Existence of input file too important in Presort verify

Summary
I'm concerned that the existence of an input file is too important in the presort verify process. If an input file is not found, other more relevant tests are not performed. Can the verify process be updated to continue verifying even though the input file or format does not yet exist?
Details
I work with Presort on a Windows platform. My company's systems construct templates for each project we process; we do not build them by hand. The templates are typically built once we have catalog attributes from the printer/mailer, which is before the files are sent to us. We would like to verify the entire template right away and let an automated system submit the presort to run.
Unfortunately, there are things called entry points that seem to change from month to month. We need to patch up ZIPs and drop site keys before the presort can run. But entry points are not tested nor errors posted when the input file is not found. That is the catch 22. PostalSoft recognizes that the existence of an input file is not fatal; it posts a yellow triangle. But it stops verifying after that. If entry points are tested even though there are fatal errors related to output files, can the same be true with input files? Can everything not related to files of file content be tested and errors posted when there are file related errors?
Thanks for your time and consideration,
dvn
Edited by: Don Nielsen on Jul 29, 2011 2:01 PM

I copied this from another thread on the forum.
How to contact SAP Primary Support for technical assistance:
1. Login to the SAP Service Marketplace (SMP) at [https://service.sap.com/bosap-support|https://service.sap.com/bosap-support]. This is the SAP BusinessObjects landing page.
2. Under Troubleshoot a technical problem, click u201CCreate a message/contact technical supportu201D
3. If the "Your Recently Used Systems" box displays, click the link in the System ID and Name column that corresponds to the product with which you need assistance (Proceed with Step 5)
4. If the Your Recently Used Systems box does not display, choose a system using System Search:
a. Select the Installation from the drop-down box that corresponds to the product with which you need assistance
b. Click Search (A table listing one or more systems appears below the System Search box.)
c. Click the link in the System ID column that corresponds to the product with which you need assistance
5. Enter text relating to the issue into the Search term box (This is a required step. You may get an answer to your question without having to wait for a support engineer to contact you.)
6. If you do not see any SAP Notes pertaining to your question, click Create Message.
7. Choose the correct Component for the product you are creating the message for. The component is very important as it allows the support message to be directed to the correct team. Click the icon next to the Component window to see a drop down list.
8. Expand EIM - Enterprise information management solutions. By each component the names of the products are listed. For example:
u2022 EIM-COR is used for ACE, DataRight IQ, Match/Consolidate, IACE, and FirstPrep.
u2022 EIM-COM is used for: DeskTop Mailer, Business Edition, Presort, PrintForm, Postal File Preparation, and Label Studio.
9. Enter a brief description of the issue in the Short Text box
10. Enter a detailed description of the issue in the Long Text box
11. (Optional) Attach any necessary files, by browsing for the file and clicking Upload
12. Click Send Message.

Similar Messages

How to execute an SSIS package on a scheduled basis from remote server and pass in input files

I have an application server and a db server. My db server has all things SQL Server stored on it (DBMS, SSRS, SSIS, etc.) I have several nightly batch process SSIS packages (dtsx files currently) that will pickup an input file and import them
into the database. I would like to execute all batch processes from my application server as I have quite a few other ones as well that do other stuff outside of SQL Server via powershell. My question is how to do this? Is there away to execute
them remotely via DTexec.exe, should I set them up as Agent jobs and somehow pass in the file names\location (how?), create and SSIS catalog, etc.?
I need to easily be able to see if the packages execute successfully or not and if not capture the detailed information of why they failed from the remote server so I can use that to drive my process flow logic in the batch processes.

Hi Jason,
According to your description, you want to execute a package on a schedule and receive notification when package ends with error in the job.
After testing the issue in my environment, we can directly add the package in a step of a job, then add a schedule and set the Alert and Notification property in the job to achieve your requirement. For more details, please see:
Create a Database Mail in the SSMS.
Right-click the SQL Server Agent services to Enable mail profile, then select the appropriate Mail profile.
Under the Operators folder, create an operator with the correct E-mail name.
Right-click the Jobs folder to add a new job.
In the Steps pane, New a step with SQL Server Integration Services Package Type to run the package.
In the Schedules pane, New a schedule for the job.
In the Alerts pane, New an alert with SQL Server event alert, then enable Notify operators option with an operator in the Response pane.
In the Notifications pane, enable Email option with same operator and When the job fails selection.
Then when the package fails, the job would be failed and we can receive the error message in the mailbox.
Besides, please make sure the account that execute the job has correct permissions for the file, for the folder that contains the file, and for the database.
References:
Configure Database Mail – Send Email From SQL Database
How to setup SQL Server alerts and email operator notifications
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

Is an 8.7GB file too big to import into iMovie 9?

