Existe-t-il un moyen de verrouiller l'accès aux réglages de l'ipad uniquement ?
Bonjour,
En cas d'utilisation de groupes, existe-t-il un moyen de bloquer par code l'accès aux réglages de la tablette ?
Nous avons mis des restrictions avec un code mais n'importe qui peut toujours accéder aux paramèttres et décider de mettre un code de verrouillage sur la tablette... Il nous faudrait pouvoir limiter l'accès aux réglages par un mot de passe, un code...
C'est peut-être inexactes, mais je suis en utilisant Google Translate.
Est-ce que vous utilisez les périphériques via le configurateur? Si c'est le cas, il n'existe aucun moyen pour empêcher un utilisateur d'ajouter un mot de passe, mais vous pouvez le réinitialiser en branchant l'appareil en l'essuyant sans.
Similar Messages
-
Pour synchroniser des photos (Apperture) sur iPhone ou Ipad, Itunes me les propose dans le désordre alors que les évènements sont parfaitement classés dans Appperture!( ordre simple: AAA-MM-JJ- sujet). Existe t-il un moyen de corriger ce désordre?
Merci -
Bonjour,
Existe t-il un moyen d'afficher dans un menu deroulant toutes les partitions existantes d'un disque et tous les eventuels peripheriques de stockage (type USB ou autre). Le but etant de creer une liste de peripherique existant ( C: , D: , F:, G: , ...) dans un menu déroulant. merci par avanceBonjour,
Dans kernell32.dll, vous avez la fonction GetLogicalDriveStringsA qui permet de lister les lecteurs.
Cordialement
Pièces jointes :
Get Drives.vi 29 KB -
Existe-t-il un logiciel pour lire les vidéos en fois 2 sur l'ipad ?
Un logiciel pour lire les vidéos en accéléré sur l'ipad ?
Hello Kevin@VALEO,
You're in a English section of the forum. Please write in English is you expect an answer. Otherwise, you can post your question in the French section here.
Regarding your question, why don't you use the Create Task function in order to test if a task already is using the digital channels? If the function sends the specific error which indicates your digital channels are already in use, you'll know it.
Please don't hesitate to post a simple example which demonstrates the error you meet, eventually attach a screenshot and give us details if you wish more help.
Regards,
Jérémy C.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France -
Lors d'une mise à jour logicielle,j'ai perdu tous mes contacts et mes fiches jaunes. Je précise qu'ils n'avaient pas été sauvegardés
Existe t'il un moyen de les restaurer ?Hi Subarutuning,
If you are receiving an error when attempting to update your iPhone, use the steps in this article to troubleshoot -
Resolve iOS update and restore errors - Apple Support
Error (1) is associated with a hardware issue, but use these steps -
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Thanks for using Apple Support Communities.
Best,
Brett L -
THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help! -
"If you exceed your iCloud storage limit, photos and videos won't upload to iCloud, and your library will no longer stay up to date across your devices." Really? Can't we support the existing "last 1k photos will be available in the cloud" model? If we don't do this, won't this kill auto-sync of new photos from iOS devices to our libraries on our Macs (if the Mac's Photos app has auto syncing with the cloud turned on) once we go over our 5gb limit? I have 350GB of photos in my Mac Photos library - I am not going to pay $20/month for 1tb iCloud storage. Please advise, Apple. Thank you.
I agree and am baffled by this also. At first I was really excite about this new feature. Mostly because I would be able to seamlessly sync videos along with my PhotoStream. I just assumed there would be some systematic way to handle large libraries. Like removing older files as the current PhotoStream does. However, it appears that this new feature will simply 'shut down' when you reach your storage limit. This just makes no sense to me. I would have to double check, but I have all my photos and videos in iPhoto and stored on a 3 TB external hard drive and I think the full library is over 1 TB. So, even if I was willing to pay $20 a month for photo syncing (which I am not) I couldn't do it because my library is too large. Again I am just baffled why Apple cannot blend this new service with the existing PhotoSteam model. My favorite aspect of PhotoSteam is that is uploads all my iPad and iPhone Photos to my Mac for permanent storage and it seems this is lost in the new version.
