EXIF and "Flash" field with Canon 1D mark III

Hi,
I have two Canon 1D mark III.
I'm shooting RAW without a flash attached to both cameras.
But if I look in Aperture in the EXIF data of the two cameras, then one camera is showing the value "16" in the "Flash" EXIF field the other is showing "0" as the value in the "Flash" EXIF field.
What does this field mean, why are there different values for the same shooting conditions?
Thanks
JO

Joachim Frey wrote:
But there was no flash on any of these two cameras, so how can this then be different?
Most cameras will let you change some flash settings whether there is a flash attached or not.
Ian

Similar Messages

PS5 will not open camera raw pictures...all made with Canon 5D Mark III and Canon 5D Mark II

PS5 will not open Camera Raw Pictures made with Canon 5D Mark III

What version of camera raw do you have? You should have at least 6.7 for PS to open Canon 5D Mark III raw images.

CS5 Raw with Canon 5D Mark III and Canon 6D

I have CS5. I recently upgraded my 5D Mark II to a 5D Mark III. I also have a 6D. I can't open my images in RAW. Am I forced to purchase CS6?

Hi,
You should be able to open the Canon 5D Mark III files into photoshop cs5 by updating to camera raw 6.7
(Help>Updates from within photoshop cs5)
For the Canon 6D, the 8.1 DNG converter should work by converting your 6D camera raw files to dng
copies which should then open in photoshop cs5.
mac:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5596
wndows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5597

Focus problems with Canon 1D Mark III

I have been having problems with my 1D Mark III, it take an unusually long time to focus. The problem is especially prevalent indoors. I am using a Canon 24 to 70 IS lens.

I have had the camera since it first came out, however I also aready had a Canon 20D at the time. I seemed to do better with the 20D. I recently bought a Canon 7D and it focuses much faster. I am very displeased with the 1D Mark III.
I am an experienced photographer, photography is a passion I have studied and pursued. The 20D was my first DSLR, prior to that I shot with a Nikon 2020 film camera.
The problem with the 1D Mark III is that it takes an unusually long time to autofocus. Due to this, I usually relied on the 20D. When I bought the 7D I retired the 20D and paired the new camera with he 1D for gigs (weddings, parties etc.). It is frustrating to attempt shots with the camera and have subjects wait for me to shoot.

Log and Transfer with Canon 5d mark iii footage on OS 10.5

FCP is not recognizing my SCDH card in the Log and Transfer window
and I'm wondering why this is.
I am running OS 10.5 - and there were no additional EOS drivers available
on Canon's website for my OS.
I am shooting with the new 5D mark iii. When I first got the Rebel T2i a few years
back, I had the same problem and installing the Canon driver worked to
get the card to show up in the Log and Transfer window.
Does anyone have tips for how to get my Log and Transfer window to recognize
a card from the 5D mark iii?
Thanks.

Hi, guys.
In my experience, the best native format is ProRes MOV while the 5D Mark III recorded file is H.264 MOV. So I have been using a H.264 to ProRes MOV Converter to help me change the 5D Mark III H.264 MOV files before importing to FCP on my iMac. I found the way from Google. The below is the link.
http://www.editavchdmac.com/convert-5d-mark-iii-mov-footages-to-prores-for-editi ng-in-fcp-x/
Thanks

RAW Processing problems with Canon 5D Mark iii

I am having problems with the RAW files coming from my new 5D Mark iii in Aperture. I have the latest version of Aperture (and update) installed. Selecting a picture style on the 5D doesn't seem to yield any results because when I import the photo into aperture all the images go very dark. I have to pull the exposure levels up all the way to get a decent exposure. The histogram on my camera looks perfect but when imported into Aperutre the histogram changes. I have my custom picture style set to give me a very flat image (contrast off, sharpening off, saturation -2, color tone 0). The images looks very flat and perfect in my LCD but once imported into aperture the RAW processing makes it very dark. I even tried shooting the exact photo in three completely different picture styles but they all look identical once they are in aperture. What's going on??

