Exist some OLEDB for vs2008 to connect directly to Oracle 9i on Windows CE5

Hello,
I need to directly connect from a client with windows CE 5 to a server with Oracle 9i.
*¿Exist some element of oracle to do that?*
Thanks

Hi Sri;
You can go with
1. Download OEL 5.x version from e-delivery.
2. Create VM machine(make googling you can find many good site)
3. Use your OEL software and create Vm linux machine on your win7 laptop
4. Install 11g and use it for your purpose
Pelase review:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
How to Install Oracle 10gR2 on MS Windows 7 / Windows 2008R2 [ID 1173433.1]
Is Microsoft Windows 7 certified to install/run Oracle Database Server/Client ? [ID 952302.1]
Statement of Direction: Oracle Database 11g Release 2 - Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
Regard
Helios

Similar Messages

  • CR for vs2008 not connecting on Windows Server 2012R2

    I have an application running on Windows Server 2008R2 which I urgently need to mirror on Windows Server 2012R2.
    However, my crystal reports basic runtime for vs2008  version 10.5.1.0
    and crystal reports basic runtime for vs2008(64) version 10.5.0.0  brings up the report but doesn't seem to connect to the
    database  (it seems to be pulling in a null dataset)
    What am I doing wrong?  [I tried opening all incoming ports, etc, etc]
    This is the web.config line: 
    <add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
    [changing this crashes the application]

    Hi,
    CR for VS 2008 does not support Windows Server 2012.
    See this article: http://wiki.scn.sap.com/wiki/pages/viewpage.action?original_fqdn=wiki.sdn.sap.com&pageId=56787567
    Currently there is only one version of CR which supports WS 2012, SAP Crystal Reports for Microsoft Visual Studio.
    http://scn.sap.com/docs/DOC-7824
    You would need to upgrade to VS 2010 or VS 2012 and SAP Crystal Reports for Microsoft Visual Studio.
    - Bhushan
    Senior Engineer
    SAP Active Global Support
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Getting started and moving ahead with Crystal Reports .NET applications.

  • ColdFusion and Connect:Direct (a.k.a NDM - Network Data Mover)

    Hi All,
    Our client is looking for an alternate for FTP and it seems they might go for IBM's Connect:Direct (previously known as NDM - Network Data Mover).
    Can anyone share the feasibility of accomodating this Connect:Direct software as an replacement for current FTP activities?.
    Thanks in advance!

    I don't think you've given enough information for people to give you useful responses. Are you asking about how CF interacts with this product? (Answer: it doesn't directly, you'd have to use CFEXECUTE.) Are you asking about using this to replace FTP server functionality on your server? Is this for public or internal use? Etc, etc.
    Dave Watts, CTO, Fig Leaf Software
    http://www.figleaf.com/
    http://training.figleaf.com/

  • How to capture the exact SQL exception for failure to connect to database

    Hi, i would like to capture the exact exception for failure to connect to a Oracle 9i database (via JDBC). I learnt that there is specific code or exception that can be captured, so that a more proper error message can be thrown out like "Failure to connect to database" can be displayed. Anyone know how to go about doing it? thanks

    That depends on your database vendor, I believe. (Unless there's a SQL standard for states and codes that I'm unaware of.)
    Personally, I wouldn't worry about "catching" a particular code. (You've already caught the exception - that's the best you can do.) I'd report the error code and state and just look up what it means when I got one.
    Hopefully you won't be catching exceptions. They're supposed to be rare. - MOD

  • Connect ODI12c to Oracle Database in Cloud

    Hi,
    Could anyone throw some light on how to connect ODI12c to Oracle and Non-Oracle Database hosted on Private or Public Cloud from on premise ODI12c instance?
    I have read an article by David Alan, explains connecting through SSL Tunnel. Is it the only way? Is there any out-of-the-box method to connect to Cloud?
    I have also read the white paper by Oracle, which says ODI can be used for data integration with cloud. But, How?
    Thanks in advance.
    Thanks & Regards,
    MT

    Right now there's no other way to connect in the cloud DB other than sql developer, but you don't need a tunnel to connect with it.
    You need just to configure your connection with you sftp info and it will work.
    Take a look in this article that's very useful.
    http://docs.oracle.com/cloud/latest/dbcs_schema/CSDBU/GUID-3B14CF7A-637B-4019-AAA7-A6DC5FF3D2AE.htm#CSDBU177
    Hope this can help you.

