &KOMK-FKWRT& * &KOMK-KURRF& (pretend KURRF is populated)
                       is it even possible to do that sort of calculations in SAPScripts? if not, what is an easy way to accompolish this?
                      I only need to calculate this once.
thank you.

u can use FM to get the value in print program..and pass them to the sap script...
The conversion rate is stored in TCURR table...
CALL FUNCTION 'CONVERT_TO_FOREIGN_CURRENCY'
        EXPORTING
          date             = <fs_komv>-kdatu "<<date of convertion
          foreign_currency = komk-waerk
          local_amount     = wa_komp_o-netwr "<<value to convert
          local_currency   = <fs_komv>-waers
        IMPORTING
          foreign_amount   = <fs_komv>-kwert "<<Converted value
        EXCEPTIONS
          no_rate_found    = 1
          overflow         = 2
          no_factors_found = 3
          no_spread_found = 4
          derived_2_times = 5
          OTHERS           = 6.

Problem with exhange setup. Especially regarding kalender

Can't sync. my kalender with my exhange account.

Hi,
We have solved the problem with STMS. After several tests, the problem was in the parameter SAPLOCALHOSTFULL. This parameter must be assigned the hostname of the local system for each profile instance. If you've assigned the virtual host in the cluster generates the error in the distribution of the STMS.
Regards.

If you have multiple exhange calendars can you add appointments to any of them from ical?

We use Exhange calendars in Outlook 2010 which lets you add calendars beyond the default calendar. Do all of your exchange calendars sync with ical and can you edit any of them or only the default one?

Welcome to the Apple Community.
Your device should have it's screenlock enabled so that this can't happen, but if you haven't set a screenlock, then yes someone could do this.

TV exhange policies

I purchased my Samsung 60'" UN60ES7500FXZA on 11/12. Since then i have had it repaired by geek squad 2 times due to the fact I have seen vertical lines in many colors which often leads to multiple reboots of the tv which could last 10-60 minutes. I had the main board replaced around march 13' and it lasted until this past march 14' when the same issue appeared again. Its been a week now since the geek squad technician again came by to replace the main board, all went well for a week no issues until this evening. These same issue have come back to haunt me again. It's obvious that this tv is defective and At this point its becoming a hassle to call and having a technician replace parts, i just want a working TV!!! What im really trying to ask is has anybody had a problem asking for an exhange of a product for equal value of the original purchase price for something new and comparable? Or am I just dreaming?

Hello sosobri,
I’m sorry to hear your TV has been a bit problematic for you, but I’m glad you took advantage of getting the Geek Squad Protection (GSP) plan! With how much I use my TV, when it stopped working on me in the past, I was frustrated as well. I had it repaired at no cost, as well, through my GSP.
I was able to pull up your purchase history using your email address you supplied here on the forums. I notice that you connected with us over the phone on Tuesday morning and set up an appointment for a redo on the last repair. As a reminder, you’re scheduled timeslot is 12 - 4pm on Tuesday, April 15, 2014. As SlimJim77 referred to, Exchange is possible under your Geek Squad Protection at our discretion. Your GSP plan states:
This Plan provides for the replacement of your covered product found to be defective by us. If we determine, in our sole discretion that your product needs replacement, we will replace your product with a new or refurbished product of like kind and quality that is of comparable performance or reimburse you for replacement of the product with a voucher or gift card, at our discretion, equal to the current market value of the product, as determined by us, not to exceed the original purchase price including all applicable taxes.
If we decide to give you a voucher or offer you a replacement during the process, it will fulfill your GSP plan and would need to be repurchased for the new product if you wanted to continue having the protection plan.
Should you need to have this appointment changed for any reason, please call 1-800-GEEKSQUAD. Feel free to reach out again if you have any other questions about the redo appointment.
Thanks for reaching out,
JD|Social Media Specialist | Best Buy® Corporate
Private Message

