Existance of two different domain in a single subnet

Hi..i have a query...Is it possible to create two domains say A.com and B.com in a single subnet(in the same network)?sujit mohanty

Yes, there is no problem to perform that.
You have to give more details about what you want to accomplish exactly so that we can help you more.
Note that it is recommended to have at least two DC/DNS/GC servers per domain.
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft Certified
Professional
Microsoft Certified
Systems Administrator: Security
Microsoft Certified
Systems Engineer: Security
Microsoft Certified
Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows 7, Configuring
Microsoft Certified
IT Professional: Enterprise Administrator

Similar Messages

Authentication needed after doing trust between two different domains.

Hi There,
I have a problem when i did the trust relationship between two different domains in two different forests ,,in the trust relationship steps all working two ways trust,with external trust,stub zone created on both domains and they are validated in both sides
,,my problem is with the objects it can't be retrieved from side and it can be from the other side . For instance :
NY domain can get the users and computers of 2012DC1
but 2012DC1 can't get the users and computers of NY
Date and time are the same,i am always getting this error
The session setup from computer '2012DC1' failed because the security database does not contain a trust account 'test.com.' referenced by the specified computer.
USER ACTION
If this is the first occurrence of this event for the specified computer and account, this may be a transient issue that doesn't require any action at this time. If this is a Read-Only Domain Controller and 'test.com.' is a legitimate machine account
for the computer '2012DC1' then '2012DC1' should be marked cacheable for this location if appropriate or otherwise ensure connectivity to a domain controller capable of servicing the request (for example a writable domain controller). Otherwise,
the following steps may be taken to resolve this problem:
If 'test.com.' is a legitimate machine account for the computer '2012DC1', then '2012DC1' should be rejoined to the domain.
If 'test.com.' is a legitimate interdomain trust account, then the trust should be recreated.
Otherwise, assuming that 'test.com.' is not a legitimate account, the following action should be taken on '2012DC1':
If '2012DC1' is a Domain Controller, then the trust associated with 'test.com.' should be deleted.
If '2012DC1' is not a Domain Controller, it should be disjoined from the domain.
Can you please help me in this error.
Thank You in advance.

Hello,
"The session setup from computer '2012DC1' failed because the security database does not contain a trust account 'test.com.' referenced by the specified computer. "
This belongs to the machine 2012Dc1 in test.com and not to the other domain from your trust. Seems for me that you mix the trust with the problems of the machine 2012DC1 in test.com.
In this error message 2012DC1 has lost the trust to its OWN domain and therefore you have to find the reason. How exactly was this machine installed?
Or was there a restore on that machine from not supported type of backup like image/clone/snapshot?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Taking data from two different server in a single table

Hi All,
can u plz tell me i want take a data from a two different server in a single table
Thanks,
Bell.

Again, you have written the same sentence. I have 2 servers Server1 and Server2 and one table called my_table (You or God knows where this table is).
Now tell us what you want to do ?
Sidhu
http://amardeepsidhu.blogspot.com

Update two different tables by a single sql query:

Hi All,
i need to update two different talbes in a single sql query..
i m using the following query
UPDATE FT_User_Alert SET Subscription = 'W' where product_key=1 and measure_key = 12
AND
UPDATE LU_Monthly_Alert_Budget_Sheet SET Min_Red_Range ='16.0' AND Max_Green_Range ='24.0'AND Max_Red_Range ='27.0'AND Min_Green_Range ='16.0' where product_key='1' and measure_key = 12
i m getting the following error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43093] An error occurred while processing the EXECUTE PHYSICAL statement. [nQSError: 17001] Oracle Error code: 936, message: ORA-00936: missing expression at OCI call OCIStmtExecute: UPDATE FT_User_Alert SET Subscription = 'W' where product_key=1 and measure_key = 12 AND UPDATE LU_Monthly_Alert_Budget_Sheet SET Min_Red_Range ='16.0' AND Max_Green_Range ='24.0'AND Max_Red_Range ='27.0'AND Min_Green_Range ='16.0' where product_key='1' and measure_key = 12 . [nQSError: 17011] SQL statement execution failed. (HY000)
SQL Issued: EXECUTE PHYSICAL CONNECTION POOL writeback UPDATE FT_User_Alert SET Subscription = 'W' where product_key=1 and measure_key = 12 AND UPDATE LU_Monthly_Alert_Budget_Sheet SET Min_Red_Range ='16.0' AND Max_Green_Range ='24.0'AND Max_Red_Range ='27.0'AND Min_Green_Range ='16.0' where product_key='1' and measure_key = 12
but when i m ushin the same query in Microsoft SQL Server it executes properly:
please help me out...