Is an 8.7GB file too big to import into iMovie 9? I am using iMovie 8.0.6 on a Macbook Pro running OS 10.6.8 on 2.26 GHz Intel Core 2 Duo with 2 GB Memory. I can't get my movie file to import into iMovie...any advice would be much appreciated!

When you import into iMovie, your video is converted into DV format. This uses 13 GB per hour of video. So the first thing you have to do is make sure you have 26 GB free on your hard drive, plus another 10GB free for OSX to perform, plus 10GB free if you plan on burning a DVD.
iMovie has non-destructive editing. If you have used any part of a clip and discard the rest, that entire clip is still saved in your project - unused but eating up disc space. If you use no part of a clip and discard the clip, then the clip can go in the trash and you get back disc space. So...
If you import 2 hours of video (26GB) as one clip, and only use 2 minutes, your 2-minute segment retains its 2-hr source in memory. 2 min = 26 GB.
One thing you can do is set the iMovie preferences to automatically create new clips every 3 minutes. (2 hours of 3-min clips = 40 clips.) This allows you to find the 2-minute segment you want and delete all of the unused clips. Say your 2-minute segment comes from 2 of these 3-min clips, so you keep 6 minutes of source footage and delete the rest. Clips that are entirely unused will be completely deleted and give you back disc space. At .65 GB per clip, your 6-minute project is now only 1.3 GB, and you've just regained 24.7 GB of disc space.

The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1

The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1. If you select single file, then it is able to return file size correctly. However, if you select multiple files, then the file size of each of the selected file is always returned as 0 from javascript. This works correctly in Safari 4.0 but it does not work in Safari 5.1.
How do I get the correct file size in Safari 5.1 ?

If you want to post (or send me) a link to the lrcat file, I'd take a look at it for you, and give you a break-down what's consuming all the bytes. But it might be fun to learn how to do that yourself (e.g. using SQL). I use SQLiteSpy, but other people have their favorites.. (or you can use a command-line client if you prefer..). One way: just run "drop table "{table-name}" on each table then look at filesize (do this to a copy, not the real thing).
Anyway, it's hard to imagine keywords and captions etc. taking much of the space, since even if you had 1000 10-character words of text metadata per photo average that still only adds up to 117MB, which isn't a substantial portion of that 8G you're seeing occupied.
Anyway, if you've painted the heck out of most of them and not cleared dev history, that'll do it - that's where I'd put my money too...
One thing to consider to keep file-size down:
===================================
* After reaching a milestone in your editing, take a snapshot then clear edit history, or the top part of it anyway (e.g. leave the import step), using a preset like:
Clear Edit History.lrtemplate
s = {
    id = "E36E8CB3-B52B-41AC-8FA9-1989FAFD5223",
    internalName = "No Edit",
    title = "Clear Edit History",
    type = "Develop",
    value = {
        settings = {
            NoEdit = true,
        uuid = "34402820-B470-4D5B-9369-0502F2176B7F",
    version = 0,
(that's my most frequently used preset, by far ;-})
PS - I've written a plugin called DevHistoryEditor, which can auto-consolidate steps and reduce catalog size - it's a bit cumbersome to use a.t.m. but in case you're interested...
Rob

