EXIF Info issue with Teleconverters

Hello everybody,
I think I have a problem with EXIF in Aperture (version 3.4.3) on my MacBook Pro (OS 10.8.3).
For photos taken with Canon lenses plus 1.4/2.0 Canon teleconverters both Camera Info and EXIF Info are displaing all the information correctly except for the TC which is missinig. The "+1.4x/+2.0x" is not displayed after the lens model name which, as I said, is correct. This wasn't happening in the past; older photos in the same library are still showing all the proper information.
However opening raw files with Preview, under the Canon tab in the More Info Inspector, I can see the name of the lens + TC. I've checked this both for a "new" photo (not working properly in Aperture) and an "old" one (ok in Aperture); therefore I think it's not an error within the raw files.
Does anyone have an idea for that and how to fix it?
Thank you very much.

Dear Umang,
It is very clear that when Condiyion Type is not maintained in VD52, there is no error. Ideally, Condition Type is not to be maintained in VD52, to avoid such issues.
Hence it is advisable to convince the client that it is not recommended practise to maintain Condition Type in VD52.
It is also recommended that along with a Abaper, debug and try to identify the root cause.
It is also possible that Condition type Maintained in VD52 and in Pricing Procedure is different.
Regards,
Rajesh Banka

Similar Messages

EXIF issues with LR

Hi,
I have noticed that LR1.1 strips some of the EXIF info from the exported JPEGs. For example, lens info is gone. This seems like a fairly critical issue to address -- when do you think it'll be fixed?
Thanks,
Alex

Alex,
I agree with you: with MakerNote preserved, we could know from where some image is comming...
There really is a mess in metadata (in general): exif, iptc, makernote, xmp, etc. -where many of them (tags) have equal/similar purpose (with different names). Which to maintain?
XMP is initiated by Adobe AFAIK.. still, if IPTC:City and XMP:City contain different values, LR will read City from IPTC (because it's older standard). There's no doubt, that XMP is more flexible to manage... where tags inside XMP are flexible too: you can create your own tag in XMP and write some value in it (for example: TripodUsed=Manfrotto). IMO photo tools should learn to deal with XMP.
Anyway, another good reason to preserve original files :-)
Bogdan

Issue with updating Security Info on my Microsoft ID

I am stuck in a vicious circle trying to sort an issue with my Microsoft account.
I need to remove an old, defunct, email address and add a load of new security info however, depending on whether the date format on the page I keep being directed to is UK or US, either the updates haven’t happened or they won’t
be happening until next month – which seems ridiculous!
I’m trying to sign up for a Windows Store developer account to publish a Windows 8 app. I’m using my MSDN subscription to register for this (for free) but there is a step I can’t get past because it insists on sending a code to
my old email address – to which I have no access. It is picking up this address from my Microsoft Account Security info – however, I updated this info weeks ago. This is the screen I see (I’ve blurred out some of it as it seemed foolish to publish all my security
info J
It says my old address will be removed on 03/04/2013 and my new info added on that same date. Does anyone know if this is UK date format 3rd April – in which case it’s a long wait or a US date 4th
March in which case it didn’t happen? I’ve tried phoning 5000 and the Microsoft Customer support lines but neither of them have a clue where to start. They just keep asking me if I’ve forgotten my password – which I haven’t.
Does anyone know how I can resolve this? My only option at the moment is to wait until 3rd of April and see if anything changes – which is not ideal.
Cheers,
Rob

Hello,
The Microsoft account forum has been retired and all account related questions must now be asked online
here.
Select the issue you need help with and fill out the requested details on the next page.
You need to be signed in with a Microsoft account to access the form. If you are unable to access your primary account, you can use an alternate account (if you have one) or create a new one at
https://signup.live.com
You can read further information about blocked accounts
here.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Was having issue with original 8G iphone showing 3.5G of "other" info

Was having issue with original 8G iphone showing 3.5G of "other" info stored on phone. I use multiple computers and at times sync with both and sync using mobileme account. After deleting extra text msg, emails, clearing history and cache in safari adn syncing was still there. Was able to resolve issue by syncing with BOTH computers! Have other iphones that sync with one of the computers. made sure to select sync, but uncheck items that do not want to have on my phone. did not have to sync photo's. now down to 400mb instead of 3.5G of other on phone! Was causing phone to run sluggish. only had 250mb of free space.

Deepa,
Okay, 3.0, not so old.
I am having this strange issue which few of the users are facing.
If you say that "few of the users" are having a problem, the implication is that not many users out of the whole are facing it and the stress is on the fact that it is such a minority. If, however, you say that "a few of the users" are having a problem, the implication is that although the affected users may be a small number in proportion to the whole, it is a problem nonetheless and this is the focus of the statement. But what is the point of either if there is in fact a technical problem consistently manifest? The statement should be more definitive, e.g., that all (100% of) users who do a particular action experience a problem consistently. I think that's what you want to say but I didn't see it stated. I will assume that to be the case.
As a developer I am not able to replicate the issue since whenever I click on edit and go the update page , the correct data is fetched.
Reading ahead, are you using the bookmarked URL? Why would you be unable to reproduce the problem if you do the very same thing?
The users use a bookedmarked URL for the report and this URL includes the session ID...
What authentication scheme is used? Is the session ID that is finally used for the request the same as that provided in the URL? In 3.0, I don't believe this should happen.
Is there a batch job (job 4001) that purges sessions? There should be. Query from dba_jobs.
Scott

Issue with Repeat Contact Info in Edit Screen

Hello!
I recently had to get a replacement for my Droid because the home keys stopped working. My replacement Droid was acting buggy and the screen would black out anytime I'd check voicemails and sometimes after placing a phone call. I called customer service today and the tech support guy had me do a factory data reset on the phone. Before I did it, I was instructed to export my contacts to my SD card, which I did. The screen issue seems to be resolved, but I have an issue with my contacts now. If I go into a contact and hit "edit contact", it will display three to four Google contacts for one person! Also, if I try to make a shortcut to direct dial a contact, it has the same contact and phone number listed 3-4 times for every phone number listed. (For example, my parents home phone is listed three times and so is their cell phone number.) Anyone know how to get rid of the repeat contact info? I have tried resetting the phone again, as well as separating contacts individually to no avail. Any help or advice is appreciated!

