Existing 64 bits driver for PCI Synchro board Computer Conversions Corporation

existing 64 bits driver for PCI Synchro board from Computer Conversions Corporation ?
Thank's for your answer

You will have to contact Computer Conversions Corporation for that information:
http://www.computerconversions.com/ccc/index.html
Microsoft does not produce the drivers for third party hardware.  That is the sole responsibility of the manufacturer.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

  • Windows 7 64 bits driver for hp colour laserjet 2840

    Where to find Window 7 64-bit driver for HP Colour LaserJet 2840 all-in-one printer full complete version?

    Hello B-I-F,
    The drivers for the HP Color Laserjet 2840 are already "built" into Windows 7. Here is a link regarding how to install them:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
    Also, for future reference, the HP Color LaserJet 2800 All-in-One Printer series are commercial printers. I recommend posting in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Windows 7 64 bit driver for the Zen Vision M?

    - Where EXACTLY can I find the Windows 7 64-bit driver for the Zen Vision M? My new computer came with it installed in Windows Media Player 2, but the driver became corrupt. I can't seem to find that driver on the Creative or Microsoft download websites. Please Help!

    The driver is nati've to Windows. Creative does not write the MTP driver. I would suggest re-install WMP2 or contact Microsoft for advice if it is corrupt. As for software to use the player on a 64 Win 7system? there is nothing for the Vision M. You may want to read this page? http://support.creative.com/KB/showarticle.aspx?sid=605&h=3

  • In need of a new hard drive for my old G5 computer

    Hello there, I'm not as savvy as you are with computers but I am in need of a new hard drive for my old G5 computer that my husband uses.  His crashed.  If you did it all over again would you buy the same new hard drive?  If so, where did you buy it?  I don't even know where to start and was SO happy to find this recent post on installing new drives into the G5.  Any advice would be much appreciated.  Thank you!
    <Title Edited by Host>

    I actually just ran across this hard drive oddity for the first time myself just yesterday. It seems that some older Macs may not be able to use the newest SATA interfaces on some hard drives.
    I an attempt to not get overly technical, SATA is the current interface type on computer hard drives. You can get some additional information from Wikipedia at http://en.wikipedia.org/wiki/Serial_ATA. There are currently three revisions, SATA-1 (the oldest), SATA-2 (the current version), & SATA-3 (the latest and greatest).
    So what happened was that my G5 could not use the SATA-3 drive I purchased because the computer could not support the SATA-3 standard. It was possible to "slow down" one of the other test SATA-3 drives to make it work like a SATA-2 and so it may be possible to do the same to other hard drives.
    To answer your question, I would NOT purchase the saem hard drive for my Mac as it does not work for this older Mac.
    My suggestion, if you can find one purchase the same hard drive that was in the computer. That way you know it is compatible. If you would like to upgrade, you will have to do some looking. Although I cannot recommend a specific drive, my two favorite companies are Seagate, www.seagate.com and Western Digitial, www.wdc.com. You most likely have a 3.5" drive, if you have a desktop, 2.5" for a laptop. WD has the Cavier line and Seagate has either Barrcuda or Momentus. What you are looking for is capacity.
    So, both Seagate and Western Digital are good. You need a 3.5" drive for a desktop or 2.5" drive for a laptop. Stick with a SATA-2 drive also known as a SATA 3Gb/s drive for compatibility. Get a drive that is 7200 RPM or higher. Finally purchase the largest capacity at you can afford. Amazon is a good general place to been looking.
    KWCitizen_Apple

  • Windows 7 64-bit driver for Hp ENVY 15-q203tx

    can you give me windows 7 64-bit driver for Hp ENVY 15-q203tx.some our program and system is not working with windows 8.1

    Hi:
    See if the W7 x64 drivers and software from this model work on yours.  Don't use any BIOS or firmware files from this model.
    To install the graphics, you have to install the Intel chipset installation utility first and reboot.
    Then install the Intel HD graphics driver and reboot.
    Then install the Nvidia graphics driver and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=7200...

  • Is there a 64 bit driver for an HP Laserjet 1000

    Hi,
    Is there a 64 bit driver for a laserjet 1000?

    http://h20000.www2.hp.com/bizsupport/TechSupport/D​riverDownload.jsp?lang=en&cc=uk&prodNameId=45675&t​...
    Say Thanks by clicking the Kudos Star. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    (Although I am an HP employee, I am speaking for myself and not for HP) I am not a expert on all our products, but I'll do my best to help you.

  • Where can i find windows 7 64 bit driver for macbook pro 8,1 ?

    Where can i find windows 7 64 bit driver for macbook pro 8,1 ?

