EXIF Information while in Safari?

Is there any way (via customization or add-in) to allow Safari to display EXIF information from a jpeg photograph? I know that I could safe the image and load it into iPhoto or use some other piece of software (like CocoView) but I was curious if there's any way to access the EXIF information from directly within Safari (e.g., like being able to option-click on an image).
Thanks.

I don't know how in safari, but you can in firefox.
http://ted.mielczarek.org/code/mozilla/fxif/

Similar Messages

  • Retaining image rotation information (exif?) while resizing/scaling

    I have written the following routine to resize/scale down JPG files:
    BufferedImage src = ImageIO.read(source);
    BufferedImage dest = new BufferedImage(destWidth,destHeight,
    BufferedImage.TYPE_INT_RGB);
    Graphics2D g = dest.createGraphics();
    AffineTransform at = AffineTransform.getScaleInstance( (double)destWidth/src.getWidth(), (double)destHeight/src.getHeight());
    g.drawRenderedImage(src,at);
    ImageIO.write(dest,"JPG",targetFile);The code does it's job, but during the rezise process some information is lost, example: Photos that were taken vertically (camera rotated 90 degrees) appear as if they were taken horizontally, all EXIF information is also lost (perhaps rotation info is stored as exif?)
    Question: How do I preserve this information during resizing?
    Thanks :)
    Edited by: GeirGP on Sep 11, 2009 5:13 PM

    [This thread|http://forums.sun.com/thread.jspa?threadID=5398197&tstart=45] might be of interest to you.

  • Missing EXIF information on Export

    Hi Everyone,  have just purchased the Canon CP800 Photo Printer for my Mac,   seems as if I can't print any photo from my Aperture 3 library (All the pictures I own are in A3)   The problem,  and its been around for a while .. according to the various communities on the net, is missing EXIF information in the exported JPEG's
    Is there a solution to this ?  or is this a problem for Canon as this printer joes does not see Jpeg's with missing EXIF.
    Thanks everyone.
    Woodynet.

    Hi Frank,  yes a couple of surprises here,  the First being the Canon Photo Printer CP800 requires some sort of EXIF data on the Pictures in order for it to display on the printerss LCD and therefore enable you to print,  I have found many discussions around this topic,  it relies on certain EXIF data,  likely because you can perform basic enhancements before printing so I guess the printer needs to know something about the image,   by removing the SD Card out of the camera and straight into the printer I can print a picture,   the same picture transfered from Aperture 3 (Latest patches)  to the SD card (Same folder structure) the picture does not appear,  this Picture has had NO adjustments applied to it via Aperture,
    The Problem clearly is with Aperture,  it does not export EXIF data (well some anyway),  seems a few people have this problem with A3 so just wondering when Apple might be planning to fix the problem since all my photo's are now in A3,   very frustrating and the experience was very un apple like.   any suggestions would be handy,  as I plan to return the printer in the next couple of days.   will call canon support soon.
    Cheers

  • My iMac freezes while using safari.  I have Mavericks installed

    Several times my iMac freezes while using Safari. Only way to get out is to do a hard shut-down by holding the start button.  Any ideas?  Version of Maveriks is 10.9.2
    Mel