Here are the steps for deleting duplicate contacts. HTH!
From the home screen, touch the applications tab (located on the bottom of the screen).
Touch Contacts.
Touch the Contacts tab.
Touch Menu.
Touch the desired contact.
Touch Menu.
Touch Delete contact.
Touch OK.

[Lightroom Mobile] Date in Exif info are not correct.

i'm use Lightroom Mobile in Bangkok, Thailand on iPad with Ratina Display.
Device Date&Time setting..
But, in Lightroom Mobile App. wrong to show year in exif data..
how i to fix this issue?
Thank You.

Thank for help me, Geoff the kiwi
i use LRM in Thailand. time zone UTC+7
i try to see exif info in another app. and all show correct.
i shoot this photo on 13 Oct 2013 (year in my time zone is 2556)
Light Room 5.2 (on PC)
iPhoto (on iPad)
Filterstorm Neue (on iPad)
Lab (on iPad)
all app show the year correct. but, LRM not!!
and i send original file to your PM. but i don't send tiger picture to you. because i lose it original file
thank again.

Mysqlnd issues with php5, compile questions...

So, I am getting an error of "Not connected : mysqlnd cannot connect to MySQL 4.1+ using old authentication" when I try to connect Wordpress, locally, to a remote server because of php5 and snow leopard. I as told by my host to recompile php on my Macbook and running into all sorts of issues (config errors)... does anyone have a configure script I can use that will not run mysql though mysqlnd?

I fixed the bug per http://bugs.php.net/bug.php?id=49267
and
I complied php-5.3.1RC1 with
./configure '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' '--sysconfdir=/private/etc' '--with-apxs2=/usr/sbin/apxs' '--enable-cli' '--with-config-file-path=/etc' '--with-libxml-dir=/usr' '--with-openssl=/usr' '--with-kerberos=/usr' '--with-zlib=/usr' '--enable-bcmath' '--with-bz2=/usr' '--enable-calendar' '--with-curl=/usr' '--enable-exif' '--enable-ftp' '--with-ldap=/usr' '--with-ldap-sasl=/usr' '--enable-mbstring' '--enable-mbregex' '--with-mysql=/usr/local/mysql' '--with-mysql-sock=/var/mysql' '--with-mysqli=/usr/local/mysql/bin/mysql_config' '--with-iodbc=/usr' '--enable-shmop' '--with-snmp=/usr' '--enable-soap' '--enable-sockets' '--enable-sysvmsg' '--enable-sysvsem' '--enable-sysvshm' '--with-xmlrpc' '--with-iconv-dir=/usr' '--with-xsl=/usr'

Issue with PTO (Paid Time Off) quota generation

Hi All,
We have an issue with quota generation of PTO for our employees.
The issue goes like this:
We have a Paid time off for employees 5weeks( 200 hrs) for employees who have worked less than 5 years.
we have paid time off for employees 6 weeks ( 240 hrs) for employees who have worked more than 5 years.
we have the following logic that has to go in this config:
-- Our fiscal year starts on Feb 1st and ends on Jan end or Feb starts which has a full week of working days. ( ex: if 01/31/2012 falls on a Thursday the following Monday which has full 5 day working week would be the end of the fiscal year).
-- Depending on the working hours of the employees and the date of joining for the first year ( for new hires)0041 info type the eligibility gets varied and reduced. Ex( employees who joins on start of fiscal year and works 40hrs per week schedules is eligible for 200hrs of PTO. Employees who join in the month of august and works for 35 hrs per week ( i.e mid of fiscal year) would get 91 hrs of PTO.
I need to put this in the system. I am thinking this could be done with out tweaking PCR.I need help in configuring this in Absence quotas as to what are the things i need change in system config and how do i do it. Please help with some screen shots if possible. I really need this to get it done ASAP. Looking forward for help.
Thanks,
Chowdary.

We use TM00 schema. Can i call TS15 and TS 12 rules into TM00 acheieve my issue of quota entilements?
Iam doing this because my businees needs to see if an employee chages his work schedule from 40 to 30 or 20 etc.. the PTO has to vary accordingly.
As the minimum eligibility is to work for 20 hrs to avail the PTO days. If at any point the employee drops it under 20 he will not be eligible till he work any this >= 20hrs per month so the evaluation has to check periodically to update the quota availability.... I need help plz suggest ...

