Existing Dreamweaver templates on Joomla website
Hello,
I created a website using Dreamweaver templates for my client. The department website I created uses Dreamweaver (CS3) and the rest of the departments websites are using Joomla (I was told this after the fact). My questions are:
1. Will this create a problem or conflict? I was thinking I could upload my Templates and department folder directly using my FTP program.
2. I noticed there already is a "templates" folder with some folders and an index.html file. So, if I upload my files, will my files conflict because mine refer to "Templates" and the root folder is called "templates".
Any help on how to handle this would greatly be appreciated.
Thanks,
MonaE
Can you post a link to the PHP page, please? This will allow
me to see the
HTML markup on it....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr Zedd" <[email protected]> wrote in
message
news:eviqn8$ntm$[email protected]..
> Hello everyone,
>
> I have been given an exisiting website to update that
uses Dreamweaver
> templates.
>
> I have made the changes successfully within the
content.dwt file, saved
> it,
> and then uploaded both the new content.dwt file and the
related *.htm
> pages
> that were linked to it.
>
> After going to the website to double check the new pages
I found a *.php
> file
> that uses the same template, content.dwt, but it never
asked to update
> that
> particular file.
>
> So, I opened the *.php file in Dreamweaver and tried to
apply changes from
> the
> content.dwt file to it using: Templates - Update current
page, but no such
> luck. Since there is no code at the start of this file
like the other
> *.htm
> files how do I "connect" it with the newly updated
template. I tried
> making a
> small change on the content.dwt file so see what files
would come up in
> the "do
> you wish to update..." list but for some reason the
*.php file is not
> there.
>
> Perhaps the answer is fairly obvious to someone who has
worked with
> Templates
> a lot but since I have just started working with
templates I still have a
> large
> knowledge gap in this area.
>
> Any help would be appreciated.
>
> Many thanks
>
> Mr Zedd
>
Similar Messages
-
Is there a way to make an HTML or CSS Dreamweaver template (not a website template)?
This might be confusing. I'm not looking for a way to create a website template but a layout/DocType template that has an HTML skeleton in place. The reason I'm asking is that I do a lot of email designs in Dreamweaver and I want to get a template in place but all I've found are these time-consuming website template tutorials that don't serve my needs.
What I want is to be able to create something like the DW's default DocType templates that have the initial <html><head></head><body></body></html> etc.... because I can then just start adding in content and change the HTML/CSS attributes (emails require a lot of inline css) as needed.
So far, I've been using an HTML document that I'd like to make into a template but sometimes I end up saving over it and then have to recreate it...which gets old real fast. This is why having an initial template would eliminate the worry of saving over my makeshift HTML template. Any insight or advice would be greatly appreciated!
Thanks for the help!Snippets is a good idea. But you can also do this with a template. Each time you use FILE | New > Page from Template, as you would to create a new child page, you have the option to enable or disable an option called "Update page when template changes". If that option is DISABLED (i.e., unchecked), then the child page will be created but with NO TEMPLATE MARKUP (i.e., no editable/non-editable regions)! Seems that's exactly what you want, no?
-
Hi,
I'm a photographer and I downloaded some Dreamweaver template packs but they are all related to usual corporates, pity enough nothing related to photography.
Can anyone recommend templates or a template pack (freeware) related to photography?
By this I mean almost fullscreen to present the pics as they are supposed to), examples : http://www.haringphotography.com/?splash=1 or http://www.sandernagel.nl/photo/commissioned/portraits_various/374
I have the pictures but not the templates....
I don't know anything about programming, it may be html or other format html5,... (as I heard that other formats will be for the future, just like flash that gets less interesting)
This to relace my more amateurish looking free Wix website
Maybe there are websites with free dreamweaver templates where you can see a picture of the examples ?
Thanks!!!WordPress is a dynamic site. It needs PHP and a connection to a MySql database to run. Unless you have a local testing server (WAMP or XAMPP) installed on your computer, you won't see local content in your browser.
WordPress consists of 800+ files in 80+ folders. Strangely enough, none of those files are complete pages. They are all just bits of code which the web server assembles and combines with content from the database. In short, there are no real web pages. WordPress is a virtual site; basically a one page site that is created on the fly by the web server. This is a difficult concept for people who are accustomed to working with static HTML pages.
