Exibition of 0MATERIAL texts

Hi,
I hope somebody could help. I created a query which contains the 0material characteristic. All texts (medium texts) are in master data, but, the text doesn't appear in query. What I should try to fix this.
Thanks,
Marcel

Hi Marcel,
Have you tried the various options "display as" in the properties of the characteristic 0material in the query designer.
Sree

Similar Messages

  • How to display header title for 0MATERIAL texts in the query output?

    Dear Bwers,
    I have a requirement where i need to display headers titles for 0MATERIAL texts in the query output. (example "Material description"). Any ideas on how to do this?
    Thanks
    Raj

    Kamal,
    Its is as below:
    <b>Vendor</b>    <b>Vendor Name</b>
    1001 ---            Bright Industries
    1002 ---            Glow Industries
    I want to display the header title "Vendor Name" as the  title in the column instead of displaying the text without any header title.
    Thanks
    Raj
    Message was edited by:
            Raj Singh
    Message was edited by:
            Raj Singh

  • Error message uploading 0material text and attributes.

    Dear all,
    i have received an error message when uploading 0material text and attributes.
    Error message is as follows:
    RSDMD 194
    Data record 512 & with the key '000000000000000081T &' is invalid in
    value '000000000000000081 &' of the attribute/characteristic 0MATERIAL
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
    any help?
    thanks

    Hi john mcquade,
    Your error message says it all!
    You have your 0material with wrong info to be loaded, check your PSA the records with error (should begin in record 512) and see what is inserted as 0material (probably you're missing some zeros before the number).
    You could compare that record with another one (less than the record 512) to see an example of a material that has the right input and this one that exists here with errors.
    Diogo.

  • Variable on 0material text ?

    hello BW Experts,
    Is it possible to create a variable on 0material text ? The user needs to search in the material text .?
    Suggestions appreciated.
    Thanks,
    BWer

    Can we directly create a user entry variable on text ?
    is this feature available in BW ?
    please suggest.
    Thanks,
    BWer

  • 0Material Text Language issue

    Hi bi world,
    i focus on a issue: when i load 0_material_text the info package does not have data selection for the language field. it bi content. moreover only english data is transfered to the BI System. But i logged in with a different language.
    can anyone help me? Is there anywhere settings which set the text language?
    any advice is appreciated.
    fönk
    Edited by: Stefan Rettig on Aug 28, 2008 4:38 PM

    solved!
    Read SAP Note 302063
    in detail you need to add Correspondence Language in Programm RSCPINST.
    now it works!
    have a nice day
    fönk
    Edited by: fönk on Aug 31, 2008 8:59 AM

  • 0MATERIAL / ZMATERIAL TEXT field load failure

    Hi Guru's
    I am experiencing failures in my text attribute load to ZMATERIAL
    0MATERIAL TEXT is successful with the load.
    Mapping of TXTMD to 0TXTMD is working well as follows:
    R/3 Description:  FOIL RG N#09 GOLD 2 3/8" GA:50 F/PP. ROL to
    BW Decsription: FOIL RG N ¶09 GOLD 2 3/8" GA:50 F/PP. ROL
    0TXTMD is "attribute only" flagged on the general tab.
    ZMATERIAL is defined with attribute 0NAME40 as set as a NAV attribute.
    Content release 2.0/02 for 0NAME40
    Content release 3.0/02 for 0TXTMD
    I can determine no reason for the difference in handling by the  separate DTP's from PSA/ datasource to Infoobject.
    Workaround is the manual cleansing of the PSA record to remove the # character.
    Thank You ...... Dan

    But I am not able to check the box because its disabled
    and the conversion exit MATN1 is already maintained in 0material and evne i can find it in communication structure
    Regards
    Naveen

  • Masterdata text is missing .