Issues with WebForm performance

Hi,
We had migrated a new application from UAT to PROD and we encounter webform performance issues with the following actions..
After login, the first form you open it is
always slow. After this you can switch from one form to another without a
delay.
Then once you change any data – the next time
you access a form it gets delayed.
The point to be noted is, it doesnt have any performance issues in the UAT environment and the configuration settings,essbase cache settings are all the same. We did try to move the EPM system to a new server to see if this is a hardware issue but no luck, the performance issues still exist. The consumption of the CPU/memory has been checked and it is proved that the form opening delay has nothing to do with lack of memory.
The JVM head settings is set up at 4GB which is infact higher than that of the UAT environment(2GB).
runs on Windows server2008,11.1.2.1.600 EPM serve, has planning,reporting,foundation on one server (32GB ram) and essbase on another server (32GB ram). Any help is appreciated.
Please find attached the planning logs below and there is nothing mentioned in the hyperionplanning error logs.-----------------------------------------------------------------------------------------------------------------------------------------------------------------
<Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Nov 5, 2013 8:05:44 PM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Nov 5, 2013 8:05:46 PM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<Nov 5, 2013 8:05:48 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 5, 2013 8:05:48 PM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Nov 5, 2013 8:05:48 PM CET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log is opened. All server side log events will be written to this file.>
<Nov 5, 2013 8:06:22 PM CET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Domain location is 'C:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Checking C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\registry_update.xml file
EPM_ORACLE_HOME: C:\Oracle\Middleware\EPMSystem11R1
Template for PLANNING#11.1.2.0: C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar
Dependencies for C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar: []
BPMUI shared webapp not referenced from PLANNING#11.1.2.0
Application name: PLANNING#11.1.2.0
Application source: HyperionPlanning.ear
Server name: Planning0
Server port: 8300
Server SSL port: 8343
Application context: HyperionPlanning
Registry product type: PLANNING_PRODUCT
Registry physical web application type: PLANNING_WEBAPP
weblogic.Name property is 'Planning0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for PLANNING#11.1.2.0
EPM_ORACLE_INSTANCE: C:\Oracle\Middleware\user_projects\epmsystem1
Physical Web App found
Web app already linked to some application server: false
The registry was not modifyed because it already containse all sturctures
Web app is already linked to the logical web app
No needs to run custom updater for PLANNING#11.1.2.0
loggingUpdatePLANNING.block file exist or the system is running in the Fusion mode, skipping logging.xml configuration
Planning locale: en_US
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of Planning.>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
<Nov 5, 2013 8:07:10 PM CET> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 21:12:27 CET 2002,
 To: Tue Mar 22 21:12:27 CET 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 127.0.0.1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on 0:0:0:0:0:0:0:1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.83.72.22:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.83.72.22:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Warning> <Server> <BEA-002611> <Hostname "WIPLPRD01.svc.unicc.org", maps to multiple IP addresses: 10.83.72.22, 0:0:0:0:0:0:0:1>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "Planning0" for domain "EPMSystem" running in Production Mode>
<Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
using java.library.path: C:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64;C:\Oracle\Middleware\EPMSystem11R1/bin;C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseRTC-64/11.1.2.0/bin;C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JROCKI~1\jre\bin;C:\Oracle\MIDDLE~1\JROCKI~1\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8
EPM_ORACLE_HOME (C:\Oracle\Middleware\EPMSystem11R1) is set from JVM property "EPM_ORACLE_HOME".
using Java property for Hyperion Home C:\Oracle\Middleware\EPMSystem11R1
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
Reaquired task list lease: Tue Nov 05 20:11:49 CET 2013: 1383678709156
Seeking ESAPI.properties
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\ESAPI.properties
Loaded 'ESAPI.properties' properties file
Seeking validation.properties
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\validation.properties
Loaded 'validation.properties' properties file
Seeking antisamy-esapi.xml
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\antisamy-esapi.xml
EnterData_Inner Processing Time:424
2013-11-05 20:14:47,454 INFO Thread-51 calcmgr.launch - Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
- Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
2013-11-05 20:14:54,066 INFO Thread-51 calcmgr.launch - Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
- Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
EnterData_Inner Processing Time:64
EnterData_Inner Processing Time:15
EnterData_Inner Processing Time:359
EnterData_Inner Processing Time:2
EnterData_Inner Processing Time:53
EnterData_Inner Processing Time:4
EnterData_Inner Processing Time:7
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
Setting HBR Mode to: 2
In lookupBRLWA()
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
HBR LWA Component = Default
Default HBR = http://WIPLPRD01.svc.unicc.org:19000/eas
In getDBDetails()
Found HBR product = ESSBASE_PRODUCT
In lookupBRLWA()
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
=2013-11-05 20:35:08,234 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
- Error retrieving user by identity
Embedded HBR initialized.
EnterData_Inner Processing Time:6
EnterData_Inner Processing Time:867
[Tue Nov 05 20:35:33 CET 2013] Planning successfully notified HBR repository.
EnterData_Inner Processing Time:7
2013-11-05 20:40:38,613 INFO Thread-67 calcmgr.launch - Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
- Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
2013-11-05 20:40:47,241 INFO Thread-67 calcmgr.launch - Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
- Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
EnterData_Inner Processing Time:44
EnterData_Inner Processing Time:2
EnterData_Inner Processing Time:525
EnterData_Inner Processing Time:1
Reaquired task list lease: Tue Nov 05 20:41:49 CET 2013: 1383680509246

I already replied there but it seems no moderator is willing to approve my reply so it never shows up.
So I'll try replying in here instead:
I never thought it could be an emulator issue, I thought I had done something wrong to begin with. So I take having performance issues with tiled layer is not a common problem I suppose?
I'm using MOTODEV SDK platform, A1200 model (motorola).

BW hierarchies issue with BOBJ Reporting tools

Hi All,
Brief about the requirement:
Our client was using Mainframe and other tools for their reporting. Now as they have planned to go for SAP, purchased SAP BW 7 and SAP BOBJ XI 3.1 for warehouse and reporting purposes.
Initial Road map planned for implementation was
o     to use Crystal for operational and formatted reporting
o     to use WebI for Ad hoc and interactive reporting
o     to use Xcelsius for Dashboards
Once we started analysing the requirements, we observed that client requires hierarchies extensively for reporting and they donu2019t want to compromise in that for reporting. At this situation we have explored the options and came to know from the SAP sites that BO got limitations in case of BW hierarchies. But we not able to articulate the what is the exact issue. Is it with only WebI or Crystal also?
What we have articulated is we cannot report the hierarchies in BO in terms of nodes - > Sub nodes -> sub nodes instead we can do as fixed columns. Please add me if i am missing anything else.
And also please let us know options. Options that we were thinking are Implement with BO XI 3.1 considering Advanced analysis tool then upgrade to BO XI 4.1.
Please suggest us, what is the BW & BO hierarchy issue and right tools to use.
Thanks & Regards,
Bala

Our client uses XI 3.2 but is experiencing issues with Hierarchical BEX queries returning blanks - the mdx is fine - just webi that seems to have a problem and I'm also trying to determine in exactly which instances this occurs.
XI 4.x supposedly resolves mots issues but here again details are not known.
I.e. hopefully someone can point to an info source that describes in more detail what issues are likely to occur re hierarchies and webi.

