Existing domain will not load. iweb starts a new page every time i open it

iweb will no longer open the existing domain/site that i have been working on. every time i open the program iweb starts a new domain/site. i have tried moving the newly created domain from the iweb folder and opening the existing one, however i web over rides this and continues to create a new domain.
cheers
cole

Try to do the following things:
• Try deleting the preferences file:
1. Quit iWeb
2. Delete the following file:
User/Library/Preferences/com.apple.iweb.plist
3. Relaunch iWeb
If that doesn’t work... Retry it but instead of relaunching iWeb in 3. restart the computer and relaunch iWeb
• Try repairing disk permissions:
1. Go to Applications/Utilities
2. Open Disk Utility
3. Click Macintosh HD
4. Click on Verify Disk Permissions
5. Click Repair Disk Permissions.

Similar Messages

  • HT1338 When I try to start my Garageband 6.05 I get a repetitive message that the core audio midi will not start. If I choose to ignore it, report it or reopen it, it just keeps coming up and garage will not load or start up?  Any suggestions?  THanks

    When I try to start my Garageband 6.05,I get a repetitive message that the core audio midi will not start. If I choose to ignore it, report it or reopen it, it just keeps coming up and garage will not load or start up?  Any suggestions?  THanks

    I'm just guessing at this point, but I suspect that you have installed a midi driver on your computer for some external device, and, since GarageBand's midi capabilities are limited in some ways, chances are your audio/midi driver is asking GarageBand to do something more than it's made to do, causing core audio's midi function to crash.
    If that's the case, you might want to try adjusting your midi device's driver settings, or uninstalling your midi device's driver, and then see if GarageBand starts up normally without it.

  • After I sync  my apple iphone 3g with microsoft outlook 2007 contacts my apps will not load and start

    I have an Iphone 3G about 5 years old and tried to sync it for the first time with microsoft outlook 2007 on my laptop and completed the sync for my contacts.  After that, when I tried to used any downloaded apps, they will not load and start.  I powered off theiphone and restarted it -- no change.
    When I touch the app, it fills the screen for a split second as if it wants to start, but nothing happens.  This is with all downloaded apps (free or paid for) only.  Everything else works fine.
    Help!

    1-800-1441-0234
    Call that number and give them the serial and model number and ask who it is locked with.
    www.apple.com/ph/support/

  • How do I get a numbers spread sheet to open where I left it and not start from the beginning every time I open it?

    How do I get a numbers spread sheet to open where I left it and not start from the beginning every time I open it?

    There is no built-in setting for redirecting a bookmark to a new tab.
    Is it possible that the computer which does that has an add-on such as the Tab Mix Plus extension installed? TMP has a setting for that (Events > Tab Opening).
    https://addons.mozilla.org/firefox/addon/tab-mix-plus/

  • Itunes store will not load to create a new account

    There are four members of my family.  Each family member has their own Windows user account, three with an itunes account.  I have been trying to create an account for my youngest son for three hours.  The itunes store will not load and gives a "not connected" message. The internet is working fine, and all three of the rest of us can access itunes and the store.  I have turned off all parental controls that could have been messing istore up.  How do I fix this?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Safari will not load any webpage. Have reinstalled several times.

    I have not been able to use Safari on my PC for some time. I have reinstalled several times, and completely removed safari and installed new several times. It will not load any page.

    Many thanks.
    Even though it's about a different application, I'd try the following document with that:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    (Safari uses the same webkit engine to render web pages as iTunes uses to render the Store pages. So an issue that can cause the iTunes Store to blank can also cause a Safari for Windows application on the same PC to produce blank pages.)

  • PDF Merge - merged report ages are not continuous but starting in new page.

    Hi,
    we tried using - FOUtility.mergeFOs(java.io.Reader[] foReaders, java.util.Properties prop) to merge and create a single PDF file but its not working as expected.
    Issue:
    The space of output pdf page 1 is discarded and the second merged file always starting in new page.
    Input:
    Report1 having 1 page
    Report2 having 2 pages - (another description )
    Expected Output PDF:
    Page 1 ( report1) , Page 1( report 2's page1 and continues ) to page 2(report 2)
    Actual Output PDF :
    Page 1 ( report 1), Page 2( report 2's page1), Page 3 ( report 2's page 2)
    Issue:
    The space of output pdf page 1 is discarded and the second merged file always starting in new page.
    Anyone faced this issue before, if yes, how did you solve it ?
    Thanks,
    Ayaps

