Exhausted Number Range Invertvals

Hello,
I created number range using FBN1 but exhausted all of them till 99999999999 in one go. I want to delete this. Please guide me how to do this.
Thanks
RA

You two options:
Option#1. Create new company code and register new intervals 
Option#2. Archive the existing documents start new  intervals.
Thanks, J

Similar Messages

  • Controlling number ranges

    Hi,
    We have encountered an error when the document number range for element group COIN had been fully used already. Any transactions are not allowed to be posted since there is no more number range allotted for the document to be posted.
    In order to correct the above error, we've defined new group and assign new set of number range. Then assign the element group COIN in this group. Thus, the old group with exhausted number ranges does not have element group assignment anymore.
    I just want to clarify if the above solution won't have any effect on the prior transactions or to any data already posted?
    Any information will be highly appreciated.
    Thanks,

    Hi,
    Please read the long text of the error message. The message probably says to update the objects with certain program. Please run the program and its resolved.
    Regards
    Billa

  • Number range R4 for object BANF nearly exhausted

    Dear,
    when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
    I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
    Best regards
    Meng HM

    >
    Meng HM wrote:
    > Dear,
    >
    > when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
    > I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
    >
    > Best regards
    >
    > Meng HM
    Check this path: spro>MM>Consumption based planning>number ranges>define NR for planning run, execute and maintain the interval of planned orders.
    Then apply this internval in OPPQ, under number range button.
    Edited by: Afshad Irani on Aug 30, 2010 10:34 AM

  • Number range 01 for object BANF is nearly exhausted.

    Hi ! When we do total planning run in the background we got the message "Number range 01 for object BANF is nearly exhausted.". Our system is configured to create a new purchase requisition for every requirement. I can found that we have reached 98% of our PR number range and the warning message (through SNRO) is set at 2%. As a temporary solution, before I assisgn a new number range to PR, I reduced the percantage for warning message to 1% so that we can get few more days before the number range is changed. But, we continue to get the same error and no purchase requisition is created. Kindly help and suggest.
    regards,
    Satya

    this is probably caused by the buffering. Buffering of numbers is made to increase performance. the Program reads the number range just once to get 10 numbers (and the percentage for the warning message as well, otherwise it would not make sense to use buffers if SAP has to access the number range anytime to check if it is nearly exhausted )

  • RESB number range exhausted

    Hello all,
    I have this problem.
    The number range for RESB is almost exhausted. So how to correct this?
    for PLAF and otehrs, i know taht we can delete the MRP list and cal reset the number range.
    Is there any way to reset the RESB number range?
    Kindly suggest.
    Best regards,
    Maulin

    hi,
    system will generate requriments and it will be stored temporarly till teh dependent requriments are generated.
    so you can have the number ranges in OMI2 OMI3.
    hope this helps.
    regards,
    balajia

  • SD Billing Document Number Ranges exhausted

    hi,
    we have used separate number range for billing document for each plant. further within each plant uses five ranges - separate for Invoice, Sales Return, Credit Note, Debit Note & cancellation. we have used all possible combinations in FBN1. now there are no options available to define new intervals.
    requesting for help
    thnx in advance
    Regards,
    Sujata

    hi Hegal,
    thnx for the feed back. 
    the issue is with the avaiable options. we have used all possible combinations from 0 - zz
    there are no numbers available to define new intervals
    ======================================================================================================
    NO        From          TO         Current No
    00
    01               
    02
    |
    |
    ZZ
    Regards,
    Sujata

  • Excise Number Range for Object J_1IEXCLOC

    Dear All ,
    I am having one issue regarding excise number range for object J_1IEXCLOC and sales group : 41 Domestic. i have already maintained number range for 2009 is 0000000001 to 0000000300. Now the range is exceed and the new excise invoice is created with number 0000000001. Now i am confused if i will maintain range upto 0000000500 for 2009 then what will be the new  invoice number, whether it will be 0000000002 or 0000000301.
    Pls. Give me some suggestion, What should i do now for the number range to be in continuation.
    Regards,
    Swapnil Vaidya

    >
    swapnil vaidya wrote:
    > Dear All ,
    >
    > I am having one issue regarding excise number range for object J_1IEXCLOC and sales group : 41 Domestic. i have already maintained number range for 2009 is 0000000001 to 0000000300. Now the range is exceed and the new excise invoice is created with number 0000000001. Now i am confused if i will maintain range upto 0000000500 for 2009 then what will be the new  invoice number, whether it will be 0000000002 or 0000000301.
    >
    > Pls. Give me some suggestion, What should i do now for the number range to be in continuation.
    >
    > Regards,
    >
    > Swapnil Vaidya
    It will be 2 and not 301. This is a flaw with CIN. All transactions take place by means of internal numbers and are stored in CIN transaction tables. Hence when the range gets exhausted, the number gets reset to the beginning, yet there is no error because internal number, which is the primary key, is different.
    To solve your problem. Go to SNRO and provide the object J_1IEXCLOC and click on status. Change the status to 300 and continue with your transaction.
    Regards,
    Aroop
    PS: Your question is more relevant for SD than MM.