Exhange email servers

I have an iPad and I wish it to add my Exchange email account. Because I access email in a remote location, I use WiFi with a satellite service provider (Hughes). So, my incoming mail server is my company and I know its name. But my outgoing mail server is a different one. It is a Hughes outgoing server with different names and passwords etc from my office server. I cannot figure out how to get the iPad to ask the same thing for both servers. I assume I have to authenticate both incoming and outgoing servers. I cannot find where you have a POP3 and a STMP with different information. HELP

hvacdon wrote:
This has been posted on Crackberry as well. Since the 2.0.1.358 os upgrade, pb users on corporate exhange servers have been experiencing issues with multiple email sends each time a message is posted. A red X is diplayed when the message is sent, then a few seconds later a second message is displayed as sent. Not always consistent. If the X is deleted immediately, some users report that only one message is sent. It seems that messagae are being held in the outbox and some reports are that message sends repeat until the X is deleted.
All pb's on our network are showing the same symptoms since the upgrade. Users of other tablets (eg Ipad, Samsumg) on the same server are not having this problem.
This is a very annoying problem for pb users and all email recipients that are receiving mulitple repetitive emails.
Please search the forums there is another thread that dealsvwith this issue. No reason to start a new thread.
Be a Shepard and not an iSheep.

I want to exhange my iphone 5s to iphone 6

i want to exhange my iphone 5s to iphone 6.
my iphone 5s i just 5 months old.

Apple has an iPhone recycling program where they give an Apple gift card for use in the purchase of the item you want:http://www.apple.com/recycling/gift-card/
visit an Apple store genius bar and see what they are offering as the exchange value.

Exhange rates globally or cc level

can exhange rates be entered globally or only at cc level. I mean if there are 4 ccodes in different areas like CAD,MX,USD and japan can we enter exhange rate at global level(company level).IF so how can it be done and what are the pros and cons
Thanks in advance
Vikram

Exchange rates entered are applicable across the company code. Exchange rates are not entered company code specific. If you would like to have company code specific rates, may be you can explore exchange rate types.

Exhange Rate updation at query Level

Dear Experts,
While running SAP query choosing currency translation option "Conversion type on posting date", all the data takes effect with latest exchange rates.
Ex. Data for the period May-08 takes effect of exchange rate of the month of Jan-09 i.e. USD =48.90000 instead of exchange rate 40.50000 which is for May-08.
We want figures takes effect with respective months' exchange rate. We are updating exchange rate on periodic basis in BI. Pls suggest.
Thanks,
MMSl

Hi,
check this link
http://space.itpub.net/15232446/viewspace-521037
Thanks
Hema

Exhange Rate not working in sales order

Dear all,
I am facing a problem with exchange rate, I have maintain exchange rate procedure in customer master with exchange rate INR 70 = 1 EUR, Now I am creating Sales order where as i m changing Exchange rate INR 65 = 1 EUR, in sales document header as well line item, but surprisingly system is not considering 65, it is only considering 70, But i want system must consider 65 which i m manually changing in sales order.
Please suggest me to solve the problem
Regards
Shambhu

Shambu,
After changing the Exchange rate are you updating the price by going to Item conditions? If not then update the price by clicking on update button and then select B : Carry out new pricing.
Thanks,
Raja

Cost For exhange of data using SAP XI

Hi All,
For all exchange of data between legacy and SAP R/3 will their be any trasaction charges (given to SAP )involved for the data transfer using SAP XI or is it based upon the license which we have received for number of users.
i.e If I am creating a sales/purchase order which needs to pushed to SAP R/3 system on realtime basis what will be the transaction charges for when I am using SAP XI as the interface.
Will it be based upon the file size that is transfered or
Will be constant for all the transaction as we have user authroizations.
Regards,
Nithiyanandam
Edited by: Nithiyanandam A.U. on Oct 20, 2008 12:56 PM

