Exicse base value not captured

Hello Gurus,
I have created an STO. Subsequently delivered, invoiced and excise invoice has been created. During GR though excise duties are appearing but its base value is not appearing. i.e. BED, ECS and HSECS are appearing correctly but its base value is 0.
How can I capture the excise base value along with all the excise duties in the GR through MIGO?
Thanks & Regards
Piyush

Hi,
Before GR capture the excise invoice using J1IEX. This may help you. Otherwise you will have to check the config settings.
Regards,
Vishesh

Similar Messages

Wrong calculation in base value while capturing Excise IV(IMPORT)

Hi all,
any provision to correct base value while capturing EX IV for <b>imports</b>, in ECC 6.0
as note was released by sap for earlier versions.
will it hold good for this version also?
regards
Krishna

Hiii Santosh,,
After applying the Notes still the Excise Values are not captured??
Please tell if any other Notes to be applied???
Regards,
Kumar Rayudu

Base Value not changing in MIGO Excise Tab

Dear Gururs,
We are using MIGO to capture & Post Excise Invoice for our Import PO (PO type ZIMP). the problem is, when we change the qty in MIGO Qty tab, corresponding base value is not getting update in Excise tab. Please suggest a solution.

Hi,
If you are doing a MIGO for Import consignment, duties are flow from Invoice booked thru MIRO, so doutful if you can change corresponding base value in MIGO.
Regards,
Vikas

Base value not flowing in J1IEX

Hi All,
The Excise Base Value is not flowing in J1IEX. I am doing an STO. The other duties like BED, AED are flowing while capturing excise invoice, but not the Base value.
PLease let me know the settings to ensure the Base value flows in J1IEX.
Thanks.
Manish

Hi Chintu,
Please find the process for STO.
> > -2 Plants - 1 Supplying and 1 receiving
> > -Receving plant is created as customer in XD01
> >-Material is created in both the plants
> >-All the IMG settings are done both at MM and SD parts
> >-STO PO is created with doc.type "UB" in ME21n
> >-In VL10B OBD is created wrt PO number & PGI is also done here
> >-In VF01 commercial invoice is created (Here all the excise duties like BED, AED, SED are calculated and PR00 is statistical)
> >-Excise invoice is created wrt Commercial invoice
> >-Now in J1IEX I have to give both STO PO number and excise invoice number. When I give the excise invoice number, all the duties are flowing but when I give the STO PO number the BASE VALUE is not flowing.
Let me know if you require any more details from my end.
Regards
Ayyallas
Edited by: ayyallas on Nov 13, 2009 5:41 AM

In dealer Invoice , Excise duty values not captured from MIGO

In dealer invoice , I have changed excise duty values in MIGO . This is not captured in MIRO. But the system took excise value from default values ( from FV11 condition record ) . This is happening for New plants. Old plants works good.
Regards.,
Lakshmanan.S

hi,
create a PO with zero tax code. such that base amount is equal to the inclusive of all excise duties.
IN migo select the capture and post excise option, in the excise tab, activate the mrp indicator .
change the base value in the migo and manually enter the excise duties in migo, capture it and then post
create MIRO with reference to the PO and give the taxcode as V1(ED-8%CESS-2%HECESS-1%)instead of VO(ZERO TAX CODE)
Regards,
velu

Excise base value not updated

Dear all,
We have found that excise base value is not updated after creating excise invoices,later we corrected it,
excise base value started updating in table J_1IEXCDTL,
Intially for 2 months excise base value is not updated in table,
Is there any problem will arise in future ?
or
How to solve this issue ?
Jeyakanthan

Awaiting valuable replies.....
Edited by: Jeyakanthan A on Mar 6, 2010 5:36 PM

Base value not flowing in the table

Dear Experts,
It is noticed that while creating excise invoices in SAP of exempted goods the base value does not pass into relevant table J_1iexcdtl in transaction type DLFC.
Please provide any solution.
thanks in advance

Dear Experts,
It is noticed that while creating excise invoices in SAP of exempted goods the base value does not pass into relevant table J_1iexcdtl in transaction type DLFC.
Please provide any solution.
thanks in advance

VOFM Condition base value not updating(Urgent)

Hi All,
I have created a Condition Base Value 901 for Sales Order in Transaction VOFM.
Following is the code when I enter the Sorce text.
FORM FRM_KOND_BASIS_901.
*{   INSERT         DEVK901384                                        1
DATA: XXKOMV TYPE KOMV,
      XAKOMV TYPE KOMV,
      VKAWRT LIKE KOMV-KAWRT.
IF KOMP-VKAUS = 'YAB'.
XXKOMV = XKOMV.
CLEAR VKAWRT.
LOOP AT XKOMV INTO XAKOMV WHERE KSCHL = 'YIPR'.
IF XAKOMV-KAWRT > 0.
VKAWRT = XAKOMV-KWERT.
ENDIF.
ENDLOOP.
XKAWRT = VKAWRT.
CLEAR XKOMV.
XKOMV = XXKOMV.
ENDIF.
*}   INSERT
ENDFORM.
But this code is not updating the Condition screen for items condition value.
Regards
Vijai

no, the code contains the logic to determine the base value, then the value has to be passed to xkwert.
take some other base formula as template.
pls. rewad if helpful
Roberto

Condition Base Value not maching between R/3 screen and Database

Hi All,
We have been using the Condition Base Value KAWRT field in the datasource 2LIS_13_VDKOM (Billing Document Condition).
While reconciling the data in the underlying R/3 table KONV and the R/3 screen (VF03 transaction) and DS extracted data, we are seeing that sometimes the data in KONV is different by factors 10, 100 or 1000 etc from the value in the R/3 screen. We could not find any definite logic as to what should be the factor based on which situation.
We understand SAP does this shifting of decimals to increase the precision. But we need to determine the logic of using "which factor at what situation".
Has anyone faced this situation before, if yes...was a solution found?