-
There exist softwares such as iExplorer that claim to be able to view files in the iPad which might not be visible through iPad/ iTunes. Has this woked for anyone?
Thanks ...This should save me further fruitless hours on the internet attempting to find some sort of a solution.
-
mon iphone3 est bloque et me demande de me connecter a itunes c fait itune me met un message :l'iphone est verrouille par un passcode qu'il faut entrer sur l'iphone qui est deja bloque merci de votre aide
ok, si tu as essayé le restore de préférences par la commande au démarrage : Cmd+shift+ctrl+alt et que tu as eu la fenêtre de restaure de tes préférences et que rien n'y fait...
Une soluce à fonctionné pour moi pour recupérer mon indesing cs6 (photoshop et illustration, audio étaient tous en place nickel). Je n'ai pas récupéré mon indesign CC 2014... mais déjà c'est pas mal
La manip founie par Mohammed :
1 - sur ton finder tu ouvres une fenêtre ou un dossier / tu va dans le menu du haut “aller“ ou commande + shift+ g et copier coller : ~/library
quand tu y est tu repère le dossier “PRÉFÉRENCES“ PAS UN AUTRE, tu dois avoir "pref panes" juste avant.., là c'est juste préférences.
accèdes aux informations par click droit/lire les infos ou commande “i“ .
2 - sur la nouvelle fenêtre qui c'est ouverte et que vous connaissez bien :
on déverrouille le cadenas en bas à droite. on rentre ses identifiant OSX.
S'il n'y a pas d'admin... clicker sur le petit plus en bas à gauche et rajoutez-le - ULTRA IMPORTANT
mettez tous les 3 : admin, staff et everyone sur lecture et écriture et ensuite tu referme ton cadenas en bas à droite.
3 - tu revient sur ton Finder et ré-ouvre un dossier quelconque / tu va dans le menu du haut “aller“ ou commande + shift+ g et copier coller : ~/library/Application support
tu fais la même que plus haut (2) : déverrouilles, change les permissions, referme ton cadenas
4 - dernière étape :
u revient sur ton Finder et ré-ouvre un dossier quelconque / tu va dans le menu du haut “aller“ ou commande + shift+ g et copier coller : /library/Application support
tu fais la même que plus haut (2) : déverrouilles, change les permissions, referme ton cadenas
quand c'est fais, ferme toutes tes applications Adobe, (redémarre ton ordi, mais c'est pas obligatoire), lance InDesign et dis moi merci... mais aussi à Mohamed le post original en anglais. -
Bonjour,
Existe-t-il une application me permettant d'accéder à des sites où l'on demande Flash Player?Applications telles que le navigateur Skyfire, iSwifter macareux et Photon «travail» sur certains sites, mais à en juger par leurs commentaires ne sont pas tous les sites. En outre, certains sites, notamment les sites de nouvelles, ont leurs propres applications dans l'App Store, afin que votre pourraient essayer de vérifier là pour vos sites (et il est le construit dans YouTube app)
Browser apps such as Skyfire, iSwifter Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, so your could try checking there for your sites (and there is the built-in YouTube app) -
How to apply music from itunes to my iPad without erase existing app
How to apply music from itunes on my pc to my iPad without erase existing app
Thanks a lot Ralph9430!
I did manage to solve problem of music transfer iPad mini-PC, however I didn't succeed in approaching iTunes Store and there is nothing in the manual about it.
When I open application I have iTunes U interface and cannot move anywhere but close app. I did try to re -enter pass and ID in iTunes Store app settings but nothing changed.
Does anyone have any idea what to do in order to have approach to ITunes Store.
Tnx! -
Comment ajouter une étiquette à un point dans un graph ?
Bonjour,
J'ai un graph XY d'un certain nombre de points, et je souhaiterai ajouter du texte dans le graph à des positions spécifiques (typiquement "point1" à coté du point de coordonnées [x1 ; y1]).
Existe-t-il un moyen simple pour écrire une chaîne de caractères dans un graph à un emplacement X;Y souhaité ?
Merci d'avance,
Résolu !