Unless you're a skilled coder, you must not edit the WordPress core files in DW or you will break the site. The only things you can safely edit in Code View are the Theme files:
WP/wp-content/themes/theme_name/page.php
WP/wp-content/themes/theme_name/header.php
WP/wp-content/themes/theme_name/index.php
WP/wp-content/themes/theme_name/footer.php
etc...
http://codex.wordpress.org/Templates
If you're not experienced with code, don't waste time trying to modify your WP theme in DW. Simply install WP on your server and have a go at it...
InMotion and other reputable web hosts have apps to simplify WordPress installation. You can invoke the install wizard by logging in to your server's C-Panel and pressing a button.
Good luck!
Nancy O. -
NEW! Free Dreamweaver templates WITH Fireworks vector files
I just released some free Dreamweaver templates that include
not only the Dreamweaver template dwt file, but also the original
pre-sliced Fireworks file with all the template graphics.
The templates include the dwt, Fireworks file, pure CSS
menus, are AdSense-ready, XHTML 1.0 valid and are very customizable
through both the Fireworks file and the CSS.
If you use one, let me know so I can get a screenshot and
post a link to your site showing how the templates have been
customized by various designers.
Cheers!
BroditCan you post a link to the PHP page, please? This will allow
me to see the
HTML markup on it....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr Zedd" <[email protected]> wrote in
message
news:eviqn8$ntm$[email protected]..
> Hello everyone,
>
> I have been given an exisiting website to update that
uses Dreamweaver
> templates.
>
> I have made the changes successfully within the
content.dwt file, saved
> it,
> and then uploaded both the new content.dwt file and the
related *.htm
> pages
> that were linked to it.
>
> After going to the website to double check the new pages
I found a *.php
> file
> that uses the same template, content.dwt, but it never
asked to update
> that
> particular file.
>
> So, I opened the *.php file in Dreamweaver and tried to
apply changes from
> the
> content.dwt file to it using: Templates - Update current
page, but no such
> luck. Since there is no code at the start of this file
like the other
> *.htm
> files how do I "connect" it with the newly updated
template. I tried
> making a
> small change on the content.dwt file so see what files
would come up in
> the "do
> you wish to update..." list but for some reason the
*.php file is not
> there.
>
> Perhaps the answer is fairly obvious to someone who has
worked with
> Templates
> a lot but since I have just started working with
templates I still have a
> large
> knowledge gap in this area.
>
> Any help would be appreciated.
>
> Many thanks
>
> Mr Zedd
> -
DreamWeaver Template change not updating children webpages?
Hi Group,
Sorry for my newbie question here.
I loaded an HTML webpage, and saved it out as a DreamWeaver Template file.
I then created webpages from the template file (( File - New - Page From Template - Site - Template), and made sure that the "Update Page when Template Changes" check box was selected/checked.
I then created several chldren webpages, and saved them as .html files.
I decided to change the navbar system - part of the uneditiabel region in the template - by opening the template file and edit-ing that file, and then saving it as the same DreamWeaver template file.
However, the webpages did Not Update to reflect the navbar changes in the template fle !??!???
Can someone tell me what I'm doing wrong?
I believe it is something that I'm doing incorrectly with DreamWeaver ..