    Hardware Information:
              iMac (21.5-inch, Late 2009)
              iMac - model: iMac10,1
              1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
              8 GB RAM
    Video Information:
              ATI Radeon HD 4670 - VRAM: 256 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 0 days 1:31:41
    Disk Information:
              APPLE HDD HUA722010CLA330 disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 999.35 GB (803.35 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              OPTIARC DVD RW AD-5680H 
    USB Information:
              Apple Inc. Built-in iSight
              Apple Internal Memory Card Reader
              Western Digital My Passport 0748 1 TB
                        EFI (disk1s1) <not mounted>: 209.7 MB
                        disk1s2 (disk1s2) <not mounted>: 999.83 GB
                        Boot OS X (disk1s3) <not mounted>: 134.2 MB
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
              LaCie d2 quadra (button) 800mbit - 800mbit max
                        disk2s1 (disk2s1) <not mounted>: 32 KB
                        LaCie (disk2s3) /Volumes/LaCie: 1 TB (19.21 GB free)
    Thunderbolt Information:
    Kernel Extensions:
              com.intego.netbarrier.kext.monitor          (653)
              com.intego.netbarrier.kext.process          (653)
              com.intego.netbarrier.kext.network          (653)
              com.intego.virusbarrier.kext.realtime          (772)
              net.kromtech.kext.AVKauth          (2.3.6 - SDK 10.8)
              net.kromtech.kext.Firewall          (2.3.6 - SDK 10.8)
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.google.keystone.daemon.plist 3rd-Party support link
              [System] com.intego.commonservices.daemon.integod.plist 3rd-Party support link
              [System] com.intego.commonservices.daemon.taskmanager.plist 3rd-Party support link
              [System] com.intego.commonservices.icalserver.plist 3rd-Party support link
              [System] com.intego.commonservices.metrics.kschecker.plist 3rd-Party support link
              [System] com.intego.netbarrier.daemon.logger.plist 3rd-Party support link
              [System] com.intego.netbarrier.daemon.monitor.plist 3rd-Party support link
              [System] com.intego.netbarrier.daemon.plist 3rd-Party support link
              [System] com.intego.netupdate.daemon.plist 3rd-Party support link
              [System] com.intego.virusbarrier.daemon.emlparser.plist 3rd-Party support link
              [System] com.intego.virusbarrier.daemon.logger.plist 3rd-Party support link
              [System] com.intego.virusbarrier.daemon.plist 3rd-Party support link
              [System] com.intego.virusbarrier.daemon.scanner.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
              [System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
              [System] com.zeobit.MacKeeper.AntiVirus.plist 3rd-Party support link
    Launch Agents:
              [System] com.google.keystone.agent.plist 3rd-Party support link
              [System] com.intego.commonservices.integomenu.plist 3rd-Party support link
              [System] com.intego.commonservices.taskmanager.plist 3rd-Party support link
              [System] com.intego.commonservices.uninstaller.plist 3rd-Party support link
              [System] com.intego.netbarrier.alert.plist 3rd-Party support link
              [System] com.intego.netupdate.agent.plist 3rd-Party support link
              [System] com.intego.virusbarrier.alert.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
              [System] com.trusteer.rapport.rapportd.plist 3rd-Party support link
              [System] com.wacom.pentablet.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] ca.indev.MailTagsHelper.agent.plist 3rd-Party support link
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [not loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist 3rd-Party support link
              [not loaded] com.zeobit.MacKeeper.Helper.plist 3rd-Party support link
              [not loaded] ws.agile.1PasswordAgent.plist 3rd-Party support link
    User Login Items:
              Garmin Lifetime Map Updater
              iTunesHelper
              TextExpander (3.1.1)
              FaceTime
              EvernoteHelper
              Fantastical
              Dropbox
              AdobeResourceSynchronizer
              EvernoteHelper
              IntegoStatusItemHelper
    Internet Plug-ins:
              o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
              WacomNetscape: Version: 1.1.0-4 3rd-Party support link
              Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 3rd-Party support link
              OfficeLiveBrowserPlugin: Version: 12.3.4 3rd-Party support link
              WacomSafari: Version: 1.1.0-4 3rd-Party support link
              Silverlight: Version: 4.1.10329.0 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
              iPhotoPhotocast: Version: 7.0
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
              CANONiMAGEGATEWAYDL: Version: 3.2.0.1 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Safari Extensions:
              1Password: Version: 3.9.20
              Evernote Web Clipper: Version: 6.1
              AdBlock: Version: 2.6.18
              Open in Internet Explorer: Version: 1.0
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
              RocketLifeCmp: Version: (null) 3rd-Party support link
              UploadManager: Version: (null) 3rd-Party support link
              WebEx64: Version: 1.0 - SDK 10.5 3rd-Party support link
              WebEx: Version: 1.0 3rd-Party support link
              RocketEngine: Version: (null) 3rd-Party support link
              ContentManager: Version: (null) 3rd-Party support link
              CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
    3rd Party Preference Panes:
              PenTablet  3rd-Party support link
              Flash Player  3rd-Party support link
              Flip4Mac WMV  3rd-Party support link
              Java  3rd-Party support link
              MacFUSE  3rd-Party support link
              Trusteer Endpoint Protection  3rd-Party support link
    Old Applications:
              /Users/[redacted]/Downloads
                        NoteBook-4:          Version: 3.1.7 - SDK 10.5 3rd-Party support link
                        NoteBook-5:          Version: 3.1.8 - SDK 10.5 3rd-Party support link
                        NoteBook-6:          Version: 3.1.8 - SDK 10.5 3rd-Party support link
                        NoteBook-2:          Version: 3.1 - SDK 10.5 3rd-Party support link
                        NoteBook:          Version: 3.0.15 - SDK 10.5 3rd-Party support link
                        NoteBook-3:          Version: 3.1.2 - SDK 10.5 3rd-Party support link
                        NoteBook-7:          Version: 3.1.9 - SDK 10.5 3rd-Party support link
                        NoteBook-1:          Version: 3.0.10 - SDK 10.5 3rd-Party support link
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              Meeting Center:          Version: 12.27.23.0 - SDK 10.5 3rd-Party support link
                        /Users/[redacted]/Library/Application Support/WebEx Folder/1124/Meeting Center.app
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              NoteBook:          Version: 3.1.9 - SDK 10.5 3rd-Party support link
              Family Tree Maker:          Version: 19.2.4 - SDK 10.5 3rd-Party support link
              Garmin Lifetime Map Updater:          Version: 2.2 - SDK 10.5 3rd-Party support link
              /Applications/Microsoft Office 2011
                        Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              Network Recording Player:          Version: 2.2.0 - SDK 10.5 3rd-Party support link
                        /Users/[redacted]/Library/Application Support/WebEx Folder/500/Network Recording Player.app
              /Applications/Microsoft Office 2011/Office
                        Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              Garmin Map Update:          Version: 4.5.1 - SDK 10.5 3rd-Party support link
                        /Users/[redacted]/Library/Application Support/Garmin/Garmin Map Update/tmp/Garmin Map Update.app
              /Users/[redacted]/Library/Application Support/WebEx Folder/1224
                        Cisco WebEx Meeting Center:          Version: 11.24.32.0 - SDK 10.5 3rd-Party support link
                        asannotation2:          Version: 8.25.31.0 - SDK 10.5 3rd-Party support link
                        atmsupload:          Version: 4.14.29.0 - SDK 10.5 3rd-Party support link
                        convertpdf:          Version: 1.2 - SDK 10.5 3rd-Party support link
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              /Library/Application Support/Microsoft/MERP2.0
                        Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                        Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 930.71 GB Disk used: 182.53 GB
              Destinations:
                        LaCie [Local] (Last used)
                        Total size: 931.39 GB
                        Total number of backups: 90
                        Oldest backup: 2012-07-26 15:05:23 +0000
                        Last backup: 2014-04-06 18:34:11 +0000
                        Size of backup disk: Adequate
                                  Backup size 931.39 GB > (Disk used 182.53 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   6%          mds
                   3%          AntiVirus
                   2%          EtreCheck
                   2%          WindowServer
                   0%          ocspd
    Top Processes by Memory:
              270 MB          Safari
              229 MB          AntiVirus
              164 MB          mds_stores
              156 MB          com.apple.IconServicesAgent
              131 MB          MacKeeper Helper
    Virtual Memory Information:
              3.53 GB          Free RAM
              2.76 GB          Active RAM
              950 MB          Inactive RAM
              802 MB          Wired RAM
              676 MB          Page-ins
              0 B          Page-outs