Here is a side by side comparison of a RAW image in the latest versions of Aperture and Lightroom. I have never had these issues with the 5D Mark II only the Mark III. As you can see Lightroom produces a nice flat image while Aperture is under-exposing the image. Any thoughts? I really want to continue to use Aperture but with my recent camera upgrade to the Mark III I don't see how this is possible. Anyones help would be much appreciated.

Restart and flashing finder with a question mark

Hi,
My mac just died and now i am using my sisters computer. I was typing up some documents and listening to music. The computer then proceeded to freeze which brought up the spinning beachball. After a few minutes of waiting for the computer to do its thing, nothing occured to i did a hard start up. Upon restart i came to a dark grey screen and a flashing finder logo and a question mark. i waited some more and got nothing. Ive managed to lose my rescue disc and im not quite sure what to do. is there anything i can do before i resort to apple services?

Oh that's not good. Is the other Mac also PowerPC based? I'm not sure about "compatibility" with those since I've never used an Intel-based Mac yet. At least, don't own one.
The Target Disk Mode-enabled computer should automatically show up as an external drive, whether it is bootable or not.
If it doesn't, then there must be some serious damage to the data on the drive, since it isn't being recognized by the other Mac.
I think your next step would be to use DiskWarrior if you have it, or borrow it from someone who does. It works wonders. I don't have it, but a colleague does, and I used it on a failing drive, and wow. I was able to save my data. I was able to successfully boot once after the repair, but on second boot, it failed again. So at least I was able to get my things off of the drive.
That would be the most important thing right now.
Also, because a drive doesn't boot (and Mac doesn't recognize it) doesn't necessarily mean the drive is bad. It just can't find the "commands" and data to let it start up and run the things on your drive. This is from experience. I have had a drive that would never boot, but the drive was fine. I had to reformat it thought and start from scratch in that instance. But the drive was not damaged. It had a bad block or partition in it.

RAW Processing with Canon 5D Mark iii

Since upgrading to Aperture 3.3.1 I started to notice a huge decrease in the sharpness of my images. I have checked previous threads and followed up on my Highlight Tone priority settings as well as Post Import Raw Process setting. Having messed around with both settings I have been unable to fix this issue. So I went ahead and downloaded a copy of Lightroom to test. Images imported into lightroom at full 1:1 previews are sharp as a tack. What could be causing my issue with Aperture. I do not want to have to switch but at this point I might not have a choice.
I am importing mRAW files without JPG and applying no Presets. The first time I click on the image it initially loads sharp and then after a split second it becomes "blurry"
Any one else seeing this issue still and have any advice?
Shooting with a Canon 5D MK3.
Thanks
Brad

Wish I had an answer here, but I will caution about mRAW files. I wouldn't use them, as they are the "red-headed stepchild" of RAW files. They are not true RAW files, and Aperture's support for them came much later than regular RAW files.
I'd recommend shooting regular RAW files and just deleting more of the non-keepers if space is an actual consideration.
Here's an article that goes into details (mostly on sRAW, but mRAW is the same thing, pretty much):
http://dougkerr.net/Pumpkin/articles/sRaw.pdf

Is elements 13 compatible with Canon 5d Mark iii raw files?

Just upgraded my camera and the raw files cannot be read on my current version of elements. Will Elements 13 be compatible - was thinking of upgrading to full photoshop but that now only seems to come in a monthly package! I really need someone to talk through my best options but there doesn't seem to be any customer service.

Photoshop elements 10 should be able to open those files if you update to camera raw 6.7
Which operating system are you using?
windows
Adobe - Photoshop Elements : For Windows : Camera Raw 6.7 update for Elements 10
mac
Adobe - Photoshop Elements : For Macintosh : Camera Raw 6.7 update for Elements 10
Also, photoshop elements 13 will open those files as well.

I cannot open .CR2 files - am using OS X Mavericks? The images were downloaded from a Canon 7D Mark III.