Duplicate thread. I've already answered on your other thread...
update two different tables by a single sql query:

Pricing for two different components in a single assembly

Dear All,
Issue is regarding if we maintain two different components in a single assembly.
Say A nut & Screw assembly, Nut value is fixed & screw value differs as the length of screw differs each time.
Issue is how to maintain the pricing OR price.
i/ps will be of great helpful & rewarded too.
With Regards,
Vijayashree
Message was edited by:
Vijayashree nair

Hi Vijayashree
Normally you will maintain price ONLY for the final product which you are going to sell. So in that case, the question of maintaining price for components does not arise.
However following options are available in SAP
If you want the system to carry out pricing, inventory control, and delivery processing at main item level, enter ERLA in the Item category group field of the Sales: sales org. 2 screen in the material master record of the finished product. This means that the components only function as text items and are not relevant for delivery. The following graphic shows how a bill of material is processed at main item level.
If you want the system to carry out pricing, inventory control, and delivery processing at the component level, enter LUMF in the Item category group field of the Sales: sales org. 2 screen in the material master record of the finished product. In this case, only the components are relevant for delivery. During processing the system automatically creates a delivery group. The latest delivery date among all the components becomes the delivery date for the entire delivery group.
Thanks
G. Lakshmipathi

How to build transitional replication on two different domain servers in SQL server 2012 ?

Hi All,
We have to build transnational replication with updatable subscribers between two different domains .
Is it possible ,if it's possible please share the any document or process .....
Thanks in advance.
RAM

Yes this is possible.
Replication across two non-trusted domains or workgroups can be done by using Windows Authentication by configuring
pass-through authentication.
Create a local Windows account on both the Publisher and Subscriber that has
the same username and password. Use this account for the Merge Agent process account and have the connections to the publisher and distributor impersonate the agent process account. Ensure the account has the permissions required in
Replication Agent Security Model.
This approach is covered in the section Use Windows Authentication to Set Up Replication Between Two Computers Running SQL Server in Non-Trusted Domains in
HOW TO: Replicate Between Computers Running SQL Server in Non-Trusted Domains or Across the Internet.
Another approach to configure replication between non-trusted domains is to use SQL authentication for cross domain connections.
Brandon Williams (blog |
linkedin)

Is it possible to build two different L2TP/IPSec tunnels per subnet or per user?

Dear colleagues
I wondered whether anyone could help with this one.
Is it possible to build two different L2TP/IPSec tunnels per subnet or per user on a Cisco router or any other third party manufacturer? The idea behind is to allow different access to resources to different support technicians. Your help is much appreciated.

Sure, the ASA can use LDAP/AD information to select what access list should be applied for that specific user or group of users logging into the VPN. You can use whats called DAP or just LDAP Attribute Maps.

Exchange 2013 Two different Domains

hi guys
i am having Exchange 2013 on a production, our domain is domain1.com
i need to know if it possible to have two domains assign to the users over the exchange 2013
like user A will be able to have domain1.com and domain2.com
Domain1 and domain2 are a pop accounts wich will copy the emails from a external pop server.
domain1.com is working fine for users
much appreciate it

ok julian lets take one by one...
you mean i can configure user 1 to send with [email protected] and user2 with [email protected] ? on the same domain controller ?
Jatin: yes you can do this, but both the domains will have shared calender, address book and other resources. this kind of thing is basically done in case of group company environments where you have multiple sister companies and all need their seperate
email address. on single exchange server. so this is possible
and create Domain user with different name just to log in to the AD but send emails with different email adres ?
Jatin: AD login will always be with the primary domain create when installing AD.
can i create two adress policies on one exchange and specify each one to each user?
yes, and then apply to a OU with one OU having users from company1 and others form company 2. you can also apply two policies to one user. just in case
can i create two accepterd domain ? or just one with two different format ?
Jatin: you can create two accepted domains, so your mail server will then start receiving email from other domains also. for email address login on OWA/ECP you can add one more UPN suffix under AD domain and trust. once this is done and logon changed in
AD users and computers then users can log in to owa with their OWN company domian ID and they dont have to use primary domain to log in to OWA or outlook
Mark as useful or answered if my replies helped you solving your query.
Thanks, Happiness Always
Jatin
Skype: jatider2jatin, Email: [email protected]