Multiple replacements from an input file with 1.4 Regex

hi,
i'm trying to make multiple replacments to a source file <source> using a second input file <patterns> to hold the regex's. the problem i'm having is that the output file only makes the last replacement listed in the input file. Example if the input file is
a#123
b#456
only b is changed to 456 and a remains.
the second debug i've got shows that all the replacements are in memory, but i'm not sure how to write them all to the file.
the syntax is Java MyPatternMatcher <source> <patterns>
import java.util.regex.*;
import java.io.*;
import java.util.*;
public class MyPatternResolver {
     private File patternFile;
     private File sourceFile;
     private Vector patterns = new Vector();
     public MyPatternResolver(String sourceFile, String patternFile) {
          this.sourceFile = new File(sourceFile);
          this.patternFile = new File(patternFile);
          loadPatterns();
          resolve();
     private void loadPatterns() {
          // read in each line if File
          FileReader fileReader = null;
          try {
               fileReader = new FileReader(patternFile);
          } catch(FileNotFoundException fnfe) {
               fnfe.printStackTrace();
          BufferedReader reader = new BufferedReader(fileReader);
          String s = null;
          String[] strArr = new String[2];
          try {
               while((s = reader.readLine()) != null) {
                    StringTokenizer tokenizer = new StringTokenizer(s, "#");
                    for (int i =0; i < 2; i++) {
                         strArr[i] = tokenizer.nextToken();
                         //Debugging Info
                         System.out.println("Token Value " + i + " = " + strArr);
                         //End Debugging Info
                    patterns.add(new PatternResolver(strArr[0], strArr[1], sourceFile));
          } catch(IOException ioe) {
                    ioe.printStackTrace();
     private void resolve() {
          Iterator iterator = patterns.iterator();
          while(iterator.hasNext()) {
               PatternResolver pr = (PatternResolver) iterator.next();
               pr.resolve();
     public static void main(String[] args) {
          MyPatternResolver mpr = new MyPatternResolver(args[0], args[1]);
     public class PatternResolver {
          private String match, replace;
          private File source;
     public PatternResolver(String s1, String s2, File f) {
          this.match = s1;
          this.replace = s2;
          this.source = f;
     public File resolve() {
          File fout = null;
          try {
     //Create a file object with the file name in the argument:
     fout = new File(sourceFile.getName() + "_");
     //Open and input and output stream
     FileInputStream fis = new FileInputStream(sourceFile);
     FileOutputStream fos = new FileOutputStream(fout);
     BufferedReader in = new BufferedReader(new InputStreamReader(fis));
     BufferedWriter out = new BufferedWriter(new OutputStreamWriter(fos));
     // The find and replace statements
     Pattern p = Pattern.compile(match);
               Matcher m = p.matcher(replace);
               //Debugging Info
               System.out.println("Match value = " + match + " Replace value = " + replace);
               //Debugging Complete
               String aLine = null;
               while((aLine = in.readLine()) != null) {
               m.reset(aLine);
               //Make replacements
               String result = m.replaceAll(replace);
               out.write(result);
          out.newLine();
               in.close();
               out.close();
          } catch (Exception e) {
               e.printStackTrace();
return fout;

If your aim is to learn about regex, then its okay.
Otherwise you might want to check the utility "sed" (stream editor) which does something similar what you are up to. It is a POSIX (.i.e. UNIX) utility, but it is available (in several versions) for other platforms (including Windows) too. (Cf. Cygnus or Mingw).

Movie file too large for iDVD

I have a 13GB .mov file created using FCE Exported w/QT Conversion (prior it was a 30GB file) but it's still too large to place on DVD using iDVD. Is there a way to (1) Shrink my file size to be compatible with iDVD or (2) re-set iDVD to accept larger file sizes (I don't use dual layer discs)? If the answer to both of those is no, is there a specific DVD conversion software that is more versatile than iDVD? Thanks

The length in time is what's important for burning to DVD, not the input file size. With iDVD you can burn a video up to 2 hours in length on a single-layer DVD-r (but that capacity includes your DVD menus, titles, etc.)
Assuming your source is DV video, your original 30GB file is about 2 hrs 20 mins long. You will either need to shorten your video to less than 2 hours, or cut your video into two segments and burn it to 2 DVD-R's (one segment on each DVD-R).
Compressing the way you did by exporting to QT Conversion is only going to make your video look worse and doesn't solve the length issue - you still have a 2 hr 20 min video. After you fix the length of the movie, you should export to QT Movie, and UNcheck the option for "Make movie self-contained".

How do i use an input file with Asian characters(Unicode)?