Issues with multiple things since Mavericks update

I installed the Mavericks update and since, I have been having multiple problems with different things on my MacBook Pro 13"
1. Printer issues: I have an HP officejet 6500 wireless printer (Officejet 6500 E709n Series), and now it's having major issues with printing, yet was working perfect prior to update. It will either cut out pages when printing PDF documents, or printing so slow that it has to take a break in between printing each document (an issue that all never occurred until update), to print documents back to back, it will stop after one document as though I have no other documents in queue to print, and pauses for an extremely long time (nearly a full minute, no exaggeration here, literally almost a full 60 seconds), something it's never done before this update. My Apps update even did an update to the HP software that is inside the Mac already to use printing (in other words, the mac doesn't need to have the HP software manually installed for it to work, it automatically sees the printer because it is connected to my wireless network just as my Macbook Pro which is also connected wirelessly to my network).
2. Internet issues: am now unable to click on certain links in safari that I was able to use prior to the update, yet they will open fine inside of firefox with no issues, yet I cannot always switch between two different browsers to perform task online (literally have to start all over inside firefox while in the middle of something in safari). Also lots of websites no longer work correctly and I have to constantly clear history and cookies to attempt to use certain sites, at times it will help, other times it wont work period, yet the same exact site will work perfect in firefox (which I do not use, only on my system for use on certain sites for school because in safari prior to the update, I would have issues with only the class site and some links not working at all, no spinning wheel, no errors, just nothing, no response of any kind, basically worse than what it was before the update). Another issue, hit Ctrl+a to select inside Safari and it highlights, but then when you click out of the highlight, it comes back on it's own several times without you hitting anything, just click inside the screen on a blank space (no links, etc) with touchpad.
3. System issues: My system is way slower than what it was prior to the update, click on things and it wont respond at all, then minutes later will eventually respond or pops up the spinning color wheel, which it either never responds or takes an extremely long time to respond. And no matter how much I restart, it doesn't help anything. Even just to sit doing nothing, no clicking or usage on the system, and the color wheel pops up.
4. Mail issues: Mail is now popping up completely blank messages that I have sent out, the person receives it with no issues, yet I cannot look at the message I sent neither in the inbox or the sent items when I need to look at them again, an issue not present prior to update. Also I an now having issues when receiving mail, sometimes it will check for mail and sometimes I have to manually click to make it check the server for mail, an issue not present prior to update as well.
As of now, since I have had the chance to used the system since the update, these are the issues I have had, yet haven't had the chance to check other things, so there may be other issues that are occurring that I'm not aware of at the moment. I knew it would be a mistake to do this "free" update and did so anyway and now having one issue after the next with each application I open to use.
Mac general info:
Mac is one year old, purchased brand new, no shareware programs of any kind installed.
Use for school and basic web surfing use.
Do not install any programs onto system that I'm unsure are safe (basically programs for/from school/school websites only, or from the Mac Apps store only), not even programs like Skype, nor any windows based programs of any kind.
Lots of free memory avail because I save everything onto external hard drives (purchased brand new as well, only 4months old) in case system crash occurs, only things on the system is Itunes music or pics from photo stream that sync to the system when Iphone connected.
Mac system info:
- Processor 2.5 GHz Intel Core i5
- Memory 4 GB 1600 MHz DDR3
- Graphics Intel HD Graphics 4000 1024 MB
- Software OS X 10.9
- Number of Processors:          1
- Total Number of Cores:          2
- L2 Cache (per Core):          256 KB
- L3 Cache:          3 MB

For those needing help fixing their system and putting it back to Lion or Mountain Lion, this is what I have done to eliminate all my issues in about an hour (depending on your internet connection).
Amazing thing, I just restored my computer back to Mountain Lion, and she's working perfect again, as I knew she would. E-mail popping into mailbox instantly as it should and did before the update, printer working fast as it was before update, no more freezing or glitches of any kind thankfully and finally. Here is the link that is through the Apple site to direct you on how to put your system back and get rid of Maverick's, that is assuming that is what you would like to do and also includes link for those wanting to try fixing the issue if that is your preference (most of this info is for those with mountain lion and some with the previousverisoin of OS X lion).
If you want to keep Maverick's here is a good post on the apple discussion board to help you out:
https://discussions.apple.com/docs/DOC-6161
If you just want to totally get rid of it and put back what you had before, this is the short version of how to do so:
https://discussions.apple.com/docs/DOC-3353
NOTE: This particular link has a lot of info on what to do for different situations, it is a bit lengthy, yet still very helpful.
OS X Mountain Lion: Reinstall OS X (direct from Apple support site, not someone else):
http://support.apple.com/kb/PH10763?viewlocale=en_US
OS X: About OS X Recovery (also from apple support directly and includes some instructions just the same as previous links above):
http://support.apple.com/kb/HT4718
Just in case you aren't sure what it will all look like as you are doing things, this is a link to show you a few pics of what you will see as you as you are going through the process, it can be helpful for those who aren't sure what they are doing or how to do things at all:
http://www.apple.com/osx/recovery/
This is a way to download the Mountain Lion disk info from the server
http://support.apple.com/kb/DL1433
I hope this helps someone, it was amazing for me and my system is working perfect again like it was, battery life is way better went from like 3 hours to like 5 (not on full charge by the way, after it sat for a while doing the online update which took a while so that's saying something alone, huge improvement). I plan to wait a while before attempting to reinstall Maverick's, long enough for them to fix the bugs.