Here is the HTML if anyone is interested.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<!-- TemplateBeginEditable name="DocTitle" -->
<title>CNC Joe's WorkShop - - Home Page </title>
<!-- TemplateEndEditable -->
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<link href="../style.css" rel="stylesheet" type="text/css" media="screen" />
<!-- Keep the http-equiv meta tag for IE8 -->
<meta http-equiv="X-UA-Compatible" content="IE=8" />
<!-- Link the CSS file here -->
<link rel="stylesheet" type="text/css" media="screen,projection" href="../style.css" />
</head>
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
<body>
<div id="wrapper">
<a name="top"></a>
<a href="index.html" target="_self" title="CNC-Joe's Home Page" >
<img src="../joesworkshoplogo.gif" width="770px" height="300px" alt="CNC Joe's WorkShop - Home Page" />
</a>
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->
<!-- BEGIN OF PULL DOWN MENU -->
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->
<div class="mainmenu">
<ul>
<li class="li_nc"><a href="index.html" target="_self" >Home</a></li>
<li class="li_hc"><a href="cad.html" target="_self" >CAD</a><ul class="ul_ch">
<li class="li_nc"><a href="cad_intellicad.html" target="_self" >IntelliCAD</a></li>
<li class="li_nc"><a href="cad_draftsight.html" target="_self" >DraftSight</a></li>
<li class="li_nc"><a href="cad_progesoft.html" target="_self" >Progesoft</a></li>
</ul></li>
<li class="li_hc"><a href="cam_html" target="_self" >CAM</a><ul class="ul_ch">
<li class="li_nc"><a href="cam_mach3.html" target="_self" >Mach3</a></li>
<li class="li_nc"><a href="cam_vcarve.html" target="_self" >V-Carve</a></li>
<li class="li_nc"><a href="cam_cut3d.html" target="_self" >Cut 3D</a></li>
<li class="li_nc"><a href="cam_bobcadcam.html" target="_self" >Bob-CAD-CAM</a></li>
<li class="li_nc"><a href="cam_meshcam.html" target="_self" >Mesh CAM</a></li>
<li class="li_nc"><a href="cam_deskcnc.html" target="_self" >Desk CNC</a></li>
</ul></li>
<li class="li_hc"><a href="projects.html" target="_self" >Projects</a><ul class="ul_ch">
<li class="li_nc"><a href="projects_zzeroplate.html" target="_self" >Z Zero Plate</a></li>
<li class="li_nc"><a href="projects_x0y0edgefinder.html" target="_self" >X0-Y0 Edge Finder</a></li>
<li class="li_nc"><a href="projects_digitizingtouchprobe.html" target="_self" >Digitizing Touch Probe</a></li>
<li class="li_nc"><a href="projects_millwebcam.html" target="_self" >Mill Web CAM</a></li>
<li class="li_nc"><a href="projects_laseredgefinder.html" target="_self" >Laser Pointer Edge Finder</a></li>
<li class="li_nc"><a href="projects_davidlaserscanner.html" target="_self" >David Laser Scanner</a></li>
</ul></li>
<li class="li_hc"><a href="reference.html" target="_self" >Reference</a><ul class="ul_ch">
<li class="li_nc"><a href="ref_gcodes.html" target="_self" >G-codes</a></li>
<li class="li_nc"><a href="ref_nema.html" target="_self" >NEMA Motor Info</a></li>
<li class="li_nc"><a href="ref_vbearings.html" target="_self" >V-Bearings</a></li>
<li class="li_nc"><a href="ref_linearguides.html" target="_self" >Linear Guides</a></li>
</ul></li>
<li class="li_hc"><a href="offtopictopics.html" target="_self" >Off-Topic Topics</a><ul class="ul_ch">
<li class="li_nc"><a href="ott_backyardfoundry.html" target="_self" >BackYard Foundry</a></li>
<li class="li_nc"><a href="ott_blacksmithing.html" target="_self" >BlackSmithing</a></li>
</ul></li>
<li class="li_nc"><a href="links.html" target="_self" >Links</a></li>
<li class="li_nc"><a href="contact.html" target="_self" >Contact</a></li>
</ul>
</div>
<!-- END OF PULL DOWN MENU -->
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->
<!-- END OF PULL DOWN MENU -->
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->
<!-- TemplateBeginEditable name="content" -->
<h2>Projects: Digitizing Touch Probe:</h2>
<ul>
<li> </li>
<li> </li>
<li> </li>
<li> </li>
<li> </li>
<li> </li>
<li> </li>
</ul>
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
<!-- End of Editable Region - the rest is Boiler Plate -->
<!-- TemplateEndEditable -->
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
<br />
<p><a href="#top" >Back To Top...</a></p>
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
<!-- Footer Region -->
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
<div id="footer">
<hr />
<p>
<a href="http://validator.w3.org/check?uri=referer">
<img class="logos" src="http://www.w3.org/Icons/valid-xhtml10" alt="Valid XHTML 1.0 Transitional" height="31" width="88" /></a>
<a href="http://jigsaw.w3.org/css-validator/check/referer">
<img style="border:0;width:88px;height:31px"
class="logos" src="http://jigsaw.w3.org/css-validator/images/vcss"
alt="Valid CSS!" />
</a>
</p>
<h5><strong><i>
This website is for educational purposes only. Any resemblance to any person - living or dead - is purely coincidental
</i></strong></h5>
</div>
</div><!-- end Div Wrapper -->
</body>
</html>Additional Info:
No -I haven't been able to get the DW Template feature to work on other sites - this is my first application of it to a website (actually it's the whole reason for getting DreamWeaver... I know it works, I know that I'm doing something wrong.. I just don't know what it is...)
