Existe algún software gratuito para simular estrategias de control usando los bloques de fundación fieldbus?

Estoy realizando mi tesis de graduación acerca de un projecto de automatización industrial. Y pienso que al mejor opción es el fieldbus de fundación. Desde ya, gracias por cualquier sugerencia o comentario.

Desgraciadamente, NI no tiene un software gratuito para simulacion de bloques de Fieldbus.
Te recomiendo que vayas a www.fieldbus.org a ver si ellos tienen alguna opcion.
Otra opcion es que envies un email a
[email protected] (por favor, que sea en ingles)
ya que ellos son el equipo de soporte especializado en fieldbus y quizas ellos conozcan alguna opcion gratuita.

Similar Messages

Message interface does not exist in any software components installed

"Message interface does not exist in any software components installed on this business system"
Essa é a mensagem de erro que estou tendo ao tentar configurar o XPath Receiver Determination do cenário SRVSC_WebAS_Outbound_ServiceStatusCheck.
Já notei que a mensagem dá porque o meu BS da NFe não está com o SWCV SAP SLL-NFE 1.0. Mas isso só no ID porque no SLD ele aparece. Não sei mais o que fazer pra ele aparecer no ID. Já eliminei o BS, executei um refresh do cache do SLD, depois executei um refresh full e nada! Quando eu crio o BS novamente, ele vem sem o SWCV SAP SLL-NFE 1.0.
Tive que configurar o XPath na mão para todas as SEFAZes!!!
Já li vários threads a respeito desse erro e executei vários procedimentos sugeridos, mas nada.
Alguém já possou por isso?!?

para ser mais preciso, verifique no payload de envio e recebimento da mensagem de verificacao de status do servico se estao correspondentes ao que estao abaixo, essa mensagem é de verificacao do SEFAZ de SP (35) para o ambiente de homologacao
(SENDER)
<?xml version="1.0" encoding="utf-8"?><n0:nfeStatusServicoNF xmlns:n0="http://sap.com/xi/NFE/005a" xmlns:prx="urn:sap.com:proxy:PID:/1SAI/TASE95D30ADB76F1544C2D5:700:2009/02/10" xmlns:n1="http://www.portalfiscal.inf.br/nfe"><n0:cUF>35</n0:cUF><n0:tpEmis>1</n0:tpEmis><n0:tpAmb>2</n0:tpAmb><n0:nfeCabecMsg><n1:cabecMsg versao="1.02"><n1:versaoDados>1.07</n1:versaoDados></n1:cabecMsg></n0:nfeCabecMsg><n0:nfeDadosMsg><n1:consStatServ versao="1.07"><n1:tpAmb>2</n1:tpAmb><n1:cUF>35</n1:cUF><n1:xServ>STATUS</n1:xServ></n1:consStatServ></n0:nfeDadosMsg></n0:nfeStatusServicoNF>
(RECEIVER)
<?xml version="1.0" encoding="UTF-8"?>
<nfeStatusServicoNFResponse xmlns="http://sap.com/xi/NFE/005a"><nfeStatusServicoNFResult><retConsStatServ xmlns="http://www.portalfiscal.inf.br/nfe" versao="1.07"><tpAmb>2</tpAmb><verAplic>SP_NFE_PL_005e</verAplic><cStat>107</cStat><xMotivo>Serviço em Operação</xMotivo><cUF>35</cUF><dhRecbto>2010-05-26T09:37:22</dhRecbto><tMed>1</tMed></retConsStatServ></nfeStatusServicoNFResult></nfeStatusServicoNFResponse>

Firefox é gratuito para empresas?

Tenho uma micro empresa e gostaria de saber se o firefox é gratuito para instalação nas minhas máquinas.

Olá flurucava,
Sim, como software livre, open-source, pertencentes à uma organização sem fins lucrativos - o Firefox é um software gratuito! =)
O Mozilla oferece também o [http://www.mozilla.org/en-US/firefox/organizations/ Firefox ESR] destinado a empresas.
Espero que essas informações tenham sido úteis!
Abraços,
- Ralph

Message interface does not exist in any software components

Hi masters,
I'm having problems with this message in my repository when I try to create an Interface determination with two interfaces mapping: "Message interface does not exist in any software components installed on this business system".
note: I have read all the posts about this problem but nothing has solved it.
I will describe more or less how is my SLD.
First all, my Technical System is an Web AS ABAP (non a third party).
I have created two receivers determination, with out problems, then, created the interface determination, with two Inbound interface, BUT, when I create a condition, the message appears, and the XPath doesn't shows the nodes for do the condition..
I have checked the GUID, and that's good.
NOTE: I have a second SWC but this is a third party... and when I test to do the same in this system, I have NO problems... so.. what is wrong with the Web As ABAP?
Regards and thanks

did you mean:
SLD -> Technical System->Technical System Type: WebAsAbap-> Installed Products->Add New Product and add my Software Component???
if is this, I have already done this, and still doesn't works.
Thanks