Hello,
My mother-in-law saved some pictures to my computer but I cannot open them in Lightroom or any other program that lets me edit them. They have a .CR2 extension and she uses a Canon 7D Mark III. Any tips? Thanks!

it's a special cannon file format
http://filext.com/file-extension/CR2
you will maybe require special canon software to open them
or you can try google
http://www.fileinfo.com/extension/cr2
more hits
open cr2 on mac

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

When i boot i get a flashing folder with a question mark. disk utility doesnt work or read my harddrives to boot with. i installed a new SSD and its not reading that either. i have a macbook pro 2011, any help?

So I came to this problem a while ago. M ycomputer basically froze so I was forced to shut down by holding the button down. When I started it up I got the flashing folder with a question mark. I started it up holding down the command and r keys which brought me to disk utility. Although my computer doesn't read that I have a hard drive to start it up. When I click on the disk utility app, I cannot verify or repair anything either. The buttons won't allow me to click on them. It also shows "Mac OSX Base System" which shows I have files and what not saved. I had been told that I need a new hard drive so I bought and manually installed a OWC SSD 240GB drive and when i booted the computer up it booted up yo the operating system fine with all my files and what not on there. After about twenty minutes, it froze again. I forced a shut down, restarted and the same thing happened. I am not able to choose my SSD to boot up, although thats probably because it doesn't have an operating system installed on it??
i have a Macbook Pro 13" 2011
any help would be great, I'm overall confused.

ryansaint11,
this isn’t Apple support; this is a user-to-user forum. We’re just fellow users of Apple products here.
If you want to boot from your SSD, then you should put the SSD where your HDD currently is, and put the HDD into the optical bay. (That setup will also get you the best performance.) At the moment, you’re still booting from your HDD. Note that you will need to format your SSD in Disk Utility [with the “Mac OS X Extended (Journaled)” format] so that you can install OS X onto it.
Since you have an Early 2011 model, it might or might not have originally come with grey installation DVDs. You will be able to find out whether it did or not by trying to use OS X Internet Recovery to install OS X onto your SSD. If it does not work, or if the installed OS turns out to be Snow Leopard, then it will have originally come with the DVDs, and you should purchase a replacement pair of DVDs from Apple or iFixit; those discs will have your MacBook Pro’s Apple Hardware Test and its iLife apps. If the installed OS turns out to be Lion, then it will not originally have come with the grey installation DVDs, and your Apple Hardware Test will be installed along with Lion, and your iLife apps will be downloadable from the Mac App Store.

My new mac mini (3 month) didn't start up,all that appeared was a white screen and a flashing folder with a question mark inside it.

My new Mac mini (3 month) didn't start up, all that appeared was a white screen and a flashing folder with a question mark inside it.
I followed by recommendations from 'Everything Mac': "shut it down by pressing and holding the power button for about 5 seconds.
Then hold down the Option key and press the power button again to start up the Mac mini. Keep holding down the Option key until
the Mac mini starts up."
But I got a Wi-Fi button only to chose and connect the local network. I connected to my network and I can't use this connection
becouse no icons.
Could you please help me?

Your Mini (running 10.6.4) should have come with grey-colored install disks. Now is the time to put them into service. Turn on your computer so that there is power to accept disk #1 into the optical drive. Once the disk is in the drive, shut off the computer by holding the start button down until it powers off. Then turn it on this time holding down the "C" key to make the computer boot from the disk. The question mark that you saw indicates that the computer cannot find a bootable volume. This can happen due to corrupted system files or an improper shutdown etc. Once you are in the "Installer" you can choose Disk Utility from the Utilities Menu in the menu bar. Use it to repair the disk and to see if that can solve your trouble.

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Power on the computer and insert the DVD immediately.
Hold down the 'C' key to boot from the Snow Leopard DVD.
http://support.apple.com/kb/ht1533
After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
You'll likely need to partition and format the new drive before it's recognized.
http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
(Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. Does any one know how I can get it to recover?

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? Thanks

I just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me..

EXIF and "Flash" field with Canon 1D mark III

Similar Messages

Maybe you are looking for