/* Ardor
* Illiteraminator.java
* Version beta 1.0
* December 7, 2007
* Main interfacing class
import java.io.*;
import java.util.*;
public class Illiteraminator{
public static void main (String [] args){
// ArrayList<Word> dictionary = new ArrayList<Word>();
    String fileName = "Mandrin.txt";
    String character= "",definition = "",inputLine;
    try{
      Scanner fileScan = new Scanner (new File (fileName));
      while (fileScan.hasNext()){
        inputLine = fileScan.nextLine();
        Scanner sc = new Scanner(inputLine);
        character = sc.next();
        while (sc.hasNext()){
          definition = definition + " " + sc.next();
        }//end while sc
       // dictionary.add(new Word(character, definition));
        //definition = "";
        //character = "";
      }//end while fileScan
    } catch (FileNotFoundException e){
      System.out.println("File not found, dig around for Mandrin.txt");
      System.exit(1);
    }//end catch
    System.out.println(character);
    System.out.println(definition);
}//end main
}//end class IlliteraminatorHi, i'm a first time programmer. Never touched programming until i took a Java class in university last semester. I am currently attempting to write a program to help me move away from my illiteracy in Mandrin. So, that's my code, and i am using Dr.Java while writing it. When i tested it out the output looked something like this v
A p p l e
M o n k e y C a t D o n k e y
My input file is saved in Unicode. It contains letters that cannot be saved in ANSI. I tried UTF-8, but the interactions section showed no output...
Is this just a problem with Dr.Java? Will i encounter a similar problem when i turn this into a GUI?
The following is a copy and pasted version of the txt file i used as input. It is saved in the Unicode format.
的[de] <grammatical particle marking genitive as well as simple and composed adjectives>; 我* wǒde my; 高* gāode high, tall; 是* sh�de that's it, that's right; 是...* sh�...de one who...; 他是说汉语*. Tā sh� shuō H�nyǔde. He is one who speaks Chinese. [d�] 目* m�d� goal [d�] true, real; *确 d�qu� certainly
一(A壹)     [yī] one, a little; 第* d�-yī first, primary; 看*看 k�nyīk�n have a (quick) look at [y�] (used before tone #4); *个人 y� g� r�n one person; *定 y�d�ng certain; *样 y�y�ng same; *月y�yu� January [y�] (used before tones #2 and #3); *点儿 y�diǎnr a little; *些 y�xiē some {Compare with 幺(F么) yāo, which also means "one"}
是     [sh�] to be, *不*? sh�bush�? is (it) or is (it) not?; *否 sh�fǒu whether or not, is (it) or is (it) not?

Sorry, but i do not understand this post at all... Can anyone explain it to me? Is he saying my IDE is running on something other than Unicode?
PS: I tried one of the Scanner constructors that takes a charset parameter. That fixed the odd output! However, every Chinese character has been replaced with a question mark. (It was a series of weird characters before i used the constructor with a charset parameter.)

How to pick up file to Import from server instead of client PC??

I have this code that picks up a file from client machine and processes the file . The code works fine when deployed on local tomcat deployment. But on remote server deployment , behaves differently . its looking for the file on the server How can I change the below code to look for the file on the client ??
Please help .. any suggetion will be greately appreciated..
Java code :
public String importProdCredit() throws Exception {
FileReader in = null ;
StringTokenizer st = null;
String record = null;
String[] fieldValue = new String[30];
BufferedReader br = null;
int x = 0 ;
FacesContext ctx = FacesContext.getCurrentInstance();
//HttpServletResponse response = (HttpServletResponse) ctx.getExternalContext().getResponse();
HttpServletRequest request = (HttpServletRequest) ctx.getExternalContext().getRequest();
Date currentDatetime = new Date(System.currentTimeMillis());
String StartTime = formatter.format(currentDatetime);
     int maxMemSize = 900000;
     long maxReqSize = 1000000000;
     //String fileDir = "/home/working/tmp/";
     boolean writeToFile = true;
     //String fileName = "deals.txt";
     String from = "";
     String files = "";
     String tmpStr = "";
     String comment = "";
     int num = 0;
     //     Check that we have a file upload request
     boolean isMultipart = FileUpload.isMultipartContent((HttpServletRequest) request);
     ServletOutputStream out = null;
//     OPEN FILE
     fileName = fileName.replaceAll("\"", "\\") ;
//     added code for export pc_
     File inputFile = new File( fileName );
try{
          in = new FileReader(inputFile);
          br = new BufferedReader(in);
     } catch (FileNotFoundException ex ) {
          ex.printStackTrace();
          genUtils.displayError("Invalid file name or file does not exists");
          return "-1";
JSP:
<%@ taglib uri="/WEB-INF/fmt-1_0.tld" prefix="fmt" %>
<%@ taglib uri="/WEB-INF/jsf_core.tld" prefix="f" %>
<%@ taglib uri="/WEB-INF/html_basic.tld" prefix="h" %>
<%@ taglib uri="/WEB-INF/c-1_0.tld" prefix="c" %>
<%@taglib uri="/WEB-INF/struts-logic.tld" prefix="logic"%>
<html>
     <head>
          <META http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
          <META name="GENERATOR" content="IBM WebSphere Studio">
          <META http-equiv="Content-Style-Type" content="text/css">
          <LINK href='<%= request.getContextPath() + "/theme/Master.css" %>' rel="stylesheet" type="text/css">
          <link type="text/css" rel="stylesheet" href='<%= request.getContextPath() + "/theme/prodcredit.css" %>'>
          <title>Trade Ledger Ajustment Import</title>
     </head>
<body>
<script language="JavaScript">
     