Message interface does not exist in any software components installed on th

Message interface does not exist in any software components installed on this business system.
hello,
When I check the interfaces on the business systems of 1 technical system, none of them have sender or receiver interfaces, hance I can't use them. The interfaces should ofcourse be on the Directory.
I have deleted the business systems and the technical system and created them again, but no result.
The product and software componets are in the technical sytem and business systems.
Any help would be usefull.
thanks,
Job

Hello!
If someone will search in the future for this error, here is the solution:
The error occurs if the GUID of the software component at the SLD is different to the one at the repository. Please compare the GUID at the SLD -> Administration -> Content Maintenance -> Dropdown "Component Version" -> Dropdown "Software Component Version". At the Integration Repository you select the Software Component Version at at the tab "Keys" you find the related GUID.
The error occured because the Software component has been created manually at the system. The repository content came from another system via import with own SLD (and because of that with another GUID for the software component).
Kind regards,
Klaus

Error - "Message Interface does not exist in any software components"

HI
This is an Idoc sender - SOAP receiver scenario.
When I try to create the receiver determination, I get a warning message -
" Message interface does not exist in any software components installed on this business system"
I checked all the usual things & also reimported the IDoc metadata.
Any suggestions are appreciated!
Thanks
Rachana

Hi Rachana !!
You should also check if the given idoc type in mapping is the same that in the WE20.
Also try to reactivate your integration directory objects by making any dummy changes.
Check your receiver business system (I mean XI), that the logical systems are ok.
Check this document (page 31):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f2a9fa2-0a01-0010-32ac-d281db722b86
Regards,
Matias.
Message was edited by:
Matias Denker
Message was edited by:
Matias Denker

Message interface not exist in any software components on business system

Hi Experts,
In development-environment we have an interface (SAP->XI->3rd party system) with a conditional receiver determination (based upon a fieldvalue in RFC that comes from SAP, "CONTROL_RECEIPE_DOWNLOAD"). This functions properly in development.
After transport to production environment this structure is not known when I try to use it in the Integration Directory when creating a conditional receiver determination. Double-click on the interface does result in the startup of the integration builder, but the interface itself can not be found. The following error-message appears:
"Error message Message interface does not exist in any software components installed on this business system"
All design-objects have been put into production and in Integration Builder the structure is available. In IR it is not...
In development In the business system of the sending SAP system, I can see the interface. In production, I don't see any interfaces at the business system....so this might be the problem but how can I add an interface manually to a business system?
Can anybody please help?
Thanks in advance
William

Hi William,
One more thing. In Production, check the technical system of source. SWCV in which you have developed your interface, should be installed on the source system. If this SWCV is not in list of your installed products & SWCV then add it. Update the business sytem in ID again & it will work. I guess you have done a typo by saying that objects are not available in IR but in Integration builder its avaliable.
Regards
Sushil

Loading mcaffee livesafe wants me to remove existing anti virus software. How do I know what I have on my pc

I am loading Mcaffee for me MAC and thought I had removed the existing antivirus software but it says I haven't. How do I look for existing anti virus software?

Little Teddy wrote:
I am loading Mcaffee for me MAC
Are you REALLY a sure you want to do this? Macafee products are generally not well received in the Mac world. The same can be said for anti virus in general.
before doing something that will slow your Mac to a crawl take a look at http://www.thesafemac.com

Can my existing Adobe CS5 software run in Yosemite?

I'm using a Mac book pro with 10.6 Snow Leopard, can my existing Adobe CS5 software run in Yosemite?

Finally the CS5 software can run successfully(but not sure if any problem would occur I haven't met at the moment) after installing the Java SE6. But I found the system privacy setting part got problem in clicking the unlock button , and also the mouse got problem too~

Como le hago para simular un circuito con un parlante

Tengo un circuito de un amplificador de audio, pero no se como hacerle para simular el circuito y que me de un sonido cuando lo estoy simulando.
el circuito al parecer esta bueno, pero no tengo idea de como hacer para hacer que el circuito funcione y me de un sonido a la salida cuando lo simulo.
Alguien porfavor ayudeme.
Gracias por su ayuda!
Attachments:
Amplificador de Audio.PNG ‏13 KB