Multiple Issues with Adobe Creative Cloud app.

I'm having multiple issues with the Adobe Creative Cloud app.
1. Neither Photoshop CC nor Prelude CC get past the 47% mark when installing. They constantly give me "Installation Failed" messages. When I click on "Learn More", I'm told that:
"Installation Failed
Errors during Installation.(7)
More Information"
So naturally, I click on More Information to get the following thrown at me (none of which I understand):
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ERROR: 12/01/13 13:16:06:425 | [INFO] | | OOBE | DE | | | | 6076 | ---------- CustomHook_Helperx64 ---- Start ---------- 12/01/13 13:16:06:426 | [ERROR] | | OOBE | DE | | | | 6076 | Cannot load function name 'CSInstallerCustomHookProc' from library C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0 ERROR: System check returned with error : -4 -------------------------------------------------------------------------------------
2. I installed Lightroom 5, then uninstalled it. When I went back to re-install it, the Adobe Creative Cloud app wouldn't let me. It states that my Lightroom 5 is "Up to date" and is in my "Your Apps" section, not in the "Find New Apps" section. I've double checked my Programs and Features in Control Panel, and it's not there. I cleaned my registry, and it's still there. I deleted the "opm.db" file in my OOBE folder, and restarted CC - still nothing.
I've got to say, guys. I'm not very happy with the amount of time I've spent just trying to install programs on my PC. While the plan is for this to be intuitive at some point, it's not very functional at the moment. Any help you can provide me would be amazing - if you can provide it sooner than later, I'd be over the moon.
Thanks.

I fixed it. I fixed it on my own. My journey took over a week (forty hours of back and forths, trial and error, and service!!) and included multiple calls, multiple online chats, unanswered forum posts, Twitter conversations with the Adobe Customer Service team, remote access sessions with Adobe technical teams, and finally this series of emails. In the end, I had to figure it out myself. I'm not happy - not with the time it took, and not with the level service I received based on the urgency that I made clear.
For anyone else that had this issue (or similar), here is what I did to fix it. This may seem excessive, but that's because I didn't know what else to do. Some of these steps may be redundant, or not required... but I wouldn't know because once I saw that it was working, I just kept going.
Anyway, here is the solution I came upon (I'm running Windows 7 64-bit):
1) I uninstalled every single Adobe product (including Flash Player, Acrobat Player, Air, and Digital Editions).
2) I ran the Cleaner Tool (which is not very good) and came across errors in trying to delete certain folders.
3) I restarted my computer in Safe Mode, and logged into Windows 7 under my Administrator account.
4) I manually went into every folder that contained the words "Adobe" and deleted everything. This includes my Program Data folder, my Program Files folders (both x86 and 64-bit), my AppData folders, my Roaming folders, my Temp folders - ANYTHING and EVERYTHING that contained any trace of Adobe, I deleted.
5) I ran Microsoft Disk Cleanup and Piriform CCleaner to clean my registry and temp files.
6) I restarted my computer using the normal boot process and logged into Windows as Administrator.
7) I downloaded the Adobe Creative Cloud installer.
8) I restarted my computer again, and logged into Windows as Administrator.
9) I ran the Creative Cloud installer, and installed Premiere Pro.
10) I restarted my computer again, and logged into Windows as Administrator.
11) I ran the Creative Cloud installer, and installed Photoshop.
12) I restarted my computer again, and logged into Windows as Administrator.
13, 14, 15...) I ran the Creative Cloud installer and installed whatever programs I needed, then I IMMEDIATELY restarted my computer before installing anything else.
Hope this helps. Good luck!

Issues with setting "Album Artist" in iTunes 9.2.5.1 on Windows 7

I googled this for a while but haven't been able to find this issues mentioned anywhere else yet. Here's what's happening: I am importing CDs to iTunes 9.2.1.5 on Windows 7 Pro (64 Bit) using MP3 Encoder > Higher Quality. All is well except for a few CDs where I'd like to set an overall Album Artist. Example: Tony Bennett's Duets: An American Classic. When importing the CD it shows up under "Various Artists" since "Artist" is always Tony Bennett plus whoever he sings with. To make sure the album shows up under Tony Bennett in the library I click on the album and set "Album Artist" to Tony Bennett. That, however results in changing the "Artist" field as well now so all fields say Tony Bennett, which shouldn't happen, "artists" should stay unchanged. I tried this with several albums and the behavior is always the same.
I also tried the back door by going into the actual folder of the album in Windows then change the MP3 details and populate "Album Artist" there for all tracks within the album. Once I re=open iTunes it registers the change only for the first track but not the rest. So I re-import the folder into iTunes and then it does take "Album Artist" and also leaves "Artist" unchanged but for some reason has now lots of numbers under "Comments". There seems to be a mismatch of the field attributes between iTunes and Windows for MP3 files (possibly other formats as well). Wondering if anyone else has observed this or if I am just missing some setting.