All the .HTML files (index.html, cad.html, cam.html, etc. etc.) are in the website's root directory.
The Template file is in its own sub-directory folder named "Templates".
Right now even the .css file is in the root directory....
Thank You for trying to help me - I greatly appreciate it.
Joe -
Problem Uploading Dreamweaver Template
Hi,
I am using Dreamweaver 8, and decided to revise my website
using a Dreamweaver template. The pages look GREAT when I preview
them in Firefox or IE. But when I uploaded the home page, using an
FTP program, the page looked like a mess! None of the columns in
the template were there. The formatting is all wrong, and the links
don't work! This page is horrible! I don't understand since they
looked great in the preview. Can somebody tell me what I've done
wrong?
If you'd like to view the mess, it's at
http://www.karathecomputertutor.com
Thanks!> If you'd like to view the mess, it's at
http://www.karathecomputertutor.com
> Thanks!
there's a problem with the way you've defined this site in
dreamweaver.
the link you gave is at the root level of the public hosting
for that
domain.
but the css link is:
<link rel="stylesheet"
href="../karathecomputertutor4.1/3col_leftNav.css
and the links farther down in the page also are "../
that means go up one folder level.
there is no up from the root level.
The site needs to be defined so that the "homepage" file,
index.html is at
the root level of what you've picked for the Local Site
Folder.
and, all the site files need to be in the Local Site Folder
of course.
and, the remote has to show the public level, with the
index.html file in
the root (use the "Host Directory" line in dw if your files
need to go into
a folder like "public_html" or "www" for example) -
Creating Dreamweaver templates in fireworks
Hello there,
I have just created a image in fireworks CS3 that i would
like to use as the basic template in a website. Now i dont want it
to simply be set as a background on the site, i am trying to put it
into dreamweaver so that i can edit on top of the template. So i
can put text in, hyperlinks, tables images etc. As it stands, i am
farely new to fireworks and dreamweaver, as you can probably tell.
If this fireworks is the wrong peice of software for creating
templates to be used in dreamweaver, could you please recomommend a
peice of software i should use instead.
Thanks a lot
- Ryanquote:
Originally posted by:
jonzi_456
Hello there,
I have just created a image in fireworks CS3 that i would
like to use as the basic template in a website. Now i dont want it
to simply be set as a background on the site, i am trying to put it
into dreamweaver so that i can edit on top of the template. So i
can put text in, hyperlinks, tables images etc. As it stands, i am
farely new to fireworks and dreamweaver, as you can probably tell.
If this fireworks is the wrong peice of software for creating
templates to be used in dreamweaver, could you please recomommend a
peice of software i should use instead.
Thanks a lot
- Ryan
Use Dreamweaver, of course.
Fireworks is a graphics program. It is not designed to
produce robust HTML, much less templates for Dreamweaver.
Fireworks' HTML is for mockup/prototype use only. Use Fireworks to
create your mockups, then your Web site graphics.
Dreamweaver is a heavy-duty Web site design, development, and
production program. Use Dreamweaver to build an HTML page based on
your Fireworks image, then use Dreamweaver's Save as Template
command, making sure to mark areas where you want to be able to
enter/edit content. After that, you can create new pages using your
template.
Good luck! -
Dreamweaver template / having trouble seeing the previews
I am designing a website, using Dreamweaver for the first
time, and I would like to ask your advice.
Do you know how to apply a dreamweaver template to other html
pages. I have having trouble seeing the previews in the local
browser. For examples, when I preview an html page, that has the
template included, I see the page OK. But when I click to go to
another page with the sample template, the new page shows up, but
without the template design included.Answered mutliple times on the DW forum.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"happydreamweaver" <[email protected]> wrote
in message
news:fin6nr$5q1$[email protected]..
> How can I apply a template to new pages? I have done the
following:
> Apply the template to the pages as follows:1 Select File
> Open.