How to Display two different objects in a single table header in Cross Tab?

i All,
I've a reqiurement for a Cross Tab Report like I need two different objects that should be displayed side-by-side, one object's values after another in a single header. In the picture below I've shown the objects separately in two rows, top header having BSNLNL,MTNLNL,RCOMNL and Header-2 having AIRTIL,RCOMIL. But requirements needs to be showing like this,
BSNLNL
MTNLNL
RCOMNL
AIRTIL
RCOMIL
Actually, the data for the header comes from a single object called Operator. I've show the Operators name ending with NL and after that names ending with IL. So, i've separated the data into two variables using the below formulae.
IL:
=[Billing Operator]
Where
Match([Billing Operator];"*IL")=1
NL:
=[Billing Operator]
Where
Match([Billing Operator];"*NL")=1
Also, the NL data should start first and after the NL data's last value ends, the IL data should begin.
One more thing is that I've to show '0' for null values. So i've used the below formulae on the column data. You can see below that except the "Outgoing ILD Mins in the month from Mobile Network" everything else showing fine. I don't understand why.
=If
Substr([Franchise];3;1)="M"
Then
   [Mobile Outgoing Charged Usage Minutes]
   Else
   0
I tried different approaches but couldn't find a solution. Could you please help me?
I'm using BO WebI 4.1 SP1
Regards,
Naren Vema.

Hi Naren,
No need to split Billing Operator object. Create a variable-
V_IL_NL= If Match([Billing Operator];"*IL")=1 Then "IL" ElseIf Match([Billing Operator];"*NL")=1 Then "NL"
1) Put V_IL_NL variable below Billing Operator object header.
2) Sort and create break on this variable.
3) Delete Footer column. it will automatically create when you apply break.
4) Hide V_IL_NL variable from this header.
~Anuj

Integration of ACS with two different Domain in different forest

Hi
We have two Domain Controllers in two different forests. One forest is X.IN and other is Y. In X.IN forest we have a tree called PPP.IN.
Is it possible to integrate ACS with both PPP.IN and Y? Please confirm ASAP.
Thanks
Ritesh

It is possible in ACS 4.2 to do machine and user authentication over cross forest trusts. See Resolved Caveats here:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/release/notes/ACS42_RN.html
HTH
Jeremy

A problem with Win 7 Pro, Outlook Web Access based on Exchange Server 2003, and two different domains

Dear Microsoft Support,
As mentioned in the title,
I have two domains. One is Domain A at HQ. The other one is Domain A at branch office. A laptop having Win 7 Pro OS is a client of Domain A. The Domain A has Exchange Server 2003. Users of Domain B get connected to Exchange Server for email services. In
all clients of the Domain B, IP address of the email server added in C:\Windows\System 32\drivers\etc\host file.
Whereas in the clients of Domain A it was not done, because all the servers including the email server belong to the Domain A.
Now, a user with Domain A's client (it is a laptop) came to Branch office and wanted to access the Outlook (using Outlook Web Access). since there is no IP address added in the Host file of the laptop, connectivity to email is not possible. When I try to
add the IP address, I was not able to do so due to Domain A's security reasons.
So, let me know, is there a way out to add the IP address in the host file of the Domain A's client.
Thanks in advance.
Ravi Sekhar Modukuru

I would suggest adding the mailserver address in Domain B's DNS. Would that be possible?
I agree. The correct solution in this case (since it appears you already have a two-way Domain Trust in place) is to properly configure DNS in Domain 'B' to be a secondary of Domain 'A' and completely eliminate the need to maintain the HOSTS file.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Install web dispatcher on two different domain