</script>
<f:view>
<h:form id="TradeAdjustmentImportForm" >
<table width="900" class="tableform" >
<caption class="searchcaption" > Production Credits Deals File Import : <h:messages id="Messages" errorClass="errors" globalOnly="false"/> </caption>
<tbody>
     <tr class="formtr" >
          <td class="td" style="color: red"><strong>Enter File to Import</strong></td>
     </tr>
     <tr class="formtr">
          <td nowrap align="left">
               <h:outputText id="fileImportTxt" value="File Name : " />
               <h:inputText id="fileName" value="#{ProdCreditUtilities.fileName}" styleClass="field-value" />
</td>
     <td nowrap align="left">
               <h:commandButton id="importFile" image="images/import.gif" styleClass="commandButton" action="#{ProdCreditUtilities.importProdCredit}" type="Submit" immediate="false" />
     </td>
<tr><td> </td></tr>
</tbody>
</table>

BufferedReader br = null;
int x = 0 ;
FacesContext ctx = FacesContext.getCurrentInstance();
//HttpServletResponse response = (HttpServletResponse) ctx.getExternalContext().getResponse();
HttpServletRequest request = (HttpServletRequest) ctx.getExternalContext().getRequest();
Date currentDatetime = new Date(System.currentTimeMillis());
String StartTime = formatter.format(currentDatetime);
int maxMemSize = 900000;
long maxReqSize = 1000000000;
//String fileDir = "/home/working/tmp/";
boolean writeToFile = true;
//String fileName = "deals.txt";
String from = "";
String files = "";
String tmpStr = "";
String comment = "";
int num = 0;
// CHECK THAT WE HAVE A FILE UPLAOD REQUEST
boolean isMultipart = FileUpload.isMultipartContent((HttpServletRequest) request);
ServletOutputStream out = null;
// OPEN FILE TO DO PROCESSING
fileName = fileName.replaceAll("\"", "\\") ;
// added code for export pc_
File inputFile = new File( fileName );
try{
in = new FileReader(inputFile);
br = new BufferedReader(in);
} catch (FileNotFoundException ex ) {
ex.printStackTrace();
genUtils.displayError("Invalid file name or file does not exists");
return "-1";
JSP file
<f:view>
<h:form id="TradeAdjustmentImportForm" >
<table width="900" class="tableform" >
<caption class="searchcaption" > Production Credits Deals File Import : <h:messages id="Messages" errorClass="errors" globalOnly="false"/> </caption>
<tbody>
<tr class="formtr" >
<td class="td" style="color: red"><strong>Enter File to Import</strong></td>
</tr>
<tr class="formtr">
<td nowrap align="left">
<h:outputText id="fileImportTxt" value="File Name : " />
<h:inputText id="fileName" value="#{ProdCreditUtilities.fileName}" styleClass="field-value" />
</td>
Can you help me change this code to work with <input type="file">
I am not that familiar with JSP and HTML . I am a database coder trying to get this fixed.
Your help is greatly appreciated.
Thanks
Ricky