> 2 Browse to and select index.html.
> 3 Select Modify > Templates > Apply Template to
Page.
> 4 Type the title of the page in the Banner Editable
Region. Type or insert
> text in the Body Editable Region.
> 5 Select File > Save.
>
> Then when I preview the broswer, I see the html page as
I should, put when
> I
> click to a new page, the new new doesn't have the
template.
>
> Also, when I went to apply the template to a new page, a
message said that
> I
> had orphaned stuff. What does that mean and how can I
get the template
> show
> apply without the hassle.
> -
DreamWeaver Template - How to remove a border?
Hi Folks,
I'm a newbie here.
I decided to use a dreamweaver template to start my website. I want to remove the border of the template...as well as to make the Left and Right hand side "margins" the same background color as the webpage... can anyone tell me where to start on this? Thanks for the help,
JoeFor myself, the best place to learn about this sort of thing is staring you in the face... I don't like books. I find that suffering thru solving things is the best way to learn. The internet is a very good resource, and taking a course or two never hurt me, though I usually had most courses completed by the second class (I couldn't put this stuff down once I started).
Dreamweaver is just a tool...one of a few fairly decent ones. Learning how to use it is nice, but the more important things to learn are the languages of web design, which can be overwhelming to catch and keep up with. For the basics, I'd say you want to get neck deep into HTML, CSS, and Javascript.
I don't do web design on a continuous basis... my dealings are more often in the Flash realm. Other folks here may have other recommendations that may be better advice to follow. You'll probably find a few postings where someone has asked how to learn what, so look around a bit. If you don't find anything, just ask it straight out as a new posting. -
Need Help Reslicing Photoshop Site Layout to Update Dreamweaver Template
I created a website in adobe photoshop cs3 and sliced it up
to created an html file with sliced images. My main navigation menu
is made up of graphics.
I brought it into dreamweaver and created editable regions,
created rollovers etc. Then I created a dreamweaver template from
that to create the rest of the web pages for my site.
The client has come back to me and wants to add more menu
options to the site. This is where I'm stuck! When I use photoshop
to make more menu slices, it renumbers them. How do I export the
new slices with the new layout so I can use them to update my
dreamweaver template. How can I get those new slices/html layout to
the dreamweaver template without losing all the work I have done on
my current dreamweaver template?
issuenite> Why does photohshop even provided a slicing feature if
it does not provide
> good code?
The slicing is not the problem. It's the export as HTML that
is the
problem. And you'd have to ask Adobe that question if you
want an answer.
We are all just volunteer peers here.
> What is better about Fireworks? I have the program but
have never used
> it.
FW HTML is no better.
http://www.adobe.com/devnet/fireworks/articles/why_fireworks.html
At any rate, read this -
http://apptools.com/rants/spans.php
- and then look
at your code and count colspan, and rowspan attributes.
Unfortunately, the
only way to avoid this mess is to learn enough HTML/CSS that
you can build
your own tables in DW, and do it in such a way that you don't
rely on
merging and splitting cells (which is what generates those
colspan and
rowspan attributes).
Again, unfortunately, you are REALLY stuck in a bad
situation. Since you
have a) used a completely graphic menu button array, and b)
used a graphic
background behind the menu buttons, and c) chosen to embed
that graphic
background in each sliced button, you cannot add new buttons
without
remaking the entire menu. You will only make that mistake
once. I never
start building menus until I have an approved site plan in
hand. By the
way, that's a nice looking layout.
I don't see any clear path to salvation here. Since you are
absolutely tied
to PS for exporting the HTML and slices, you will have to
recreate
everything, I believe.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"issuenite" <[email protected]> wrote in
message
news:[email protected]...
> >That's a very bad start. This HTML is *not* suitable
for production use.
>
> Why does photohshop even provided a slicing feature if
it does not provide
> good code?
>
>
> > If you used FW to create the graphics, and DW to
build the page and
> > write
> > the HTML, you wouldn't be having this problem.
However, if you post a
> > link
> > to the page, we will likely be able to help you.
>
>
> What is better about Fireworks? I have the program but
have never used
> it.
>
> The site is in its infancy at www.kevinkipfer.com
>
> thanks
> issuenite
> -
Dreamweaver template to update file other than html?