Hi Everybody,
I'm going to install web dispatcher on DMZ, that's not the same domain as Portal domain, but it cannot realize the host name that I insert for "rdisp/mshost"
I'm guessing the problem is becuase they are in different domains, Do you have any idea that what should I do?
By the way, My portal is in Microsoft cluster environment.
Thanks,
Maryam

Hi Maryam,
you have to ensure that from network side everything is configured correctly that the SAP Web Dispatcher can
communicate with the message server.
The hostname configured with rdisp/mshost must be reachable with a ping command from the host the Web Dispatcher is running on .
Kind Regards
Thomas Alt

It is possible to use two different accounts with a single Windows PC?

My wife and I use two personal iPhone 5, with two different appleID. At home we only have a windows 7 PC connected via iCloud with my iPhone 5 and my iPad (with the same appleID). I wish I could also connected the iPhone 5 to my wife, but i can't do it! It is possible? If it is, how should I do? I installed the program iCloud accepts only one appleID...
Thank you in advance who can help me!

Setup 2 user accounts on your PC, one for your wife and one for you. Enter the relevant Apple ID into each user user account.

How to do Apache configuration for two different domains

Hi ,
I was just trying out some clustering workshop on weblogic. I faced a issue..here is the scenario :
I have two clusters :
Cluster1 : 3 managed servers (server1,server2,server3)
Cluster2 : 2managed servers (server4,server5)
I have two sample applications which i have deployed on these two clusters i.e app1 on cluster1 and app2 on cluster2.
These two aplications are deployed successsfully as i am able to open these applicatons from browser by calling the individual port of the managed server like : http://localhost:7003/app1.
Now i have installed a apache server on my laptop and configured the http.conf file.
Issue : I am not able to call both the application from apache. If there is only one cluster then it is working fine and for two application only one cluster (application) is working that too whose port is defined in the last.
Here are the contents of my httpd.conf file :
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule weblogic_module modules/mod_wl.so
*<IfModule mod_weblogic.c>*
WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
MatchExpression /app1
*</IfModule>*
*<Location /weblogic>*
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
PathTrim /weblogic
*</Location>*
*<IfModule mod_weblogic.c>*
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
MatchExpression /app2
*</IfModule>*
*<Location /weblogic>*
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
PathTrim /weblogic
*</Location>*
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin <adminurl>
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName <servername>
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error.log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "logs/access.log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://<url>/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock logs/cgisock
</IfModule>
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402<url>/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
So here for the above configuration only app2 i am able to call and for app1 its saying "404 page not found".
Can soomebody help me in cofiguring apache so that i can call both the applications.
Thanks,
Ankit

>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
MatchExpression /app1
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
PathTrim /weblogic
</Location>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
MatchExpression /app2
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
PathTrim /weblogic
</Location>
>
This configuration is weird little bit. There is MatchExpression /app1 and MatchExpression /app2 and at the same time two <Location /weblogic> sections. Are you sure you understand what that configuration stands for?
Try something like this ...
<Location /app1>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
</Location>
<Location /app2>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
</Location>
where /app1 and /app2 are contexts of your weblogic applications.
http://download.oracle.com/docs/cd/E11035_01/wls100/plugins/apache.html
http://httpd.apache.org/docs/2.0/mod/core.html#location

How to superimpose data from two different charts into a single chart?

I have a single chart that lists numbers by month for a two year period like this:
Jan 100
Feb 200
Jan 103
Feb 199
The numbers are all in the same column rather than different columns.
I'd like to creat a chart that plots the data for each year on the same X axis, so that I can see the two january numbers, the two february numbers, etc. on top of each other. But nothing I've tried seems to work. Numbers seems to always put the second january after the first december on the x axis rather than recognizing it as a new series to be superimposed on top of the original january.
Is there some way to fix this short of putting the data into a new column?

What your describing is a table of wht I would call raw data. I would also have a summary table that would use functions like sumif and sumifs, then make my chart off that. This table would have each month in a column and the years across as headers. ( if you're familiar with excel, it would be the equivalent of making a pivot table and chart, but manually).
Jason

Existance of two different domain in a single subnet

Similar Messages

Maybe you are looking for