FYI iTunes handling of ID3v2.4 tags seems to have some issues as well... Translating genres into their numeric codes for one thing. I'd recommend sticking with v2.3.
I'm not exactly sure from your posts what you were seeing. Was the artist being changed in Get Info. after you'd set Album Artist, or was it changing elsewhere on screeen? iTunes 9(.1 I think) added an option *View > Column Browser > Use Album Artists*. Unfortunately this doesn't change the heading of the column so that you "see" it is now only listing album artists but that's what it does.
There is also an occasional issue with the current build in that sometimes changes to Album Artist or Sort Album Artist fail to be reflected properly in the column browser until iTunes is closed and reopened.
tt2

Windows 7 Pro DNS issue with static IP

0
down vote
favorite
I have been unable to solve a DNS problem I am having as follows:
I have a Windows 7 Professional (64 bit) computer running VirtualBox with a couple of Windows XP guests (not sure if this bit is relevant). After heavy file copying/transfer on both of the Windows XP machines, both the guest machines AND the host loose anything
DNS related, so I cannot call anything by name, but by direct IP works fine. The only resolution is to reboot the (host) machine and it will then work OK for a while until it happens again. The only trigger to make it seem to happen quicker is to re-initiate
the heavy file transfer and this then causes the DNS resolution to stop working again.
The machine has a fixed IP address, so it isn't related to DHCP.
I've tried the machine connected wired and wireless, no difference.
The IP settings are manual and I have tried giving it the DNS settings of the router (normal settings) and I have also tried giving it Google's DNS servers (8.8.8.8 & 8.8.4.4). No difference.
It seems to happen (sooner) during heavy traffic.
Other Windows 7 machines in the network work fine (though they are Home version, not Pro).
ONLY DNS fails, direct IP works OK.
Reboot seems only solution at the moment.
I am now lost as to what to try to resolve this issue, I do not really want to reload Windows 7 as it is a relatively new install... I have read about issues with wired connections on my router (BT Home Hub 2.0) so tried a wireless connection, still the
same.
Here is my ipconfig /all (it shows the BT Home Hub router DNS settings, but it also failed with Google's 8.8.8.8 and 8.8.4.4 entered here and also with the routers 192.168.1.254 (default).
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\G>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : e1
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 30-85-A9-AD-07-81
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::59f:484a:827f:42ba%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.87(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 238060969
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-39-2B-4D-30-85-A9-AD-07-81
DNS Servers . . . . . . . . . . . : 217.32.171.21
213.120.234.30
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter VirtualBox Host-Only Network:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter
Physical Address. . . . . . . . . : 08-00-27-00-28-56
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8d2d:7418:381b:8dc0%15(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.56.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 336068647
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-39-2B-4D-30-85-A9-AD-07-81
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{486D4DCC-9CB7-417E-A796-596E0E6B1D54}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{67455999-75A5-436E-9EAC-12B093363132}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Users\G>
Any ideas where to look, or what other info to provide for any assistance?
Many thanks in advance.