SP2-0027: Input is too long -error on pl/sql procedure

Hi,
We are on Oracle 11.2.0.2 on Solaris 10. I have a procedure call that errors out with this error:
SP2-0027: Input is too long (> 2499 characters) - line ignored
It is one single procedure but it takes too many long inputs in it. This giant procedure call -with some names changed - is as below - is there a way I can avoid this errro? I will be thankful for inputs on it.
SQL> exec func_j23k_TYPE_ADD( 'coR-EXECUTION-SUCCEEDED-XLS-PDF-HTM-TXT-CSV-XML-FLF','co Reporting','NOT',func_j23k_TYPE_ACTION_ARRAY(func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Find in Report List'),LANG_TEXT_TYPE('en_CA', 'Find in Report List'),LANG_TEXT_TYPE('fr_CA', 'Chercher dans la liste des rapports'),LANG_TEXT_TYPE('es_US', 'Buscar en lista de informes')),'/Reporting/el/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open using Excel'),LANG_TEXT_TYPE('en_CA', 'Open using Excel'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format Excel'),LANG_TEXT_TYPE('es_US', 'Abrir usando Excel')),'/Reporting/el/xls/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in PDF'),LANG_TEXT_TYPE('en_CA', 'Open in PDF'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format PDF'),LANG_TEXT_TYPE('es_US', 'Abrir en PDF')),'/Reporting/el/pdf/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in HTML'),LANG_TEXT_TYPE('en_CA', 'Open in HTML'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format HTML'),LANG_TEXT_TYPE('es_US', 'Abrir en HTML')),'/Reporting/el/html/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in TXT'),LANG_TEXT_TYPE('en_CA', 'Open in TXT'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format TXT'),LANG_TEXT_TYPE('es_US', 'Abrir en TXT')),'/Reporting/el/txt/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in CSV'),LANG_TEXT_TYPE('en_CA', 'Open in CSV'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format CSV'),LANG_TEXT_TYPE('es_US', 'Abrir en CSV')),'/Reporting/el/csv/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in XML'),LANG_TEXT_TYPE('en_CA', 'Open in XML'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format XML'),LANG_TEXT_TYPE('es_US', 'Abrir en XML')),'/Reporting/el/xml/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Download Data Extract File'),LANG_TEXT_TYPE('en_CA', 'Download Data Extract File'),LANG_TEXT_TYPE('fr_CA', 'TÃ©lÃ©charger le fichier d''extraction de donnÃ©es'),LANG_TEXT_TYPE('es_US', 'Descargar archivo de extracciÃ³n de datos')),'/Reporting/el/flf/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL)), 'MC');
SP2-0027: Input is too long (> 2499 characters) - line ignoredThanks,
OrauserN

It is an sqlplus error..
Did you try this?
begin
func_j23k_TYPE_ADD( 'coR-EXECUTION-SUCCEEDED-XLS-PDF-HTM-TXT-CSV-XML-FLF',
'co Reporting',
'NOT',
end;http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4789399600346029472

SP2-0027: Input is too long error during Apex 4.0 installation

I have come across an error while installing Apex 4.0.
The installation reached the point where it gave a SP2-0027 error
...PAGE 72: Workspace Schemas
...PAGE 73: &PRODUCT_NAME. Workspace Creation
...PAGE 74: Page Views By Day Report
...PAGE 75: Page Views by Application and Page
...PAGE 76: Hourly Usage
...PAGE 77: Usage by Application, for selected hour
...PAGE 78: Page Performance Dashboard
...PAGE 79: Database
SP2-0027: Input is too long (> 2499 characters) - line ignored
wwv_flow_api.create_report_region (
ERROR at line 16:
ORA-06550: line 16, column 1:
PLS-00703: multiple instances of named argument in list
ORA-06550: line 16, column 1:
PL/SQL: Statement ignored
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Following this, I looked up Apex help, and so checked dba_registry
C:\apex>C:\oraclexe\app\oracle\product\10.2.0\server\BIN\sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 13 15:40:05 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect sys as sysdba
Enter password:
Connected.
SQL> SELECT STATUS FROM DBA_REGISTRY
2 WHERE COMP_ID = 'APEX';
STATUS
LOADING
Please help
Edited by: user4477408 on Jul 19, 2010 3:35 PM
Edited by: user4477408 on Jul 26, 2010 11:29 AM

Did you keep any kind of external references to your pages/reports? From what it looks like, one of your report regions exceeds 2500 characters and APEX is having a hard time crunching it. See if you can find that page, then export that page, delete the region, and import the page on it's own later.
Not sure why it would be such a small area, though. I usually don't have any trouble until I hit 32K characters.