We are infact looking at the decimals against currencies (TCURX), but sometimes the KMEIN field is blank against the transaction, usually the case when KRECH (Calculation type for condition) is B - Fixed Amount. Then we are failing to understand the logic used to determine the factor.
Any idea on that?

Values not capture during adobe form display on pa30.

Hi Experts,
I have attached Adobe Form into Transaction PA30 in which form values are not capturing during form display,
But its displaying at the time of form generation on ZHINUREQ_CORRS_LETTER program.
Kindly give suggestion.
Regards,
Abdul

Hi Saujanya,
This could by caused by the network, the used browser or additional browser plugins. Try to do the following:
1. Test with an alternative browser (if you are on a SP which supports different browsers than IE, see PAM, http://service.sap.com/pam): If it works with Firefox, then you know the problem is caused by IE and not by the OS, network, ...
2. Deactivate/uninstall all additional browser plugins/add-ons (like google toolbar, Yahoo toolbar, ...)
3. Create a client trace as explained in SAP note 999998. Maybe there's a hint in the trace. Watch for something like "ERROR".
4. Install a HTTP sniffer (like "fiddler") on both machines and compare the network traffic. Maybe there's a request with a 4xx HTTP status code?
5. How is the machine connected to your network? Is it behind an additional webproxy?
Hope one of this helps,
Ralf

DEEMED EXPORT duty values not captured in ARE3

HELLO
I am testing for deemed export scenario against CT3 form
As per requirement condition values JEX2 /JECS/JA1Y are amintained zero in sales document
hence zero duty is captured in excise invoice
while creating ARE3 document through tcode:J1A301 the base amount and duty rate is captured.
but duty values are zero.
Pls guide how can we capture duty vales in ARE3 document.
Rgds Mugdha

hi,
create a PO with zero tax code. such that base amount is equal to the inclusive of all excise duties.
IN migo select the capture and post excise option, in the excise tab, activate the mrp indicator .
change the base value in the migo and manually enter the excise duties in migo, capture it and then post
create MIRO with reference to the PO and give the taxcode as V1(ED-8%CESS-2%HECESS-1%)instead of VO(ZERO TAX CODE)
Regards,
velu

SAP BASIS: SU53 not captured

I am getting an authorization error message(03 Display access not available for company code ***) when executing the program Z***, clicking on help gives me the related object. when i check the Su53 dump it is not captured.
However the user has all the authrorizations for that object.
Can any1 let me know ahy the dump was not captured. have u faced these problems bfore. where and what was the soln.

You can use the transaction for the system trace, making a filter for the specific user in the back-end system.
The code of the transaction is ST01
Regards,
Sandro

Very urgent excise base value isnt captured to are1 and are3

dear sir,
in are1 and are3 documents base exicise value is nt being captured and higher edusess 1% too but BED and educess is captured ?can anybody help me ?is ita notes problem?

hi,
for the hiegher education cess not appearing i req u to chek ur pricing procedure if its there in the pricing proceudre and also to check the budget-07 settings also chek if u have checked mark AT1 in excise reg settings. follow--img-log gen-tax on goods mvmnt -india-baisc settings--maintain reg.
for teh secong search on service .sap.com. if you do not find nething tht meets ur need. write to SAP it may be cos of a program error.
saurabh

Deemed export duty values not captured in ARE3 DOCUMENT

HELLO
I am testing for deemed export scenario against CT3 form
As per requirement condition values JEX2 /JECS/JA1Y are amintained zero in sales document
hence zero duty is captured in excise invoice
while creating ARE3 document through tcode:J1A301 the base amount and duty rate is captured.
but duty values are zero.
Pls guide how can we capture duty vales in ARE3 document.
Rgds Mugdha
Edited by: Mugdha Patil on Feb 25, 2011 7:10 AM

Dear Atul,
in Deemed export after doing commercial invoice - capture the excise details in j1iin and click whether you are doing are3 with Licence. the values has to be there it must not be zero. After that you have to capture ARE3 in j1ia301.
if the value is not flowing in j1iin then your customizing has some problem ie in TAX on goods movement the basic setting - determination on excise duty you must have not maintained the default conditions for excise in your TAXINN or TAXINJ procedure,
Try this and let us know
regards,,
Sudhir

CVD Values Not Capturing in MIGO after Customs MIRO

Hi,
I am getting problem in Import procedure.
We created Import Purchase order as normal means Main Vendor in Foreign Currency and Customs Vendor in Indian Currency.We assigned same in PO.
After creating PO we did Customs MIRO in Indian Currency.
But at the time of Goods reciept System not defaulting BED(CVD) and E cess(e cess on CVd) and SHE(SHE on CVD)
but ADC is their.
In MIGO we entered Customs invoice Number.we are mentioned Excise default settings.We are using TAXINN.
ECC 6.SAP_APPL 11.
In my Import Pricing Procedure we are assigned Account key and accurals.
Please any body know the SNOTE number reply me.
Thankyou,
Raghu

Dear Raghu,
In case of Import I m facing problem.My base is coming wrong.
I am not getting the Value which I had entered in MIRO.
ADC isn't flowing.
In Imoprt pricing I have takne JADC & in Excise default I have maintained the condition also.
Can u p. tell me ,How did u resolve the problem ??
Regards
Biswajit

Exicse base value not captured

Similar Messages

Maybe you are looking for