Hi Prasad,
Thanks for the inputs.
Can you please provide me some supporting links for this..
Bcas Currently we will be transfering data only from one legacy system to SAP R/3 and viceversa.
It might involve transactions like Material careation, BOM (Bill of Material creation), Change Number creation, ECN, Costing Information etc.
Regards,
Nithiyanandam

Remote Exchange Management Console "W3SVC isn't running on any Exhange servers in site" and always shows older version after SP2 or SP3 installed

I'm trying to use EMC on a computer to remotely manage Exchange 2010 without having to do from the actual Exchange servers.
First off, upgrading, uninstalling or installing EMC always fails on "Stopping" services. Seams to be a pretty common problem, but no clear fix other than deleting the registry entry (HKLM\SOFTWARE\Microsoft\ExchangeServer) and the
"C:\Program Files\Microsoft\Exchange Server" folder. I'm guessing this is a bug since there should not be any Exchange services that need to be stopped on a computer where I'm just trying to use the EMC tool to manage Exchange.
Next, is where when I open EMC I get "The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site. If you want to connect to Remote PowerShell, this service must be running. Make sure that the W3SVC is running on
at least one Exchange server." From all the reading I am pretty sure that this is due to the Exchange servers being on one version and EMC I'm trying to use is another version.
This is the version our Exchange Servers are on:
ProductVersion   FileVersion      FileName
14.02.0375.000   14.02.0375.000   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
Which finally brings me to the part where no matter what SP I install to run EMC it always shows:
ProductVersion   FileVersion      FileName
14.01.0218.015   14.01.0218.015   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
I've tried SP2, and even SP3 hopeing that an even newer version would let me connect to Exchange, but no matter what it always shows the 14.01 version above.
I've also tried installing "Exchange2010-KB2874216-x64-en" which should be the same version we are on (Update Rollup 7 for Exchange Server 2010 Service Pack 2), but get a Windows Installer Error stating, "The upgrade patch cannot be installed
by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program." This Error probably makes sense if no matter what I do I'm stuck with a version prior to SP2.
Any ideas?

Hi,
From your description, I would like to clarify the following things:
1. Make sure the World Wide Web Publishing Service is running in Exchange server.
2. Ensure that the account you use to open EMC is a member of Organization Management role group.
3. Based on my knowledge, the error "The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program." occurs if you install
the RU for a different SP. Please re-download the Service Pack 2 and install it on the remote computer since it hasn't been installed successfully from the above information.
What's more, here is a similar thread for your reference.
Unable to install Update Rollup 4 for Exchange Server 2010 Service Pack 2
https://social.technet.microsoft.com/Forums/exchange/en-US/677c21ed-e125-41c1-a468-c268e1f21f8e/unable-to-install-update-rollup-4-for-exchange-server-2010-service-pack-2?forum=exchange2010
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Remove Exhange Rate Difference JE from Aging balance

Hello,
I'm using the Exchange Rate Differences transaction, every month since a lots of time now. So I have JE generated for all my marketing document open at the time of the transaction.
The transaction create JEs with the BP and my exchange account.
When I look at the Vendor/Customer. Liabilities Aging, there are all the JE created. I'd like to know what can I do to remove them from the list
Thank you
Sébastien

Hi Sébastien,
When you do the end month revaluation, shouldn't you check the "Auto. Reverse" option and execute the reversal in the subsequent month? Revaluation purpose at the end of the month is merely for reporting. That's why you should post the revaluation result into a unrealized gain/loss account, reverse it at the starting of subsequent month. Hence, your A/R aging for all business partner will revert back to condition as you expected.
Best Regards,
Hendry Wijaya

Unknow error when sending mail (MS Exhange)

Hello,
Since yesterday I get the following message when i want to reply to a message or just want to send a new mail (MS Exchange)
I allready did the restart / swap battery.
Does anobody knows how to solve this problem ?
Regards
Post relates to: Pre 2 p102ueu (Unlocked EU)

Sorry to leave out needed info....
Email is Thunderbird 2.0.0.22
OS is XP

Exhange

Similar Messages

Maybe you are looking for