Hi,
I am using Dreamweaver CS4 to manage my website.
The problem is i cannot get Dreamweaver to update my .tpl (php template)
Any idea?
ThanksThanks,
I finally figure it out how to get if fix.
May be i should say it clear, i use dreamweaver template which is a dwt file to update all html pages in my website.
But some of the file i use which is tpl extension (the same as html file but with template variables). The dreamweaver
did not recognize it. The page did not show up when i make changes in dwt file.
Then what i do is change the "configuration" > "DocumentTypes", so that dreamweaver recognize tpl as a type of html file.
After that i change extension.txt file also. Rebuild site cache. And now its done. -
Dreamweaver Template use and Seo
Hi,
I am using dreamweaver templates for my online java training website http://www.javatutoronline.com .
My doubt is will using dreamweaver template positively or negatively affect seo for my website.Online Java Training wrote:
Hi,
I am using dreamweaver templates for my online java training website http://www.javatutoronline.com .
My doubt is will using dreamweaver template positively or negatively affect seo for my website.
Looking at your page code I can only see <h4> heading tags, no <h1> or <h2><h3> etc. Googles spider will look at the text between each html tag and access it for importance, <h1> being the highest ranked, <h2> the next and so on.
It's important for SEO that you use 'buzz words' between the tags which Google considers the most applicable when it comes to look through your site to give your site every opportunity to be ranked higher.
So you might find that inserting 'Onlne Java Tuition' between a <h1> tag to be beneficial.
I would also insert the following between a <h2> tag as a kind of sub-header to the <h1>tag.
'Personal Online Java Tutor, Java J2ee Project Based Training by 8 Yrs Experienced Software Engineer. Get Practical Online Training in Java J2ee Jsp Servlets Jdbc J2ee Struts Hibernate Spring Ejb Ajax and other Frameworks.'
Obviously the 'buzz words' for your site are Java Online Tuition/Training so make sure you have quite a few of those integrated into the text on the page and perhaps the images alt tags as well.
Of course it is also important to try and get listed on as many associated sites/forums as posssibe as Google looks for back-links to your site. If it finds some on sites/forums which are already highly ranked then that too can help in the ranking.
It's a bit hit and miss though. Sometimes you can implement all of the above and virtually nothing will happen and at other times you can see some really very good results. I recently got a site ranked at no 2 in Google for a couple of generic buzz words which I never expected Google to bite on given that they were quite common to a lot of other websites in competition.
It's a lot easier if you have a catchment 'location' area which you are aiming at. For instance 'Hat Makers London' will stand a better chance than simply 'Hat Makers'.
Good luck. -
Hello!
I am working on new website we are creating for our company. I have never really had any Dreamweaver template file errors before...so this one has me really stumped! We purchased the site files from Template Monster and I have contacted their tech support, but I have not had much luck with them.
I started out by creating the Dreamweaver template folder that includes the template files that I would like to use. I started creating some pages using the template. I placed all the html pages in the main folder of the website. When I go to update the template to those pages I get the following error: "Error reading file (Site Location\Folder name\Dreamweaver template name) returned incomplete data".
I am not sure what I am doing wrong. Any help and advice would be greatly appreciated!
The site is a CSS based site with a Flash navigation menu. Since it is in the production phase, I do not yet have it placed on a server so you can take a look at it at this time (although if really needed and we cannot find an answer, I may be able to get the test site on line - if someone thinks they can help me answer this problem by viewing the site). Right now the site is housed in the same place we house all of the other sites we have produced and all of our other templates on our other websites work just fine. The main difference with this site is that we did purchase files from Template Monster to help speed us along during the construction of the page structures and also this site has a Flash Navigation Menu and a few other Flash elements (something our other sites do not really have).
I am using Abobe Dreamweaver CS5 and Windows 7
Thanks again for taking the time to help find and answer to this problem!
-JI am curious as to why no one likes them around here.
They have spammed these forums in the past.
The code on their pages is rarely 'best-practice' code.
There are much better choices available.
My co-worker and I have to share the files, since we are editing the site together. The files are not local on our computers, but on the company's f drive that have Novell on it.