  • I'm using macbook and i want to upload videos in vimeo, they informed me that safari 5.1 is no longer supported. what should i do? please advice, thank you!

    i'm using macbook and i want to upload videos in vimeo, they informed me that safari 5.1 is no longer supported. what should i do? please advice, thank you!

    If there is an indication of minimum specification in browser support, flash player plugin or other limits that have recently been changed, those should be available from Vimeo support.
    The expectation of several things to be continued in an older OS X such as Leopard 10.5.8, has been showing its age and various browsers supporting that system online are fewer now. Safari has no upgrade version for this old of OS X. You may be able to use a different web browser to see if it would work.
    There may be a later version of Flash that could work, or maybe not. A few browsers may do OK, I have a version of SeaMonkey (not the PPC version) in my MacBook1.1, running in Leopard 10.5.8. The last version of FireFox is no longer updated, but I have that too. The iCab browser (shareware) may do OK, you can test it since it runs freely w/o license.
    For overall better web experience, you may need to look into the MacBook specifications and consider an upgrade to both the OS X system (buy/install retail Snow Leopard 10.6 DVD -- then download Combo Update 10.6.8 v1.1) and see if the computer can support more chip RAM installed. Of course if the hard disk drive is running full, make an external archive of your created content and a backup before considering upgrading the OS X and any applications.
    With Snow Leopard 10.6.8, you have better browser support, newer Flash player plugin, and a few features that may be better for your overall experience with the MacBook. However it may ask for more resources than a basic Leopard 10.5.8 system, generally most reviews appear to be good. I have a MacBook1.1 (mid-2006) coreduo 1.83GHz model; it can run Snow Leopard 10.6.8 as a last upgrade & nothing further for mine.
    While OS X 10.6.8 is a portal to attempt further OS X upgrades via Mac App Store, etc, the hardware of the early older MacBook may find better usefulness left at Snow Leopard. If you have several older applications written for PPC hardware (they run under Rosetta, an option in Snow Leopard no longer available after it) you may choose to keep the upgrade path at OS X 10.6.8 Snow Leopard even if there is a hint your MacBook could be upgraded to, say, Lion 10.7.5. You'd lose support for older applications not written to Universal or PPC.
    Good luck & happy computing!

  • IMac freezing up while using Safari

    My iMac freezes up sometimes while using Safari and even trying to force quit doesn't help because the computer is totally frozen up.
    I have left my Activity Monitor open and when it froze again today I was able to see that the system memory seems to be the problem area.
    I see the following under System Memory:
    Free          almost nothing (here's the problem)
    Wired        1.09 Gb
    Active        2 Gb
    Inactive      3.9 Gb
    Why is the ratio between Free and Inactive memory so high?
    When the computer eventually unfreezes the Free memory returns to about 4 GB, seems where it should be.
    Wondering what could be using the Free memory ?

    You have a lot of issues.
    A.
    To remove the Codec-M spyware, first back up all data, then select
    Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. For any extension with a name you don't recognize, select it and click Uninstall. If in doubt, delete all extensions.
    If you use Firefox or Chrome, take the corresponding steps in those browsers. You might have to delete Chrome completely and reinstall it from a fresh download.
    Triple-click anywhere in the line of text below on this page to select it:
    ~/Library/LaunchAgents/com.codecm.uploader.plist
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open with a file selected. Delete the selected file. Then do the same with this line:
    ~/Library/Application Support/Codec-M
    Finally, this:
    /Applications/Codec-M.app
    This time you may be prompted for your administrator password.
    Log out and log back in.
    B.
    Remove "MacKeeper" as follows.
    "MacKeeper" is a scam with only one useful feature: it deletes itself.
    Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
    If you have incompletely removed MacKeeper—for example, by dragging the application to the Trash and emptying—then you'll have to reinstall it and start over.
    IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
    In the Finder, select
    Go ▹ Applications
    from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
    ☞ Quit MacKeeper before dragging it to the Trash.
    ☞ Don't empty the Trash. Let MacKeeper delete itself.
    ☞ Don't try to drag the MacKeeper Dock icon to the Trash.
    C.
    Remove "Rapport" by following the instructions on this page.
    D.
    Remove "Eltima Player," which is garbage.
    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and (unless otherwise specified in this comment) I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
    Back up all data before making any changes.
    You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.
    E.
    If your ISP is not StarHub Cable Vision in Singapore, you need to change your network settings. Ask for instructions.
    F.
    Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock all your user files, reset their ownership, and remove their access-control lists. If you've set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.
    G.
    If you still have problems after all the above, remove "SurfEasy."

  • Computer locks up while running safari

    I have an MAC running 10.9.2 mid 2010 - computer locks up while running safari - I have reset safari - not sure what else I could do to fix the problem - at least once a day I have to restart my mac

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V. Please include the BOOT_TIME message at the end of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report—it will be very long and not helpful.