    Dear Friends 
    when i am doing reporting on the 0material Text for material is  missing .  so  when i checked  the maintain master for 0material . the text was missing  where the language key was blank . after searching  i found out that they are two languages one is ZH and other is EN . in ERP  when they create a article they logon language was ZH , so in maintain master data  i changed the Language  key to ZH . then i was able to see the text . but when i keep EN or Blank  the text is not apperiang .
    So my question  is how can i get the text for the EN or when blank also . so should i untick language Dependent  in the infoobject . the user want language key  to be blank . so when they do the reporting they should be able to see the text when launage isblank . Please provide me with solution this urjent . please  do send your replies .
    Thankyou

    Hi,
    Like you mention, you can either remove the language dependent component of your infoobject. In this case, language key in your source system will remain unmapped (since all your text is maintained in ZH lang, so I don't think this would be much issue).
    Or in your transfer rules / transformation rules, you set 0langu to constant = 'EN'. So, the text maintaned in 'ZH' would be re-mapped to language = 'EN', which I assume is the default language for your BW setup.

  • BI Report Export Problem - Selection data missing

    Hi all,
    I´m pretty new to Web reports and now I have a problem which might be easy to solve for you experts.
    The problem appears when exporting a report. If the user exports the report to PDF or Excel, the data is exported correctly but the selection settings, that the user set, are missing. Only the field name are shown, but not the selected item. Its somewhat of a cosmetical problem, but important to the users.
    Interestingly enough, we use many other templates which have the exact same functionality and where it works correctly.
    I compared the XML on code on those templates, but there is no major difference.
    Here is the important code (at least in my understanding) of the template:
    <bi:param name="BUTTON_LIST" type="ORDEREDLIST">
                                      <bi:param name="BUTTON" type="COMPOSITE" index="1">
                                        <bi:param name="CAPTION" value="PDF">
                                        </bi:param>
                                        <bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
                                          <bi:param name="INSTRUCTION">
                                            <bi:command type="EXPORT">
                                              <bi:param name="ITEM_REF_LIST" type="UNORDEREDLIST">
                                                <bi:param name="ITEM_REF" index="1" value="TEXT_ITEM_9">
                                                </bi:param>
                                                <bi:param name="ITEM_REF" index="2" value="INFO_FIELD_ITEM_2">
                                                </bi:param>
                                                <bi:param name="ITEM_REF" index="3" value="ANALYSIS_ITEM_1">
                                                </bi:param>
                                              </bi:param>
                                              <bi:param name="FOOTER_LEFT" value="DATE">
                                              </bi:param>
                                              <bi:param name="FOOTER_RIGHT" value="PAGEOFPAGES">
                                              </bi:param>
                                            </bi:command>
                                          </bi:param>
                                        </bi:param>
                                      </bi:param>
    <bi:item name="INFO_FIELD_ITEM_2" designheight="50" designwidth="300" type="INFO_FIELD_ITEM">
                              <bi:param name="DATA_PROVIDER_REF" value="DP_1">
                              </bi:param>
                              <bi:param name="INFORMATION_ELEMENT_LIST" type="ORDEREDLIST">
                                <bi:param name="INFORMATION_TYPE" type="CHOICE" index="1" value="VARIABLE">
                                  <bi:param name="VARIABLE" value="IP_VERS_CM01" text="Plan Version">
                                  </bi:param>
                                </bi:param>
                                <bi:param name="INFORMATION_TYPE" type="CHOICE" index="2" value="CHARACTERISTIC_LIST">
                                  <bi:param name="CHARACTERISTIC_LIST" type="ORDEREDLIST">
                                    <bi:param name="CHARACTERISTIC" index="1" value="0G_CWW010" text="ProdGr">
                                    </bi:param>
                                    <bi:param name="CHARACTERISTIC" index="2" value="0MATERIAL" text="Material">
                                    </bi:param>
                                    <bi:param name="CHARACTERISTIC" index="3" value="0PROFIT_CTR" text="Planning Unit">
                                    </bi:param>
                                    <bi:param name="CHARACTERISTIC" index="4" value="469EIDJHD8W7F786UEL29ZJVV" text="Country Statement">
                                    </bi:param>
                                    <bi:param name="CHARACTERISTIC" index="5" value="ZXCO_NAV3__ZXCO_BUSN" text="BusSeg Nav">
                                    </bi:param>
                                  </bi:param>
                                </bi:param>
                              </bi:param>
                            </bi:item>
    Any input and hints are appreciated.
    Regards,
    Harald

    Hello Harald,
    As per my understanding, the particular characterisitc is not assigned and that could be the reason for displaying only field name. Please lookinto it.
    all the best,
    Kind regards,
    Praveen