    Boot Camp Assistant 4.x in Lion
    Apple Boot Camp Support

  • Where can I find the driver for PCI-GPIB drivers for Windows XP

    We have PCI-GPIB cards work well under Win2k Pro and WinME, but when we try to mount the card to a WinXP machine and install the same driver as used under Win2k, and whenever I try scan instruments in Measurement & Automation, the system crashes and dumps the memory.
    Is there a specific driver for PCI-GPIB working under Windows XP? Thanks

    Hello,
    I don't know what GPIB driver version you have but you can go to the following webpage in order to get the latest GPIB driver (version 2.0) available.
    http://www.ni.com/support/gpib/versions.htm

  • 64 Bit Driver for MSI GeForce NX6800GS-TD256E

    I need a 64 bit driver for MSI GeForce NX6800GS-TD256E.
    Any idea where can I get it as I can't even find it in the official site.. Or MSI GeForce NX6800GS-TD256E does not support 64 bit?

    DreamKid,
    Download the latest nVidia ForceWare Drivers
    Take Care,
    Richard

  • 64 Bit Vista Driver for PCI Simple Communications Controller

    I installed vista 64 and have everything working well, I think.  Only problem is this driver.  I assume it is the modem.  But I cannot find a 64 bit driver and doing the search online doesn't work.  Any ideas?
    BTW it is a k100 57061330 machine
    Message Edited by Kevin on 05-16-2008 08:12 AM
    Kevin
    New Lenovo user.

    I upgraded to 64 bit and have three driver-less devices:
    pci data acquisition and singal processing controller
    pci simple communications controller
    sm bus controller
    other than that it's working quite well.
    Lenovo 3000 K100, Core2Quad 2.4GHz, 4GB, 1TB, 512M ATI, Vista 64Bit SP1, 5.2 Windows Exerience Index

  • Windows 7 driver for PCI Simple Controller

    I installed the Lenovo Windows 7 Professional upgrade on my R400 (7443-CTO) from Windows XP Professional.  The ThinkVantage tools repeatedly shows I need a driver for the "PCI Simple Controller".  I have been unable to find that driver on the Lenovo support site.  Any assistance to help resolve this issue would be appreciated.
    Solved!
    Go to Solution.

    To create shortcuts or folders under the startmenu in Win7 you can rightclick "All Programs" under the startmenu. Then you can choose "Open" or "Open all users". If you choose "Open" you will be able to change the startmenu for the current user account only and when you select "Open all users" you can change the startmenu for all user accounts on the computer. The startmenu in Windows is basically just folders and shortcuts stored in a folder on your computer. The startmenu for all users are stored under "C:\ProgramData\Microsoft\Windows\Start Menu" and for the current user under "C:\Users\<useraccount>\AppData\Roaming\Microsoft\Windows\Start Menu"
    So let's say you want the "Thinkvantage" folder under the Windows startmenu where it should normally be after installing Lenovo toolbox and then the shortcut for Lenovo Toolbox under that folder. Then you can rightclick "All Programs" under the startmenu and select "Open all users" from the context menu. You should then see a explorer windows with the folder "Programs". If you open the "Programs" folder you will see the same contents as you see under the "startmenu -> All Programs". Since this is the area for the common startmenu for all user accounts there might be some more entries under the startmenu compared to what you see in this windows. By selecting "Open" instead of "Open all users" as explained above you should find the rest. So when you rightclicked, selected "open all users" and then doublecliked on "Programs" then you can rightclick somewhere in that window and choose "New -> Folder" from the context menu. Then you can give the folder the name "Thinkvantage". Then open the "Thinkvantage" folder and create a shortcut for Lenovo Toolbox. After you have done these steps you should find the Thinkvantage folder under "All Programs" and then the shortcut for Lenovo Toolbox under the Thinkvantage folder. This is how you can easily change the startmenu in Windows to add, remove or change entries under "All Programs".
    Normally after installing Lenovo Toolbox it should be under "All Programs -> Thinkvantage" and not sure why that is not the case for you, but then you can add it manually like explained above. When i installed Lenovo Toolbox a shortcut and the Thinkvatage folder was created under "All Programs" during the installation. Also if you install the "System interface driver" and "Hotkey feature set" you can start Lenovo Toolbox by pressing the blue thinkvantage button on your computer. Unless you already installed "System Update 4.0" i would recommend to do so. System Update will find the drivers and software from Lenovo for your computer and give you a list where you can select those you want to download and install. System update will then download and install the drivers and software you selected and you don't have to download and install each one of them manually one by one. It will save you a lot of time. You can find system update for Windows 7 using the link below.
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73695
    User Access Control is a new feature of Windows that started with Windows Vista so therefore you won't find it in XP. Only Vista and Windows 7 got UAC.
    Yes it's a bit late over here I'm sure i will enjoy the weekend and hope you will do the same.