Hi,
This has just happened again, here is the content of the netstat results as requested...
If I kill the VirtualBox virtual machines, it starts working again. It is as if there are no ports left, but I am not occupying that many? Surely Windows 7 can cope with this?
I feel I am missing something important, but cannot put my finger on it...
Further below, I have re-run the netstat command AFTER I have closed the VirtualBox machines and the system works OK.
netstat results DURING ISSUE:
Active Connections
Proto Local Address          Foreign Address        State           PID
TCP    0.0.0.0:21             0.0.0.0:0              LISTENING       1444
[FileZilla Server.exe]
TCP    0.0.0.0:25             0.0.0.0:0              LISTENING       1692
[MESMTPC.EXE]
TCP    0.0.0.0:80             0.0.0.0:0              LISTENING       4
Can not obtain ownership information
TCP    0.0.0.0:110            0.0.0.0:0              LISTENING       1660
[MEPOPS.EXE]
TCP    0.0.0.0:135            0.0.0.0:0              LISTENING       752
RpcSs
[svchost.exe]
TCP    0.0.0.0:143            0.0.0.0:0              LISTENING       1524
[MEIMAPS.exe]
TCP    0.0.0.0:445            0.0.0.0:0              LISTENING       4
Can not obtain ownership information
TCP    0.0.0.0:1221           0.0.0.0:0              LISTENING       4796
[VirtualBox.exe]
TCP    0.0.0.0:2199           0.0.0.0:0              LISTENING       4820
[VirtualBox.exe]
TCP    0.0.0.0:3306           0.0.0.0:0              LISTENING       1756
[mysqld.exe]
TCP    0.0.0.0:3389           0.0.0.0:0              LISTENING       1104
CryptSvc
[svchost.exe]
TCP    0.0.0.0:6901           0.0.0.0:0              LISTENING       4636
[WinVNC.exe]
TCP    0.0.0.0:6901           0.0.0.0:0              LISTENING       4636
[WinVNC.exe]
TCP    0.0.0.0:8300           0.0.0.0:0              LISTENING       3464
[sc_serv.exe]
TCP    0.0.0.0:8301           0.0.0.0:0              LISTENING       3464
[sc_serv.exe]
TCP    0.0.0.0:8360           0.0.0.0:0              LISTENING       3080
[sc_serv.exe]
TCP    0.0.0.0:8361           0.0.0.0:0              LISTENING       3080
[sc_serv.exe]
TCP    0.0.0.0:9022           0.0.0.0:0              LISTENING       4804
[VirtualBox.exe]
TCP    0.0.0.0:9023           0.0.0.0:0              LISTENING       4804
[VirtualBox.exe]
TCP    0.0.0.0:9080           0.0.0.0:0              LISTENING       4804
[VirtualBox.exe]
TCP    0.0.0.0:10001          0.0.0.0:0              LISTENING       4828
[VirtualBox.exe]
TCP    0.0.0.0:10002          0.0.0.0:0              LISTENING       4828
[VirtualBox.exe]
TCP    0.0.0.0:10003          0.0.0.0:0              LISTENING       4828
[VirtualBox.exe]
TCP    0.0.0.0:10011          0.0.0.0:0              LISTENING       4780
[VirtualBox.exe]
TCP    0.0.0.0:10012          0.0.0.0:0              LISTENING       4780
[VirtualBox.exe]
TCP    0.0.0.0:10013          0.0.0.0:0              LISTENING       4780
[VirtualBox.exe]
TCP    0.0.0.0:25566          0.0.0.0:0              LISTENING       3648
[TerrariaServer.exe]
TCP    0.0.0.0:30001          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30002          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30003          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30004          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30005          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30006          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30007          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30020          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30021          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30039          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30080          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30081          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30082          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30083          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30084          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30085          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30086          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30087          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30088          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30089          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30090          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30091          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30092          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30093          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30094          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30095          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30096          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30097          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30098          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30099          0.0.0.0:0              LISTENING       4788
[VirtualBox.exe]
TCP    0.0.0.0:30101          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30102          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30103          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30104          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30105          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30106          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30107          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30108          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30109          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30110          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30111          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30112          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30113          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30114          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30115          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30116          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30117          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30118          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30119          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30120          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30121          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30139          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30180          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30181          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30182          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30183          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30184          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30185          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30186          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30187          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30188          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30189          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30190          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30191          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30192          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30193          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30194          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30195          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30196          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30197          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30198          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30199          0.0.0.0:0              LISTENING       4812
[VirtualBox.exe]
TCP    0.0.0.0:30201          0.0.0.0:0              LISTENING       4796
[VirtualBox.exe]
TCP    0.0.0.0:30239          0.0.0.0:0              LISTENING       4796
[VirtualBox.exe]
TCP    0.0.0.0:33306          0.0.0.0:0              LISTENING       4796
[VirtualBox.exe]
TCP    0.0.0.0:49152          0.0.0.0:0              LISTENING       440
[wininit.exe]
TCP    0.0.0.0:49153          0.0.0.0:0              LISTENING       880
eventlog
[svchost.exe]
TCP    0.0.0.0:49154          0.0.0.0:0              LISTENING       1000
Schedule
[svchost.exe]
TCP    0.0.0.0:49156          0.0.0.0:0              LISTENING       508
[lsass.exe]
TCP    0.0.0.0:49157          0.0.0.0:0              LISTENING       500
[services.exe]
TCP    0.0.0.0:49158          0.0.0.0:0              LISTENING       3048
PolicyAgent
[svchost.exe]
TCP    127.0.0.1:8361         127.0.0.1:49364        ESTABLISHED     3080
[sc_serv.exe]
TCP    127.0.0.1:14147        0.0.0.0:0              LISTENING       1444
[FileZilla Server.exe]
TCP    127.0.0.1:14147        127.0.0.1:49162        ESTABLISHED     1444
[FileZilla Server.exe]
TCP    127.0.0.1:49162        127.0.0.1:14147        ESTABLISHED     3156
[FileZilla Server Interface.exe]
TCP    127.0.0.1:49212        127.0.0.1:49213        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49213        127.0.0.1:49212        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49214        127.0.0.1:49215        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49215        127.0.0.1:49214        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49216        127.0.0.1:49217        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49217        127.0.0.1:49216        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49218        127.0.0.1:49219        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49219        127.0.0.1:49218        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49220        127.0.0.1:49221        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49221        127.0.0.1:49220        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49222        127.0.0.1:49223        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49223        127.0.0.1:49222        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49224        127.0.0.1:49225        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49225        127.0.0.1:49224        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49226        127.0.0.1:49227        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49227        127.0.0.1:49226        ESTABLISHED     4288
[java.exe]
TCP    127.0.0.1:49364        127.0.0.1:8361         ESTABLISHED     3100
[Instore_Radioboss.exe]
TCP    192.168.1.87:139       0.0.0.0:0              LISTENING       4
Can not obtain ownership information
TCP    192.168.1.87:3389      217.156.134.12:22971   ESTABLISHED     1104
CryptSvc
[svchost.exe]
TCP    192.168.1.87:8360      81.148.248.221:1026    ESTABLISHED     3080
[sc_serv.exe]
TCP    192.168.1.87:25565     0.0.0.0:0              LISTENING       4288
[java.exe]
TCP    192.168.1.87:50644     37.139.0.151:8233      ESTABLISHED     4796
[VirtualBox.exe]
TCP    192.168.1.87:51019     81.27.96.46:21         TIME_WAIT       0
TCP    192.168.1.87:53126     192.168.1.86:445       ESTABLISHED     4
Can not obtain ownership information
TCP    192.168.1.87:60462     192.168.1.86:445       CLOSE_WAIT      4
Can not obtain ownership information
TCP    192.168.1.87:65029     37.139.0.151:8231      ESTABLISHED     4796
[VirtualBox.exe]
TCP    192.168.56.1:139       0.0.0.0:0              LISTENING       4
Can not obtain ownership information
TCP    [::]:21                [::]:0                 LISTENING
1444
[FileZilla Server.exe]
TCP    [::]:25                [::]:0                 LISTENING
1692
[MESMTPC.EXE]
TCP    [::]:80                [::]:0                 LISTENING
4
Can not obtain ownership information
TCP    [::]:135               [::]:0                 LISTENING
752
RpcSs
[svchost.exe]
TCP    [::]:445               [::]:0                 LISTENING
4
Can not obtain ownership information
TCP    [::]:3306              [::]:0                 LISTENING
1756
[mysqld.exe]
TCP    [::]:3389              [::]:0                 LISTENING
1104
CryptSvc
[svchost.exe]
TCP    [::]:30239             [::]:0                 LISTENING
4796
[VirtualBox.exe]
TCP    [::]:49152             [::]:0                 LISTENING
440
[wininit.exe]
TCP    [::]:49153             [::]:0                 LISTENING
880
eventlog
[svchost.exe]
TCP    [::]:49154             [::]:0                 LISTENING
1000
Schedule
[svchost.exe]
TCP    [::]:49156             [::]:0                 LISTENING
508
[lsass.exe]
TCP    [::]:49157             [::]:0                 LISTENING
500
[services.exe]
TCP    [::]:49158             [::]:0                 LISTENING
3048
PolicyAgent
[svchost.exe]
TCP    [::1]:14147            [::]:0                 LISTENING       1444
[FileZilla Server.exe]
UDP    0.0.0.0:123            *:*
964
W32Time
[svchost.exe]
UDP    0.0.0.0:500            *:*
1000
IKEEXT
[svchost.exe]
UDP    0.0.0.0:3702           *:*
964
EventSystem
[svchost.exe]
UDP    0.0.0.0:3702           *:*
964
EventSystem
[svchost.exe]
UDP    0.0.0.0:4500           *:*
1000
IKEEXT
[svchost.exe]
UDP    0.0.0.0:5355           *:*
1104
Dnscache
[svchost.exe]
UDP    0.0.0.0:53274          *:*
4780
[VirtualBox.exe]
UDP    0.0.0.0:53727          *:*
4788
[VirtualBox.exe]
UDP    0.0.0.0:54111          *:*
4828
[VirtualBox.exe]
UDP    0.0.0.0:54112          *:*
4828
[VirtualBox.exe]
UDP    0.0.0.0:54113          *:*
4780
[VirtualBox.exe]
UDP    0.0.0.0:55421          *:*
964
EventSystem
[svchost.exe]
UDP    0.0.0.0:58596          *:*
964
EventSystem
[svchost.exe]
UDP    0.0.0.0:59838          *:*
4812
[VirtualBox.exe]
UDP    0.0.0.0:62498          *:*
4796
[VirtualBox.exe]
UDP    127.0.0.1:1900         *:*
4172
SSDPSRV
[svchost.exe]
UDP    127.0.0.1:55045        *:*
4172
SSDPSRV
[svchost.exe]
UDP    192.168.1.87:137       *:*
4
Can not obtain ownership information
UDP    192.168.1.87:138       *:*
4
Can not obtain ownership information
UDP    192.168.1.87:1900      *:*
4172
SSDPSRV
[svchost.exe]
UDP    192.168.1.87:55043     *:*
4172
SSDPSRV
[svchost.exe]
UDP    192.168.56.1:137       *:*
4
Can not obtain ownership information
UDP    192.168.56.1:138       *:*
4
Can not obtain ownership information
UDP    192.168.56.1:1900      *:*
4172
SSDPSRV
[svchost.exe]
UDP    192.168.56.1:55044     *:*
4172
SSDPSRV
[svchost.exe]
UDP    [::]:123               *:*
964
W32Time
[svchost.exe]
UDP    [::]:500               *:*
1000
IKEEXT
[svchost.exe]
UDP    [::]:3702              *:*
964
EventSystem
[svchost.exe]
UDP    [::]:3702              *:*
964
EventSystem
[svchost.exe]
UDP    [::]:4500              *:*
1000
IKEEXT
[svchost.exe]
UDP    [::]:5355              *:*
1104
Dnscache
[svchost.exe]
UDP    [::]:55422             *:*
964
EventSystem
[svchost.exe]
UDP    [::]:58597             *:*
964
EventSystem
[svchost.exe]
UDP    [::1]:1900             *:*
4172
SSDPSRV
[svchost.exe]
UDP    [::1]:55042            *:*
4172
SSDPSRV
[svchost.exe]
UDP    [fe80::59f:484a:827f:42ba%11]:1900 *:*
4172
SSDPSRV
[svchost.exe]
UDP    [fe80::59f:484a:827f:42ba%11]:55040 *:*
4172
SSDPSRV
[svchost.exe]
UDP    [fe80::11a6:2283:bc40:c0cb%16]:1900 *:*
4172
SSDPSRV
[svchost.exe]
UDP    [fe80::11a6:2283:bc40:c0cb%16]:55041 *:*
4172
SSDPSRV
[svchost.exe]