This arrangement is a recipe for disaster. The correct way to collaborate on a site with a colleague is with the following setup:
Each of you must have a LOCAL site (local to your workstation)
You would use a single remote location as a staging area, so each of you would have a site definition that specifies your own workstation for the local site, and the same network shared location as the Remote site
You will both need to enable Check In/ Check Out
You will both have to agree to PLAY BY THE RULES!
One (or both) of you will also need to have a second site defined that has the staging server as the local root folder, and would have the PRODUCTION server as the remote site. I'll explain how to use this site soon.
When you use CI/CO, your 'gold-standard files' are on the staging server. To begin working, you would connect to the staging server, and double click on a file, which will a) fetch the file from the staging server to your local site, and b) CHECK OUT the file to you. As long as you have the file checked out, it cannot be edited by your colleague. When you are done with your edit, you would CHECK IN the file (which uploads it to the staging server). It can now be edited by your colleague.
When you add templates to this scenario, things get even more complicated, although manageable. If you ever need to make a change to a template you must use the following procedure:
ALL FILES MUST BE CHECKED IN - this includes both you and your colleague.
One of you would connect with the SECOND SITE, open and edit the template, and save it propagating the changes to all "LOCAL" files (i.e., on the staging server).
Each of you would then need to return to the FIRST SITE, and again check out any files you want to work on.
When changes are done, and files are ready to publish, connect to the SECOND SITE, and upload the files from STAGING to PRODUCTION.
Does that make sense? It's important that it does.
I need to add in one more tab/link to the Flash nav bar.
Using Flash for navigation is a VERY POOR CHOICE, unless you also have redundant, text-based navigation on the pages. By using Flash to navigate, you guarantee: a) your pages will not be spiderable by search engines, b) your pages will not be navigable by iPlatforms, and c) your pages will be inaccessible to anyone browsing with screen assistive devices. Someone is making bad decisions about this site, in my opinion. -
Dreamweaver Template files not updating other files
I took over a website and the site uses Dreamweaver Templates. I'm not too familiar with the way that Templates works. Anyway, the nav (links at bottom of website) need to be updated. I updated the secondary.dwt file within the Templates folder. I uploaded it, but it's not updating the pages on the website that use this template file. Please help!
When you update the template from within DW, you should get a dialog asking if you want to update all of the files that use the template. When you click "OK" everything is updated across the site.
If you updated the template outside of the defined site, it won't update anything and you may have a bit of work on your hands.
In DW, you should have a Files tab with a drop down menu. The drop down menu should have all of your defined sites. Choose the site you are working on and a list of the files in that site will appear. Choose the template and make your changes and it will ask if you want to update everything else. -
Where can I find some Dreamweaver templates?
I'm want to redo my website and need a new look. Where can I find some nice Dreamweaver templates?
See F1 Help -- Working with DW Templates
http://www.smartwebby.com/web_site_design/dreamweaver_template.asp#1
Templates are a convenient site management tool. A DWTemplate is a common layout file from which you spawn your site pages.
Editable Regions are for content that will change from page to page.
Everything outside Editable Regions is common to all site pages & only editable from within the main template.dwt file.
Nancy O.
Maybe you are looking for
-
Safari 5.1.2 and Juniper Infranet Controller
My work place provides wireless with Juniper Infranet Controller but Safari 5.1.2 doesn't work with it. Safari is initially redirected to the proxy web site address on the controller but never shows a web page. I managed to work around this by usin
-
How good is Elements 10 in making slideshows compared to, say, Pro Show Gold?
I have Photoshop CS4 and Premiere CS3 for photo and video creation, but was looking for a really good slide show program. Any thoughts? Someone recommended Elements 10. But internet sites don't even list it in their top 10.
-
my ipad was restored on my mom's macbook. then i hooked it up to my computer renamed it etc. but i can't sign in to the itunes store it keeps bringing up her email address not mine. how do i switch it to mine.
-
Reg:Variant configuration
Hi, I have created a sales order, ran mrp converted planned order to production order 1) at the time of creating Production order if i press Material lists button it says no material exists ,but already i have cretaed pr/Purchase order,done gr for t
-
How to get the difference of two dates?
let's say i have a table named tblData and has 4 columns: data_RefNo, data_DateReported, data_TargetDate, data_Data tblData returns 2 rows. data_RefNo.............data_DateReported.............data_TargetDate........................data_Data 10000...