  • Dynamic Lead Columns

    We have a requirement where users need to enter 3 Key figure values for 3 periods against 0MATERIAL.  The layout should show as follows:
    MaterailKeyFigureMonth1Month2Month3
    SKU1----KF125--20----20
    SKU1----KF25 USD-5 USD---6 USD
    SKU1----KF32---2-----2
    SKU2----KF150--15----5
    Planning level contains, 0MATERIAL, 0FISCPER3 and the three Key figures.  In the manual planning layout, I have selected "Key Figures in Lead Column" with 0MATERIAL in the lead column and 0FISCPER3 in the data column.  In the additional settings, I have chosen "From Transaction Data" and "Lead Columns Dynamic for" 0MATERIAL - Text Replacement "Key".  In the next step, I have entered the three key figures and checked the "Dynamic" checkbox.  In the data columns I have selected the required 0FISCPER3.  Executing this layout is resulting in a dump with the "MESSAGE_TYPE_X" C "SAPLUPP_PLAN" or "LUPP_PLANU05" "UPP_PLAN_COMPLETE_LAYOUT" and "layout_Corrupt".  What am I doing wrong here?
    I need the layout to show as represented above.  How do I achieve the desired result?  I will assign points for the helpful posts.

    Partially resolved.  It looks like I need to restrict 0MATERIAL in the planning level if I use "Dynamic" option!!  I have used the ROOT node of the hierarchy on 0MATERIAL in the planning level and I am able to open the template.  BUT THE MAIN PROBLEM IS STILL UNRESOLVED.  I want the layout to show
    HeadingMonth1Month2--Month3
    SKU1KF125--20----20
    SKU1KF25 USD-5 USD---6 USD
    SKU1KF32---2-----2
    SKU2KF150--15----5
    SKU2KF21 USD-3 USD---2 USD
    But it show up as follows:
    HeadingMonth1Month2--Month3
    SKU1KF125--20----20
    SKU2KF150--15----5
    SKU1KF25 USD-5 USD---6 USD
    SKU2KF21 USD-3 USD---2 USD
    I need to have the rows ordered by SKU and not by Key figures.  Hope my explanation is clear.  I will assign points to the helpful posts.
    PS - I can move Months into "Lead Columns" and "Key Figures" into Data Columns so that the Key Figures are there all by themselves, but that is not an option either.

  • Zero records added after dataload from texttable of 1 infoobject to another

    Hello,
    We are working on BI 7.0 (2004S)  but we still use BW 3.5 data flow.
    We have a requirement to load text data from one infoobject (0material) to another infoobject (0rt_confmat). The actual requirement was - Text table of  0material (/BI0/TMATERIAL) should  be added  to info-object 0RT_CONFMAT text table.)
    0rt_confmat is a navigational  attribute of 0material.
    I did the following steps to load this data using 2 methods. The data loads using both these methods are successful but zero records are added to the text table of 0rt_confmat.
    Method 1 :
    1. Text table of  0material (/BI0/TMATERIAL) cannot be added directly to info-object 0RT_CONFMAT text table.
    So a datasource ZTXTMATERIAL was created with text table  /BI0/TMATERIAL.
    2. Infosource, transfer rules and update rules were created. Changes were made to
    the info-object 0RT_CONFMAT to include its own text table according to the specifications given.
    Method 2:
    1.  created an export datasource for 0material and did the necessary steps such as replicating data source, creating infosource, update rules and transfer rules and infopackage.
    The problem is that the number of transferred records  is 16089 but 0 records are added to the text table of 0RT_CONFMAT.
    Records from text table are not getting loaded from
    I have searched sdn and sap notes but was unable to find a solution for this issue.
    Is it not possible to load data from the text table of a characteristic infoobject to the text table of its navigational attribute ?
    Please suggest a solution for this issue.
    Thanks and Regards,
    Radhika