  • Number ranges- Shipment

    Hii All
    I have this issue wherein I have maintained number ranges for shipments from 30000 - 60000.
    The current shipment number is in the range of 59000. So it is getting near to exhaustion.
    I need to changes the number range for the shipments say from 80000 - 100000. But I am not sure whether this range is used somewhere else or not.
    Is there a way wherein I can find out whether this range is used somewhere or not or I can straight away do the change and if i do so what will be the consequences.
    Thanks & Regards
    Gaurav Manocha

    Dear Gaurav
    In the number range, on top, there is a tab "Intervals".  Just block any of the number range and click the tab Intervals.  Now after giving some value in the "No" tab, press F4 in "From number" tab so that system will itself propose unutilised number range.  Maintain that and save.
    thanks
    G. Lakshmipathi

  • Number Ranges - Best Practise

    Can anyone advise what's the best approach if a particular number range is being used up for a sales order type? Do we assign another number range?  What if we really run of number ranges, is there anyway to reuse the number range by archiving documents out?
    Thanks
    Peter

    There are many ways by which you can acheive your desired result.
    You can have number range based on Fiscal year. eg. in 2008 for Sales doc you are using no range 10, 1000000000 - 199999999 and say you exhaust that. this u can treat in two ways:
    either Reassign new number range to the sales doc say 49, 2000000000 - 2999999999.
    or reset the counter for the number range 10 to 0 (Zero) and use it. There will be no conflict in numder series use in the same fiscal year. As doc number does not total depend on number range only, it also take date into consideration.
    Hope it clears you query. If not kindly revert or esle reward.
    Take care. JP

  • Warning percentage prolem in CO document number range

    Hi all
    I have changed the warning percentage from 5% to 20% in rk_beleg object in SNRO transaction.
    According to the warning percentage i have changed the current number of a particular transaction (KP26) above 80% thro KANK transaction.
    But when i am posting the CO Document the system is not issuing the warning message KC103 "CO document number range is almost exhausted"
    Please thro a light to check the settings in the system.
    Thanks in advance
    baskaran
    +91 94483 72362

    Hi Friend,
    we are also check the no. range consistency & their is no inconsitenacy. what happen in COBK that it update the co document number range in a sequence. but in NRIV table it skip hundred & take the above number range. it mean CO document number & Current Number status which differ in COBK & NRIV table. why it happen we coundnt understand?
    can we maintain co document number range yearly?
    Warm Regards,
    Dhananjay R.

  • Number range generation

    Hi All,
    I want to use number range generation (tcode: SNRO) for generating numbers for my custom database primary key purpose.
    Can anybody give me clear idea about number generation.
    Please help its urgent. .........
    Thanks in advance.

    Hi,
    by using SNRO you will have 3 options coming to u.
    By the 1st option, u can create the new interval range from sya 0... 99999 etc..
    Using second option, u can change the existing number range, incase the existing one gets exhausted by usage.
    By the trhird option, you can delete the existing number range..
    It's upto u you can decicde any number range.. One more point to notice is that you can have External & Internal number rnage assignment.. E.g., in case of MM Module, generally, the PO, RFQS, etc.. are generated by it own (i.e., the no is assigned to it once you save the new PO, RFQ etc...) Or otherwise, incase u assign external number range, the new avaialable number will be taken from the interval and will be provided to the newly created document (E.g., MAterial, PO, RFQ , etc..)
    I hope i am clear.
    Please provide atmost points.
    thanks
    rams

  • Number Range RF_Beleg has reached critical limit

    Hi
    While doing the customer clearing in AR , I got the error as "Number Range RF_Beleg has reached critical limit ". Can anybody suggest me how to fix this error.it looks some allocated number range has exhausted.
    Thanks
    SN

    Hi Sathya,
           You may have to follow the following steps:
    i) You may know the document type of the document that generates this error, say DZ, Pls goto <b>OBA7</b> and note the Number Range defined for the same.
    ii) Having noted the Number Range, goto <b>FBN1</b>. Click on the <b>Change Status Button.</b>
    iii)  Locate the Co Code, Fiscal Year and the Number Range (That u got from Step i). Select that line and change the current number to zero.
    iv) Come back to the main screen of FBN1. Again click onto the <b>Change Interval Button</b>. Select the same record as in iii) and change the From & To Numbers. <b>The defined numbers should not overlap with any other number range for any other document type.</b>
    v)Save it.
    Try posting again.
    Hope this helps.

  • T code KANK - Number Range for CO

    Dear experts,
    When I create CO number range(T code KANK) for a controlling area and do a posting, system takes last document number and therefore I can only post one document at a time.
    Example: When I creat number range 1 to 100 and try to do FI posting with a CO object, system will take number 100 as the first document and hence I have to extend the number range again and again. It is ignoring the number range 1 to 99.
    I get the message as 'Number interval for transaction COIN in CO area 2000 is exhausted'
    Any solution to this problem?
    Thank you.
    Regards
    Paul
    Edited by: Paul01 on Dec 12, 2010 8:12 PM

    Hi,
    Check this post as well.  You may find it useful
    CO Document Number range issue
    Since you gave CO number range from 1 to 100 and the buffer in SNRO for object RK_BELEG is 100,  you are not able to create any additional CO documents. 
    One solution is to make sure you give sufficient number range intervals in KANK in order to avoid this.
    Thanks
    Ram

  • Number range issue for SD.

    Hi SAP experts,
    We have reached a point that all the number ranges [Transaction SNRO (type RV_BELEG)] allotted are exhausted/needed for the purpose to which it has been allocated. No we are in a situation that, we have no more sufficient ranges to allot to new roll-outs.Please suggest me your valuable solution for this issue.

    Hi,
    There are only two options left
    1.Create new number range object
    2.Archive the documents
    As far as possible stick to the first option.
    Reward points if helpful
    Regards,
    Amrish Purohit

  • MATERIAL TYPE NUMBER RANGE

    goodmorning dear friends,
    i am having a material type XXXX and along it a material type number range in created and assigned.
    now i want to delete that number range.
    i am doing this in quality.
    kindly help me in knowing how to delete the number range through spro screen step wise.
    regards,
    indranil

    Hi
    give the last number from the number range. system will undertsand as the number range is exhausted.
    say ur number range is
    300000 to 399999
    give the last number 399999 in the current field number
    Rajesh

Maybe you are looking for