  • New Mac, fresh install of Mountain Lion When I click to open a .Pdf from a web page,while in Safar, I get a black window Nothing opens in Preview or in Acrobat No option to download

    New Mac, fresh install of Mountain Lion
    When I click to open a .Pdf from a web page,while in Safar, I get a black window
    Nothing opens in Preview or in Acrobat
    No option to download

    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type of copy paste the following:
    /Library/Internet Plug-Ins
    Click Go. If you see this file:  AdobePDFViewer.plugin
    Drag it to the Trash, empty the Trash.
    Quit and relaunch Safari.

  • How do I open a PDF document from a website while in Safari on my iPad.

    How do I open a PDF document from a website while in Safari on my iPad.

    When you see a PDF link in Safari, click on it. It will preview in Safari. Then click the Share icon, and choose Open With, then select Adobe Reader.

  • I am having sound issues with Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmated. I can hear samples of audio books in the store section.  Any ideas?

    I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section.  Any ideas? I have reset Safari.  Website works fine on Firefox.

    I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section.  Any ideas? I have reset Safari.  Website works fine on Firefox.

  • IPhoto 6 and Exif information?

    Hi All,
    My first posting since switching from Windows, so please take it easy on me?
    I have a reasonable large digital photo collection from my old PC. I have imported this into iPhoto and allowed iPhoto to copy the images to its folder so it can take care of them. All of this so far has worked well.
    I have a question about the Exif information within the actual picture files.
    Before the images are imported into iPhoto, from Finder, I can do a “get info” on them and it will tell me information about which camera manufacture, model, etc… However, after importing in to iPhoto, again from Finder, this information is no longer available. But you can see this information from within iPhoto.
    Does this mean that the import process has “changed” the files and maybe removed the Exif tags copying them in to the iPhoto database (or something?).
    Thanks in advance.
    Ady.
    20" iMac (2GHz Intel Core Duo, 2GB RAM)   Mac OS X (10.4.6)   4GB iPod Nano (Black)

    Ady:
    Welcome to the Apple Discussions. I'm not able to duplicate that stripping of the EXIF data. All that gets changed in the info window is the size, lost 0.2 MB out of 1.8 in size, and the "Last Opened" time was different. Now this is in the Info window brought up by Command+I in the finder. The files are from a Canon PowerShot S400.
    Actually there was one bit of info lost. The file had a keyword associated with it and it did no show up on the edited version of the files in iPhoto but did show up on the original file in iPhoto.
    Interesting to note is that if I do an edit, like a rotate, the only info that changes is the size. Again, another 0.2MB is lost. Then do some red eye removal and we gain back 0.1MB. Very strange. But the EXIF info is retained throughout.

  • How can i reload font information while the jvm is running.

    l.s.
    how can i reload font information while the jvm is running.
    I'm having the following problem...
    A program is running.
    A user installs a new font on the system (Xwindows in this case)
    Java doesn't display the font when i ask :
    java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment().getAvailableFontFamilyNames();Thus i think that java buffers its font information somewhere. Anyone knows how to refresh te buffer?
    many thanks

    ungalcrys, welcome to the forum. Please don't post in threads that are long dead and don't hijack another poster's thread. When you have a question, start your own topic. Feel free to provide a link to an old post that may be relevant to your problem.
    I'm locking this thread now.
    db

  • While in safari I cannot scroll a category!?!?

    While in safari I often cannot scroll. For instance I just downloaded pinterest and when I want to pin something I can only pin what is showing in the category window, but cannot scroll further down to my other categories that are not showing.  The only time I can scroll further is when a scroll window pops up. Is there something in my settings that I am missing?

    If it is a window within a web page, try using 2 fingers to scroll.
    Stedman

  • How to maintain EXIF information when exporting

    I've recently posted 2 photos on Flickr, afterhaving edited them in LR5. 
    Suddenly, might EXIF information is not showing under Addition Info.  I haven't altered anything in my Flickr settings. 
    Someone has suggested it could my export settings in LR.  Could you tell me how I find these?

    Brilliant!  That worked, just did a test run.  Thank you so much!  I don't know what happened before because  can't remember altering anything befor exporting.  Anyway, I know what to do now, thanks.