Accéder à la solution.il faudra utiliser
Propriété Liste d'annotations
Tableau d'informations concernant toutes les annotations. Chaque élément du tableau est un cluster d'éléments d'annotation.
Éléments
Nom
Description
Nom
Le texte affiché dans la zone de tracé associée à l'annotation.
Couleur
La couleur de l'annotation, y compris son point, sa flèche et son nom.
Style
Le symbole qui est dessiné au point central de l'annotation avec l'option Style de point. Les valeurs valides sont 0-8, comme indiqué de gauche à droite et de haut en bas dans l'élément de menu local Style d'annotation de l'annotation.
Style de point
Le symbole qui est dessiné au point central de l'annotation avec l'option Style. Les valeurs valides sont 0-16, comme indiqué de gauche à droite et de haut en bas dans l'élément de menu local Style de point de l'annotation.
Nom visible
Si cet élément est défini à VRAI, le nom de l'annotation est affiché dans la zone de tracé.
Autoriser le glissement
Si cet élément est VRAI, vous pouvez faire glisser l'annotation.
Mode d'annotation
Spécifie comment l'annotation est attachée aux tracés de la zone de tracé. Les valeurs valides sont 0 (Libre) et 1 (Pour un tracé).
Tracé
Le tracé auquel est associée l'annotation. Si Tracé est -1, l'annotation est attachée à tous les tracés de la zone de tracé. Vous pouvez déplacer l'annotation au point de données le plus proche d'un tracé de la zone de tracé. Cet élément ne s'applique pas aux annotations libres.
Indice
L'indice dans le tableau du point auquel l'annotation est attachée.
Position : X
La coordonnée x de l'annotation dans la zone de tracé. Position : X est exprimé dans le système de coordonnées de la valeur de l'échelle des X associée à l'annotation ou au tracé.
Position : Y
La coordonnée y de l'annotation dans la zone de tracé. Position : Y est exprimé dans le système de coordonnées de la valeur de l'échelle des Y associée à l'annotation ou au tracé.
Échelle des X
L'échelle des x associée à l'annotation. Cet élément ne s'applique qu'aux annotations libres et définit quelle échelle des x est utilisée avec Position : X.
Échelle des Y
L'échelle des y associée à l'annotation. Cet élément ne s'applique qu'aux annotations libres et définit quelle échelle des y est utilisée avec Position : Y.
Afficher la flèche
Si cet élément est défini à VRAI, la flèche qui pointe du nom de l'annotation au point de données annoté est visible.
Verrouiller le nom
Si cet élément est défini à VRAI, le nom de l'annotation est positionné de façon absolue, de sorte que si vous déplacez l'annotation ou que vous faites dérouler la zone de tracé, le nom de l'annotation ne se déplacera pas dans celle-ci.
Zone de tracé
La zone de tracé à laquelle est associée l'annotation. Cet élément ne s'applique qu'aux graphes de signaux mixtes ayant plusieurs zones de tracé.
Décalage d'étiquette : X
La coordonnée sur l'axe des X qui correspond à la position de l'étiquette par rapport à l'annotation.
Décalage d'étiquette : Y
La coordonnée sur l'axe des Y qui correspond à la position de l'étiquette par rapport à l'annotation.
A+
Luc Desruelle | Voir mon profil | LabVIEW Code & blog
Co-auteur livre LabVIEW : Programmation et applications
CLA : Certified LabVIEW Architect / Certifié Architecte LabVIEW
CLD : Certified LabVIEW Developer / Certifié Développeur LabVIEW -
Message d'erreur Windows 7 - LabWindows 2012
Bonjour
Je souhaiterai savoir si dans LabWindows 2012, il y a la possibilité de faire apparaître les messages ou notification de windows au premier plan.
Je vous donne un exemple:
Sur une de mes applications il est demandé de connecter un appareil - type clé USB.
Ce périphérique n'a jamais été connecté au PC, et nécessite un formatage afin d'être identifié et reconnu par Windows comme un périphérique de stockage.
Windows fait donc apparaître un message d'information demandant si l'utilisateur souhaite formater son périphérique.