    Hi All,
    Please refer below for replies to your questions
    Now I was to suggest the second approach:
    1. What have you set into the transfer structure, did you map 0rt_confmat with 0rd_confmat? -  I mapped it with 0material
    2. Do you see text elements in the transfer structure? -yes the text elements exist in the transfer structure
    3. As 0rt_confmat is an attribute of 0material, there is a possibility that for multiple material you may have same 0rt_confmat. In that case, your load may fail saying duplicate records.  - The data load is successful, but records are not added to the target.
    4. What is the data type for 0rf_confmat and 0material in your system? - Both are character strings
    On what basis are you loading the text from 0material to 0rt_confmat. -the key field 0material is mapped to 0rt_confmat
    Your problem seems to be the update rules / transfer rules from 0MATERIAL text table to 0RT_CONFMAT, that's why in your second method you have transfered values, but none were added.
    Remember that you have to have a key for 0RT_CONFMAT and the text for that key mapped through transfer rules, and I beleive that 0MATERIAL text table doesn't have the key for 0RT_CONFMAT, but has the key for 0MATERIAL. If you want both keys to be the same, then in your transfer rules map 0MATERIAL to 0RT_CONFMAT, and the text from 0MATERIAL to the text for 0RT_CONFMAT.
    Is that what you've done? - Yes, in the update rules 0material is mapped to 0rt_confmat and the text from 0material is mapped to text from 0rt_confmat. After reading your reply I mapped 0MATERIAL to 0RT_CONFMAT  it in the transfer rules as well, but still zero records are added.
    The data load is successful using both methods , but records are not getting added.
    Can you chk in RSA3 if the data is extracted for the datasoruce ZTXTMATERIAL?? - Yes, data gets extracted.
    ALso while you loaded the data, did you get the data in the PSA? - Yes data is seen in the PSA.
    Please suggest how I can proceed now.
    Thanks and Regards,
    Radhika

  • Attribute + key id

    Hey
    Is there a way to add key to attribute of infoobject
    for example
    0material (text)    ****      0material__attr1
    key   text
    10     car1     ****         car big
    20     car2     ****         car small
    i want to see
    0material__attr1
    10   car big
    20   car small
    Regards,
    P.

    I think about it but
    in this way I must add this new infoobject to all infocube and reload it.
    Is there another way??

  • Data Sources Technical Names Required

    Dear All,
    I want some Datasources like
    0CRM_MKTELM : CRM Marketing Element (Campaign and Marketing Plan)Hierarchy Datasource Required.
    0CRMFOCST : Forecast relevance flag for opportunity Text Required.
    0MATERIAL :  Datasrcs for Attr, Text Hier and Transaction Data Required.
    Thanks & Regds,
    SGiri

    Hi Giri
    For 0MATERIAL -
    Texts 0MATERIAL_TEXT
    Hierarchies
    0MATERIAL_LGEN_HIER
    0MATERIAL_LKLS_HIER
    0MATERIAL_LPRH_HIER
    Attributes 0MATERIAL_ATTR
    For 0CRM_MKTELM : http://help.sap.com/saphelp_nw04/helpdata/en/bf/3d1c3b7de6c244e10000000a11402f/frameset.htm
    for 0CRMFOCST
    No business content found- you will have to create generic datasource based on view of text tables.

  • Material length

    hi
    this is my scenerio
    my DS is 0material_text
    i am getting 0material, text and lanu
    at transfer rules 0 material is mapped with produect (char) with length 40. they have wirtten 1 rountine chnage length from 18 to 40 to target field.
    this infosource is assigned my cubes already uisng at production.
    now their requirement is in future they may create some more cubes . they need the infosource ( that material) lenthg will be same.
    they can use same infosource , they can write update routine for new cubes. they dont wnat like, they want field with 18 length at infosource level
    i suggested this solution
    create Z datasource (generic extraction withtext) assign this new ds to any new infosource and use this new infosource for  new cubes?
    please let me know my suggested solution is correct ?
    or please let em know any best solution is theer for this scenerio

    Hi Suneel......
    0material_text is a master data..............did u mean that u have used same infosource for both master data and transaction data.........but how.........as per my knowledge it is not possible.........
    Whatever....ur solution is ok........
    But u can do another thing...........u will include product infoobject in those infocubes......right........
    Now before transaction data we will load master data......Now u..........in the General tab page of the characteristic infoobject ........there is a option to create Transfer routine...........this routine is a global routine......and there u can write code to chnage length from 18 to 40 to target field............
    Here u hav to write code only once............but if u write it at infosource level..........it will be local.........infosource specific......
    Hope this helps.....
    Regards,
    Debjani.........