  • Powerbook crashes while using Safari

    Hi, My Powerbook G4 keeps crashing while using Safari. Not everytime I use it but a few times a day...enough to be irrating. I'm including a problem report. I've done some housekeeping...up to reinstalling the system software. Thanks much for any help.
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000409C4008 PC=0x0000000000034A70
    Latest crash info for cpu 0:
    Exception state (sv=0x3C86A780)
    PC=0x00034A70; MSR=0x00001030; DAR=0x409C4008; DSISR=0x40000000; LR=0x00034A5C; R1=0x17593D70; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x000326E0 0x00032BD8 0x002CEFE4 0x000A9894
    Proceeding back via exception chain:
    Exception state (sv=0x3C86A780)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x2D022C80)
    PC=0x9522AC28; MSR=0x0000F030; DAR=0xE00BF000; DSISR=0x42000000; LR=0x9522AB1C; R1=0xBFFFE320; XCP=0x00000400 (Unknown code)
    Kernel version:
    Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x003DD520 0x002DA030 0x006C59C8 0x0050FC08 0x0050AE28 0x0050A8D8 0x0050A590 0x0050A054
    0x0050AA78 0x0050A444 0x005102CC 0x002CFF1C 0x002D0090 0x002CEFE4 0x000A9894
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleKauaiATA(1.2.1f4)@0x6c3000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x479000
    dependency: com.apple.iokit.IOATAFamily(1.6.0f2)@0x504000
    com.apple.iokit.IOATAFamily(1.6.0f2)@0x504000
    Proceeding back via exception chain:
    Exception state (sv=0x3C86A780)
    PC=0x00034A70; MSR=0x00001030; DAR=0x409C4008; DSISR=0x40000000; LR=0x00034A5C; R1=0x17593D70; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x000326E0 0x00032BD8 0x002CEFE4 0x000A9894
    Exception state (sv=0x2D022C80)
    PC=0x9522AC28; MSR=0x0000F030; DAR=0xE00BF000; DSISR=0x42000000; LR=0x9522AB1C; R1=0xBFFFE320; XCP=0x00000400 (Unknown code)
    Kernel version:
    Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPCModel: PowerBook5,3, BootROM 4.7.0f2, 1 processors, PowerPC G4 (1.1), 1.33 GHz, 1 GB
    Graphics: ATI Mobility Radeon 9600, ATY,RV350M10, AGP, 64 MB
    Memory Module: SODIMM0/J20STANDARD, 512 MB, DDR SDRAM, PC2700U-25330
    Memory Module: SODIMM1/J23REVERSED, 512 MB, DDR SDRAM, PC2700U-25330
    AirPort: AirPort Extreme, 404.2 (3.90.34.0.p16)
    Modem: LastDash, UCJ, V.92, 4.0, APPLE VERSION 2.6.6
    Bluetooth: Version 1.7.0f18, 2 service, 1 devices, 1 incoming serial ports
    Network Service: Built-in Ethernet, Ethernet, en0
    PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
    Parallel ATA Device: MATSHITADVD-R UJ-816,
    Parallel ATA Device: Hitachi IC25N080ATMR04-0, 74.53 GB
    USB Device: Hub, , Up to 480 Mb/sec, 500 mA
    USB Device: USB2223, SMSC, Up to 480 Mb/sec, 500 mA
    USB Device: Hub, , Up to 480 Mb/sec, 500 mA
    USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
    USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
    USB Device: Hub, , Up to 480 Mb/sec, 500 mA
    USB Device: EPSON Scanner, EPSON, Up to 480 Mb/sec, 500 mA
    USB Device: USB-PS/2 Optical Mouse, Logitech, Up to 1.5 Mb/sec, 500 mA
    USB Device: USB2.0 Printer (Hi-speed), EPSON, Up to 480 Mb/sec, 500 mA
    USB Device: USB2.0 Storage Device, DMI, Up to 480 Mb/sec, 500 mA
    USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
    Powerbook G4 17"   Mac OS X (10.4.4)  

    Hold down the Sleep (or lock) button while holding the Home button. Keep holding them down until you see the Apple logo on screen. Do it for however long it takes to see the logo (like up to ten seconds). Let go when you see the logo and it will reboot.
    If that doesn't do it then something has gone seriously wrong but I doubt a Safari crash could have been the cause of that kind of problem.

Maybe you are looking for