Design issue with the multiprovider

Design issue with the multiprovider :
I have the following problem when using my multiprovider.
The data flow is like this. I have the info-objects IobjectA, IobjectB, IobjectCin my Cube.(Source for this data is s-systemA)
And from another s-system I am also loading the masterdata for IobjectA
Now I have created the multiprovider based on the cube and IobjectA.
However, surprisingly join in not workign in multiprovider correctly.
Scenario :
Record from the Cube.
IObjectA= 1AAA
IObjectB = 2BBB
IObjectC = 3CCC
Records from IobjectA =1AAA.
I expect the record should be like this :
IObjectA : IObjectB: IObjectC
1AAA       :2BBB       :3CCC
However, I am getting the record like this:
IObjectA : IObjectB: IObjectC
1AAA       :2BBB       :3CCC
1AAA         : #             :#
In the Identification section I have selected both the entries for IobjectA still I am getting this error.
My BW Version is 3.0B and the SP is 31.
Thanks in advance for your suggestion.

May be I was not clear enough in my first explanation, Let me try again to explain my scenario:
My Expectation from Multi Provider is :
IObjectA
1AAA
(From InfoObject)
Union
IObjectA     IObjectB     IObjectC
1AAA     2BBB     3CCC
(From Cube)
The record in the multiprovider should be :
IObjectA     IObjectB     IObjectC
1AAA     2BBB     3CCC
Because, this is what the Union says .. and the Definition of the multiprovider also says the same thing :
http://help.sap.com/saphelp_bw30b/helpdata/EN/ad/6b023b6069d22ee10000000a11402f/frameset.htm
Do you still think this is how the behaviour of the multiprovider.. if that is the case what would be the purpose of having an infoobject in the multiprovider.
Thank you very much in advance for your responses.
Best Regards.,
Praveen.

EXIF Info issue with Teleconverters

Similar Messages

Maybe you are looking for