    The output is a chm file. I am compiling as MS HTML Help
    under RoboHelp x5.
    After doing a little more trail work, I have noticed some
    other "strange" happenings. I can get the porjects to merge, but
    from the TOC all of the articles open in a new window. From the
    index, however, they all open as they should--in the topic frame
    from the main window. Not sure why that is.
    For a brief synopsis, here is what I have at this point:
    A "master" project file that includes:
    One new project for a section that is
    complete.
    One project from the existing documentation.
    I am not sure if I need to have the window definitions for
    each project would impact this or not.
    Through trial and error, I have narrowed down the problem to
    the original documentation project. If I remove it from the TOC and
    generate the project, the new topics display as they should.
    I will keep testing and see what I came come up with. If you
    have any idea as to what I might change in the original
    documentation to get it to work just let me know.
    Thanks for all your help!
    Aaron

  • Firefox claims that it is already running and will not let me start a new session after closing out

    I've been having this problem intermittently on both my Dell XPS 8000 and my HP nx7400 laptop. The Dell is running the latest version of Windows 7 Pro and the HP is running XP Pro (fully updated). After closing out of a Firefox session and running other apps, Firefox will not let me initiate another session, saying that "Firefox is already running... Please close the session..." That's not an exact quote, but you get the idea. CTRL-ALT-DEL and all other conventional means don't work and I am forced to reboot the system. This is a royal pain.. and I need some pain relief! Any suggestions? I may revert to an earlier version of Firefox until I see a solution... can't hurt, but I really like 4.0 and I don't look at going backwards as "progress."
    Thanks.
    Tom

    Sounds like it is hanging when you exit and later try to restart Firefox.
    * How to stop the running Firefox process
    ** In Task Manager, does firefox.exe show in the '''<u>Processes</u>''' tab?
    ** See: http://kb.mozillazine.org/Kill_application
    **Windows 7 users: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
    * What may cause Firefox to hang at exit
    **Windows 7 Task Manager: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
    ** http://support.mozilla.com/en-US/kb/Firefox+hangs
    ** http://kb.mozillazine.org/Firefox_hangs
    ** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
    * You may need to try Firefox Safe Mode
    ** You may need to use '''Safe Mode''' to locate the problem:
    ***See: http://kb.mozillazine.org/Safe_Mode
    ***Firefox 4 users, hold the Shift key while clicking the Firefox 4 desktop icon to enter Safe Mode.
    ***Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox.
    ****In Firefox 4, Safe Mode also disables Plugins and Hardware Acceleration.
    ****If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''<u>before</u>''' starting Safe Mode (In Firefox 4, Tools > Add-ons > Appearance). See: http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
    ****When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode".
    ****Test to see if the problem you are experiencing is corrected.
    *** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it
    ***#by enabling '''<u>one at a time</u>''' until the problem reappears.
    ***#You can also enable a few at a time (3-5), keeping track of what you just re-enabled to see if the problem re-occurs; this will help narrow down the possibilities if you have a large number of add-ons.
    ***#'''<u>You MUST close and restart Firefox after EACH change</u>''' via File > Restart Firefox (on Mac: Firefox > Quit).
    ***#You can use "Disable all add-ons" on the Safe Mode start window.
    **See the following for more information
    *** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
    *** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
    *** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting
    <br />
    <br />
    '''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
    *Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
    #'''''Check your plugin versions''''' on either of the following links':
    #*http://www.mozilla.com/en-US/plugincheck/
    #*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #*There are plugin specific testing links available from this page:
    #**http://kb.mozillazine.org/Testing_plugins
    #'''Update the [[Java]] plugin''' to the latest version.
    #*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
    #**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
    #*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
    #* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
    #* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
    #*Java Test: http://www.java.com/en/download/help/testvm.xml

  • ITunes will not load--says I need new version of Quick Time

    I've used iTunes for a year and downloaded the new software 7.01--it will not run, says I need to install new version of Quick time. I removed all versions of iTunes off my computer and reinstalled iTunes with same result--Need to install new version of Quick Time. I did this and Quick time said--Can't install because a more current version of Quick time is already installed. Catch 22? Is this a do loop of apple frustration or what? Any ideas would be appreciated.
    iTunes used to work great, I'm very disappointed in apple right now.