  • Need help with transfer routine.

    I am doing this enhancement in BW 3.5 version.
    There is an object in ODS - > ZPATHNM (Pathname)
    It gets data from ZPTDIR object.
    Now, 0MATERIAL infoobject has text data. For PATH type materials it has descriptions like pt/dat/fafg.2.0 , pt/dat/ovg.2c ... so on.
    The content after pt/dat/ for example fafq.2.0, ovg.2c is available in ODS object ZPATHNM (Pathname)
    Since I have to extract PATH material numbers. So I created another object ZPATHMAT and mapping it to ZPTDIR.
    I have to write a transfer routine when the 0MATERIAL text description had description beginning with pt/dat/ and the text after pt/dat/ is equal to data in ZPATHNM. i should get material number in ZPATHMAT.
    This is the transfer routine, I have written between ZPATHMAT  and ZPTDIR . This is working fine.
    Data : ZDIRNAM type String,
                ZCONT1 type string,
                ZCONT2 type string,
                ZMATERIAL(18) type C.
    ZDIRNAM = TRAN_STRUCTURE-ZPTDIR.
    IF ZDIRNAM is not Initial.
    Concatenate 'pt/dat/' ZDIRNAM into ZCONT1.
      Select single MATERIAL
        into ZMATERIAL from /BI0/TMATERIAL
    where TXTMD = ZCONT1.
    RESULT = ZMATERIAL.
      ENDIF.
    Now there is another requirement, where I have to create one more object, ZPATHDES. This object should get Material description for path type materials from 0PROD_HIER text table.
    This object, 0PROD_HIER is an attribute of 0MATERIAL.
    So the logic to get the material description into ZPATHDES, is when the material number in 0MATERIAL is equal to material number in  ZPATHMAT (generated from above routine), I should get description (TXTMD) from text table of 0PROD_HIER (/BI0/TPROD_HIER) into this ZPATHDES object.
    I able not to connect this logic in the code and it is throwing errors.
    I need help in coding.
    Thanks.

    Very hard to understand the logic in a thread. Can you please write your code, which is throwing errors? May be that will help us.
    Regards
    amandeep sharma

  • Error loading master data attr and text for 0material

    Hi gurus,
    I am new to BI, I am getting an error RSDMD- 194    when i am loading 0MATERIAL_ATTR and TEXT.
    It is showing for nearly 100 records in the error stack. 
    Can anyone explain some basics,
    1) why do we need to add 0MATERIAL to a particular Info area to start loading its ATTR and TEXT
    2) Are the info objects that appear in the attributes tab of 0MATERIAL the same as the fields of 0MATERIAL_ATTR datasource, basically what i don't understand is are we mapping the 0MATERIAL_ATTR datsource fields to the info objects appearing in the attributes tab of 0MATERIAL info object.
    3) Also when i added 0MATERIAL to my Info Area , there were some extra info objects that got in, are there any dependent objects that get added ?
    <removed by moderator>
    Edited by: Siegfried Szameitat on May 19, 2009 11:53 AM

    Hi,
    "Error RSDMD- 194 when i am loading 0MATERIAL_ATTR and TEXT.RSDMD- 194"
    Please check if there is any external characterstic in those 100 records, correct it and load again.
    1) why do we need to add 0MATERIAL to a particular Info area to start loading its ATTR and TEXT
    It does,t matter where the 0Material is. Info area in kind of Folder to easily locate and put the all the related objects at one place.
    2) Are the info objects that appear in the attributes tab of 0MATERIAL the same as the fields of 0MATERIAL_ATTR datasource, basically what i don't understand is are we mapping the 0MATERIAL_ATTR datsource fields to the info objects appearing in the attributes tab of 0MATERIAL info object.
    If it is a business content infosource, it will automatically map the attribute to data source field. If you are modifying or creating your own object, you should map it manually based on field name and description.
    3) Also when i added 0MATERIAL to my Info Area , there were some extra info objects that got in, are there any dependent objects that get added ?
    If you will move any objects all the compounded objects will also come to the info area.
    Regards,
    Kams

Maybe you are looking for