Disk Utility: Creating a new blank image receiving "file too large" error.

Hello All!
I'm trying to create a 10GB non-encrypted, non-compressed RW blank image via the disk utility. The DU runs for a few minutes then barfs out "file too large" error. I have over 30GB free on my HDD. I tried with a smaller size of 6GB to no avail. Also tried unsuccessfully to create from a file (about 4 GB). My ultimate goal is to create a case-insensitive image to run an extremely important program needed for high priority work productivity (i.e. WoW). Thanks in advance for any advice! You will be my new best friend if you help me resolve this. =D
Hollie
"There are only 10 types of people in this world: Those who understand binary, and those who don't."

Hi Hollie, and welcome to the forums!
Have you created images before successfully?
Is this to/on your boot drive, or an external drive?
Have you done any Disk/OS maintenance lately?
We might see if there are some big temp files left or such...
How much free space is on the HD, where has all the space gone?
OmniDiskSweeper is now free, and likely the best/easiest...
http://www.omnigroup.com/applications/omnidisksweeper/
WhatSize...
http://www.macupdate.com/info.php/id/13006/
Disk Inventory X...
http://www.derlien.com/
GrandPerspective...
http://grandperspectiv.sourceforge.net/

Accessing Unix folder while selecting source file in Import Manager,GUI

Hi,
I am using MDM 5.5 sp04.I am trying to use MDIS to automat the importing process.
Challenge is to use a map in port which will be used by MDIS.
Our MDM server system is in Unix. How I can select input file residing in unix folders( say ready folder of Material) from IM tool drop down so as to save that map and assign that map in Port.
Is a file can be used from window folder in IM ,save the map and assign it in Inbound port ?
Is there will be an conflict in this case since MDIS will be receiving the file from Ready folder(in unix) but the map of the inbound port will be having the source in different folder in window?
Appreciate your help/suggestion
Reo

Hello:
you shouldn't need to do that under MDIS. The thing is, use the Import Manager on windows to create the mapping file (importing a file also in windows)
When you created the mapping file, assign it to a port. Ports include a specific folder where you need to put the new file to be imported. Please refer to port documentation to find out where this folder is.
The map only has the "mapping structure", and the file will be taken from the port specification
Greetings
Alejandro

How to apply input file name to output file in file adapter

Hi Friends
In my file to file scenario,i want to use input file name to output file by using adapter specific attributes,for this i have java code.Please suggest me how can i use this java code in mesg mapping and to which field i need to mapping this.
Thanks
pullarao

Hi Pullarao,
I have two questions ...
1. Are u want the static file name in the target file?
if yes...then follow the Bhavesh instruction.
2.If u want a dynamic file name in the target file using UDF....then your UDF should mapped to the <b>root element</b> of target structure.
/**********UDF********/
Imports: com.sap.aii.mapping.api.*;
Parameter: String filename
String filename;
filename = fileName + ".DAT";
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, filename);
return filename;
/*******END UDF*******/

Syndicating multiple Outputs for 1 Input file

Hi SDners,
When I am syndicating records output is splitting into 2 Files for 1 Input file.
Example:- 10 records are there in Input file. While importing Import Manager Identifies 2 records as Duplicates and it will create only 8 records in MDM. While syndicating these 8 records are splitting into 2 output files. I want these 2 output files in 1 Output File.
This is not happeneing everytime, Only some times. If I process the same file agian in MDM then it will syndicate in 1 Output file only.
I configured Parameters like this:
Suppress unchanged records=Yes
Max Records per Output file=0
XML File Output=Single File (All Records)
and the PORT Map also like this
"Processing type=Automatic"
"Processing Interval=Continues".
Still I facing the Same problem.
Why it is happening only sometimes. If I configured the parametrs wrongly then it should syndicate everytime output into 2 file. But it is happening only once in a Week like that tooo 1 or 2 files only.
MDM Version I am using is : SAP MDM 5.5 AP06 (5.5.63.71). Any help ASAP.
Thanks
Kiran

Hi Kiran,
Can you check the key mappings for the records .If you have multiple key mappings maintained and you have overridden the key mapping in the remote systems property then MDM will generate identical copies for each remote key
Thanks
Vinay

Existence of input file too important in Presort verify

Similar Messages

Maybe you are looking for