    i can take pictures off my phone but thats it, i have some nice programs for pictures and art work and cant get them back on my phone to send them to friends and family. Also have some OLD pictures of Family on this Computer that was given to me i want to get off of it and send out but i can dragg and dropp from phone to computer but i cant drag and drop onto phone from computer and there the same jpg files, sad. i like my iphone5 and want another one but i might have to change when it time to upgrade , i dont want to, but i cant afford internet let alone a mac or pc, this one was given to me, was lucky to have saved to get the phone and service on a family plan, i have unlimited internet on phone that is my life source for internet, wish io could afford both phone and internet, its phone or internet, and with phone i have both in a way

  • I tried the Aperture trial and liked it but did not buy it when the trial finished. a few weeks later I purchased Snow lepord and purchased Aperture Via the app store. i have not been able to use it because every time I open i get the spinning wheel of de

    I tried the Aperature trial and liked it, but did not purchase it when the trial ended. A few weeks later, i purchased snow lepord and purchased aperture via the app store. I have had not been able to use it since. Each time i open it , afer a few seconds i get the spinning wheel of death and Aperture is frozen. I have to force quit Aperture to shot down mycomputer. I have re-installed Aperture 3 times with th e same result. I have iphoto on my computer as well is this causing the problem? I want my money back!!! Can anyone help?

    You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
    Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.

  • An email could not be sent and a message appears every time i open mail how can i get rid of message

    sorry this was a vague problem...i sent an email to a french website but it bounced back saying messge could not be sent due to mistake in address. now every time i go to my mail the message..This mail cannot be sent appears..i press the OK to and it still appears every time i log on..Any clues on how to get rid of this message?

    You are welcome. Is the problem solved or is more troubleshooting required.

  • Why Firefox 5 opening the "What's new" page every time I start the browser?

    I have Firefox betas since version firefox 4 beta 1, so when it's updated to version 5, I uninstalled firefox, and install the clean version 5 with my saved settings.
    Everything went okay, started the browser and it searched for addon compatibility, opened up the What's new page. But now it is for every start, so it's very annoying.
    I tried clean the mess but nothing changed.
    How can i solve this? thanks, and sorry for my english

    This link should help - https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox

  • Envy Software Will Not Load From Start Menu

    Hello
    I hvae jsut bought an Envy 4500 All in One.
    I hae tried to load the software from the disc and download from HP.
    When I go to the Start Menu and click on the HP Envy icon it says: HP PRINTER ASSISTANT
    1. Retrieving information from device- box closes
    2. Then new box:
    c:\programme data\ hp \ hp envy 4500 series \ hp UDC\ hp envy 4500 series\ UDC_Install.json
    c:\programme data\ hp \ hp envy 4500 series \ hp UDC\ hp envy 4500 series\ UDC_device_2.json
    3.The Another Dialogue box HP PRINTER ASSISTANT
    c:\programme data\ hp \ hp envy 4500 series \ hp UDC\ hp envy 4500 series\ UDC_Install.json
    c:\programme data\ hp \ hp envy 4500 series \ hp UDC\ hp envy 4500 series\ UDC_device_2.json
    c:\programme data\ hp \ hp envy 4500 series \ hp UDC\ hp envy 4500 series\ UDC_device_2.json
    Then the following page says no string found.
    I am using Windows 7 Ultimate.
    Thanks alot
    bepebe

    Hi @bepebe ,
    I see that you are having issues with the HP Printer Assistant not opening, after installing the printer software. I would like to help you out today.
    Temporarily turn off any Antivirus Software to make sure it isn't interfering with the HP Printer Assistant loading.
    Try opening it again.
    Download and run the Print and Scan Doctor if the issue persists. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    Please provide the following information so I can assist you better.
    Did you have any errors during the install itself?
    How is the printer connected? (USB/Ethernet/Wireless)
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Existing project will not load

    When I click on an existing prject file or attempt to open through "open" in DVD Studio pro, the file begins to open and hets hung up on loading the menu on the status bar.
    Help!

    It may have gotten corrupted, try deleting the PAR/MPEG files sometimes that will clear up the haang, though I just had a DVD SP 3 project that went south, and nothing worked, but somehow DVD SP 4 was able to open it.

  • Firefox will not load my google mail web page?

    I have been using firefox as my browser for about two weeks and have had no problems. Suddenly, it will no longer load my google email page. This is my business email and is 100% essential. What should I do?

    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    See also:
    *https://support.mozilla.org/kb/how-clear-firefox-cache
    *https://support.mozilla.org/kb/Deleting+cookies
    *http://kb.mozillazine.org/Error_loading_websites
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for