  • HT2275 Do I need to choose "Share this printer on the network" for printers that are not connected directly to my MacBook Pro? I have two HP printers connected to an Airport Extreme (WiFi turned off). I connect by WiFi to another Airport Extreme w cable t

    I have three Airport Extreme (AE) routers in my home network.
    The main AE is set up for wifi access. The other two are connected by ethernet cables to the main AE. My MacBook Pro connects to the network wirelessly through the main AE. The AE in my office has two HP printers connected to it by ethernet cables. I have a Kodak All-in-one that is connected by USB to my MacBook Pro.
    I reset my printer connections on my MacBook Pro and had to add all the printers back to my printer list. I don't know if I understand what the checkbox "Share this printer on the network" in the Print & Fax System Preferences window is for. My guess is that I don't need to share printers unless they are connected to my MacBook Pro by USB, so I should uncheck the "Share this printer on the network" box for the two HP printers that are connected to the AE. I print to them over the network, but they're not connected directly to any computer. I thought if my MacBook Pro wasset to share them and was shutdown, the printers might not be available to my Mac mini or Dell PC, which connect by ethernet to the office AE (which has the two printers connected to it).
    What should I do?
    For printers connected directly to a Mac (or PC) by USB, check the "Share this printer on the network" box? In my Sharing Preferences, I check "Share Printers."
    For printers connected to the AE by ethernet, UNcheck the "Share this printer on the network" box on my Macs (& PCs?) when I add the printers to my printer list? In my Sharing Preferences, I UNcheck "Share Printers?"
    FYI
    HP LaserJet Firmware Update Utility for HP P2035n is available
    Version: 20120105 (19 Mar 2012)
    Operating System(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.6, Mac OS X 10.7
    File name: P2035_FW_Update_Utility_20120105_v1_4.dmg (3.8 MB)
    line: <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3662025&prodNameId=3662049&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=lj-94537-3>

    Question is - will the 2 networks (using auto channel negotiations) exist well in the same house or will there be interference?
    Things will be fine since the AirPort Express or AirPort Extreme will automatically search for a good wireless channel. If you assign a separate name for the wireless network, then devices will need to log in separately to this network. The extending device will need to be configured in Bridge Mode.
    My suggestion would be to configure what is known as a "roaming" network in your question #2. In this case, you would assign the same wireless network name, security and password settings to the extending device and configure it in Bridge Mode.
    The advantage to #2 is that you will be able to walk your laptop from a location near the Time Capsule and as you move close to the extending device, the laptop will automatically switch to pick up the stronger signal from the extending AirPort.
    You are actually creating a separate network in #2, so you have the advantage of maximum bandwidth for both the TC network and the AirPort network.
    Question - does the Airport Express have to be directly connected to the TC or can that connected be through a switched network?
    I'm assuming that you are asking about an Ethernet switch here, correct?  The AirPort Express or AirPort Extreme can connect to the Ethernet switch, or directly back to a LAN port on the Time Capsule, whichever is easier to setup.
    Question 2 - assuming I can connect the Airport Express to the TC over a switched network, will "extending" the network using the Ethernet network still reduce my overall wireless bandwidth?
    Connecting the remote device using Ethernet is by far the best way to extend a wireless network because it maintains maximum bandwidth on the network. This is the way that any good commercial network is designed.
    Post back if you need any tips to get things setup.

  • I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

    I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
    Narmin

    I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
    In the title you state.
    From my interanet I can access srvr but not from my home.
    Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
    In the first post you state,
    I can access windows server from within interanet but don't know how to access it from internet.
    Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
    But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
    I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
    And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
    1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
    2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
    There are lots of references to port forwarding in the TC.. eg
    http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
    The things that generally go wrong are firewall on the computer that is accepting the port.
    The ISP doesn't allow connections on a particular port. (not likely in your case)
    The router is behind another router.. double NAT will kill any port forward.
    Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
    IP on the receiving device is not static and so changes.
    Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

  • Looking for a bluetooth headphone for my Macbook Air and Ipad Mini, I am not looking for a headphone that needs a transmitter to be connected to the source rather a headphone that can be connected directly via bluetooth to the source device

    I am desperately looking for a bluetooth headphone that would be compatible to my Macbook air and Ipad mini both. I am more of looking for a headphone that does not need a transmitter device to be connected to the source (in this case Macbook Air and Ipad Mini) and headphone acting as a receiver, rather need a headphone that would be connected directly via bluetooth to the source, it would be great if multiple apple devices be connected simultaneously. Please suggest some good headphones.