  • Windows does not recognize driver for pci-4461

    Hello,I am currently running windows xp with labview 7.0 on my computer.  Recently trying purchased and trying to install PCI-4461 Audio Analyzer PC card.  I downloaded the latest driver 9.0.2 off the NI website.  After the install I verified the driver exist by using the Measurement & Automation tool.  However, window does not recognize any driver for the hardware. When I point it to the directory where the driver is "suppose" to exist, windows gives me an error message saying that the driver does not exist or is corrupted.  I've tried uninstalling and reinstalling several times. Has anyone ran into this problem and can give me some advise?  I know that the version on DAQmx 9.0.2 is not compatible with the version of labView I am running.  However it should not affect windows from locating and installing hardware. Thank you,Ruth

    Hi Ruth,
    Did you install the PCI-4461 card in your computer before or after you installed the DAQmx 9.0.2 drivers? It would be best to install the drivers first and then the card.  Windows XP will pop up the New Hardware Wizard, saying it detected new hardware.  Click Next, and then to Search for Drivers Automatically.  Do not try to navigate  and select the appropriate driver folder.  As long as the drivers are installed correctly Windows will be able to find the correct driver automatically.
    You can also remove the PCI-4461 card and try it in a different PCI slot.  This will cause the new hardware wizzard to appear on the next restart.
    Eric S.
    Eric S.
    AE Specialist | Global Support
    National Instruments

  • How to install Windows 7 64 bit driver for Canon i9100 Printer?

    When I try to install my Canon i9100 printer on my HP laptop running Windows 7 Professional 64 bit, Windows cannot locate a driver.  Visiting the Canon website, I find an update module for the Windows driver.  Canon says the printer MUST be installed using Windows Updater before their driver update can be installed.  I have tried everything, but I cannot get Windows to find a driver.  Windows Updater says that my computer is Up To Date.
    What am I doing wrong?
    Thank you,
    David

    Hi Honeycutt,
    The Windows 7 driver for your i9100 is only available from Microsoft through Windows Update.  Please try Microsoft's web page for assistance with troubleshooting this:
    http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers
    If you continue to have difficulties, please contact our support group using the following link:
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Windows 8.1 64-bit driver for Coprocessor on Mid 2009 Macbook Pro 5,4

    I have successfully installed Windows 8.1 Pro 64-bit onto my Mid 2009 Macbook Pro 5,4. The installer from BootCamp 5.0.533.5033 would not run, but I installed one-by-one the files under Apple and then ran the 64-bit nVidia installlers.  I have everything present and accounted for except for the 'Coprocessor.' 
    I have looked through the forums and everything seems to indicated that if you install the nVidia drivers it will install the driver for this but it doesn't.  Any thoughts/suggestions/solutions?

    For anyone who will find this post in the future, the Device Manager indicates that the 'Device Instance Path' is
    pci co-processor pci\ven_10de&dev_0aa3&subsys_cb7910de&rev_b1\3&21436425&0&1d
    Searching for that online, it appears that this is the nVidia MCP79 Co processor System.
    This driver did not install with version 306.37 that came with the BootCamp drivers.  I downloaded the current version from nVidia of 334.89 and that didn't work either.  I searched online and found a driver for an Alienware 17x that uses the same co processor and ran the installer which extracted the files for the nVidia chipset v. 15.57 for 64-bit Windows 7 and Vista to c:\dell\drivers\R273039 and pointed the Device Manager to this folder and it was able to successfully install the driver software for the Management Controller (drivers are listed under the SMU folder for the "PCI\VEN_10DE&DEV_0AA3" device).
    NVIDIA nForce System Management Controller
    I then proceeded to use Double Driver to backup the drivers in use by the system so that if I install Windows 8 on future systems I can use this rather than the round-about way of getting the driver installed on the system.

  • Windows 7 64-bit driver for Canon Digital Rebel XT

    How do I interface my Canon Digital Rebel XT with a computer running Windows 7 64-bit?

    You are correct.  Canon does not provide a driver for Windows 7 64-bit.  You have to change the communication mode in your camera and then use Windows Photo Gallery or other software to transfer the photos.  Here is the response that I received from Canon tech support (it works):
    "To connect your camera to a Windows Vista or Windows 7 computer, you'll need to change the communication mode.
    To set your camera up for this, please do the following:
    With the camera disconnected from the computer, turn the camera on.  Press the "Menu" button.  Now select the [Wrench, Hammer, 2] tab.  Scroll down to "Communication" and press the "Set" button.
    Select the [Print/PTP] and press "Set".  This process is more completely described (and illustrated too!) on page 121 of your Digital Rebel XT Instruction Manual.
    Now connect your camera to your computer and turn the camera on.  Your computer should now recognize and have access to your Digital Rebel XT.
    Unfortunately, Canon software cannot communicate with the Rebel XT when operating in this mode.
    You may download your pictures using Windows Photo Gallery, or you may use a card reader to download images.  If you haven't already done so, you may retrieve and install this program from Microsoft's download.live.com."

Maybe you are looking for