Hola
Quiero preguntarte primero en que programa estas simulando tu circuito??? Lo segundo es quieres que lo que suene sea la simulación o ya quieres que funcione el circuito? En tercero checando el circuito creo que la manera en que lo tienes conectado está funcionando como negador te mando este amplificador tipo AB muy sencillo y funciona muy bien solo necesitas el opam LM386 y el VCC es igual 6V espero que te sirva.
Juan Arguello
National Instruments México y Latinoamérica
Applications Engineer
Attachments:
Amplificador.PNG ‏13 KB

Existe una version de evaluacion para linux

Estoy realizando un proyecto con labview, pero se me ha pedido usar linux, me pueden confirmar si existe una version de evaluacion para linux

Perdone mi español.
No hay versión de la evaluación disponible para Linux. Está para Windows, solamente.
LabView para Linux está disponible.
Contacto National Instruments, por favor.
JLV

I am using a Mac Leopard and want to know if I upgrade to Snow Leopard (so I can use the new Lightroom 4) will any of my programs be affected. I will not be able to restore some software and want to know if I'll lose those programs with the upgrade?

I am using a Mac Leopard and want to know if I upgrade to Snow Leopard (so I can use the new Lightroom 4) will any of my programs be affected. I will not be able to restore some software and want to know if I'll lose those programs with the upgrade?

Hello,
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they do still have it:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
And it's been reported that if you have a MobileMe account Apple will send one free.
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.

Everytime i plug my iphone into my computer it says device not recognized i was syncing my phone and it got interupted and has not worked since i have iphone 4 with 4.1 software lol what can i do to not lose everything

Everytime i plug my iphone into my computer it says device not recognized i was syncing my phone and it got interupted and has not worked since i have iphone 4 with 4.1 software lol what can i do to not lose everything

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Existe algún acuerdo telcel-Apple para el desbloqueo del iPhone?

Telcel dice que no puede desbloquear un iPhone por el acuerdo que tiene con Apple, esto es cierto?

¿Usted firmó un contrato al conseguir que eres iPhone? Si para que pudieran tener restricciones sobre la conveniencia o no se les permite desbloquear el dispositivo.
Intenta contactar con el soporte de manzana y ver lo que dicen.
Espero que esto ayude

Unable to move existing installation to software RAID-1 setup

I have an existing Arch Linux amd64 installation which I want to move to a RAID-1 setup.
I followed the following Wiki article:
Arch Linux Wiki - Installing with Software RAID or LVM
with necesary changes applied and some supplemental advice from the equivalent Gentoo Wiki article:
Gentoo Linux Wiki - HOWTO Install on Software RAID
mainly for the "--assume-clean" command-line switch to mdadm.
With a Larch live CD I took a tarball backup of each partition.
Then with cfdisk partitioned the disks.
And copied their partition tables to their RAID-1 mirrors:
sfdisk -d /dev/sda | sfdisk /dev/sdb
Now, I cannot boot Arch on the RAID-1 setup.
After initramfs is finished, I get a kernel panic as the "/" partition cannot be mounted.
The mkinitcpio.conf that created my kernel is this:
MODULES="ahci pata_amd ata_generic sata_nv sata_sil"
HOOKS="base udev autodetect pata scsi sata usbinput keymap raid lvm2 filesystems"
My rc.conf is this:
MODULES=(raid1 powernow-k8 fuse forcedeth ac battery button fan thermal loop)
My fstab ("/" and "/boot" lines) is this:
/dev/md0 /boot ext3 noatime 0 1
/dev/md1 / ext3 noatime 0 1
And my menu.lst is this:
timeout 5
default 0
color light-blue/black light-cyan/blue
title Arch Linux
root (hd0,0)
kernel /vmlinuz26 root=/dev/md1 ro swncq=1 md=0,/dev/sda1,/dev/sdb1 md=1,/dev/sda2,/dev/sdb2
initrd /kernel26.img
I even tried another shot by passing all ten RAID-1 arrays (md0 to md9) as kernel parameters, but still, no effect.
Any help would be greatly appreciated.
PS: I have created a correct mdadm.conf file with:
mdadm -D --scan >>/etc/mdadm.conf
Last edited by wantilles (2008-09-08 08:28:20)

My experience with raid suggests that mdadm setups work after boot-up as "software raid". The array is assembled and "ID'd" with mdadm --assemble command.
IMHO In order to utilize mdadm for boot-up, how does the user "assemble" before the elements needed for mdadm --assemble are accessible?
IMHO My understanding of booting with raid involves the use of dmraid, a "software" raid program which can be adapted to boot use. It involves changes to the boot sequence to prevent loss of dmraid params during the boot processes such as hardware detect AFAIK.

Existe algún software gratuito para simular estrategias de control usando los bloques de fundación fieldbus?

Similar Messages

Maybe you are looking for