    Hey sorry for the late reply, I was busy to figure out alternatives as harman kardon was a difficult affair to find and acquire, but the good news is I managed to get hold of alternative.
    Sony I assume recently launched a Bluetooth headphone DR-BTN200 which is compatible to my MacBook Air , iPad mini and android phone galaxy s2 with ease, the sound quality is pretty good as compared to other brands of Bluetooth headphones I checked compatible or incompatible to apple devices alike, this is definitely what I was looking for, costed me 7990 INR, this is highly recommended for ppl who are confused, I carried my devices to the store and checked before I bought a pair and pretty much happy,
    The best part of this is its battery backup, I have used this hours for 3-5 days but this has not drain even then, but I do keep this charging once in 2-3 days just to keep this ready otherwise it does not even ask for it neither the quality of sound drops after 2-3 days of use.
    This is over the ear headphone which is very soft but it's get sweaty around the ear I guess that's bound to happen.
    Do get back to me for any other details, would be glad to share with all :)

  • TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

    I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
    I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

    Hi, I disabled the antivirus and the firewall. Same result
    I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
    Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
    My iphone 5 is not jailbroken, and is a factory unlocked phone.
    Any other suggestion?
    Pls help

  • Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

    Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

    If you just reboot it, does the problem go away?

  • A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  WHen we plugged it into the port on the keyboard, the device works. Why?

    A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  When we plugged it into the port on the keyboard, the device works. Why?  Obviously the device is operational.  Could the USB port have burned out from having too much power drawn?  If so, is it reparable?

    It can't draw "too much" power, it can only draw as much as the USB port is able to provide and no more. IIRC, the keyboard port has a lower power output than the iMac's port.
    That being said, yea, it's possible that the port has failed and it can be replaced or if another port works you can use that one. Although if it is still under warranty or covered by Apple Care, then I would take it to an Apple Store or service provider to get the port repaired.

  • TS1368 Even though I can connect to the Internet, I cannot connect to iTunes.  I bought some hints for a Crickler game and cannot retrieve them using 3 g or wifi.  I went into the confirmation email on the purchase and tried to report problem but couldn't

    I can't connect to iTunes.  I have Internet connection with wifi and 3G.  I bought some hints for Crickler and I cannot claim them.  I tried to report the problem using the link on the purchase confirmation email but I can't get into ITunes to report it and I suspect that's why I can't claim the hints.  I have an ipad2. Could iTunes be corrupted?  I tried rebooting and that didn't work.

    oh I'm not actually using a router, I'm using my macbook pro as a wifi router by turning on network sharing.
    And I'm sharing the connection through PPPoe
    ...unless, of course, I'm totally misunderstanding your question @@;
    I'm a complete tehcno noob =__=;

  • For some time now, when I connect my iPod to my PC, I'm told my iPod cannot be synced to iTunes because (the file cannot be found).  What gives?

    For some time now, when I connect my iPod to my PC, I'm told my iPod cannot be synced to iTunes because (the file cannot be found).  What gives?

    Sounds like the file yo are trying to sync to the iPod is corrupted.
    Try syncing only one item that plays in iTunes on the computer.
    Also see the following since when you downgrade iTunes you have to reset your iTunes library since the older version can't read the updated version of the library.

  • I have a Blackberry 8330 and a MacBook. For some reason I started having connectivity issues. The handheld will not sync with the computer via pocketmac. I have uninstalled, etc 15 times. Please help

    I have a Blackberry 8330 and a MacBook. For some reason I started having connectivity issues. The handheld will not sync with the computer via pocketmac. I have uninstalled, etc 15 times. Please help

    Hi Peter!
    I'm sorry to read that you are having issues with your Sync account.
    Your best bet is to follow the steps described in this blogposts and open a bug:
    https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/
    After that, if you don't want to user Sync in your computer, you can stop it with this simple steps:
    * At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options.
    * Once the options window opens, click on the Sync tab.
    * At the bottom of the Sync tab click on '''Deactivate this Device''' link

  • HT1349 for some reason i tunes wont connect to my i pod touch because of an unknown error? does anyone know whats going on?

    for some reason i tunes wont connect to my i pod touch beause of unknown error. Does anyone know whats going on?

    You seem to have a lot of #fff codes in the CSS files that obviously aren't found with the long #ffffff search term (#fff finds them)
    Make sure that the match case box isn't selected on the Find bar (Ctrl+F)

Maybe you are looking for