Ce message se trouve au second plan sous le panel de mon programme CVI. L'utilisateur ne peut donc pas le voir.
Existe t'il un moyen pour que ce message Windows apparaisse au premier plan?
Merci
PS:
Je suis sous Windows 7 et utilise CVI 2012Bonjour M.MUIN,
Je m'excuse de la réponse tardive, néanmoins après plusieurs recherches infructueuses, je me suis mis à éplucher les exemples de LabWindows/CVI afin de vous apporter une solution.
Je vous recommande donc l'exemple "msgdemo.cws", disponible dans la recherche d'exemples de LabWindows/CVI, en effet celui-ci vous démontre comment autoriser votre "panel" à répondre à n'importe quel message Windows.
Je n'ai pas eu le temps de le tester mais suis très curieux de savoir si cela correspond à la demande.
Cordialement,
Mathieu_T
Certified LabVIEW Developer
Certified TestStand Developer
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
LabVIEW Tour
Journées Techniques dans 10 villes en France, du 4 au 20 novembre 2014 -
Comment convertir des fichiers Flash écrit en AS2 en html 5 avec Flash CC ?
Bonjour,
j'ai créé des présentations multimédias il y a quelques années en Flash en utilisant l'AS2 ces présentations sont constitués d'une multitude de fihiers swf qui se supperpose (loadmovie). Je dois aujourd'hui en faire une version html 5. J'utilise adobe CC et l'extension de Google Swiffy ne fonctionne pas sur cette version. Existe-t-il un moyen simple de convertir ces fichier écrits en AS2 en html5 ?
Merci d'avance de vos réponses.I'm basically trying to do the same thing.
I have two swf files and I need these as flv files.
I looked for some freeware to convert swf files to flv. The only ones I've found so far leave a watermark on the flash video file. As I only have two files to convert (and this is probably a one-off occasion), I am loathe to spend a fortune to do this....
We have a graphic designer here at our company with Flash CS3. Is it possible to do it within Flash?... or is anyone happy to convert them for me if they have the tools and if I email them to you?
(Pour Isabelle en français): J'essaye fondamentalement de faire la même chose.
J'ai deux dossiers de swf et j'ai besoin de ces derniers comme dossiers de flv.
J'ai recherché du freeware pour convertir des dossiers de swf en flv. Les seuls j'ai trouvé jusqu'ici le congé un filigrane sur le dossier visuel instantané. Car j'ai seulement deux dossiers à convertir (et ceci est probablement une occasion unique), je suis déteste pour dépenser une fortune pour faire ceci….
Nous avons un concepteur ici à notre compagnie avec le flash CS3. Est-il possible de le faire dans le flash ? est-ce que… ou n'importe qui est heureux de les convertir pour moi s'ils ont les outils et si je te les envoie ? -
HT1766 comment forcer une restauration d'iphone 4S ?
Bonjour,
J'ai essayé de restauré mon Iphone, ma à la fin de la restauration une erreur -1 s'affiche et la restauration ne se fait pas.
Existe t-il un moyen de forcer cette restauration ?
MerciHello ! vu la façon dont les sauvegardes sont gérées.......faut mieux acheter un tamtam !!!
pour Icloud c pareil !!!! Nul !
Maybe you are looking for
-
Master Detail report in bi publisher 11g
Hi All, We are using OBIEE 11g (11.1.1.6). How to achive the Master/Detail or Parent/Child reports in BI Publihser reports. Selectiing or Changing a column value in parent report should effect the child report/graph etc.. I understand this can be don
-
Apple TV locked on screen with settings and home sharing icons in bottom half and won't let me move back to main menu. Anyone know how to fix it?
-
While uploading the flat file getting Error when assigning SID
Hi , while uploading flat file i getting thid error . Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER and No SID found for value '0 ' of characteristic 0CURRENCY
-
I cannot remember the answeres to my security questions, please help.
-
Not Able to do Early Delta initialisation
I am getting following error whenever i am trying in infopackage to do delta init. "Init. select. for field name currently running in request REQU_41KR19B109L6331XGS97STZIN" This message error not allowing me to do delta init load in infopackage. An